How to wash plastic windows? Detergents - reviews, prices

Regular washing of plastic windows can significantly spoil the mood of the housewife.
Washing plastic, and even white plastic, is sometimes a thankless task, because with maximum effort you may not get any results at all. And vice versa - by following the simple recommendations of experienced housewives and window craftsmen, you can get an excellent result at a minimum of cost. Your windows will shine clean!

Selecting the necessary tools

If there are no problems with the procedure for washing ordinary wooden windows, then complications arise when using modern PVC products. The work must be done so as not to damage the surface of the frame. How to wash plastic windows and what tools will be needed for the procedure?

1. Detergent is the main cleaning tool. The final result depends on it. Savings are inappropriate here, otherwise, after the work is completed, dirty streaks will remain on the window, and the plastic surface of the frames will be damaged. Therefore, you should choose detergents with special care.
2. Window cleaning tool. Reminds me of a mop. Its purpose is to clean hard-to-reach places on the window surface. It is quite convenient to use. Usually the tool has a long handle, so it can easily be used to clean windows on the street side.
3. Sponge. With its help, the most severe dirt is removed from the surface of the window. It is better if one side is more rigid.
4. Textile. We recommend using soft fabrics such as cotton or linen. Before use, you should check it: if the fabric absorbs moisture well, it means it can be used for washing plastic windows.
5. Water container. You can use a deep bowl, bucket or basin.
6. Gloves made of rubber or thick fabric.

Application area

Most often, the product is used for its intended purpose - to clean plastic windows and window sills. It will easily remove all the pollutants listed above and return the windows to their original beautiful appearance. This is especially true after repairs, when residues of plaster, foam, paints, enamels, and varnishes may get on the white plastic.

Cleaners will help eliminate minor scuffs and scratches on windows that have been in use for a long time. In industry, Cosmofen is used in the manufacture of products from PVC, thermosetting materials, and thermoplastics.

Preparing the work surface

Once the detergent for plastic windows and basic tools have been prepared, you can begin preparing for the washing process.

1. Cleaning the window sill. The working surface must be free. Therefore, all objects (pots with flowers, decorative elements, etc.) should be removed from the windowsill.
2. Tools prepared for work should be placed on the windowsill in such a way that you can always reach them.
3. Pour water into a container and place it on the windowsill.

Now you can proceed directly to the window cleaning procedure.

Security measures

Cleaners should be stored in a place inaccessible to children. Smoking is strictly prohibited in the work area; there should be no sources of fire nearby.

You should work in a well-ventilated room; vapors from cleaners are harmful to the respiratory system. Do not allow liquid to come into contact with eyes or skin. Hands or other areas of skin upon contact are washed with water, eyes are washed, and then seek medical help. If the product gets into the gastrointestinal tract, you should not induce vomiting; you should immediately consult a doctor.

Choosing the right detergent

So, how to wash plastic windows? The modern market for household chemicals is so wide and varied that it is very difficult for a modern housewife to make a choice.

• To clean the window surface itself, you can purchase regular glass cleaning liquid. The main thing you should pay attention to when purchasing is that the label should contain the inscription: “no streaks.” Many housewives recommend using Mister Muscle or Clean products as the most effective. They are in the mid-price category and are quite affordable to purchase even on a modest budget.
• To clean the PVC profile, you can use dishwashing detergent. "Fairy" or "AOC" will do. The product should be applied to a sponge and lightly moistened with water. The liquid removes well not only dirt, but also stains of grease and mold.
• If a layer of sun protection is installed on the glass unit, the window should be washed with special care. Detergent for plastic windows with protective film should not contain abrasives or alcohol. It is recommended to use only mild products without additional additives.

Washing double glazed windows

Cleaning a double-glazed window from dirt is not so difficult. And using a professional tool from the arsenal of cleaning companies, you can handle it in a couple of minutes.

First, prepare a foam solution, for example, with dishwashing gel. Dip a non-abrasive sponge in it, squeeze out so that the water does not run off, and wipe the surface of the glass unit with horizontal movements. If you use store-bought household chemicals, apply the product to the glass with a spray bottle and also rub it with a sponge on the glass using horizontal movements. Pay special attention to the area along the glass unit where most of the dirt accumulates.

