Exprof window profiles, what do they think about the exprof profile?

Which profile is better Rehau vs Exprof

Recently, there has been a trend of increasing consumer interest in the question of the advantages of the Rehau Blitz New profile over Exprof Practica and, in general, the topic regarding all profiles of other brands, an expert review from the point of familiarity with profiles since 2001.

Beware of the object profile. Today, all companies producing profiles have cheaper segments; as a rule, professionals call them object segments

Today, all companies producing profiles have cheaper segments; as a rule, professionals call them object segments.

Object profiles do not differ externally from (non-object) and the differences are inside the profile itself: thinner walls of internal partitions or their absence, thinner walls on the outer and inner front walls, it happens that the profile is painted on the front surfaces. In general, object profiles have long been nothing new for processors; in some profile systems they have always existed and are needed by definition on the market, for example, for glazing non-residential premises; hospitals, schools, entrances, etc., this is exactly how the objects of the profile until recently positioned themselves.

It is worth noting that when marking a profile, the brand is given first place, and the profile brand is hidden in a smaller font or the example is made less noticeable; Rehau (brand)| Blitz New (profile) or Exprof | Practica therefore, the buyer should pay attention to the second name when comparing profiles and their affiliation with objects on the official website of the profile manufacturer. Rehau has wonderful profiles and they really deserve attention, but the cost of such windows from Rehau Blitz New will be very different and will most likely not suit the buyer

There is no point in comparing Blitz New with Exprof Practica since these are different classes of profiles, by definition class B (Blitz) and A (Practica) in Rehau they do not hide this at all; there is honestly in the information on the site, but there are no parameters. They should not answer how company sellers present information to the end consumer about the Blitz New profile, but they hide the marking as much as possible, highlighting the Rehau brand. For many companies today it is profitable to sell a low-cost product by passing it off as “premium” because their goal is only sales, otherwise they will not survive

Rehau has wonderful profiles and they really deserve attention, but the cost of such windows from Rehau Blitz New will be very different and will most likely not suit the buyer. There is no point in comparing Blitz New with Exprof Practica since these are different classes of profiles, by definition class B (Blitz) and A (Practica) in Rehau they do not hide this at all; there is honestly in the information on the site, but there are no parameters. They should not answer how company sellers present information to the end consumer about the Blitz New profile, but they hide the marking as much as possible, highlighting the Rehau brand. For many companies today it is profitable to sell a low-cost product by passing it off as “premium”, because their goal is only sales, otherwise they will not survive.

It turns out that the Rehau Blitz New profile can only be compared with Exprof ProWin (not to be confused with Practica) where their class and characteristics are the same, even in this situation Blitz New is inferior to the object ProWin in the price range and the technical characteristics are identical.

Based on the above, when choosing between Rehau Blitz New and Exprof Practica, choose Exprof Practica.

Multi-glass, energy-saving glass, or heated glass will help improve the energy-saving characteristics of any window, but that’s another topic.

The buyer’s interest in the Rehau Blitz New profile is fueled by the brand’s popularity and the buyer’s trust in the inflexibility of Rehau’s high quality, which played into the hands of unscrupulous Rehau sellers and marketers.

Example of object profiles

• REHAU BLITZ New
• REHAU EURO-Design
• KBE Engine
• KBE Knipping
• EXPROF ProWIN

Example of class A profiles

• REHAU THERMO-Design
• KBE_Etalon
• EXPROF Practice
• NOVOLINE

When copying material, a link to the source is required.

Differences between Exprof windows

Abroad, low-grade plastic windows are installed only in sheds; in our country, people try to save money on everything and often regret it. A high-quality product is characterized by frost resistance, high environmental friendliness, durability and whiteness, which remains for many years.

High-quality technical solutions have become a guarantee of the absence of condensation and mold in the apartment after installing plastic windows. Moreover, such structures have a high degree of resistance to external break-ins.

This is interesting: How to install plastic windows correctly: a detailed guide

Choosing a window company

See full rating »

Exprof profile systems

The EXPROF Practica three-chamber profile system is designed for installing a two-chamber double-glazed window with a thickness of 36 mm. Exprof windows produced from this system are installed in homes, medical institutions and schools. It is possible to place a double-glazed window with low-emissivity glass, which increases the thermal insulation properties of the product. The profile is multifunctional; it can also be used to install curtain facades using the strip method, as well as entrance and interior doors.

