The KRAUSS profile systems of the 5800, 7300, 7500 series are manufactured according to the recipe of the Japanese company Mitsubishi on Austrian equipment and are certified to comply with the requirements of the Russian GOST 30973. To date, the Astek-MT company has mastered the production of three types of profiles, having different thermophysical properties, design and systematized according to three series.
- a fairly “standard” design with edges beveled at an angle of 15 degrees, but easy to clean and with a strict classic style;
- interchangeability of both profiles from different series and the reinforcing profile, which facilitates the work of plastic window manufacturers;
- guaranteed environmental safety through the use of a specially developed compound mixture and PVC resins from the Mitsubishi concern and full automation of the production process;
- the possibility of installing not only double-glazed windows with a thickness of 24-40 mm, but also single glasses in profile systems;
- a 13 mm groove allowing the installation of burglary-resistant fittings into windows;
- frost-resistant design;
- stability of the linear dimensions of the finished product thanks to modern extrusion lines of the Austrian manufacturer Technoplast;
- strict quality control at all stages of production by our own laboratory;
- low consumer price due to the presence of warehouses in major cities of Russia and transport logistics.
Along with this, it should be noted that the absence in the line of products with first-class thermal insulation, wide frames and mounting rebates for double-glazed windows of reinforced thermal insulation with a thickness of 44 mm or more limits the use of KRAUSS profiles for the production of plastic window structures used in regions of Russia with high negative temperatures in winter .
Krauss aluminum and plastic profiles enjoy well-deserved popularity in our country. Produced on Austrian equipment from Japanese raw materials, they are distinguished by excellent technical and operational characteristics and an affordable price. According to experts, the Kraus profile is practically in no way inferior to the products of leading foreign manufacturers and is excellent for private, industrial and commercial construction.
Alokna company designs, manufactures and installs aluminum and PVC windows, doors, office partitions, facades and other structures made from Krauss profiles. This product is ideally adapted to the climatic conditions of our country, therefore it tolerates the heat of the southern regions and the severe frosts of the north equally well.
Distinctive features
The excellent quality of KRAUS is confirmed by multiple certificates.
During production, imported equipment is used, as well as raw materials - PVC resin from the famous Japanese.
259 Reviews | 5 current promotions | 9 advantages of the manufacturer
The structural advantages of these profile systems are:
- the arcuate shape of the inner walls prevents condensation from entering the inner chamber
- the walls of the grooves are enlarged in the places where the impost connections are fastened with screws, which gives additional rigidity to the entire structure
Advantages
KRAUSS windows are one of the most popular solutions on the modern market, which confirms the high demand among buyers and their positive reviews.
They have a number of advantages:
- high thermal characteristics
- environmental and fire safety
- perfect look
- modern design
- use of conventional and anti-burglary fittings
- durability
- a variety of design options for building facades, the ability to choose between sliding, hinged and solid structures
- the easiest possible care
- affordable prices
The issue of cost is often a top priority, in which case KRAUSS plastic windows will be a particularly attractive option.
Popular series
- Three-chamber, 58 mm wide - universal designs intended for use in most Russian regions. They are the most popular and economical solution for Moscow.
- Three-chamber, 70 mm wide, are installed in regions with more severe climatic conditions. They also help create comfortable conditions in other regions of the country, including Moscow and the Moscow region.
- Five-chamber, 70 mm wide, are an ideal option for areas with extremely harsh climates. They have excellent heat and sound insulation characteristics.
We offer residents of Moscow and the Moscow region plastic windows with a 45% discount.
Hinged window-door design of KRAUSS profiles, P400 series
Designed for the manufacture of office partitions, windows and doors. Processing of the profile is similar to the sliding series, only the profile is cut at an angle of 45. Further assembly is carried out using embedded corner crackers. The design allows for the installation of glass with a thickness of 3 to 4 mm with a bead P400/30X, from 5 to 6 mm together with a bead P400/31X, it is possible to install glass up to 7 mm and double-glazed windows up to 16 mm thick. This system is lightweight and cool.
Characteristics of P400:
- — installation depth of the profile: 40 mm
- — visible frame dimensions: 56 mm
- — visible dimensions of the sash: 70 mm
True German VEKA quality
Premium German brand on the Russian market since 1995. With VEKA you get true German quality from a company with a 48-year history around the world.
- ALL profile systems of the highest class “A”
- ALL are made frost-resistant and marked with the letter “M”
- ALL have maximum 4-sided steel reinforcement
- Uniform quality standard regardless of country of production
The more air chambers, the less air exchange and, accordingly, the higher the thermal insulation.
The wider the profile and the greater the installation depth, the higher the thermal insulation.
Facade series KRF-50
The KRF-50 facade series has a profile front surface width of 50 mm. The height of the section of the rack is from 47 to 147 mm, the cross-bar from 34 to 153 mm. Filling thickness 24 and 32 mm. Produced using a special hot pressing method, it can be anodized or powder painted in accordance with the RAL scale. Mainly, mullion-transom and transom-transom facade systems are made from this series. This facade series allows you to make stained glass windows with the crossbar rotated to different angles (using 1-2 racks).
