How to independently remove a plastic door from its hinges on a balcony

Photo from the site okna-mich.ru In every house you can find a plastic door, which can be an entrance door, a balcony door, or an interior door. Such models are very practical, quite durable, easily fit into any interior style, and are also quite inexpensive. But even the highest quality polymer fabric needs to be dismantled periodically. This is done for various reasons, but in all cases this process takes a lot of time and effort. If you are not a professional and have never encountered the installation of a structure, do not panic. Our tips will help you cope with all stages as easily and quickly as possible.

In this article we will tell you how to remove the entrance and balcony plastic doors from their hinges, how to dismantle the linings, and also show all the steps in detailed photos and video instructions.

Features of installation of plastic fittings

Plastic fittings are very popular today. In apartments it is used as part of a balcony block. The plastic installation device is simple. The main parts of the fittings are the box and the canvas, which are secured with hinges. Most often, 3-4 loops are used during the installation process, which helps to evenly distribute the weight and load.

Accessories for plastic balcony doors

The door arch is supplemented with glass, so care must be taken when working with the material. When installing, the hinges are placed at the same distance from each other. To prevent the fastening parts from being noticeable, special plastic caps are put on them.

The fastening mechanism is divided into several types:

1. Card . For removal, use the standard method. To replace the material, you will need to unscrew the hardware.
2. Mortise . To remove it you will have to unscrew the entire mechanism. Such loops are practically never found on plastic structures.
3. Screw-in . Replacing and removing the mechanism follows the same pattern as with the card fastening.

Sometimes invisible loops are used. But to dismantle the balcony block they must be completely removed.

Repair kit

On the eve of work, it is better to purchase all the necessary materials in advance, so as not to waste time searching during the process.

You will need the following materials:

• New fittings to replace broken parts;
• Plastic gaskets;
• Liquid plastic and sealant (to eliminate scratches or cracks in plastic);
• If there are cracks in the glass unit itself, it is better to replace it. It is advisable to entrust the determination of exact dimensions to specialists.
• New insulation will be needed if the system was installed a long time ago (regardless of the presence of visible damage). In this case, the material can be replaced in advance to avoid problems.

When is it necessary to remove a plastic door?

From time to time it becomes necessary to remove the door leaf from the PVC structure.

This is necessary for repair work, as well as for a number of other reasons:

1. Damage to some parts of the balcony block. During regular use of the door, some parts tend to shift. Because of this, the door leaf does not close tightly, which leads to a draft.
2. Replacement of plastic block parts. The procedure is carried out if it is necessary to change hinges or fabric as a result of damage or aging of the old structure.
3. Expansion of the opening. Removing the door is necessary to transfer large items to the balcony.

During repair work, you can cover the door leaf with a special film. But during intensive work in the house (painting, varnishing floors), it is better to remove the structure for a while.

Elimination of scratches and chips

Plastic surfaces lend themselves well to restoration. Depending on the degree of damage, defects can be eliminated in several ways:

• Small scratches are masked using a special pencil or Cosmofen liquid plastic.

• Deeper damage and chips are filled with sealant or cosmetic glue. After the filler has dried, the surface of the canvas is sanded with fine sandpaper and covered with decorative paint.

Dismantling tools

To remove the plastic box, it is recommended to have a basic set of tools on hand.

With them, the dismantling procedure is faster:

• large wire cutters;
• scrap;
• screwdrivers of several sizes;
• Phillips screwdriver;
• dull nail;
• knife.

Some parts may not be needed. It all depends on the weight of the plastic product and the type of fastening.

Removing a plastic door from its hinges

When all the tools are ready, you can begin the dismantling process.

How to remove a plastic balcony door:

1. First you need to unscrew the upper and lower hinges. To do this, use a knife to pry off the plugs that hide the hinges.
2. Open the plastic door slightly, place a blunt nail in the top hinge, tap a little and knock out the axial cylinder. If this cannot be done, take pliers and pull the part down with turning movements.
3. Now you need to hold the door in a vertical position so as not to disturb the fastener design due to the fragility of the frame. At this stage, it is better to use the help of another person.
4. The door leaf is opened 90 degrees, after which it is slightly lifted up.
5. A crowbar must be used to remove the bottom pin. To do this, it is wrapped in thick fabric and pressed against the lower part of the structure towards the floor. Fabric protection is needed to prevent damage to the plastic. You will need an assistant during the process.
6. One person should tilt the plastic sheet slightly, and the other should hold it and prevent it from falling to the floor.

If you cannot remove the door block, you should dismantle its frame.

To do this you should:

1. Using a screwdriver or a sharp knife, disconnect the decorative trim from the plastic block.
2. Remove slopes. A sharp knife or screwdriver is also used in the process.
3. Clean the frame from polyurethane foam. A spatula is used in the process.
4. Unscrew the plastic box from the wall itself. You will need a screwdriver here.
5. Use a pry bar to break out the door frame.

The final stage is cleaning the walls from polyurethane foam.