The Exprof AeroTherma system has an installation depth of 101 mm. Its ventilation system, located inside the profile, helps improve air exchange and avoid freezing of slopes. Plastic windows of this system are equipped with a double-chamber double-glazed window with a thickness of 36 mm. The system includes frost-resistant and multifunctional profiles.

The five-chamber EXPROF Profecta Plus and Profecta systems have an installation depth of 70 mm; they can accommodate double-chamber double-glazed windows up to 44 mm thick, which have increased sound and heat insulating properties. The system is low profile, which allows more light to enter the room. In the production of window structures, 58 mm profiles can additionally be used.

The EXPROF AeroProfecta system has five chambers, its installation depth is 70 mm. The 101 mm wide box is equipped with an access system to the inside of the air profile, which is not connected to the rebate. It removes excess moisture quite effectively. The maximum thickness of the system's glass unit is 42 mm.

New in the company’s line is the Exprof Experta system. It has a six-chamber profile with a width of 70 mm, which has high heat-insulating properties. It can be equipped with energy-saving double-glazed windows up to 44 mm thick. There are no restrictions on operating conditions for the system; it has a burglar-resistant groove that increases the burglary safety of structures. Compatible with other 70mm profiles of the brand. The Exprof AeroExperta system, compared to the company’s previous developments, has a wide frame of 101 mm, which allows the creation of more light-transmitting Exprof windows.

The Exprof Suprema system has an installation width of 70 mm and a five-chamber profile. The front wall with a thickness of 3 mm ensures frost resistance of the structure. Wide range of supported glass units - from 24 mm to 46 mm thickness. The system has a greater height of the sash, frame and glazing beads, which allows the glass unit to be deepened by 25 mm (16 mm for other models). The Exprof AeroSuprema version features a 118 mm box. Both systems are compatible with the brand's 58mm profiles.

The two-chamber Exprof Externa system has an installation depth of 46 mm and is suitable for the implementation of structures of any complexity. Single glass or double glazing up to 24 mm can be installed. The system is designed for glazing balconies and loggias.

Exprof Robusta is designed for the installation of curtain facades. Suitable for glazing greenhouses, winter gardens and continuous glazing of multi-storey buildings. It is easy and quick to install and has no restrictions on the dimensions of the structure.

Window profiles from

The best option for budget glazing!

If you need modern, inexpensive windows, EXPROF is what you need.

• EXPROF Prowin - 3 air chambers, 58 mm
• EXPROF Profecta - 5 air chambers, 70 mm
• Swivel, tilt and turn fittings MASO
• White top/bottom drain
• mosquito net

Recommended for glazing
Technical characteristics

Production of EXPROF profiles

ProWIN and Profecta profiles are produced at the Tyumen plant EXPROF - one of the first and largest manufacturers of system PVC profiles for windows, doors and other translucent structures in Russia.

About the company Exprof

Distinctive features of EXPROF profiles

While prices are rising everywhere, we are making plastic windows more affordable!

spk55.ru

Why should you choose ExProf windows?

Design. One of the advantages of plastic windows is their tightness. But tightly closed doors are an insurmountable obstacle not only to wind, noise and cold, but also to fresh air necessary for breathing. As a result, people complain about stuffiness, and window units “react” by fogging up the glass and dampening the slopes. Engineers have found a way to prevent these problems. EXPROF AeroTherma, AeroProfecta, AeroExperta and AeroSuprema frame profiles have a special ventilation chamber.

In the finished window, it forms a thermally insulated air duct along the entire perimeter of the frame. A system of holes connects it at the bottom of the frame with the street, at the top with the room, forming a labyrinth at the exit. Thus, access to fresh air from the street is carried out entirely through a system of channels inside the frame, bypassing the vestibule.

Climate. The Russian climate is more severe; the difference between the temperature outside and indoors ranges from -50°C to +20°C. The profile can react painfully to such changes, and this leads to a significant and asymmetrical change in the size of the entire window unit. As a result, the adjustment of window fittings gets lost, depressurization occurs, and in some cases it becomes simply impossible to open the window.

