Plastic ceilings are very popular due to their practicality. They are inexpensive, easy to install, and impress the eye with brilliance and cleanliness. But over time, the pristine beauty disappears due to the accumulation of cobwebs, dust, and stains.
All this spoils the picture and is no longer pleasing to the eye. But the ceiling is the face of the room, so it needs to be cleaned regularly. Then the question arises: how to wash a ceiling made of plastic panels, what methods exist to remove contaminants.
To cope with this task, you need to know the reasons for the appearance of unwanted formations and methods of getting rid of them.
About the causes of pollution
The factors that contribute to the appearance of dirt on plastic are varied. Here are some of them:
- dust, soot and soot, which are most often the cause of pollution in the kitchen
- Various fats and oils are the culprits of sticky plaques that form due to evaporation during cooking. Due to their sticky consistency, they become covered with dust and are difficult to clean.
- condensation that forms in the bathroom and kitchen due to hot water vapor. This is caused by the content of alkaline, salt and lime impurities in it, which, after evaporation of the liquid, form an insoluble coating and cause stains.
- cigarette smoke covering the surface of the ceiling with a gray coating
- leaking roof. Due to precipitation and dampness, rusty and dirty stains form on the ceiling surface
- Faucets and pipes due to malfunctions cause rust. It should be taken into account that water can seep through hollow concrete floors, and the stain appears in unexpected places located far from leaking objects
- An equally common reason is repairs, after which traces of wallpaper glue, putty, grout and paint remain
- mosquitoes, midges, flies, moths that penetrate the house and leave dark spots
[custom_ads_shortcode1]
Preventive actions
Elimination of the listed problem situations involves the following actions:
- installation of forced hoods, which prevents the formation of condensation
- Minimizing fat and oil deposits using a range hood
- timely repair of roofs, pipes, taps
- regular wet cleaning of the premises to prevent dust from settling
- mosquito nets on windows to prevent insects from entering
[custom_ads_shortcode2]
Necessary tools and cleaning products for cleaning the ceiling
To wash a plastic ceiling yourself, first of all you need to pick up the simplest tools:
- water container, taking into account the addition of detergents to it
- a soft cloth, several rags (rags are better)
- latex gloves
- foam sponge
- a special mop with a soft, replaceable cloth or microfiber tip
- brush with natural bristles (for cleaning the ceiling in the kitchen)
You may also need a vacuum cleaner to remove dust first. This will prevent the formation of streaks.
[custom_ads_shortcode3]
What is better not to use
Plastic is a delicate material that begins to dissolve under the influence of aggressive substances and becomes rough. In order not to spoil the surface, it is recommended to exclude from the arsenal of detergents and equipment:
- any abrasives - powders, metal brushes, meshes, knives;
- acetone, white spirit and other strong solvents;
- acids and alkalis;
- melamine sponge.
It is enough to use powerful products once or twice a year to remove heavy stains. Polishes and soapy water are suitable for regular maintenance. Do not wash plastic surfaces with hot water. Thoroughly rinse off detergents and ventilate surfaces after cleaning.
About purchased detergents
You can opt for professional household chemicals. Funds in this category are represented quite widely. A highly effective product - L. cleaner.
Amway brand OC.
It is suitable for washing various materials. The product is environmentally friendly. It does not need to be washed off with water.
Mr. liquids for cleaning walls and floors are very popular. Proper and Mr. Muscle.
These are foaming products with a pleasant, quickly dissipating odor. The cleaning process is speeded up by the fact that the use of preparations does not require additional rinsing with water after finishing work.
Cif Cream cleansing cream and Glorix spray have proven themselves well. They clean stubborn stains from grease, rust and limescale well. Important! Before use, be sure to read the instructions containing instructions on the correct use of the substance.
[custom_ads_shortcode1]
What to do with your own hands
If the store is far away or you don’t want to get out into the fresh air, you can clean the plastic with improvised means. They are less effective than industrial chemicals, but can help with minor stains. The ingrained yellowness will have to be washed off for a long time and painfully.
What can help:
- ammonia;
- hydrogen peroxide;
- bleach (removes mold);
- laundry soap;
- nail polish remover (without acetone).
It is better to dilute bleach with water (a tablespoon per liter).
For severe stains, you can use pure peroxide, ammonia and varnish remover. In any case, test the selected substance on an inconspicuous area before cleaning. Dampen a sponge or rag in the liquid and scrub the dirty area thoroughly. Leave on for a few minutes and rinse off.
