How to choose window fittings - comparison table

Many articles are devoted to the topic of choosing the right plastic window. In most articles, one or two paragraphs are devoted to the issue of choosing accessories. However, simple logic dictates that no matter what the quality of the PVC profile, the installation of a window in an apartment, or the quality of the double-glazed window, it will still be cold and uncomfortable if such a window does not close hermetically. This article will highlight the features and differences of 6 well-known global brands of window fittings from the point of view of the window user. So six accessories:

• ROTO NT
• SIEGENIA TITAN AF
• VORNE
• MACO
• ELEMENTIS
• INTERNIKA

Comparison of accessories

The table below shows parameters for comparison of six fittings. The values ​​of these parameters are given for a standard set of fittings for a sash with dimensions: width – 600 mm, height – 1300 mm. With a 2-chamber double-glazed window made of 4 mm glass and the weight of the assembled sash no more than 100 kg.

siegenia favorit reviews – advODKA.com

advodka.com

Adjusting hinges and locking pins

Russian reality shows that it is not uncommon for window manufacturers to fail to achieve ideal geometric shapes of the frame and sash during production. In addition, after installing the window, the sash may slightly change its geometry under the influence of its own weight (the so-called “sash sagging”). Adjusting window fittings helps compensate for these defects up to a certain threshold.

Separately, it is worth noting the possibility of adjusting the pressure in the lower loop. Often, blowing and freezing occur in the area of ​​the lower hinge (in winter) due to insufficient pressure. The reasons for this may be different and are determined in each case individually. In all the accessories under consideration, there is a lower loop with pressure adjustment (often called a 3D loop). But only VORNE, MACO and ELEMENTIS come with this hinge as standard. In the remaining fittings discussed in this article, a lower hinge with pressure adjustment can only be installed as an option that improves the standard configuration of the window

Seals

Seals ensure proper fit of the window sashes, and also increase its noise and thermal insulation.

The following materials are used to create window seals:

• Foam rubber. Suitable for wooden windows. Due to its moisture absorption capacity, it does not last long.
• Polyethylene foam. Also suitable for wooden windows. Unlike foam rubber, it does not absorb moisture as much, which means it lasts longer, does not expand and retains its shape.
• Rubber. Repels moisture and serves to create high-quality insulation from external negative factors. Rubber seals are made from silicone, thermoplastic elastomer and synthetic rubbers. This option is suitable for both wooden and plastic windows.
• Polyvinyl chloride. A good choice for those looking for a budget solution. The disadvantage of the material is brittleness at low temperatures.
• Brush seals. They consist of several layers, have a good level of rigidity and are suitable for all types of windows.

How to choose a window seal?

For wooden windows, polyethylene and foam rubber are often chosen, since they cost the least. For plastic and aluminum profiles, rubber, polyvinyl chloride and brush seals are optimal.

Trunnions

Trunnions are an element of fittings that perform the function of locking the sash in the closed position (the point at which the sash is pressed against the frame). Trunnions are standard and anti-burglary, rotating and static. They can also have different geometric shapes (round, oval, flat, etc.). The anti-burglary pin has a mushroom shape. All trunnions have pressure adjustment.

• Trunnion ROTO NT
• Trunnion SIEGENIA TITAN AF
• Trunnion VORNE
• MACO trunnion
• Trunnion ELEMENTIS
• Trunnion INTERNIKA

Instructions for self-adjusting window pressure “winter-summer”

Changing the pressure from summer to winter and vice versa is the only type of adjustment that we recommend doing yourself, since it is extremely simple and understandable. You can make it yourself, having only a hexagon.

First, you need to identify those places where you need to strengthen/weaken the vestibule. Locate the nearest locking element (locking pin).

Pay attention to the marker on the trunnion - a dot or notch. This is an indicator of clamping density. To ensure a tighter canopy “for the winter”, you need to turn the axle with a hexagon in such a position that the marker points towards the room (away from the frame), to loosen and switch to summer mode - turn the axle to the position “with the marker towards the street” (towards the frame ).

Congratulations on your purchase of windows equipped with high-quality modern ROTO fittings, which provide convenience and comfort in handling the window. For the correct and proper functioning of the window, you should remember some rules for handling fittings and follow the instructions for use.

Tilt and turn fittings ROTO (Roto) are construction structural devices for windows and doors with one control handle.

This fitting allows you to move the window sash by turning the handle into a swing (pivot) position or, thanks to the design of the “scissors” part, into a limited-tilt (turn-tilt) position. Tilt and turn fittings lock the sashes of windows and doors, and also bring them to various ventilation positions. When closing, the opposing sealing force must be overcome. Any other use of the fittings does not correspond to its intended purpose.