Now use a tie rod (also called a scraper). Place it firmly on the glass and drive off the water using vertical movements. Thanks to the rubber nozzle, the tool will handle this quickly and without streaks. After each pass of the screed on the glass, wipe its working surface with a dry cloth - this way you will get the perfect result. Make each new pass of the screed overlap with the previous one. Finally, after the glass surface is completely clean, use a cloth to wipe the bottom of the frame to remove any stains and move on to the next surface. After you wash all the glass, you only need to wipe the window sill.

Related article: Curtains for a country house with small windows

Now that you know what and how to clean plastic windows from dirt and yellowness, it will not seem so laborious and tedious. And the result will delight you for another six months.

How to clean plastic windows

If there are usually no problems with glass cleaning agents - you can use almost any liquid, then problems usually arise with cleaning the PVC profile.

What products should I use to clean plastic windows so as not to damage the plastic surface?

The following materials cannot be used to clean PVC products:

• liquids containing gasoline and acetone;
• powdered products;
• The main composition of the liquid should not include abrasive substances.

How to wash plastic windows? The plastic surface can be cleaned with a soap solution or a plumbing fixture cleaner diluted with water. Experienced housewives recommend using Domestos, Sanita, and Sif for washing sinks. They cope well with any type of dirt and do not damage the plastic. Their cost is quite affordable for purchase by all categories of the population.

How to remove stubborn stains and various contaminants from plastic frames and window sills, as well as glass

Tape stains

As we wrote above, products from your kitchen are well suited for this purpose - vegetable oil or vinegar, as well as tape or a school eraser.

Foam stains

These are the most problematic stains on plastic and glass on windows. We do not recommend using rough scrapers and abrasives - you will ruin the surface forever!

1. If the polyurethane foam has not yet hardened, use a scraper (preferably plastic or wooden) to scrape off as much of it as possible. Then treat the foam stains with Cosmofen solvent - it will not cause damage to glass and plastic. After removing any remaining stains, wipe the surfaces well with a soft cloth, and then wash with soapy water.
2. Already hardened polyurethane foam can be removed using the well-known pharmaceutical drug “Dimexide”. Apply it undiluted to the foam, wait up to 5 minutes, and then carefully remove parts of the foam using the hard side of a dish sponge. Repeat the procedure until the foam is completely removed. If the surface of the window sill is glossy, remove the last layer not with the abrasive side, but with the soft side of the sponge, so as not to leave unsightly scuffs.

Paint splashes on glass or windowsill

Do not rush to clean them with a knife, try a more gentle method - using stationery silicate glue.

Apply a drop of glue to each paint spot and let the glue dry completely. Then use a dry sponge to remove the glue bumps - the paint will come off along with them.

Stains of plaster and cement mortar

These substances are themselves abrasive. If you rub them vigorously, abrasions may remain on the plastic or glass.

Stains of building plaster, primer, putty or cement can be removed after a good soaking. Wet them with a soap solution from a spray bottle, and you can put a napkin moistened with soap and water on the windowsill. Wait a while, then use soft cloths to wash off layer by layer, rinsing the fabric all the time.

Particularly stubborn stains can be pre-soaked with 6% vinegar and then washed off with clean water.

Traces of flies

This type of stain can be easily removed with onion juice.

Cut the onion and use the cut to treat stains. Then wash the surfaces with soapy water or any detergent.

Detergents for plastic windows. Recommendations from housewives

Modern housewives recommend using the following cleaning products for plastic windows:

• Detergent "Sanita". Does not contain active chemicals. It removes old dirt well and does not damage the plastic surface of the frame.
• "Mister Muscle". Excellent for cleaning double glazed windows. Does not leave streaks or stains. The windows acquire a mirror-like shine and shine.
• Universal rag “White cat”. Cleans glass units well from dirt. Can be used together with detergents or simply moistened with water. The soft surface of the fabric does not damage the PVC frame and glass unit.

Cleaner Cosmofen - description of the product

Cleaning products for plastic windows under the Cosmofen brand are liquid materials with the addition of a solvent that slightly soften surfaces. The cleaner looks like a colorless, transparent solution; it contains a mixture of carboxylic acid esters that can dissolve dirt and clean plastic.