Homemade cleaning solutions
Products prepared at home are not inferior to factory-made drugs. Here are a few recipes for products that cope well with stains on plastic surfaces:
- A simple soap solution. Regular dish soap is added to the water. You can use grated soap. Fill it with warm water and wait 30 minutes. to soften, then foam the solution.
- Whitening agent. Add 2 tbsp to 5 liters of water. available bleach. This is a good way to wash yellowed plastic panels to give them a fresh look.
- Ammonia perfectly copes with the problem of greasy plaques and plaque on plastic. Dilute 1 tablespoon of alcohol in 1 liter of water.
- Baking soda with water is an excellent solution for all kinds of stains. To do this, prepare a liquid paste from these components and apply it for 2-3 hours. Then wipe with a soft sponge moistened with warm water.
How can plastic be damaged?
When using all kinds of means and tools, you need to know that some of them can damage the surface of the panels. To prevent this from happening, you must remember that:
- You should not use abrasive products to wash the plastic ceiling, because they can scratch it and ruin the gloss
- brushes must be soft, the use of sharp objects is unacceptable
- When using a mop for convenience, you should work carefully so as not to make dents on the plastic panel
- acetone, vinegar, vodka, as well as laundry soap containing a high percentage of alkali can damage the integrity of the material
- When using baking soda, do not scrub the stain with force.
- It is not recommended to use washing powders for preparing cleaning solutions
The main rule in using all means is to be able to anticipate possible damage to the plastic. Therefore, before use, it is advisable to conduct an interaction test in an inconspicuous place.
[custom_ads_shortcode2]
Features of cleaning plastic
Powders with abrasive particles, as well as hard and metal brushes are absolutely not suitable for caring for plastic panels. These products can cause scratches and minor damage to the surface, which will contribute to the accelerated accumulation of dirt and the formation of limescale.
Before you start washing, you need to stock up on the following cleaning items:
- Soft acrylic sponges.
- Foam sponges.
- Rags made of soft fabric.
- Acrylic sponges.
Where to start and how to wash
All advice on this issue is quite conditional and cannot be an accurate guide to action. However, there are requirements that must be met:
- Before starting work, it is necessary to clear the room of unnecessary objects;
- Use a vacuum cleaner to remove dust from the ceiling;
- Then you should rinse the ceiling with clean warm water. After this, you can apply any version of the solution described above and leave it on the surface for some time (3-5 minutes). Gently wash the ceiling with a sponge or rag;
- Before drying, you need to wash it again with water;
- Wipe the ceiling with a soft flannel or rag, changing rags often to avoid streaks.
In living rooms, the plastic ceiling is easy to clean if it is regularly cleaned with a vacuum cleaner.
[custom_ads_shortcode3]
Proper bath care
Cleaning the bathroom takes a lot of time, because plastic panels or tiles very quickly lose their original appearance and beauty. Under the influence of steam and various shower gels, surfaces in the bathroom become overgrown with limescale, streaks form, and sometimes fungus forms. With the help of cleaning products that can always be found at home, or special products from the store, such problems are solved in an instant.
How to clean tiles from limescale?
Typically, limescale is more noticeable on plumbing fixtures. This does not mean at all that it is not present on the PVC panels or tiles. Just like plumbing fixtures, tiles need cleaning. Unfortunately, it will not be possible to deal with lime with ordinary cleaning. To do this, you need to use one of the proven methods.
Method number 1:
- Mix baking soda and water until a paste forms.
- Apply the mixture to the surface and leave for 15 minutes.
- Rinse off after time with cold water.
- To add shine to materials, wipe them with ammonia at the final cleaning stage.
Method number 2:
- Take 50 ml of acetone and mix with starch to obtain a paste.
- Apply to surface and leave for 20 minutes.
- After the specified time, rinse off the composition with clean water.
Important! This method is more suitable for enameled, chrome and nickel plated surfaces.
Method number 3:
You can use orange peels or potato peels to clean limescale.
- Rub the dirty parts with orange peels or potato peels.
- Let stand until completely dry.
- Rinse off with clean water.
How to get a clean kitchen
It is more difficult to wash ceiling panels in the kitchen. Adhering fatty plaques, soot, and stains from fumes cause many problems. Therefore, many are interested in the question of how to wash the plastic ceiling in the kitchen. An indispensable remedy for greasy deposits is a soap solution followed by treatment with an alcohol-based product.
The above-mentioned soda paste recipes and a solution with ammonia work well in removing greasy stains. Yellowed plastic is treated with a product containing bleach or ammonia.