EXPROF window units do not face such problems. To create a frost-resistant EXPROF PVC profile, German technologists developed a special recipe that takes into account our climatic conditions. Frost resistance of EXPROF is tested not even at -20°C, as is considered sufficient according to GOST, but at -30°C. EXPROF profiles are officially certified as frost-resistant, therefore the letter “M” is included in the markings applied to the surface of the profiles according to GOST.

Technologies. The initial PVC composition is prepared at the ExProf plant from high-quality components supplied by world leaders in chemical and polymer technologies.

For many years, we have been using the know-how of the American company DuPont in the formulation - a special grade of titanium dioxide in the form of a powder of microparticles coated with a silicon oxide shell. It is this technology that makes the main contribution to the exceptional whiteness, gloss and durability of EXPROF profiles.

Views: 9,336

Prowin profile for windows and doors

If you need a Prowin profile for windows and doors, then welcome to the website, Moscow.

Plastic windows from Exprof Prowin window profile

Prowin is a classic three-chamber system of PVC window profiles with an installation depth of 58 mm. The ExProf company is one of the first and largest manufacturers of system PVC profiles for windows, doors and other translucent structures in Russia. She is a co-founder and member of the Union of Russian Polymer Profile Manufacturers.

PVC profile Exprof Prowin

Prowin is a classic three-chamber system of PVC window profiles with an installation depth of 58 mm. Its production is established at one of the largest Russian extrusion enterprises, LLC ExProf, which has ten years of experience in the production of system PVC window and door profiles. The profile is applicable for civil and industrial construction. Including for children's, medical and health institutions.

The Prowin PVC profile is fully compatible with the connecting and additional profiles of the Exprof PRACTICA system. The unique formulation of the plastic allows it to be used in the temperature range from -55°С to +75°С and to produce structures with a reduced heat transfer resistance of up to 71 m2·˚С/W using it.

The Prowin system is designed to meet the expectations and needs of customers who know how to count money and value quality. More affordable than most three-chamber analogues, this system is designed for operation in the harsh Russian climate, including Siberia. Prowin system designs can be equipped with 36, 32, 24 mm double-glazed windows, providing a wide range of heat and noise protection characteristics.

The system can also be used for glazing balconies, loggias, industrial and domestic unheated premises filled with single glass 4-6 mm, or double-glazed windows similar to window structures.

An additional convenience for the processor is the compatibility of Prowin profiles with all connecting and additional profiles of almost any domestic and foreign systems of the 58 mm system series. This compatibility makes the Prowin system universal and gives the processor a wide choice of suppliers of additional components. The Prowin fitting groove has a formula of 12-20/9, allowing the use of fittings from any manufacturer.

www.bvk-okna.ru

How to choose?

Finding a profile is a responsible task, so it must be taken seriously, because the choice is made for many years

There are a number of factors that are important to consider when purchasing window products.

Profile uniformity is one of the most important characteristics

Pay attention to whether the plastic is uniform and whether there are any defects on the surface; it should be smooth. Exprof windows have proven themselves to be manufactured in compliance with standards and strict requirements.

The coating should be without gradient, uniform and streak-free.

Of course, it is important to ensure that you purchase a branded profile with a certificate. Typically, such products have markings on the inside of the box.

Pay attention to the presence of the manufacturer's name, as well as numbers indicating the shift number, the device for making the profile and the production date

The next parameter when choosing is the width of the structure. The classic option is 58 mm, but Exprof even offers 70 mm profiles, which are more suitable for high-rise buildings or regions with harsh climates. The thickness of the product varies between 2.5 and 3 cm. The width of the profile and the number of chambers directly depend on each other.

The first step when looking for a high-quality profile is to decide in what conditions the window structure will be installed in the room.

It is also important to take into account the climatic characteristics of the region, and even the number of storeys of the building. All this influences the choice of the thickness and width of the profile, as well as the sealing of the frame, so as not to encounter condensation precipitation, because this can not only spoil the insulation, but also develop mold

However, if you choose Exprof products, you only need to decide on the choice of profile series, and you don’t have to worry about quality, because it has already been proven in practice. You can compare different systems to choose the one that meets your personal wishes and requirements.