Cosmofen 10 or 20, other means provide the following actions:

• remove dirt, grease, markings, glue, sealant, resin, and other contaminants that have penetrated into the upper layers of PVC and other substrates;
• remove particles of polyurethane foam that have fallen on the plastic;
• prepare the surface for gluing with other substrates;
• give an antistatic effect, which protects windows from contamination in the future;
• “erase” small scratches and cracks by slightly softening the plastic (not all products in the series are capable of this).

Such washes are used in dry rooms - the compositions do not tolerate high humidity. Funds of this type have many advantages. The quality of window cleaning will be very high with economical consumption and low price (about 270 rubles per liter). It’s very easy to use the products; you don’t have to be a professional to do it.

The main composition of detergents for washing plastic windows

Today there are many glass cleaning products. What should you pay attention to when choosing them and what products should you use to wash plastic windows? Having chosen a liquid, you should not buy it immediately. It is necessary to pay attention to its basic composition. It should not contain harmful chemicals that could damage the surface of the window.

The liquid for cleaning PVC profiles must contain the following components:

• water;
• substances with a surface cleaning function (surfactants);
• silicone - necessary to create a protective layer on the PVC profile;
• antistatic - serves to repel dust and dirt particles;
• alcohol - helps improve the quality of the washing procedure;
• ammonia, methylene - these substances give the glass additional shine and shine;
• dye - necessary to give the liquid a certain shade (if you do not want to purchase a product with a high content of chemicals, it is recommended to pay attention to transparent liquids);
• fragrance - gives a smell.

Range and characteristics of cleaners

The Cosmo CL 300 series produces four main products that are most often found on the building materials market. The compositions differ in the concentration of active substances, which determines the quality of plastic cleaning. The materials have a number of other differences.

Cosmofen 5 (Cosmo CL-300.110)

Strongly dissolving cleaner Cosmofen 5 is the most popular product for removing cracks, scratches, and polishing PVC surfaces. It will help remove traces of friction on the material, not only on polyvinyl chloride, but also on polystyrene, PMMA (polymethyl methacrylate), and impact-resistant ABS plastic.

The areas of application of the product are varied:

• production and home use of plastic windows;
• advertising industry;
• furniture manufacture.

The product is suitable for white materials and has powerful solvent properties. In addition to carboxylic acid esters, the composition contains aliphatic ketones that complement the effect. For home use, it is recommended to buy the cleaner in a 1-liter package; for industry, containers of 10 and 30 liters (metal cans) are available.

Cosmofen 10 (Cosmo CL-300.120)

The product is based exclusively on esters of carboxylic acids and does not contain chlorinated, aromatic hydrocarbons.

Cosmo CL-300.120 is a low-solvent cleaner that is suitable for the special preparation of rigid polyvinyl chloride for gluing. The wash is suitable for removing coarse contaminants and removing markings that are made on the profiles of plastic windows.

The material is used only on white PVC. Not intended for softening surfaces or removing minor defects.

Advantages and technical characteristics:

• density - 0.9 g/cubic. cm;
• operating temperature - minimum +5 degrees;
• ignition temperature - +460 degrees;
• does not damage materials during application;
• resistance to climate influences.

The product is sold in containers of 1 liter, 10, 30, 200 liters.

Cosmofen 20

Cleaner Cosmofen 20 or Cosmo CL-300.140 is a non-solvent cleaner based on aliphatic hydrocarbons. Contains an antistatic agent and is intended for cleaning profiles and other products made of rigid polyvinyl chloride, rigid foam boards, film-coated polyurethane. The product is suitable for cleaning products made from different types of plastics, plexiglass.

Related article: How to calculate the size of curtains for a window

What can remove the material? These are the following types of pollutants:

• sealant;
• resins and bitumen;
• fresh mounting foam;
• pencils and pens;
• rubber;
• pieces of tape, film;
• dirt, dust;
• fat.

Most often, the material is purchased to clean plastic windows and doors with a slight degree of contamination. The scope of application concerns exhibition stands, advertising items, billboards, and industrial polymer processing.