A universal assistant in the kitchen is a melamine sponge . With its help you can remove contaminants of any origin. To do this, just moisten it with water and wipe the surface.
After using detergents, it is necessary to rinse the plastic with water because the chemicals may contain allergens. With regular care of plastic ceiling panels, dirt can be easily removed. But if the dirt is old, you will have to process it 2-3 times.
Cleaning kitchen ceilings differs from cleaning them in residential areas only by requiring more effort and time. Everyone decides on their own how to wash plastic ceilings at home. The main thing is that this process does not cause negative emotions, does not turn into torture, but gives pleasure from the result obtained.
To ensure that the ceiling is always pleasing to the eye, it is necessary to lightly treat its surface from time to time. In this case, you won’t have to spend a lot of effort fighting stubborn, old stains.
Liked? Share on social media networks!
Surface cleaning 01/17/2018 5.3 thousand 3.6 thousand 2 min. Very often, during general cleaning of the house, housewives simply do not know how to wash the plastic panels on the ceiling, in the bathroom, in the kitchen or in the rooms. You should not immediately take on household chemicals, which are too expensive and harmful to health. To clean PVC without streaks, you can use available home remedies such as ammonia, baking soda, table vinegar, vodka, or prepare a homemade cleaning solution. To wash plastic panels, it is not at all necessary to use expensive household chemicals, which are also harmful to health. You can clean PVC in the bathroom or room using a special homemade solution. This product will clean the plastic well and will not leave streaks. To clean the panels you need to:
- 1. Take 2 tbsp. l. dishwashing gel or 100 g of laundry soap, grated.
- 2. Dissolve the product in 1 liter of warm water.
- 3. Next, you need to moisten the sponge in the solution and wipe the surfaces with it.
- 4. Finally, wipe the panels with a wet cloth.
This home remedy dissolves grease and soot especially well, so you can use it to clean the kitchen ceiling of grease without streaks. To clean plastic with soda, you need to:
- 1. Dilute 3 tbsp. l. baking soda with water to form a paste.
- 2. Moisten a kitchen sponge in the paste and clean the PVC.
- 3. The soda should be left for several hours so that it dissolves all the fat.
- 4. Finally, the surface should be washed with a wet cloth.
You should wash plastic panels with baking soda very carefully, as particles of the product can leave small scratches on the surface. The plastic panels in the room can be cleaned with vodka. But the disadvantage of this product is that it cannot wash panels with a pattern. It is enough to dilute vodka in half with water, moisten a rag in the working solution and wipe the PVC. Instead of vodka, you can use alcohol, which can also be used to clean the panels so that no traces remain. Alcohol is diluted with water in a ratio of 1:4. Any dirt from plastic panels can be removed using ordinary table vinegar and plain water. To wash plastic, you need to:
- 1. Dilute 5 tbsp. l. vinegar in 200 ml of water.
- 2. Soak a rag in the solution and wring it out.
- 3. Wipe the surface, paying special attention to the most contaminated areas.
- 4. After cleaning, wash the PVC with a wet cloth.
The downside of this method is that not everyone can tolerate the smell of vinegar. Therefore, after cleaning you need to ventilate the room.
Ammonia, which is inexpensive in pharmacies, copes well with a wide variety of stains on plastic. To wash plastic, you should prepare a working solution of 1 liter of water and 2 tbsp. l. ammonia. Soak a sponge in the solution and wash the surface. After cleaning, be sure to ventilate the room well, as the smell of ammonia is very pungent.
In this article we will talk about how to renew a plastic ceiling that has faded over time and lost its former whiteness, how to wash it, how to protect the plastic from fading, how often you need to wash the ceiling, and how to get rid of soot in the kitchen. If you are still wondering how to make a plastic ceiling with your own hands, then I advise you to read this article https://remstroyvopros.ru, which describes all stages of the work - from assembling the frame to installing the plastic panels.
The ceiling gets dirty most quickly in the kitchen. Evaporation from fat and spices during cooking, soot - all this settles on the ceiling. Therefore, the first thing you need to do before installing a plastic ceiling is to think about the exhaust system above the stove. This will allow you to carry out a thorough cleaning only once a year.
Tips for bleaching ceiling panels But the ceiling can lose its whiteness not only from dirt, but also from exposure to sunlight. You can return the plastic to its former whiteness with a chlorine solution. It is prepared as follows. Mix 2 tablespoons of laundry bleach and 10 liters of water. Using a sponge or soft cloth, thoroughly wash the ceilings with the resulting solution. Chlorine perfectly washes away stubborn dirt and makes the ceiling white.