PVC window profiles XS358 Prowin

Every owner of a house or apartment wants to furnish their home as best as possible. Window openings play a huge role in this case. In the old days, it was through them that the greatest amount of heat escaped. Today this problem has been practically resolved. The OCONTO company, which began its activities on the Russian market in 2009, has managed to create a powerful manufacturing industry. Now almost every resident of the country can order REHAU branded plastic windows.

What is the advantage of the exprof prowin profile?

The main task of manufacturers of window structures is to provide the premises with:

• soundproofing;
• heat saving;
• aesthetics.

Each of these factors plays a huge role in residential buildings. The owners of the house want to protect themselves from street noise and other loud sounds. Special technology and durable materials make this easy to do. The expert group took care of the reliability of the system. First of all, we are talking about the climatic conditions in which the window will be located. It is constantly affected by:

• ultraviolet radiation;
• freezing;
• precipitation.

In this case, the wooden product must be systematically painted and insulated. When using a plastic profile, no maintenance is required. It is enough for the housewife to thoroughly wash the glass unit several times a year. Sometimes you will have to lubricate fittings that are made of metal materials.

If you give preference to a cheap sample, it will definitely fail soon. After a year or two, the product will begin to deform. After all, the Russian climate does not spare low-quality products. Branded models are designed for any frost and heat. The composition of plastic substances plays an important role. If previously lead was used to make the structure, now preference is given to less aggressive chemical elements. They are not capable of polluting the atmosphere, causing respiratory diseases.

How to choose exprof prowin?

This type of plastic windows is a three-chamber system with an installation depth of 58 mm. As practice shows, the products are quite functional and unreliable. Their affordable price especially attracts the attention of buyers. Before you decide to purchase, you must contact the services of a company employee. Electronic catalogs contain models of various configurations:

• rectangular;
• square;
• trapezoidal;
• oval.

Such diversity allows you to turn any design ideas into reality. Thus, the products are used for glazing loggias and balconies. Each client of the company has the right to familiarize itself with certificates that confirm the originality and quality of the samples. The client can also come to the company’s base and directly inspect all the details of the window frames. The website contains sections and schematic images of the model range of systems.

It is noteworthy that all the details are absolutely unified. Therefore, when replacing them, there is no need to look for special service centers. It is best to contact the specialists who installed the windows. Sometimes minor breakdowns occur. They do not require a complete replacement of the profile. It is enough to reinstall some elements.

Before purchasing a product, you should pay attention to the fittings. It must be made of stainless material. Strength also plays an important role. The technical characteristics of each model are presented on the electronic page of the online market.

oconto.ru

Placing an order

You can profitably buy PVC windows from the manufacturer. To do this, after selecting a profile, glass unit, method of opening the sashes, accessories and additional services, you need to go to the cart.

The site will provide contacts for window companies that can produce windows according to specified parameters in your city. Select one or more offices and click on the “request price” button. You will only have to leave your contact information once, in the form on our website. After that, all you have to do is wait for an answer and choose the most advantageous offer.

This is a really fast and convenient way to order windows, doors or other translucent structures at an optimal price-quality ratio.

Manufacturer information

PVC plastic windows have become increasingly popular lately. They are made by many companies today. Among them, we should highlight “Exprof”, which today is one of the largest in the domestic market. The company arose back in 2001 in Western Siberia and worked on the basis of the Plastkonstruktsiya window company. Within two years, Exprof opened its own dealer warehouses in the largest cities of Russia, namely:

• Irkutsk;
• Novosibirsk;
• Omsk;
• Moscow.

Currently, this is a large production and warehouse complex that produces approximately 45,000 tons of profiles per year. You can find dealer and regional departments in 40 major cities of Russia, Kazakhstan and Belarus. When choosing PVC plastic windows, consumers constantly ask themselves which products to choose.

That is why it focuses on the use of high technology and quality. The profile is manufactured using modern German and Austrian equipment

Materials are purchased from well-known manufacturers in France, Austria, Germany and the USA.

Product quality is controlled by the factory laboratory. The cost is noticeably lower compared to imported analogues, while the “Exprof” profile, which has only the most positive reviews, is of high quality from leading foreign manufacturers.

EXPROF

The ExProf company is one of the first and largest manufacturers of system PVC profiles for windows, doors and other translucent structures in Russia.

