How to replace glass in a window: step-by-step instructions, expert advice

Despite the fact that wooden windows are natural and environmentally friendly products, they are very demanding and require special care. In the event of a breakdown, you should immediately call a specialist to troubleshoot the problem. Under no circumstances should you resort to self-diagnosis and repair of a wooden window, as this can greatly aggravate the situation. The repair of a wooden window itself most often occurs due to damage to the glass unit. It is this part of the window that is the most fragile, especially if the windows are located on the lower floors. Replacing the glass unit of a wooden window is a labor-intensive process that must be performed by a knowledgeable specialist.

Cost of glass replacement

Replacing broken glass in aluminum windows

If a double-glazed window in an aluminum window breaks, to remove the damaged glass you need to remove the rubber seal and disassemble the bead. In the case when it is necessary to replace the glass in a sliding sash, the sliding mechanisms are first dismantled, and then the sash is removed from the frame.

The price of replacing glass on an aluminum window depends on the thickness of the glass, the number of air chambers in the glass unit, the area of ​​the glass unit being installed and the complexity of the work (the use of special tools and devices for high-altitude work).

Sources

• https://okna-reforma.ru/zamena-steklopaketa-v-derevjannyh-oknah
• https://remont-okon-servis.ru/uslugi/zamena-steklopaketa.html
• https://OknaDel.ru/rezka-i-zamena-stekla-dlja-derevjannyh-okon-i-dverej
• https://stroy-podskazka.ru/okna/zamena-stekol-v-derevyannyh-oknah/
• https://oknanagoda.com/steklo/osteklenie-steklo/obshhee/sposoby-zameny-stekla.html
• https://remont-okon-servis.ru/remont-derevyannykh-okon/zamena-stekla.html
• https://remontokon-yes.ru/zamena-stekla-v-okne/
• https://oknabm.ru/about/articles/zamenit-steklo-v-plastikovom-okne-cena/
• https://balashiha.d-mastera.ru/zamena-stekla-v-plastikovom-okne/

Stages of work to replace a “wooden double-glazed window”

As mentioned earlier, replacing a double-glazed window in a wooden window is a labor-intensive process that only an experienced and knowledgeable specialist can do. Many people confidently believe that having all the necessary tools, they can independently repair wooden windows, including replacing wooden double-glazed windows. But such a negligent attitude often leads to the opposite result.

• First of all, the wooden glazing beads are dismantled. A special spatula is used for this. If the glass unit is glued into the frame with a special sealant, use a knife.
• After this, the old glass unit is removed and the frame is cleaned of any remaining sealant.
• Next, the frame is checked for defects and fungus. If necessary, repairs and treatment with antiseptic agents are carried out.
• The next step is the installation of a new double-glazed window. This happens using special straightening plates. The geometry of the window sash will depend on them.
• The beads are attached to the frame using sealant, which is applied with a special gun and thin nails, and the joints with the glass unit are sealed with a transparent layer of sealant.

Should I insert glass or replace the entire window?

Plastic windows are a combination of reliability, long service life, and excellent performance properties. However, despite their strength, such products sometimes require repair. Even a new double-glazed window can easily fail.

First of all, in a PVC window you can only change the entire glass unit. The same applies to metal-plastic windows or aluminum windows. This service is in demand if the structure has become cloudy, cracks or scratches have appeared.

Services for replacing wooden double-glazed windows from

If you need urgent repairs of wooden windows or replacement of double-glazed windows in a wooden window, do not skimp on specialists, but contact our company for help. We have been installing, repairing and restoring both wooden and plastic windows for many years. Our experienced specialists with a steady hand will accurately carry out all the necessary work to replace double-glazed windows on wooden windows.

Call us and see the quality of the services offered by our specialists. Order a technician to come to your home to inspect and diagnose your window.

Variety of plastic designs for windows

From all the variety of products on the market, the consumer needs to choose the right one for him. The types of windows in a wooden house may differ depending on the type of construction:

• single;
• paired;
• separate.

Depending on the width of the opening, the type of window design is selected . The larger the window, the greater the heat loss will be observed in the room. This means that you will have to additionally insulate the building and increase heating costs.

The design of the PVC window is selected depending on the width of the opening

In addition, plastic frames may differ in the number of glasses inserted into them. The less quantity used, the colder it will be.

Often the shape of the window depends on the architectural design of the building and the design solution. The shape of double-glazed windows can be: trapezoidal, standard, round, narrow, arched.

To make the right choice among the variety of products presented, you need to seek help from professional consultants.

How to choose double-glazed windows for wooden windows

When choosing a reliable and durable double-glazed window, it is necessary to take into account such criteria as functionality, climate zone of residence and many others. Our company’s specialists will be happy to help you decide on the best option to suit your needs.