The most convenient way to clean the ceiling is with a mop. Better yet, buy a mop with a microfiber tip. And it will be more convenient to work, and you’ll clean the ceiling faster.
After treating the ceiling with chlorine solution, let it dry for 5-10 minutes. Then the surface is washed again, but with ordinary, clean water.
If it is heavily soiled, you will have to do general cleaning several times. To do this, wash the ceilings 2-3 times with a chlorine solution and several times with plain water. Glossy surfaces are very sensitive to dirty water, and any streaks will be noticeable after drying. Therefore, after finishing cleaning and the ceiling has completely dried, the surface can be wiped with soft cloths.
You can replace laundry bleach with regular floor cleaner. It also contains active substances that perfectly clean the ceiling of dirt. Dilute it according to the instructions on the package.
To make the ceiling less dirty and fade from daylight, you can apply a special protective composition for plastic to the surface. It is sold in furniture stores in the form of a spray in a can or liquid. This product will save you from repeated general cleaning for a long time and will extend the life of the ceiling made of plastic panels.
The most current information about sato electronic bidet covers is here. Buy generic Viagra tablets.
How to wash a plastic ceiling? After the plastic ceiling is installed, the eye never tires of rejoicing at the wonderful transformation of the room and the radiance emanating from above.
But, despite the apparent inaccessibility of the ceiling to various sources of dirt, over time it becomes noticeable that its appearance is far from the same as it was immediately after installation. Due to the accumulation of dust, shine disappears, various stains spoil the overall picture. The ceiling needs cleaning. Before you wash your plastic ceiling, you need to know the causes of contamination and how to eliminate them.
You need to know this in order to:
- prevent this from happening in the future;
- choose the desired method for removing dirt;
- select suitable material for cleaning;
- purchase cleaning products suitable for the event.
[custom_ads_shortcode1]
What are plastic panels made of?
It seems that everything is clear that plastic panels are made of plastic, but what kind of material is it and what properties does it have? First of all, I would like to note the incredibly long service life of such panels, especially indoors. They are also completely safe for human health, so they can be easily installed in residential premises. The polymers used to make panels pass all tests and have government certificates.
For the most part, panels are available in two types: laminated - have a smooth, shiny surface, and matte - rough to the touch, without shine.
They are not affected by moisture, are extremely resistant to any chemicals and look modern. There is no need to talk about the color scheme: the number of colors is not limited, you can choose to suit every taste.
When choosing panels, decide in advance where and which ones will be installed; what suits the hallway will be absolutely unsuitable for the kitchen. For example, matte panels will be more difficult to clean from greasy stains if they are used to make a kitchen apron. PVC plastic panels in the kitchen must be laminated.
Causes of pollution
None So, the main causes of pollution may be:
- Dust is an eternal inhabitant of any room. Gradually settling on the ceiling, the dust covers it with a thick layer, which hardens over time. This gray layer will do nothing to brighten up the room.
- Leaking roof or wall. Water, entering the concrete through small cracks, moves downwards, along the way absorbing rust, dirt and other components of the surface of the roof and wall. The result is dirty spots appearing along the edges and in the middle of the ceiling.
- Fat deposits. This problem is typical in areas where food is prepared and eaten. As fats and oils evaporate, they reach the ceiling, where they cool and firmly adhere to the surface. In addition to the fact that such fumes create stains, they also collect a lot of dust, creating a surface with gray, unpleasant-looking stains.
- Tobacco smoke. Rising upward, cigarette smoke covers the ceiling with a greasy brown coating evenly distributed over the surface, which has an unpleasant, pungent odor.
- Leaking pipes. Pipes located in walls and ceilings can leak over time. In such places the metal is rusty. Water flowing out of such a pipe leaves red streaks on the plastic.
- Condensation stains. Such phenomena occur in rooms where there are sources of steam - in bathrooms and kitchens. The water contains chlorine and limescale. When the condensate from the steam evaporates, its contents remain on the surface.
- Consequences of repair. During the renovation, the ceiling may have been splashed with paint, glue or cement mortar.
- Insects. Flies can cause a lot of black dots to appear on the ceiling. Over time, they begin to become very noticeable.
[custom_ads_shortcode2]
What to buy in the store
Special products are suitable for cleaning:
- window sills and frames;
- refrigerators;
- vinyl wallpaper;
- garden furniture;
- car doors and panels.