Production arose on the basis of the largest window company in Western Siberia, Plastkonstruktsia. The starting point was the idea of ​​extruding profiles for our own needs and gradually abandoning the purchase of PVC profiles from external suppliers. In March 2001, the ExProf Company was created, and already in June the first Cincinnati-Greiner extrusion line, which at that time was the only one in (Western) Siberia, went into operation. The name EXPROF, which later became a trademark, comes from “Extrusionsprofil” - “Extrusion profile”. The growing interest of window manufacturers and the accumulating experience of extrusion gradually reoriented the strategic priorities of production from their own needs to the wide window market. The ExProf Company took a truly serious start at the beginning of 2003 with the opening of the first dealer warehouses in Moscow, Novosibirsk, Omsk, Ufa, and then Irkutsk. By this time, EXPROF profiles already constituted a technically mature, completely closed system, tested in two Siberian winters. The subsequent rapid increase in demand and expansion of production brought the company to the top five leaders of the Russian PVC profile market by 2007.

In 2011, the ExProf Company celebrated its 10th anniversary. Today, the ExProf plant is a large-scale production and warehouse complex, which includes four factory buildings, a warehouse for raw materials and additives, silos for storing and supplying PVC resin for production, a site for storing and loading profiles and components, a railway line with an unloading ramp and the surrounding area for new construction with a total area of ​​5 hectares. 28 extrusion lines produce about 45 thousand tons of profiles per year. These volumes are sold through regional and dealer warehouses in the 40 largest cities of Russia, Kazakhstan and Belarus. Every twelfth plastic window in Russia today is made from EXPROF brand profiles.

Profile Exprof Profecta

Windows assembled from Exprof Profeta profiles have a basic level of security and are equipped with 2 sealing contours. The Profecta system has an increased installation depth of 70 mm. The internal space of profiles with an outer wall thickness of 2.2-2.6 mm (class “B”) is divided by solid partitions into 5 separate chambers, which increases their level of energy efficiency. The series is presented in two versions: Profecta and ProfectaPlus. The second option is distinguished by a shift in the fitting groove from the base 9 mm to 13 mm and reinforced reinforcement of the imposts, which makes it possible to manufacture burglar-resistant windows.

Profile Exprof Externa (Externa) – PVC balcony profiles

A two-chamber system with a maximum glass unit thickness of 22 mm and an installation depth of 46 mm is suitable for the production of windows with single-chamber glass units, therefore the Externa S246 system is used, as a rule, for unheated premises where high heat saving and sound insulation are not required: balconies and loggias, cottages and utility rooms buildings, verandas and summer houses. Structures made from this profile are classified as economy class products. Despite the cost, the manufacturer guarantees durability - 60 years.

Review Reviews

The Russian profile manufacturer Exprof appeared on the market about twenty years ago, and during this time it managed to attract great attention. Of course, many consumers have a question about whether the designs of this company are really as good as they say, because they want to invest in reliability and forget about replacing windows for many years

Well, the best proof of high product ratings will be reviews from customers who have already assessed the quality and main characteristics of the products.

To sum up our comments, which are presented in large numbers on the Internet, we can say with confidence that most consumers note the high quality of the profiles, the presence of a self-ventilation system, the absence of heat loss, as well as protection from outside noise, dust and frost.

At the same time, the windows do not fog up, which is one of the important advantages. This is due to the fact that the manufacturer pours a desiccant into the frame. One of the positive qualities users note is the width of the profiles, which are perfect even for Stalinist buildings. Thus, you can safely choose products from a domestic manufacturer, which attracts not only ordinary consumers, but also professionals in this field.

Reviews about the Exprof profile

Reviews from professionals and buyers best characterize the Exprof profile, so we recommend considering different points of view. It should be taken into account that the performance characteristics of windows are influenced by the brand of fittings, the correct determination of pressure points, the type of double-glazed windows and the quality of installation.