The cleaner does not have a solvent effect; the antistatic agent contained in the composition protects surfaces from re-contamination for a long time. The product will not damage profiles or decorative film coating. Produced in containers of 1 liter, 10, 30, 200 liters.

Cosmofen 60

Cosmofen 60 (Cosmo CL-300.150) is a fast-drying cleaner for painted, anodized surfaces.

Designed to remove:

• fresh traces of glue;
• dust, dirt;
• fat;
• traces of pencils, rubber;
• fresh polyurethane foam;
• sealant;
• resins, bitumen.

Using the product, you can clean surfaces made of painted, anodized aluminum, and polymers. Surfaces are treated with Cosmofen 60 to prepare for bonding, for final cleaning and degreasing. The cleaner can be used to dilute various adhesives.

The product does not dissolve, combines well with paints and varnishes, dries quickly, and does not contain chlorinated hydrocarbons. Available in containers of 1 liter, 10, 30, 200 liters.

Detergent price range

There are many detergents for cleaning and washing plastic windows. All of them are in the middle price category.

The table below shows the price range for basic cleaning products for plastic windows:

How to remove paint from concrete.

2. Concrete. At first glance, it seems that it is easiest to remove paint from a concrete wall. However, this apparent simplicity in practice turns out to be just the bravado of incompetent people. And when it comes to the actual work, yesterday’s “experts” shrug their shoulders, unable to give accurate recommendations for removing paint from concrete.

First you need to determine what kind of paint the concrete walls are painted with. If water-based paint is applied to the surface, you can use a spatula. This tool removes paint from concrete walls without any effort. If there is oil paint on the wall, it can be removed using a special remover. Before using this “chemical”, you need to carefully read the instructions in order to correctly calculate the proportions and find out the features of application. A few minutes after the wash is applied, the paint will begin to swell. As soon as this happens, it is necessary to remove it from the surface of the walls using a spatula.

Cleaning the fittings

What is the best way to wash plastic windows to remove dirt not only from the surface of the window, but also from its smallest parts?

Fittings are not only necessary, but also the most important element of PVC windows. When washing, you should not forget about the accessories. If you don't clean it regularly, it can be completely damaged. This, in turn, will lead to complex breakdowns in the profile structure.

The basic rules for cleaning window fittings are as follows:

1. Clean with a dry cloth to remove dust and dirt.
2. Wipe with a sponge soaked in a solution of glass washing liquid or soapy water.
3. Lubrication with neutral oil.

When to wash windows

For the first time, plastic windows are washed immediately after installation. Moreover, it is advisable to remove the protective film from the surface of the glass unit. She protected the windows during transportation, but that was the end of her mission. Over time, the film may stick to the windows under the influence of the sun and will be more difficult to remove.

In the future, windows are washed twice a year or when dirty. To do this, it is better to choose a warm, cloudy day. Can be washed in sunny weather. But you will need to act very quickly, as water and detergent dry out in the sun, forming streaks and making cleaning difficult. The ideal time for cleaning is spring and autumn, when the sky is overcast but not raining.

Related article: PVC lifting windows

Basic rules for washing windows

To ensure that there are no streaks left on the surface of the double-glazed windows and that the PVC profile is not damaged, you should follow the basic rules of the cleaning procedure. How to properly wash plastic windows?

Main stages of work:

1. Window profile. First of all, we clean it from dust and dirt. You can use a soft cloth for this. After this, the plastic surface of the frame is cleaned with a sponge soaked in detergent. After the profile has been cleaned, it should be wiped with a damp cloth soaked in clean water. This will remove any remaining cleaning product.
2. Double-glazed windows. You should start working from the top of the window. If you use a glass cleaner with a spray nozzle, you can use it to apply the product to the window and then wash it with a sponge. If there is no such attachment, apply the liquid to the sponge and squeeze it out lightly. You should move vertically downwards, trying to avoid gaps. Wash off the liquid with a special window cleaning tool. It removes dirt well along with soap solution and does not leave streaks.
3. Cleaning window fittings.

What to do if you need to clean the panels on the ceiling

Contamination on the plastic ceiling covering can occur for several reasons:

• if the hood in the kitchen is not working well, steam and volatile fats accumulate on the ceiling, forming greasy stains;
• in the event of a water supply failure on the upper floors, water can leak through the ceiling, resulting in rusty stains forming on the ceiling;
• hard tap water, evaporating at high temperatures, contributes to the formation of lime deposits on the ceiling;
• plastic on the ceiling and traces of insect activity contaminate it.

