The handle of the plastic window turns. The plastic window does not close: the handle does not turn in any direction


Why does the window handle scroll?

Do you have any questions about why the handle of a plastic window turns?
Call! 904-30-42 — We’ll tell you!
Let's help today! The main activities are:

— replacement of handles on plastic windows in St. Petersburg (St. Petersburg) and the Leningrad Region (LO).

— repair and replacement of fittings on plastic windows in St. Petersburg (St. Petersburg) and the Leningrad Region (LO).

We guarantee a prompt approach, high quality work and affordable prices!

How to independently determine what fittings are installed on a plastic window?

Fittings on a plastic window are modular type. To repair a window, it is enough to replace the broken part (module, block, unit).

In order to repair a window - replace the main lock (drive, gearbox) and, at the same time, not change the entire fittings of the plastic window, it is necessary to determine the manufacturer of the installed fittings.

Each module of plastic window fittings has a manufacturer’s mark (label, emblem). Open the window sash. Look carefully. Look for English letters. At the end, near the handle, you can see the manufacturer's mark (emblem).

The handle locked when turning

There is a situation where the door to the balcony is jammed due to improper operation. If at the same time the handle is sharply turned and the plastic sash is pulled towards itself, the locking mechanism is blocked. In this case, the canvas has only one support point, which is located in the lower corner.

The problem is resolved in different ways. If the fittings are marked Winkhaus, Roto or GU, then you need to find the metal tongue of the mechanism. It is located slightly below the door handle, but only on the end side. You will need to simultaneously move the lever to the open position and slide the tab so that it is vertical. You can then close the door by pressing it firmly against the frame and placing the handle in the closed position.

When the fittings are marked AUBI, the role of the tongue is played by a plate with a spring. And before you press the door tightly to the frame, you need to press the plate well against the seal. You can find the markings on the handle itself, on its mounting part.

Do-it-yourself replacement of the main lock (drive/gearbox) of a plastic window

Is it possible to repair or replace plastic window fittings yourself? Why not. It is not the Gods who burn the pots... While working, try not to completely break your balcony door. Everything is simple only in videos on YouTube. And when it comes down to it, a lot of nuances arise that no one will ever talk about anywhere. Our advice is to trust your windows only to experienced craftsmen who every day encounter and successfully solve certain difficulties that arise when repairing plastic windows!

It should be especially noted the recommendations of the manufacturers, who write in black and white in all accompanying documents (Care and adjustment instructions for rotary, tilt-and-turn, tilt-and-turn and tilt-up fittings; Fittings Catalog, etc.) that:

DO NOT use a plastic window with broken fittings

— damaged plastic window fittings need to be replaced URGENTLY

— ALL work on adjustment, repair and replacement of plastic window fittings should be carried out ONLY by specialists!!!

The seal is worn out

This problem may arise after 5 years of regular use of the door, but if preventive maintenance is not carried out, this time can be significantly reduced. The first signal indicating a loose door fit is drafts around the perimeter of the structure. Since the seal cannot be repaired, you need to remove the old one and go to a specialized store to purchase the same one.

You shouldn’t skimp on the seal, but buy a high-quality one from a German or Russian manufacturer, but under no circumstances a Chinese one.

Source

How to care for a plastic window yourself

Even a simple ordinary soap solution will easily wash the plastic profile of your entire window, or you can use degreasing detergents. But only wash the plastic window profile with a soft sponge, do not rub it with a hard surface. It is strictly forbidden to use abrasive and aggressive chemical compounds (which contain chlorine, acids, alcohol and other additives that actively destroy dirt). Even if at first glance nothing happened, after some time the color of the plastic may turn from white to grayish-yellow.

A double-glazed window in a plastic window is ordinary glass and needs to be washed like ordinary glass. Carefully, trying not to get detergents on the profile. It is important not to overdo it - so that the cleaning alcohol solution does not get on the rubber seal.

It is also important to regularly clean the drainage holes at the bottom of the window frame.

It is recommended that the rubber (rubber-rubber) seal of plastic windows be cleaned of dirt every six months, washed with soapy water and lubricated with silicone grease. This window element plays the most important role in protecting against drafts, noise and street dust. The Schlegel seal does not need to be lubricated.

What not to do

First of all, panic. Even if you are left on the balcony and cannot get into the room, there is always a way out. To solve any serious situation, you need to have a calm head.

There are certain rules to follow:

  • Do not break;
  • Avoid sharp objects;
  • Do not try to break the glass.

Using force unnecessarily can lead to disastrous results. Firstly, you can injure yourself and then you will no longer be able to reason soberly. Secondly, the door can be irrevocably damaged. But knowing its structure, the trouble can be eliminated with one or two easy movements.