Characteristics:
- — installation depth: 47, 77, 107, 124, 147 mm
- — visible part of the profile: 50 mm
- — filling: 4, 6, 22, 24, 30, 32 mm
Profiles ONLY of the highest class “A”
According to GOST 30673-99 “PVC profiles for window and door blocks” in terms of the thickness of the internal walls, ALL of our profiles are the highest class “A” - the thickness of their front wall is at least 3 mm.
GOST standards for different classes:
- class “A”: front wall not less than 3.0 mm
- class “B”: front wall not less than 2.5 mm
- class “C”: wall thickness is not standardized
Please note that 80-90% of the Russian market are classes “B” and “C” and only 10-20% are class “A” profiles. At the same time, VEKA’s assortment includes ONLY class “A” profiles.
We fundamentally DO NOT use profile systems of classes “B” and “C” (with a front wall width of less than 3.0 mm).
Features of KRAUSS aluminum profiles
Profile systems are manufactured from aluminum-magnesium-silicon alloys, both hollow and combined in accordance with GOST 22233-2001 with a finishing coating of anodizing or powder polymer coating in RAL colors; in the combined profile, a thermal break based on glass-filled polyamide inserts is used to block heat flow.
A system of basic KRAUSS profiles, additional elements, ESSE’s own fittings or hardware systems from world-famous brands (Roto, Maco, Giesse, etc. under the “European groove”) can be used to assemble the target structure (windows, doors, stained glass windows, entrance lobby, anti-aircraft lanterns, façade glazing), however de facto:
- in the mandatory certification system, System Aluminum JSC has a certificate of compliance with GOST 22233-2001 only for hollow and solid profiles (C-RU.PB21.V.00600), i.e. the combined profile with a polyamide thermal insulating insert of the KRWD-64, KRWD-71, KRLS-64 series is not certified as a solid product;
- Despite recent statements by the company on social media, certificates of conformity for profiles with test reports to confirm product quality are still unavailable, and the profile for “warm” glazing is offered at the office. ASTEK-MT website without data on thermal characteristics.
Those. so far, all KRAUSS profiles are in fact a thing-in-itself (a thing in itself) and this is their critical difference from the aluminum profile systems Schuco (Shuko), SIAL, ALUTECH (Alutech), ALUMARK (Alumark), VIDNAL (Vidnal), supplied with certificates of conformity and certification test reports for both the profiles themselves and the structures assembled from them.
ONLY frost-resistant profiles
According to GOST 30673-99 “PVC profiles for window and door units” for resistance to climatic influences, ALL of our profiles are “frost-resistant” - for areas with an AVERAGE monthly air temperature in January BELOW minus 20°C.
GOST standards for different classes:
- normal version “N”: the average temperature in January is minus 20°C and above
- frost-resistant version “M”: the average temperature in January is lower than minus 20°C
Our assortment includes ONLY frost-resistant profile systems marked with the letter “M”.
Heat transfer resistance (thermal thermal resistance) is the main thermal insulation coefficient. It is determined by the ratio of the temperature difference between the outside and inside the room to the heat flow passing through the window. The higher this number, the better the insulation performance.
KRAUSS hollow profiles for structures without heat-shielding properties
KRAUSS hollow aluminum profiles are used for assembling modules of balconies, loggia panels, windows, doors, partitions of houses, buildings, structures for seasonal use or used as a second (external) line of fencing premises in combination with energy-saving glazing.
The range is formed by the window and door system KRWD-45, sliding system for windows, doors, balconies, partitions of the C640 series, swing system for windows, doors and office partitions of the P400 series. All hollow profiles are single- or double-chamber and, in fact, on their basis, a combined profile with a thermal break from a polyamide insert is then assembled.
Table. KRAUSS hollow profiles for balconies, loggias, windows, doors, partitions, stained glass.
| Profile system | Peculiarities |
| KRWD-45: single-chamber profile with an installation frame depth of 45 mm and a sash thickness of 53 mm · landing rebate up to 28 mm deep for filling with glass or double-glazed windows · unified groove for hinged and tilt-and-turn fittings EPDM seals | |
| S640: single-chamber profile with an installation depth of a double-track frame of 60 mm and a sash thickness of 22 mm · landing rebate in sashes 5 mm deep for filling with glass · integration of sliding type fittings | |
| P400: · single-chamber profile with installation depth 40 mm · complete set for stained glass windows, NFS racks with pylons · landing rebate 20 mm deep for glass, double-glazed windows or 22 mm sash with a hinged opening type |
Evolutionary double-glazed windows SmartGlass 2.0
Our multifunctional double-glazed windows work for you both in winter and summer. In winter, the spraying of silver particles retains up to 90% of the thermal energy of heating devices, and in the summer, a double-glazed window reflects 25% more solar heat than conventional plastic windows.
- 42% more HEAT in winter (energy saving properties)
- 25% less HEAT in summer (sun protection properties)
All our double-glazed windows contain special energy-efficient glass. We DO NOT use regular glass even in the most basic configurations.
