Glass without streaks! TOP effective and safe ways to wash dirty glass

Many people think that cleaning the oven glass from grease stains is the simplest thing. But as practice shows, many people have difficulties with this, and how many scratches are left on the surface when using inappropriate products and compositions... To avoid such problems and get perfectly clean glass, study our tips and methods. And yes, absolutely no “chemistry”

Types of glass stains and features of their removal

Regular glass is not particularly durable, so sharp and hard objects are not suitable for cleaning. Household goods stores have special cleaning compounds, but you can make do with improvised products.

Traces of dried paint and plaster are cleaned off with a blade pressed to the surface at a slight angle. Alkaline chemical compounds are strictly not used.

Note: you can remove stickers from glass, paint stains and factory film using a special scraper equipped with a blade.

The choice of cleaning agent depends on the type of contamination:

• nitroenamel, enamel - acetone;
• polyurethane foam – solvent 646;
• masking tape – drying oil, turpentine, sunflower oil;
• acrylic paint - gasoline, white spirit;
• cement – ​​phosphoric acid;
• whitewash – cleaning cream Cif.

When using solvents, you need to provide ventilation and open windows. Chemical and folk remedies differ in effectiveness, taking into account the degree of contamination and their origin.

To make window glass less dirty, experts recommend:

1. Use silicone-based chemicals to protect against streaks after rain and snow. Silicone creates a film through which water flows.
2. Antistatic agents in detergents will reduce the amount of dust settling on the glass.
3. Kitchen glass will not fog up from condensation if you install a powerful hood.
4. Smoking indoors can cause yellow deposits to form on the glass. You can avoid it by frequent cleaning and going out into the open during a smoke break.

Old tape on glass can be removed in several ways:

• One of them is to glue a strip of new tape over the old one and remove it sharply. If the remaining adhesive tape is not completely removed, repeat.
• Another option is to wipe the glass with citrus or tea tree oil, then wipe it with a clean cloth.

If there are fragments of aluminum foil (installed for sun protection) or tinted solar film on the glass, you will need white spirit for removal. The smell of this and other solvents is very pungent, so providing a flow of fresh air is a mandatory cleaning rule.

Reference! Before applying the solvent to the glass surface of a window or door, it is better to test the effect of the chemical on a small, inconspicuous area. Sometimes glass becomes cloudy from too concentrated a solvent.

If there are pieces of paper, film or glue left on the glass surface, you will need a utility knife blade and dish soap:

1. First, the surface is moistened with foam and left for 10 minutes.
2. Next, use a blade to carefully remove dirt.
3. All that remains is to rinse with clean water and wipe dry.

Instead of microfiber and dry rags, you can use paper towels and newspapers. The latter are not suitable for matte surfaces as they leave scratches.

What not to clean

Sandblasting should be cleaned carefully. Not all products can be used to remove contaminants.

What you should not use to wash frosted glass on doors, cabinets and other interior elements:

• cleansers based on fluorine, silicone, acids;
• alkaline compounds;
• hard brushes and scrapers;
• abrasives (mustard, tooth powder);
• gasoline.

The use of these products will damage the sandblaster. Scratches form.

Window

Washing window structures consists of a number of sequential actions:

1. Prepare the cleaning area. The window sill and nearby furniture are freed from any objects that interfere with work.
2. Wash the frame and the space between the frames, openings, fittings, ebbs.
3. Moisten the sponge and rinse the glass to remove dust and dissolve contaminants.
4. Remove dirty water from the surface using a squeegee from top to bottom without applying much pressure to the scraper.
5. Walk the wet sponge over the glass again, collecting any remaining dirt.
6. Wipe the surface dry with a squeegee or soft cloth. Repeat.

All the manipulations mentioned above will take about 20 minutes. To make the result pleasing, you can use the following tips:

• It is better to wash the glass in the windows on a cloudy day to prevent the appearance of streaks;
• start cleaning from the room side of the window;
• do not use abrasives;
• After cleaning, wipe the glass with an aqueous solution of glycerin.

Baking and soda ash

Baking soda and soda ash are another warrior for fighting fresh stains. It is also quite good in combating traces of coffee and glue.

1. Wet a paper towel. You pour baking soda on it.
2. You clean the dirt.
3. Wash with water and wipe thoroughly with a soft cloth.

Glass in the doors

When planning to clean the door structure, it is important to consider that leaves and frames made of PVC, chipboard and plywood require careful handling. Materials are damaged by abrasive due to the sensitive surface.

It is advisable to prevent water from getting on the laminated MDF if there is no PVC edge. The material may delaminate. The coating will deteriorate from oils, acids, alkalis, alcohol and acetone.

Classic glass inserts are cleaned with window cleaner, and frosted glass with soft microfiber cloths.

Important! It is prohibited to clean frosted glass with fluorine-containing compounds. The element breaks the structure of the glass.

Store formulations

"Mister Muscle"

Just the name of a detergent often brings a smile, so tired of annoying advertising. But if you look through thematic forums and analyze the reviews of housewives, then most people prefer this cleaning product. This is one of the best options for removing dirt from frosted glass.

But "Mr. Muscle" is effective if the panel is only slightly dirty. It is powerless against a layer of dirt and oil stains. And the expense of funds turns out to be large; Taking into account the cost, use in such cases is hardly advisable.

