Mosquito nets / Plunger
Prices for the production of plunger mosquito nets in Moscow
| Mosquito net fabric | Price, rub/m2 |
| Standard canvas | 1700 |
| Anti-cat (Pet Screen) | 3100 |
| Micromesh black/brown | 3100 |
| Maximum visibility Maxi Vision | 3100 |
| Antipollen | 4500 |
The cost of manufacturing plunger mesh is indicated. Pickup at metro station Rechnoy Vokzal. Production time 2 hours. The minimum cost for manufacturing a mosquito net is 1000 rubles/piece.
Today, mosquito nets for plastic windows have already gained popularity, but they continue to improve. As they say, if there is demand, there will be supply.
For example, difficulties arise in operating mosquito nets on windows where bars are installed. A plunger mosquito net is ideal for such windows.
Features of plunger mosquito nets
The design of this mosquito net is almost the same as that of conventional frame nets. The plunger mesh consists of the same components: mosquito net, aluminum profile, plastic corners, frame seal. But it differs from other types of mosquito nets in the way it is attached - it is attached to metal plungers.
Plunger
(from English plunge - dive) for a mosquito net - this is a spring piston, the length of which significantly exceeds the diameter. The plunger is mounted in the through hole of the aluminum profile of the mosquito net. In the free state of the spring, the plunger tip extends beyond the profile line by 1.5-2 centimeters.
Price:
Prices for frame mesh (standard) mounted on Z-shaped plastic fasteners. production + delivery (Moscow) + installation
| 1 PC | 2 pcs | 3 pieces or more |
| 2100* or 2600** | 1950rub/m2 | 1900rub/m2 |
| ** — Price 2500 rub/m2 in case of a specialist visiting for measurements. * — Price 2000 rub/m2 in case of production and installation of the mesh without a specialist first visiting for measurements. To do this, you need to do the following: 1. Make sure that your windows are not from a sophisticated profile (windows with a wide frame). Pay attention to the outside geometry of the frame; if yours is the same, please let us know and look below at the cost of such nets. 2. Measure and report the width and height of the sash (the opening part of the window), where the mesh is supposed to be installed (no need to open the sash, measure its height and width in the closed position). 3. Measure how much space is left for installing fasteners on top, bottom and sides (i.e. how many centimeters of the frame did not go into the wall (not hidden by a quarter of the wall). An example of what should be measured is shown in the photo (red arrows): View from the street, upper right corner. View from the street, lower right corner of the window Please note, in the left photo, the vertical side of the frame is deep in a quarter of the wall; if the top of the frame was also deep in the wall, it would be impossible to install the mosquito net on the Z-shaped brackets. | ||
*** Calling a technician costs 1,500 rubles; if the order is completed, it will be deducted from the cost of the order (i.e., free ). - if the repairman refuses to carry out the repair for any reason, the call is free ; - if the proposed repair price does not suit you, but is within the price list (on the website), the call is 1500 rubles.
***When ordering a grid with a brown frame, the cost of each will be: + 250 RUR/grid. *** When mounted on metal corners/spring pins, the cost will be: estimated amount + 500/1000 rub. accordingly. (a description of fastening methods is given below). *** The possibility and cost of installation on aluminum sliding balcony structures is determined on site or by telephone. *** Nets, in quantities of 1-3 pieces, are assembled on site (at the discretion of the master). Recommendations for caring for mosquito nets:
1. The mesh should be washed with a brush or soft foam sponge in warm water using ordinary household detergents (soap, powder).
The pressure of the brush/sponge on the mesh should be weak. Removed mosquito nets should be washed. 2. It is recommended to remove the nets in winter. The nets should be stored in an upright position. 3. Many have heard, and some have encountered, that sometimes in strong winds the nets fall. Sometimes this is due to improper installation of the mesh by residents after it was removed for cleaning. Namely, the mesh is installed on the lower plastic corners, and not in the groove between them and the frame
, as shown in the photo, in the section installing mosquito nets on plastic corners.
Less often, the fall of the mesh is associated with loosening or breaking of the mesh fastening. Very rarely, under the influence of a “strongly mysterious wind”, correctly installed nets also fall. To exclude this possibility, we use simple but fairly reliable insurance (not included in the price).
Installation/removal of plunger mesh
It should be immediately noted that plunger mosquito nets are not installed overlapping (outside or inside the window), but directly into the window opening. Therefore, the size of the mosquito net must exactly match the size of the window opening.
To install plunger mosquito nets, a hole is drilled in the window frame into which the plunger is fixed.
When all the measurements have been made, the mesh has been delivered, the holes have been drilled - it’s time to start installing it. Plungers are inserted into the drilled holes in the window frame (they stick out from the aluminum profile of the mosquito net), first on one side of the net, then on the other. To do this, you need to press the plunger head towards the middle of the mosquito net.
The plunger mosquito net is removed in the reverse order: press out the plunger heads on the right or left side of the net, then on the opposite side, and remove the net.
MOSQUITO NET FRAME MOUNTINGS
(495) 745-1360
Installed mosquito nets are held in place by various fastening systems, each of which is most suitable for a particular type of mosquito net, window design and material from which the window is made.
Let's consider this issue in more detail. Today, there are four main types of material and combinations of it from which windows are made. Accordingly, these are the windows:
*Wooden ("Stalinist", "bolted", double-glazed windows)
*Plastic
*Aluminum (hinged, sliding)
*Wood-aluminum windows. (can be any variety from those given in brackets)
The possibility of using one or another mosquito net attachment for each type of window is determined by the technician when inspecting the room.