Valery Petrovich Nikitenko (window installer):
“I noticed an increase in the number of orders for Aero windows. We, as specialists, also like to work with such models. Thanks to the powerful frame, the structures have increased rigidity. In addition, windows with such an installation depth do not freeze, and after installation, clients do not bother us with complaints about the appearance of ice and condensation.” Anna Petrovna Yurovskaya (consulting manager): “I like working with Exprof products. The presence of several systems with different installation depths and number of cameras allows you to flexibly respond to customer requests. I can always choose what the buyer needs and reach an acceptable price-quality ratio. The presence of the Aero series significantly expands the possibilities. Buyers like its versatility, so they willingly order such windows.” Sergey Viktorovich Peregudov (engineer): “I chose the six-chamber Experta system for my home. This Exprof profile, the reviews of which convinced me to choose it, really justified its membership in the premium category. The rooms are always warm and quiet. In order not to open the doors during the cold season, I chose wide Aero frames. Thanks to them, the windows not only draw in fresh air on their own, but also do not freeze in the most severe frosts.”

When choosing the type of profile for assembling windows, it is advisable to familiarize yourself in general terms with the main characteristics of fittings from different brands. After all, both the functionality and the tightness of structures depend on it.

The use of foreign modern equipment and imported additives has allowed domestic manufacturers to establish mass production of high-quality profiles with different thermal characteristics. Moreover, these systems can compete with imported analogues. After all, the plastic from which they are made has no fundamental differences from the polyvinyl chloride used for casting profiles of European brands.

Image source – Exprof official website

Our online PVC window calculator

One of the best ways to understand what types of plastic windows there are, their sizes and prices is the calculator on our company’s website. When using our calculator, you do not have to look through numerous options from company catalogs, which usually indicate the cost of a standard design with a minimum configuration, and contact each seller personally.

Our online tool, first of all, helps you choose the best profile and glass options for the design you want to order. It is enough to indicate your locality, type of house, floor, assess the level of street noise and the quality of heating in the room. By analyzing each parameter you enter, the system will quickly select the optimal solution:

• profile type - the number of chambers and installation depth that will ensure sufficient thermal insulation of the opaque part of the window in your climate, the presence of a ventilation system for additional comfort and a healthy microclimate;
• double-glazed window - the number of chambers, energy-saving or conventional version for the necessary heat and noise protection of the entire structure.

The choice of the color of the plastic structure, size, number and methods of opening the doors, additional elements and the set of necessary services is yours.

It will not be possible to calculate the cost of a PVC window by size online right away on the website. After all, exprof windows are produced by thousands of window companies in hundreds of cities in four countries, and each has its own cost formation methodology. However, the calculator will provide you with the opportunity to send a completed application to the nearest partner offices to find out and compare real prices for a specific design configuration.

After receiving a cost estimate from the companies, all you have to do is choose the best offer and order PVC windows. The calculator will provide you with a list of only reliable and verified ExProf partner companies in your region.

Exprof ProWIN

PROWIN is a classic three-chamber system of PVC window profiles with an installation depth of 58 mm. Its production is established at one of the largest Russian extrusion enterprises, ExProf LLC, which has ten years of experience in the production of system PVC window and door profiles.

The profile is applicable for civil and industrial construction. Including for children's, medical and health institutions.

PVC profile PROWIN is fully compatible with connecting and additional profiles of the EXPROF PRACTICA system. The unique formulation of the plastic allows it to be used in the temperature range from -55°С to +75°С and to produce structures with a reduced heat transfer resistance of up to 71 m2·˚С/W using it.

The PROWIN system was developed taking into account the expectations and needs of customers who know how to count money and value quality. More affordable than most three-chamber analogues, this system is designed for operation in the harsh Russian climate, including Siberia. PROWIN system designs can be equipped with 36, 32, 24 mm double-glazed windows, providing a wide range of heat and noise protection characteristics.

The system can also be used for glazing balconies, loggias, industrial and domestic unheated premises filled with single glass 4-6 mm, or double-glazed windows similar to window structures.

Calculate the cost of windows.

oknagoda.com

Profile 60 mm – a new direction in the ExProf assortment

For the first time in the exprof assortment, profiles of the 60 mm standard size range appeared. This is a 4-chamber window system XS460 Prona (Prona) and a 3-chamber entrance door system S360 Ratio (Ratio) with a full set of auxiliary profiles.