The operation of tilt and turn fittings is ensured only if its parts are not subject to increased contamination. Burglar-resistant windows and doors, windows and doors for wet rooms, as well as those installed in places with an aggressive and corrosive atmosphere, must be equipped with special fittings.

Additional design features that affect the ease of movement of the handle

The ease of movement of the handle has a great influence on the comfort of use of the fittings. As a rule, all fittings are designed in such a way as to ensure the easiest and smoothest movement of the handle. However, some manufacturers make additional changes to the design of the fittings to ensure even easier handle movement. The trunnions undergo changes; they are made rotating (SIEGENIA TITAN AF, VORNE, ELEMENTIS, INTERNIKA), which helps reduce wear on the locking elements; The fittings frame is made perforated (INTERNIKA) or given a special shape (MACO), which reduces the contact area of ​​the movable tire with the stationary fittings frame, which reduces friction.

Trident Series

The Trident model range is designed to equip window structures in which the sashes open outward. The functioning of mechanisms from this series of Siegenia fittings is carried out according to the principle of an anti-burglary drive and is based on the interaction of a trunnion with an additional hook equipped with a strike plate.

As an option, Trident drives can be equipped with child safety locks installed at the height of the handle on the locking side. In this case, when the window is opened, the restrictor comes into action, allowing you to limit the opening of the sashes to a width of up to 10 cm. When closing, it changes its position to the safety cocking, which ensures high safety during the operation of the double-glazed window.

Window hinges

Currently, the window fittings market is represented by hinges made of metal and PVC. Hidden type hinges cut into the frame, solving the problem of compatibility of the product with the window design. They last longer compared to a conventional mechanism, but replacing them also requires more time and effort. Many modern profile systems are equipped with anti-burglary hinge structures.

How to choose hinges for windows?

If you want to choose hinges to replace the ones you already have, you should pay attention to overhead hinges. If you live on the ground floor, we strongly recommend that you take a closer look at anti-burglary ones.

This is a basic, but far from complete, list of accessories for. In addition to the main elements, there are rollers, trunnion latches, locks and interlocks - their choice is usually based on finding a quality solution from a trusted manufacturer. You can always contact our consultants to learn more about window components and get advice in choosing the right mechanism.

Type

Glass fittings TITAN - official website and catalogue, pros and cons

Many people are scared even by the thought of using glass in the interior. After all, this material is a symbol of fragility and unreliability. Modern manufacturers are destroying stereotypes and creating not only especially durable glass, but also support and support for any glass structure - fittings.

produces reliable and durable accessories for glass, with which the structures will be unshakable for many years.

- manufacturer from Russia. And its products are available to residents of the CIS countries.

Offices and representatives of the company:

1. Central office: 115533, Moscow, Andropov Avenue, building 22. Working hours: 8.00 – 19.00 Mon-Fri. Telephone.
2. Far Eastern District: Artex LLC, Khabarovsk, st. Kim Yu Chena, 7b. Opening hours: 9.00 – 18.00 Mon-Fri. Phone (fax): 8(4212) 42-05-30.
3. Republic of Belarus: “STEKLOFURNITURA” 220141, Minsk, Nezavisimosti Ave., 177, office 30. Opening hours: 9.00 – 18.00 Mon-Fri. Phone: +375 (29) 633-51-55.
4. Republic of Kazakhstan: KingGlass LLP, Shymkent, st. Adyrbekova b/n. for magic "Gallery" ost. Repair zone. Phone: +7(705) 182-33-96.
5. Republic of Kazakhstan: Master Glass Company LLP, Almaty, st. Sary-Arka BC ARMAN, corner of st. Kenesary Phone: +7(771) 444-67-81.
6. Republic of Kazakhstan: SK Astana-Class LLP, Astana st. Zheltoksan 45 of 112. Telephone.
7. Republic of Tajikistan: “SOZMON GLASS” Dushanbe, st. Ahmadi Donish 5. Phone: (+992) 91 721 0000.

Quality and style are guaranteed by the manufacturer and tested by satisfied customers.

Among them:

• LLC "StekloStil";
• Samara Glass Company LLC;
• ;
• LLC "AlumStroy";
• Caverton LLC and many others;

is proud of its products and therefore constantly participates in exhibitions:

Only those who love and know their product work here. Employees are always ready to answer any customer question via phone, email, ICQ.

Advantages and disadvantages of the company

Before purchasing any product, it is worth considering in detail all the pros and cons.
Future customers will be attracted by the advantages of the fittings:

1. The largest range available on the market. The offered selection is adapted to any needs and projects.
2. Proven quality. All products have passed voluntary certification.
3. Durable metal. The following metals are used in production: chrome, steel, aluminum.
4. Different designs of similar models. The manufacturer offers a variety of coatings and designs.
5. Strength and durability. The parts can withstand repeated cycles of use.
6. Technical support. Detailed installation instructions are included with the product.
7. Online store. It is possible to familiarize yourself with the products and place an order on the company’s official website.
8. Affordable prices. The cost of products is an order of magnitude lower than that of foreign manufacturers.
9. Assembly at home. If you have a full set of fittings and ready-made glass panels, installation will not take much effort and time.