Basic mosquito net attachments
Fastening Flag (Lamb)
| Practical and reliable. |
The advantage of this system for fastening mosquito nets, over fastening with plastic hooks (hooks), is reliability and ease of installation.
Advantage: Reliable and inexpensive fastening of the mosquito net.
Disadvantage : They are not installed on single-leaf windows or windows that have a blind (non-openable) sash next to the installation site.
Plunger fastening
Has a beautiful appearance and a long service life.
Made from stainless steel. The advantage of the plunger fastening of mosquito nets, over fastening with plastic hooks (hooks), is the ease of installation and removal of the mosquito net, as well as the guarantee that the net will not be torn off by the wind and, as often happens, it will not fall due to breakage of the plastic hooks with which it holds. Currently, plunger mounting is becoming increasingly popular. The plunger is a stainless steel metal pin adjustable in length, with a cap and a spring, which is installed directly into the frame of the mosquito net and is a new generation fastener. (top picture). The plunger fastening of the mosquito net is much more reliable than the plastic one
Advantage: it is a kind of lifesaver. Used on any type of window and allows you to make the impossible possible. This development is indispensable when installing nets on barred window openings, wooden, plastic, aluminum and wood-aluminum windows. It has proven itself excellent for use with Anti-Cat and Anti-Dust fabrics.
Disadvantage : Increased cost of the product
Metal “Z”-shaped fastening “On the mesh frame”
They are a reliable and convenient fastening, the only fastening that allows you to install mosquito nets without drilling window frames. They are successfully used for plastic and wooden double-glazed windows with a “closed” external contour.
Advantage: Metal “Z”-shaped corners are much more practical than plastic fastenings.
Disadvantage: It is not recommended to use it together with the Anti-Cat mosquito net because The bends of the fastening that hold the mosquito net are only 0.5 cm, are not designed for mechanical impact and can move along with the net. When using this fastening of a mosquito net with the Anti-Dust cloth, just as in the previous case, a tight fit of the net to the frame is not ensured (there is usually a 2-3 mm gap along the vertical part of the frame, which does not allow mosquitoes to fly through, but allows dust to penetrate) .
Plastic and metal “Z”-shaped corners
They have the same shape. Plastic, they are a standard mount for the mosquito net. Metal ones have a longer service life.
It is not recommended to use anti-cat mesh with mesh, since they are not designed for physical stress. When installed, the mesh is held only by the edge, which does not guarantee reliable fixation during physical impact. Screwed from the outside to the window frame. The corners are installed in pairs on the top and bottom or left and right parts of the frame.
Advantage: Low price metal: strength
Disadvantage: plastic: Unreliability metal:
No
It is not recommended to use it in conjunction with the Anti-Cat mosquito net because you risk losing the pet that jumped onto the net, along with the net and the net falling out of the window
With the Anti-Dust mesh, it is recommended to install it on the vertical parts of the frame, since during standard installation they do not ensure a tight fit of the mesh to the frame (as a rule, a 2-3 mm gap remains along the vertical part of the frame, which does not allow mosquitoes to fly through, but allows dust to penetrate.
Installation process of plunger mosquito nets (photo report):
Preparation for installation - it is necessary to drill holes in the window frame for the strike plates for the plungers. The design of the mosquito net is fixed on both sides by four plungers (more are possible if ordered individually), accordingly, there should also be four holes in the frame.
The holes are ready, now you need to fix special metal strikers in them:
We check whether our plungers meet the counter strips. Next, glue the brush seal to the frame of the mosquito net:
That's all, the net is installed, let's continue to enjoy life and fresh air!
The cost of delivery within the Moscow Ring Road is 1,500 rubles, measurement is 1,000 rubles. You can order a mosquito net by phone in Moscow:
+7 (495) 902-64-04
Mosquitoes for doors
There are two options for mosquito nets for doorways.
The first option has a framed canvas, but the second does not. Usually the pleated system has a frame mosquito net. It can be stretched onto a frame that is attached with curtains to the door frame. Frameless mosquito repellents are meshes, where the edges are reconnected with magnets or Velcro after a person passes. Frameless designs are simple and convenient both in installation and in operation.
In order to install an additional mesh door, you need to perform actions that are similar to installing a door leaf in a doorway. It is important to calculate with utmost accuracy the place where the frame and curtains should be installed. The elements are screwed to the door frame. For a tight cover, a magnetic latch is installed. Sometimes the latch may not have a magnetic base. Recently, manufacturers have been constantly improving their offerings.
What to do when you can’t reach the frame from the outside
Before you install the grid, you need to make marks on the outside of the window. This is often impossible to do. There is an easy way to solve the problem. Start by installing the fasteners from the top. After measuring, add 27 mm to the figure. The length you get is marked from the end on the mount from top to bottom. Next, you need to lean the fasteners against the marks made on the frame and secure them with screws.
When you have secured the fasteners at the top and bottom, proceed to install the mesh. Take it by the handles and hook it onto the fasteners at the top. Lift the mesh a little and at the same time lower it onto the fastening element below. Next, adjust the position of the product and level it.
If the instructions provided did not help and installing the product still seems like a difficult task, it is important not to waste time and contact professional technicians. When purchasing a mosquito net, it is wise to immediately place an order for installation.