When cleaning plastic on the ceiling, remember that non-laminated products should only be cleaned with dry wipes.

To wash laminated surfaces, you need to prepare the following tools and products:

• mop with telescopic handle;
• cotton rag;
• sponge with small pores;
• container for solution and water;
• cleaning agent.

To wash plastic ceiling panels, it is better to prepare a soap solution (100 grams of crushed laundry soap per 3 liters of warm water). Apply the solution to the plastic with a sponge or soft brush and leave for 5 minutes to soften the dirt.

Dirt is removed with a foam sponge until the solution is completely dry. The cleaned surface is washed with a cloth and clean water, and then dried with dry wipes. Stubborn stains should be removed using special products suitable for the nature of the contamination.

Advice from our grandmothers

If modern detergents rich in chemicals are not to your liking, you can remember the time-tested advice of our grandmothers.

1. To avoid streaks, windows should be wiped with dry newspaper.
2. If you apply a vinegar solution to clean windows, it will repel insects and the glass will stay clean longer.
3. To prevent windows from freezing, you can wipe them with a salt solution (250 ml of water and 2 tablespoons of salt).
4. To wash glass, you can use a solution of laundry soap.
5. To make the window shine, you can wipe it with ammonia soaked in water.

The procedure for caring for plastic windows is quite simple; you just need to follow simple rules. With timely care for windows made of PVC profiles, you can not only achieve their shine, but also significantly increase their service life.

Care methods

You can monitor the cleanliness of the coating in two ways: dry cleaning and wet cleaning.

1. Dry cleaning
   is basic tile care. Cleaning involves using:
2. vacuum cleaner;
3. cotton napkin;
4. brooms or brooms;
5. brushes with soft bristles.

1. vacuum cleaner with washing function;
2. mop with mop;
3. microfiber cloth;
4. soapy water solution;
5. spray or neutral detergents for PVC tiles, used according to the instructions.

Upon completion of wet cleaning, the floor must be wiped dry.

How to remove oil paint from walls - step by step diagram

Step 1: Apply wash

The remover should be applied with a brush or roller, working in one direction, without repeated applications to the same section of the wall. Try not to splash the remover, avoid contact with the skin. If this happens, rinse with warm water.

Step 2: The wash works

You won’t have to wait long - some solvents can do the job in a matter of minutes, as evidenced by characteristic visible reactions.

Step 3: Clean with a spatula

The paint softens and can be easily removed with a spatula or a metal brush. True, the wash does not always cope with all layers at once - in this case the process has to be repeated.

Step 4: Neutralize the remover

If possible (so as not to flood your neighbors), try to wash off the remaining chemicals from the wall - such an aggressive composition should not be left on the surface.

There are also more gentle, and most importantly, less expensive ways to get rid of paint using chemicals. For example, if we are talking about removing such a coating from a plank surface, you can get by with water and soda ash. We wet the surface generously, cover it with a decent layer of soda, cover it with damp burlap or any other rough cloth and wait a day, periodically wetting the cloth. With a spatula, paint swollen from dampness can be cleaned off easily and simply.

How to wash plastic panels in the bathroom?

The bathroom is a room with high humidity, where limescale, mold, rust, and fungal microorganisms often accumulate. Therefore, it requires regular cleaning and ventilation to avoid these troubles. You should also check the plumbing and pipes to replace them if necessary. Rusty pipes are the main cause of fungal formations, mold and yellow discoloration.

It is recommended to wash plastic walls in the bathroom with cleaners in the form of gel, cream, or paste. Cleaning should be done with soft sponges (acrylic, foam rubber) and cotton cloths. Mold can be easily washed off with chlorine-containing liquids. Bleach works great for removing rust. Residue from tobacco smoke, dirty splashes can be washed off with a simple soapy liquid. To prevent complex stains, it is important to regularly care for plastic. You can wipe it with ammonia or soda paste twice a month. After treating plastic materials with detergents, they should be thoroughly wiped dry.