It is worth drawing the attention of a potential buyer to the following disadvantages:

1. Use indoors only. The manufacturer does not recommend using its products in open spaces.
2. Make a project. To successfully implement your intended glass structure, you need to have a project.
3. Low heat resistance. In shower enclosure kits, the seals can withstand temperatures up to 65°C.

Product Catalog

The assortment is overwhelming with its diversity even for sophisticated buyers. The most creative design project will come to life after viewing high-quality photographs of the product and a detailed description of it.

Each product position on the company’s website is supplemented with all necessary technical documentation.

It’s easier to understand all the variety of products in the form of the following list:

Pendulum doors

They open both inward and outward. Such doors are most appropriate in places with high traffic, and provide additional comfort for visitors. Two types of design: - “Classic” and “Vector”

Sliding doors

Door movements occur in one plane. The sliding system significantly saves space and adds modern style and aesthetics to any room.

Sliding door system series:

• "Aura";
• "Slider";
• "Delta";
• "Harmonic";
• "Vector";
• "Vector-mini";

Locks

The lock on a glass door can be located in the center of the edge of the door panel (central lock) or in the corner of the door leaf (corner lock). Depending on the type of design, locks can be mechanical or electronic.

Pens

produces the following types of pens:

1. Knobs. Small handles, often with a built-in lock. They are usually installed in private homes or small offices, since they are designed for low traffic.
2. Office. Most often they are made in the form of a bracket and are designed for the most convenient grip. Doors with high traffic demand such handles.
3. Handles with lock. The doors of boutiques and offices are equipped with such handles. It is most convenient to use on swing doors.
4. Handles to order. You can order a pen with a specific size, design and coating color.

Glass interior doors

The fittings set includes an aluminum door frame, side hinges and locks.

Closers for glass doors

The door closer system is designed to extend the life of the doors and provide additional comfort for visitors and employees. Usually the closer does not spoil the appearance of the door and does not attract attention.

Accessories for fencing

Fences are used in the design of stairs and balconies, as well as galleries and second light. Accessories for glass fencing are durable and easy to use.

Parts for shower cabins

The fittings for shower cabins are distinguished by their durability and ease of maintenance, as well as their resistance to moisture.

Glass structures

1. Clamping profiles. Used in the installation of fixed glass panels.
2. Connectors. Required for a variety of connections in glass structures.

Accessories for visors

Made of steel and does not corrode. Used in the installation of canopies and canopies.

Anti-panic systems

A special door system that opens with a light touch. Installed in large shopping centers and offices.

What is the price?

Of course, a system of discounts will be a pleasant bonus for the buyer:

1. Discount for bulk purchases. The official representative promises an individual discount when purchasing goods in bulk.
2. Discount for online buyer. By ordering through the online store you can save up to 3% of the total cost.
3. Temporary discounts on promotions. The manufacturer is generous and loves its customers, which is why they almost always run some kind of promotion that allows them to save on the purchase of a certain type of product.

The general pricing of products looks very democratic. explains this by its Russian origin and the full cycle of its own production. When comparing similar foreign models, the latter wins, which undoubtedly pleases customers.

Official website and reviews

The official website of the manufacturer is furnitura-titan.ru. It is worth noting that the site is amazingly thought out and adapted to the interests of any visitor.

The undoubted convenience is as follows:

1. Online store. You can not only view the products, but also order them.
2. Full information. The website contains all contacts of official dealers, telephone numbers and addresses. Also pleasing are the News and Articles sections.
3. Employee assistance. Consultations take place via ICQ, email and the forum.

The Titan brand is already familiar to customers and therefore many have something to say:

1. Nikolay, Samara. “The assortment is huge! No other competitor has this!”
2. Evgeniy, Moscow. “I have been a client of the company for 2 years. I am especially pleased with the pleasant service and affordable prices.”
3. Alexander, Moscow. “I am pleased with the prices and the warm atmosphere in the management team.”
4. Oleg, Petrograd. “The demand for products is growing! Isn’t this evidence of product quality?!”
5. Ilya, Yekaterinburg. “From time to time, shortcomings arise in the operation of the automatic door closer. I plan to discuss these problems with the manufacturer.”

Modern engineering and design ideas make it possible to use glass structures everywhere without fear of damage. Let Titan fittings serve as a guarantee of the durability of such structures.

househill.ru