Liquids are applied to the surface, allowed to sit and wiped off with a rag. Remember to rinse off the substances thoroughly so that they do not remain on the surface and transfer to your hands! It is recommended to use gloves.
| Name | Form | Purpose | Description |
| HG Intensive plastic cleaner | Spray | Plastic windows, window sills, vinyl, painted walls | Clears yellowness and grayness. Leaves no traces. |
| ASTROhim "Plastic, Vinyl and Rubber Cleaner" | Spray | Vinyl, yellowed plastic, rubber | Removes static electricity, protects against dirt, removes yellowness |
| Cosmofen 20 | Liquid | Frames, window sills, refrigerator | Removes yellowness. The larger the number in the name, the less aggressive the substance. |
| Mellerud "Cleaning agent for plastic products" | Liquid or spray | Windows, window sills, computer case, TV case, furniture | Degreases, removes soot, nicotine stains, yellowness, dust |
| Autosol Plastic Cleaner | Paste or aerosol | Any transparent and opaque plastic, vinyl | Polishes, removes static electricity, removes ink marks |
| Ravenol Cockpit Spray | Aerosol | Car dashboard, vinyl parts | Cleans, polishes, removes static electricity, protects against further contamination |
| Oase Spezial Reiniger 52969 | Liquid | Plastic, metal, glass | Removes yellowness and limescale deposits |
| Liqui Moly Kunststoff-Tiefen-Pfleger | Spray | Car showroom, plastic furniture, window sill | Repels dirt and dust |
| Sonax Profiline Plastic Cleaner | Spray | Car dashboard, household plastic | Gives a matte finish, polishes the surface, repels dust |
| Lavr “Plastic cleaner-conditioner” | Spray | Car interior, window sills | Removes dirt and unpleasant odors, protects the surface from ultraviolet radiation |
Despite such a variety of products, their composition is approximately the same. Liquids contain:
- artificial wax;
- fluorinated polymers;
- solvents;
- binders.
The components break down dirt, rub out scratches, and cover the plastic surface with a protective film. Some products contain silicone, which has water-repellent properties.
Elimination of causes
None Here's what you need for this:
[custom_ads_shortcode3]
Basic rules for cleaning the ceiling
The ceiling, unlike the floor, gets dirty much more slowly. But when its surface, instead of pleasing the eye, evokes negative feelings, it’s time to wash it. When cleaning the ceiling, you need to follow some rules that will not only achieve a high-quality result, but also prevent damage to the delicate plastic surface.
These are the rules:
[custom_ads_shortcode1]
Household chemicals
Not everyone trusts traditional methods of cleaning panels, and in some cases these means may be powerless. If you have exhausted all the possibilities, or if you simply don’t want to bother with making your own detergents, then it’s time for you to go to a household chemicals store and find a suitable product for your panels.
Carefully read everything that is written, and not only on the front side of the bottle, but also on the back - what is written in small letters. Usually, this is where all the most important information about the product is located. Its composition, how it is used and for what materials. As already written from the very beginning, it is better to avoid powders, because even with careful use, the powder can leave initially invisible scratches that will appear after some time.
For plastic panels, both laminated and matte, the most suitable are gels, liquid-like substances containing chemically active substances that quickly remove any type of contamination. It is best to leave your choice to world-famous brands. In some cases, savings are not needed; if you buy a cheaper product made by someone unknown, you may not only fail to cope with the stains, but also cause harm to the panels.
Sequence of work
Usually everyone is interested in how to clean the ceiling and in what order it should be done. Work on cleaning the ceiling from dirt should be carried out in the following sequence:
If the ceiling has been subjected to severe contamination, which has left deposits on its surface facing the ceiling, then this problem can be solved by dismantling the entire structure. In this case:
- the ceiling is dismantled;
- each panel is individually washed and wiped dry;
- the frame and floor slab are cleaned;
- the ceiling is installed in its place.
By following these simple recommendations, you can keep your ceiling clean and tidy. Also read: Plastic ceilings in the kitchen.
[custom_ads_shortcode1]
Using Melamine Sponge
Melamine is a porous material that has weak but effective abrasive properties. Thanks to this, it captures dirt, including very persistent ones, but does not scratch the coating of plastic panels. Melamine is simply softer than PVC or other materials used for lamination.
When washing with a melamine sponge, it is not necessary to use third-party cleaning agents:
- Cut a small piece of eraser from the melamine sponge. Or you can use it all, but then you need to throw it away;
- Lightly wet and wring out the melamine sponge;
- Move it across the panels using wide, even movements from top to bottom (or left to right, but also moving from top to bottom);
- Wipe dry.
The main advantage of a melamine sponge is that it can remove even such “heavy” stains as pencil drawings or traces of cosmetics.