The 5-chamber Siberica window system with a width of 70 mm as part of the new products has unique elements of unification both with the old energy-saving exprof systems of the same standard size range and with the line of 60 mm profiles. It is united with Prona and Ratio by the same reinforcement and seals, and with Profecta Plus and Experta it is fully compatible with the range of additional profiles. All new systems have a 13 mm anti-theft fitting groove and use a common line of glazing beads with other exprof systems.

The inclusion of non-standard new products in the company's production program is due to changes occurring in the window market. The demand for SPK systems in a moderate price category is growing, but at the same time, profile processors and consumers of final products demand decent quality. Prona, Ratio and Siberica satisfy both trends of the changing market at the same time. Decent quality is ensured by the time-tested recipe of the Tyumen manufacturer and the design features of the profiles.

Profile catalog

Exprof is a manufacturer of high quality PVC system profiles. We produce various types of window profiles, balcony, door and facade profiles of the highest class I (universal) for climate resistance, classes A and B for the thickness of the front walls in accordance with GOST 30673-2013.

The catalog shows a PVC profile in a section in the photo, specify the available sizes, technical characteristics and configuration of each profile system. More detailed information about each profile system can be found in the processor folder.

Exprof produces the following types of profiles for plastic windows, door and facade structures:

Externa

— 46 mm, 2 chambers, lightweight system, used for cold glazing of unheated rooms, including balconies and loggias;

Prowin

— 58 mm, 3 chambers, economical option with reduced thickness of front walls for windows and balconies;

Prona

— 4-chamber economy class system 60 mm wide and with improved thermal insulation;

ratio

— 3-chamber class A profiles for PVC doors with improved heat-saving characteristics;

Siberica

— energy-saving PVC system 70 mm;

Practice

— class A profiles for windows and doors of the standard segment with a width of 58 mm and 3 chambers, as well as a “breathing” version of AeroTherma with a frame of 101 mm, providing exclusive parameters for heat saving and comfort;

Profecta

— five-chamber system for energy-saving windows with a width of 70 mm (standard) or 101 mm (breathable version AeroProfecta);

Experta

— a six-chamber class A system of energy-saving translucent structures in the comfort segment, also includes a breathable AeroExperta version with a 101 mm box;

Supreme

— premium class series with a frame size of 70 mm for the standard system and 118 mm for the design with AeroSuprema intra-profile ventilation;

Robusta

— a set of static connectors and brackets for mounting continuous panoramic glazing from three-, four-, five- and six-chamber profiles of any exprof systems with a width of 58 to 70 mm in a wide range of energy-saving characteristics.

Choosing a PVC profile online

The choice of one or another profile system for the manufacture and ordering of translucent structures depends primarily on the climatic operating conditions. The required noise insulation and the customer’s preferences regarding the ratio of the most important characteristics for him, such as energy saving, reliability, durability on the one hand and price on the other, are also taken into account.

For customers who find it difficult to choose which window profile to choose, we suggest using the plastic window configurator and design calculator for a balcony or loggia. The system will suggest a suitable option that corresponds to the region of residence, the quality of heating in the room, the requirements for heat and sound insulation, and will also generate and send a request for a price calculation to our closest partners. This will help you decide on the equipment, choose a contractor and make the final decision on ordering structures.

Characteristics of the “Exprof Suprema” profile

The city of Tyumen offers for sale “Exprof” brand profiles, which may require a five-chamber system. The installation depth is 70 mm, but the front walls will be 3 mm thick. Thanks to its unique properties, this profile can be used in residential buildings that were built in the northern regions, because the material perfectly withstands harsh winters. The profile is universal, because together with it you can install double-glazed windows of different thicknesses; this parameter varies from 24 to 42 mm. Among other things, the design has certain features that are characteristic of the outer flange of the frame, sash and impost, because the double-glazed window can be deepened by only 16 mm instead of 25.

What to choose: kbe expert or kbe standard or rehau delight?

Each of these manufacturers has its own characteristics that distinguish the models from others. Rehau began installing windows 60 years ago. Experts have developed glass fiber reinforcement. It does not allow the presence of metal inserts in the structure, and this does not impair its strength.

Rehau delight windows, unlike KBE, have a narrowed sash and let in more light.

In the manufacture of products, KBE uses Greenline technology, which ensures an environmentally friendly design.