Professional products

Household chemicals require compliance with the instructions for use regarding dosage, method of application and keeping on the surface. Particular care is needed when cleaning tinted and decorative glass, as well as surfaces with solar reflective and colored coatings. It is better to test the detergent on an inconspicuous piece of glass.

Reference: the most popular cleaning products on the market are: Mister Muscle, Sanita, Clin, Cif, Help. The compositions of the listed products have been developed and tested under industrial conditions. Advantages: the effect is almost instant, the product is evenly distributed over the surface, and there are no streaks as a result.

Step-by-step instructions for proper cleansing

The correct algorithm for cleaning glass with a matte surface is as follows:

1. Assessment of the type and level of contamination (grease stain, soot, soot).
2. Wetting the glass surface with water.
3. Selecting a device for cleaning glass (suede or microfiber cloth, a piece of soft cloth, a soft brush or scraper).
4. Treat with a safe cleaning agent.
5. Clean the glass first with a wet cloth, then with a dry cloth to avoid streaks.

The older the stain, the more difficult it is to clean glass with a frosted surface.

Folk remedies

Among “grandmother’s” methods of cleaning glass using improvised means, the most accessible and effective ones are selected below:

1. Table vinegar. Dilute 2 tbsp. l. vinegar in 1 liter of water. If the surface is very dirty, you can clean it with vinegar without diluting it with water.
2. Chalk. Helps to obtain radiance and shine. Chalk powder is diluted with water 1:3. Apply the paste to the glass with napkins. Once dry, wash with a soft cloth.
3. Ammonia is diluted in a ratio of 20 ml per 1 tbsp. warm water. Leave for 15 minutes, wipe with a rag along with dirt and plaque. Good ventilation is required.
4. Toothpaste removes limescale in small areas. The product is applied with an old toothbrush and applied to the spot and plaque. Repeat after 10 minutes, then rinse with water and wipe dry.
5. Potato starch. Dissolve in water in a dosage of 1 tbsp. l. for 1 l. Stir until smooth and use to remove even old stains.
6. Salt. Provides glass shine. Dissolves in water at the rate of 40 g per 10 l. If you wash window glass with this solution in the fall, they will not freeze in winter.
7. Potassium permanganate. The pale pink solution removes dirt well without leaving streaks.
8. Glycerin and rubbing alcohol in a ratio of 20:1 are suitable as a means to prevent glass from fogging.

When it comes to shower stalls, the dirt on the glass is mostly dried water droplets. In the future, the stains will turn into limescale. Drying the glass after each hygiene procedure will help reduce risks. Additional events:

• Ventilate the cabin;
• Wash regularly with suitable products;
• Apply a hydrophobic (water-repellent) coating.

To prevent limescale deposits on glass surfaces, they must be dried after contact with water. If tap water is very hard, install a filter at the entrance of the pipeline to the apartment. For cleaning, buy compounds that help, among other things, against limescale.

We use a steam generator

A steam cleaner is a universal cleaning tool . The device has many advantages. Among them are environmental friendliness, efficiency and ease of use.

Using a steam cleaner allows you to remove limescale without difficult scrubbing, even in hard-to-reach places. Some models of devices do not even leave condensation after treatment.

For mirrors and glass, a special nozzle and water distiller are used. As a result, the glass becomes clean even without the use of household chemicals.

If the glass is in poor condition, the treatment can be repeated. Or first apply a vinegar solution to the stained areas.

Rules for washing different types of glass

To avoid mistakes in finding the ideal glass surface cleaner, you should exclude:

• mixing ammonia with chlorine-containing compounds;
• use of ammonia;
• the use of soda and other abrasives.

Among the most popular types of glass in facade design, materials with coatings are often used: self-cleaning, low-emission, smart glass. The listed products require careful handling, since the film on the surface, if damaged, loses its characteristics and no longer provides the specified functionality.

When caring for frosted glass, it is advisable to use special spray products. To remove heavy dirt, you can try rubbing it with a cloth soaked in ammonia. Less caustic substances - vinegar, chalk solution.

Tip: to make frosted glass look beautiful, it is regularly wiped with suede or other fabric with lint.

Tinted glass with film is very sensitive to abrasives, acids and alkalis. It is worth familiarizing yourself with the manufacturers' recommendations for caring for glass products in order to choose the right product without causing damage.

How to avoid

It's no secret that cleaning glass is a tedious and time-consuming process, especially in those places where contamination occurs most often. While ordinary glossy glass can be protected from corrosive stains with a special film, it cannot be used on matte surfaces.

In this case, you can create an artificial homemade protective layer. The recipe for preparing the composition is very simple: mix water (50 ml), ammonia (5 drops), glycerin (100 ml). Mix all components thoroughly and treat the surface with this composition. There is no need to wipe with a dry cloth; let the surface dry naturally.

Preventive measures

To keep the glass always clean:

1. do not touch it with your hands, face, or body;
2. try to convince children that glass is not a toy, they should not touch it or play with it;
3. You should regularly wipe the glass with a dry cloth; it is better to give preference to suede;
4. there is no need to wash or regularly wipe the glazing with a rag or sponge with plain water - this will only leave stains.

It is impossible to completely eliminate greasy stains on frosted glass, especially when it comes to inserts in kitchen units. However, if you clean the surface regularly, at least once a week or two, the marks will easily come off and cleaning will not take longer. Neat glass and mirrors are an important touch in the reputation of the owner of the house.