The following double-glazed windows are suitable for wooden windows:

• two-chamber - best suited for the Russian climate, they protect well from noise and retain heat well.
• soundproofing - will save you from noise outside the window.
• protective (shockproof, armored) - their strength is several times higher than standard ones, moreover, if damaged, the fragments are safe for humans.
• sunscreens - reflect excess ultraviolet rays, allowing daylight to pass through without loss.
• energy-saving - they save more heat, do not freeze and reflect ultraviolet rays well.

The best way to cut glass

To cut glass, a glass cutter is used - a tool for applying a scratch to the surface of the glass and further breaking along the line. It is important to understand that only regular glass can be cut, not tempered glass.

There are several types of glass cutters.

• Roller glass cutter is the most popular type for non-professionals. The roller in it is made of carbide metal and has a short resource, which is usually indicated in the instructions. This type of glass cutter does not scratch the surface of the glass, but presses a small groove into it. Recently, models have appeared with several turret mounting rollers: after one wears out, you can use the next one.
• Professional diamond glass cutter - equipped with a small technical diamond. Cutting glass with its help is quite difficult for inexperienced craftsmen, since it is necessary to select the optimal cutting angle by trial and error. If you don't do this, there will be a lot of waste. When the glazier selects the optimal angle of the tool, a barely visible line should be obtained, and a subtle ringing sound should be heard when making a scratch.
• An oil glass cutter is another professional type of glass cutting tool. It is distinguished by the presence in the handle of a reservoir for oil, which is supplied during operation. This reduces friction and significantly increases tool life. Fill it with special oil for glass or kerosene.

Restoration of wooden windows

Window painting

Painting wooden windows is preceded by impregnation and priming of the wooden surface of the window. Impregnation is carried out to protect against mold, mildew and humidity changes in the wood, as a result of which the window is less deformed. The paint is applied exclusively to a dry surface.

Restoration of wooden windows is carried out in several stages:

• complete removal of old layers of paint and varnish
• grinding
• restoration of broken or missing wooden elements
• performing priming and putty work
• sealing the joints between double-glazed windows and window frames
• installation of silicone seal
• applying finishing primer
• coating with stain, varnish
• restoration of fittings

Correction of sash geometry

Solves the problem of sash sagging by removing glazing beads and increasing the number of spacers under the glass unit.

Facing works:

Installation of internal and external slopes, ebbs, mosquito nets, ventilation restrictions, blinds, handles with a key (child lock), etc.

Modernization of wooden windows

Involves improving the functionality of the design. You can replace solid double-glazed windows with opening sashes, install additional fittings (burglar-proof, micro-lift, micro-ventilation), armored double-glazed windows, a remote control system and much more.

Redecorating

Cosmetic repairs mean improving the appearance of a structure without functional changes. Small chips and scratches can be filled with putty, and then the frame can be touched up in one layer.

Timely cosmetic repairs will significantly increase the service life of wooden windows.

Replacement of components:

Fittings, broken double-glazed windows, sealing rubber, handles and other things.

Adjusting wooden windows

The adjustment will help solve the problems of the sash catching, the window not closing tightly, or blowing out.

Repair of old wooden windows

Repairing “Soviet” windows is an excellent alternative to buying new ones.

We are engaged in the restoration and repair of old wooden windows: with rotary handles and with latches, the so-called. "Stalinist"

The main problems with old windows are leaky joints, cracks, insufficient sound insulation, wear of fittings and damage to paint.

Major breakdowns

In terms of functionality, modern wooden windows with double-glazed windows are not much different from those made of aluminum or PVC profiles. They are also equipped with fittings from world famous brands such as Roto, Maco, Winkhaus, Siegenia-Aubi or Gretch-Unitas (GU). Also equipped with groove seals. And, of course, double-glazed windows.

It is the totality of the above, multiplied by the characteristics of wood as a material, that determine the main problems that owners of such window systems may encounter:

• ventilation (drafts), transmission of street noise;
• fogging (condensation), ice formation in winter;
• sagging of the valves, jamming when opening, violation of geometry;
• breakdowns and wear of fittings (handles, combs, locks);
• visible wear of the seals;
• the presence of cracks, cracks, loss of aesthetic qualities of the profile (paint and varnish coating has peeled off);
• chips, cracks on the glass unit, complete loss of integrity.

Repair features

All features of repair work with wooden windows stem from the characteristics of wood as a material for frames:

1. It is much more difficult to restore the geometry of the sashes; it takes weeks for PVC or aluminum windows;
2. When removing double-glazed windows, the technician must be extremely careful and careful, because the large weight of the double-glazed window can cause damage to the frame;
3. Replacing sealing rubber bands can also be associated with certain difficulties due to deformation of the grooves during long-term use;
4. When installing fittings and accessories, a specialist must check the strength of the fastening, because technological holes can easily become unusable. Moreover, if excessive force is used, the wooden profile can be split.