Poking at the lock with sharp objects will most likely lead to nothing. It will only be a waste of time. And if you pry at the casing with something sharp, you can render it unusable. The appearance of the door will be spoiled, and the problem will remain unresolved.

Only panic in the head can cause thoughts of breaking glass. This is a very bad idea. The glass unit is strong enough to make this easy. In addition, confusion in thoughts will not allow you to perform the operation correctly. Injuries and unpleasant consequences are inevitable.

If there is a serious need to remove the double-glazed window in order to enter the room, you need to carefully dismantle it.

In a situation where a plastic balcony door is jammed, it is necessary to find out the reason. And only then decide what to do.

Helpful tips and tricks:

— if the slightest malfunction occurs in the operation of a plastic window, it is recommended to call a plastic window repair specialist. It is strictly forbidden to use excessive physical force to open (close) a plastic window!

— after repair and restoration work, it is recommended to carry out servicing of plastic windows twice a year (cleaning off dirt and lubricating fittings and seals).

Based on our many years of experience, we recommend to our clients:

- Roto fittings. Due to its quality, Roto fittings have long been well established in the market of metal-plastic structures. Fine-tuning the pressure of the plastic window ensures there is no backlash and increases the service life of all mechanisms.

— seals for plastic windows with the highest performance characteristics: REHAU 952 and KBE 228. They comply with GOST 30778-2001 and will last more than 15 years.

Frequently asked questions why the handle of a plastic window scrolls

We have collected here the most popular questions on the topic “the handle of a plastic window turns”; we recommend that you read the answers.

Question No. 1

Why does the handle of a plastic window scroll?

The handle of the plastic window turns

The handle of the plastic window turns, what should I do?

Answer:

The most important thing is not to panic! This broken plastic window can be repaired! Call and get a specialist to repair plastic windows in St. Petersburg (St. Petersburg) and the Leningrad Region.

Question No. 2

Window handle scrolls

The window handle scrolls, what should I do?

Answer:

Most likely, it was not the handle that broke, but the main lock of the plastic window. The main lock of the plastic window needs to be replaced and adjusted. Call and get a specialist to repair plastic windows in St. Petersburg (St. Petersburg) and the Leningrad Region.

Question #3

How much does it cost to repair a plastic window if the window handle is scrolled in St. Petersburg (St. Petersburg) and the Leningrad Region?

Maybe it’s easier and cheaper to install a new window than to repair the old one?

Answer:

The cost of repairing a plastic window depends on the fittings installed on the window. Installing a new window is no easier or cheaper than repairing an old one. Call +7(812)904-30-42 and call a specialist to repair plastic windows in St. Petersburg (St. Petersburg) and the Leningrad Region.

Question #4

What spare parts, materials and tools do you use to repair plastic windows in St. Petersburg (St. Petersburg) and the Leningrad Region?

Do you have spare parts, materials and tools to repair my plastic window?

Answer:

To repair plastic windows, we use only original spare parts, materials and professional tools. Yes, we have spare parts for your plastic window and we can fix it. Call and get a specialist to repair plastic windows in St. Petersburg (St. Petersburg) and the Leningrad Region.

Question #5

Do you provide a guarantee for the repair of plastic windows in St. Petersburg (St. Petersburg)?

What is your guarantee for plastic window repair work?

Answer:

Yes, we guarantee our work. There is a one-year warranty on repair work on plastic windows. Call and get a specialist to repair plastic windows in St. Petersburg (St. Petersburg) and the Leningrad Region.

Prices for repair (replacement) of plastic window handles and other types of work

The price for repairing a plastic window in St. Petersburg (St. Petersburg) is from 300 rubles.

Make your own calculation of the cost of repair and maintenance of windows and doors