Average prices for krauss profile
| Company | PVC window factory | ||
| Type | Dimensions | Price, rub. | |
| Krauss 5800 | Single leaf | 1480 x 810 | 4 245 |
| Double-leaf | 1400 x 1460 | 5 566 | |
| Krauss 7300 | Single leaf | 1480 x 810 | 4 360 |
| Double-leaf | 1400 x 1460 | 5 716 | |
| Krauss 7500 | Single leaf | 1480 x 810 | 4 509 |
| Double-leaf | 1400 x 1460 | 5 910 | |
| Company | Balcony Factory | ||
| Type | Dimensions | Price, rub. | |
| Krauss 5800 | Single leaf | 1480 x 810 | 4 415 |
| Double-leaf | 1400 x 1460 | 5 600 | |
| Krauss 7300 | Single leaf | 1480 x 810 | 4 510 |
| Double-leaf | 1400 x 1460 | 5 870 | |
| Krauss 7500 | Single leaf | 1480 x 810 | 4 650 |
| Double-leaf | 1400 x 1460 | 6 100 | |
Finding information about Krauss windows and the manufacturer's official website is a difficult task. Product information contains the resource. Technical parameters of profile system models are indicated on the website of an affiliated legal entity in the Republic of Tatarstan.
The resource information contains detailed technical parameters of the product. The site is designed for a target audience of engineers and related professionals. You can get acquainted with the profile models on the official resources of companies involved in the manufacture of structures.
You can purchase window structures from the Krauss profile in Moscow. Companies producing PVC and aluminum systems offer products of various configurations. The price is on the official website of the manufacturers.
Users have access to a calculator for preliminary cost calculations. To do this, you need to enter the dimensions, select the profile type and press the button. The company's clients can use the form, which includes a contact phone number and name. After sending the application, the manager contacts the client to clarify the information and fill out an application for a surveyor to visit.
The price per 1 m² may vary; its formation depends on numerous factors. The cost of products depends on the configuration of the opening, the shape of the profile, the use of additional decorative elements, and the number of opening sashes.
AirDrive I, II and III climate control systems
Optimal ventilation mechanisms are built into the windows - the sashes open slightly by 1-5 mm, depending on the selected mode.
These are NOT external devices (combs or valves), but BUILT-IN ventilation fittings. Three options:
- AirDrive I: slot ventilation (1 mode)
- AirDrive II: discrete multi-stage ventilation (3 modes)
- AirDrive III: discrete multi-stage ventilation (5 modes)
We try not to place combs based on their appearance (only at your request). In principle, we do not use valves due to the fact that they violate the integrity of the window, reduce its tightness and strength (since the profile and its reinforcement are drilled through).
PVC profile
Profile systems for plastic windows are made from environmentally friendly materials that meet international standards. The production technology involves the use of pigment compositions, modifiers, and stabilizers.
Impurities improve the technical characteristics of the material, increase resistance to ultraviolet rays and temperature changes.
Window structures made of polyvinyl chloride have advantages such as durability, light transmission, and functionality. Krauss PVC windows are characterized by:
- high degree of protection of the premises from noise, moisture, dust;
- attractive appearance;
- resistance to aggressive environments;
- thermal insulation properties.
Krauss plastic windows are represented by a range of profile systems. PVC profile 5800 series has a width of 58 mm, 3 chambers, used for glazing of residential buildings located in the southern part. The rebate height of the Krauss 5800 model is 24 mm, the distance of the axis of the fitting groove is 9 mm.
A model of this type is used for arranging loggias and verandas in central Russia. The system is characterized by a heat transfer resistance coefficient of 0.62 m2ºC/W. The maximum glass thickness is 32 mm.
The 7300 series is characterized by a coefficient of 0.73. The profile has a width of 70 mm and is designed for double-glazed windows with a width of 40 mm. The model is adapted to the climatic conditions of the middle zone and is used for glazing houses.
The Kraus profile 7500 series has 5 chambers, is designed for double-glazed windows, 40 mm wide, characterized by a coefficient of 0.75. Krauss systems are positioned on the window market as a budget option. The main advantage of the systems is environmental friendliness.
The emergence and development of the Krauss brand
Krauss production line in Krymsk
But that's not true.
Krauss brand belongs to the Russian company Astek-MT , founded in 2002. In 2006, the company bought four lines for the production of PVC window profiles from the Austrian extrusion equipment manufacturer Technoplast and began producing them under the Krauss brand.
Production is located in the city of Krymsk, Krasnodar Territory. There is even an opinion that the first three letters in the profile designation are an abbreviation for the word Krasnodar. What the other three mean – everyone is free to guess! Maybe Union Soviet Socialist?
Krauss PVC Profile Extrusion
In 2007, thanks to investments from Turkey, Astek-MT managed to increase the number of plastic profile extrusion lines to 9 and launch the production of aluminum profiles for glazing windows, doors, furniture sliding systems and aluminum structures for general construction purposes. In addition, the company sells Turkish fittings for Fornax , including those that provide tilt-and-turn opening.