Step-by-step algorithm of actions

The master will not need special equipment for this event, but he cannot do without an assistant. The algorithm for performing the work is as follows:

• It is necessary to clear the space where the plastic door can be placed after removal;
• It is necessary to remove the lining from the hinges, as well as the protective caps that tightly secure the mechanism. This will require some effort. You need to forcefully press the linings against the frame and turn them. The cap can be easily removed if you pry it off with a sharp, hard object, such as a screwdriver;
• The hinges need to be loosened. On modern fittings, you need to press them at the top. If everything is done correctly, the main pin will move down. It acts as a latch and if it is not removed, the loop will not give in. It is better to do the work with a tool, for example, pliers;
• After all the hinges are freed from the latch, together with an assistant you need to slightly lift the structure up so that it comes out of the grooves tightly;
• All that remains is to carefully tilt the door leaf towards you and remove it.

Replacing the mounting structure

It is necessary to replace the hinges when a faulty operation of the front door is detected.

To carry out the procedure you will need:

• pliers;
• hammer.

Any set of hinges is sold with instructions for use, so you must read them before replacing.

After this you can begin the process:

1. Remove the plastic plugs that cover the hinges. To do this, use a screwdriver.
2. Using a hammer and gentle tapping movements, remove the axle mechanism. It is advisable to keep the door ajar at this time.
3. Tilt the door leaf towards you. It is better to use the help of a partner, since the structure has considerable weight.
4. Raise the canvas a few centimeters and pull out the pin.
5. Now you can start replacing the hinges. To do this, the door leaf is lifted and placed on the pins in the door supports.
6. Secure the structure with a spring. It is advisable that the door is slightly open at this time.
7. Install the axle cylinder so that it is located below the hinge hole.
8. Press the cylinder so that it can extend beyond the hinge structure, but no more than 5 cm.

The final stage is the installation of decorative plastic caps.

Assembly of the structure

Balcony door design

When all the problems are fixed, you should begin the reinstallation process:

1. Take the door in your hands and place it on the hinges. It is necessary to hold the fittings level so that they do not warp.
2. Place the bottom loop onto the support pin.
3. Open the door without needing to lock the lock in the handle.
4. Start installing the axle cylinders.
5. Press down on the pin at the bottom of the mounting.
6. Tighten the fastening structure so that the door leaf closes tightly.
7. Put on decorative caps.

Before using the door, you should lubricate the hinges with graphite shavings. The procedure will help get rid of creaking and tightness when closing/opening.

Is it possible not to remove the plastic block?

If problems arise with the operation of plastic fittings, it is not always necessary to remove the door leaf. Problems can be corrected on the spot. In the process you will need a screwdriver and a wrench. The procedure for fixing a problem looks like this:

1. Remove decorative caps from hinges.
2. If the reason lies in the misalignment of the fastening structure, it will need to be corrected. This is done using a hex screwdriver.
3. Put the protective parts back on and try to close and open the door. It is advisable to lubricate the parts with graphite shavings.

If the manipulations do not help fix the problem, you will have to resort to removing the plastic block.

Recommendations

In conclusion, we note that dismantling the door structure must be carried out carefully.
If you are dismantling for the first time, be sure to carry out all work in the presence of a friend. The fact is that a beginner may incorrectly calculate the weight of the door, so during work he may accidentally knock it over. This is fraught with various problems - deformation of the door surface, breaking through glass, damage to the handle and others. If possible, ask a more experienced friend to help you with the repair. Removing doors from hinges Video

Proper care of a plastic door

To extend the life of plastic fittings, you should properly care for them:

1. Avoid contamination of the installation structure. Plastic is considered a moisture-resistant material, so it is permissible to wipe it regularly. It is better to carry out the procedure using wet wipes or a sponge soaked in a soap solution. After cleaning, be sure to rinse the fittings with clean water. If there are old stains on the door, remove them with washing powder and baking soda. The products are mixed in equal quantities, diluted with 2 glasses of warm water. Rinse the affected areas with the resulting solution. When deciding to wash the door leaf with specialized products, it is necessary to purchase products from trusted manufacturers.
2. Care is needed not only for plastic fittings, but also for the fastening structure. It is recommended to periodically coat the hinges and sashes with graphic shavings so that they do not creak and wear out prematurely. If the balcony is not glazed, the mounting structure is regularly exposed to dust and street dirt. This leads to wear of parts and subsequent breakdowns.
3. It is also recommended to take care of the seals. During operation, it is repeatedly exposed to drying out, so it needs to be periodically lubricated to clean it from dryness, dirt and subsequent stable operation.

Proper care will help ensure thermal insulation at the proper level.

How to properly process fasteners

In order for the doors to last even longer and not require repeated dismantling soon, it is worth carefully studying the care of the hinges. After removing the door, the hinges must be properly processed.

Don't miss: Aluminum sliding windows

The algorithm of actions is simple:

• loops are cleaned of excess dirt: debris, dust, feathers;

Reference! For better cleaning, you can wash them using gasoline.

• the surface is thoroughly wiped, all possible foreign elements are removed;
• Fasteners are lubricated using a special lubricant.

This lubricant can be purchased at any hardware store. It is sold in a very convenient container, which allows you to use it for processing loops without using additional equipment.

You can dismantle the plastic door yourself. Due to the fact that the material is very light, dense and not picky, it is easy to work with. Even a beginner can handle repairing a plastic door if he strictly follows the dismantling and processing plan. for those who need a clear example and a visual picture, they can turn to the YouTube video hosting site for a video.

Post Views: 810