collapseexpand
Window/door adjustment
Adjusting the sash of a plastic window400 rub.sash
Adjusting the plastic balcony door600 rub.door
Adjusting the window sash on the loggia (facade glazing)400 rub.sash
Adjusting the sash of a wooden window with double glazing400 rub.sash
Adjusting the plastic entrance door1000 rub.door
Adjusting the plastic entrance door closer700 rub.PC
Alignment of window sash geometry (repacking)700 rub.sash
Aligning the geometry of the balcony door (repacking)900 rub.door
Window/door repair
Repair of a plastic window sash (reassembly of fittings)1000 rub.sash
Repair of a plastic balcony door (reassembly of fittings)1200 rub.door
Repair of façade glazing window sash (refurbishment of fittings)1200 rub.sash
Repair of a wooden window sash with double glazed windows (rebuilding fittings)1000 rub.sash
Repair of a plastic entrance door (bulkhead fittings)1500 rub.door
Replacing window/door seals
Replacing the seal of plastic windows/doorsfrom 100 rub.p.m.
Replacing the seal of a wooden window with double glazingfrom 200 rub.p.m.
Replacing the façade glazing window sealfrom 200 rub.p.m.
Replacing the seal of plastic entrance doors150 rub.p.m.
Replacement of window/door fittings
Replacing the handle of a plastic window/balcony door300 rub.pen+work
Replacing the top hinge of a plastic windowfrom 1000 rub.hinge + work (pivot window sash)
Replacing the bottom hinge of a plastic windowfrom 1000 rub.loop+work
Replacing plastic window scissorsfrom 2000 rub.scissors+work (tilt-and-turn sash)
Replacing the main lock (drive, gearbox) of a windowfrom 2500 rub.drive+work
Replacing the top hinge of a plastic balcony doorfrom 1300 rub.hinge+operation (pivot balcony door)
Replacing the bottom hinge of a plastic balcony doorfrom 1300 rub.loop+work
Replacing the scissors of a plastic balcony doorfrom 2300 rub.scissors + work (tilt-and-turn balcony door)
Replacing the main lock (drive, gearbox) of a plastic balcony doorfrom 3000 rub.drive+work
Installation of clampsfrom 450 rub.PC
Installation of lock strike platesfrom 300 rub.PC
Replacing the hinge of a plastic entrance doorfrom 2300 rub.PC
Sealing window/door seams
Sealing the internal seam of windows/doorsfrom 200 rub.p.m.
Sealing the external seam of windows/doorsfrom 250 rub.p.m.
Window/door service
Converting winter/summer mode100 rub.leaf/door
PVC window sash service600 rub.sash
Maintenance of plastic balcony doors800 rub.door
Maintenance of wooden window sash with double glazing600 rub.sash
Service maintenance of façade glazing window sash600 rub.sash
Maintenance of a wooden door with double glazed windows800 rub.door
Servicing of a plastic entrance door1200 rub.door
Cleaning and lubrication of fittings200 rub.leaf/door
Window/door opening limiters
Installing a comb on a window/door300 rub.comb+work
Installing a comb on a façade window600 rub.comb+work
Installing a handle with a key on a window/doorfrom 700 rub.pen+work
Installing a child lock on a windowfrom 900 rub.lock+work
Installing an opening limiter with a cable1300 rub.lock+work
Installing a latch on a balcony door “smoker’s kit”900 rub.latch+work
Installation of the petal handlefrom 100 rub.pen+work
Installing a double-sided handle on a balcony door2000 rub.pen+work
Finishing of plastic windows/doors
Reinstallation of drainage system with foamingfrom 500 rub.PC
Installation of drainage systemsfrom 1000 rub.Job
Installation of window sillsfrom 1000 rub.Job
Installation of slopesfrom 300 rub.m.p.
Replacement of glass unit
Replacing a single-chamber double-glazed window2000 rub.sq.m.
Replacing double-glazed windows2500 rub.sq.m.

Other reasons

It happens that the plastic door to the balcony gets jammed during severe frosts. How to open it and why this happens will be useful for everyone who lives in regions with harsh winters.

You can get into this situation when the canvas is set to low ventilation mode. The contrast between external and internal temperatures leads to the appearance of condensation on the seal. Once the room is ventilated and the door is closed, the liquid freezes, tightly attaching the sash to the frame.

After some time, hot air from the batteries will allow the ice to thaw. But if you don’t have time to wait and you need to go out to the balcony urgently, you will have to use a hair dryer to dry your hair. It is necessary to walk with a hot stream around the entire perimeter of the door. At the same time, with the most minimal effort, pull the sash towards you.

After freeing the sheet from the ice captivity, it is necessary to wipe the seal dry. Then it needs to be treated with silicone grease. Such actions can be done in advance. This will prevent the ice from sticking to the surface. It happens that a foreign object gets into the locking mechanism. Then the handle cannot move through its full amplitude and the door remains locked. In this case, removing the swing arm will help.

The repair comes down to the following:

  1. The decorative strip is moved horizontally, the fasteners are unscrewed and the door is released from the handle;
  2. The hole can be cleaned well with a vacuum cleaner;
  3. Then you need to inject liquid from a can of WD-40 into it;
  4. The handle is inserted back and scrolled several times.

If none of the operations performed has brought a positive result, then it is necessary to call specialists. When an external analysis does not reveal the true cause, you will have to dismantle the door and completely disassemble it in the workshop.

Rating
( 1 rating, average 4 out of 5 )
Did you like the article? Share with friends:
For any suggestions regarding the site: [email protected]
Для любых предложений по сайту: [email protected]