The eyelid is distinguished by the presence of a horizontal rebate, which reduces the load of the glass unit on the wall, which increases the service life of the structure. The bead is located above the sash, this ensures a minimum accumulation of dust in this part of the structure.

All of these products have proven themselves in use; they have only minor differences. If you choose one of these designs, you will receive a product of high quality and good strength. Their main difference is the number of chambers, thermal conductivity, width and thickness of the outer walls. When choosing, you must take these parameters into account.

Exprof profile systems

A distinctive feature of these systems is that the Exprof profile was developed on the basis of the best foreign technologies, but taking into account Russian climatic conditions. Experienced specialists from Belgium, South Korea and Austria took part in its creation. All profile production lines are controlled by a Siemens automated control system. Product samples were tested for frost resistance not at -20 °C, as required by GOST, but at -30 °C. In the manufacture of systems of all brands, stabilizers are used, which give them a snow-white color, resistance to ultraviolet radiation and low temperatures, as well as a high degree of immunity to atmospheric conditions. Exprof windows can be assembled not only from white, but also from tinted or laminated profiles. Various removals of the fitting groove for mounting sash closing mechanisms allow you to select a system that is optimally suited for the manufacture of structures with the required safety class. Currently, the manufacturer offers customers several types of profiles. Regardless of the modification, all Exprof PVC profiles are offered to the buyer in two versions:

• without sealing contours for EPDM integration;
• with TPE contours stretched in plastic.

Plastic components for assembling all types of Exprof windows can be white or painted in the paste. There is also the possibility of single- and double-sided lamination. Any system from the Exprof range is compatible with auxiliary elements - connecting and expansion profiles. Thanks to this, it is possible to manufacture various structures of complex shapes for glazing balconies, entrance lobbies, bay windows, as well as verandas and terraces. Double-glazed windows and sandwich panels in door and window blocks made from Exprof profiles are equipped with self-made clamping beads, which have a post-coextruded seal made of soft polyvinyl chloride.

Special mood

PlasWin profile systems have appeared on the Russian market relatively recently, but have already gained popularity. Their distinctive feature from other profiles is their incredible whiteness. The profile is literally super white! This is achieved through a special coating of materials, a calcium-zinc stabilizer and a special protective film. In addition, this profile system boasts great strength due to thickened front walls (up to 2.5 mm).

The harmlessness of the PlasWin profile for humans and the environment is achieved due to the “CaZn” technology used, which allows, during the production of plastic windows, to exclude harmful chemical elements from the plastic that can negatively affect health. All PlasWin windows are equipped with a special mark - an image of a tree - indicating a high class of environmental safety.

"PlasWin" is one of the most modern and technologically advanced profiles on the Russian market. Super white profile!

Characteristics:

• profile width 58mm • glass unit width – 32mm • 3 air chambers • sash height 77mm with a reinforcing profile 1.2mm thick making it rigid and reliable • front wall thickness – 2.5mm • frost resistance up to -60o C.

The difference is 2-3 glasses 500 rub.

xn--80ajncpedcodgm0c.xn--p1ai

Prices for service of Plaswin windows (Plasvin) in St. Petersburg (St. Petersburg) and other types of work

The cost of repairing Plaswin windows starts from 1000 rubles.

Make your own calculation of the cost of repair and maintenance of plastic windows and doors

A technician’s visit and diagnostics cost 500 rubles. Out-of-town visit of the master: +30 rubles / kilometer from the Ring Road.

For orders over 5,000 rubles, free departure.

When ordering over 10,000 rubles, there is a 10% discount.

When ordering over 15,000 rubles, there is a 15% discount.

A little something for the negative

Exprof windows decorate a hospital in Voronezh

And yet the Russian consumer finds something to reproach the Russian manufacturer for.

So, “ExProf” windows in reality can only be white. Those who want to have Exprof windows “oak-like” or “gun-steel” and similar exotics will be disappointed. The colored film used to “paint” ExProf profiles does not stick well to a wide surface with a complex configuration.

An ordinary Russian, as a rule, tolerates such inconveniences normally and lives happily with monotonous white frames, but, obviously, among us there are more and more unusual ones.

Glazing of a residential building with Exprof profiles

For the same reason - the complex shape of a wide profile - the mosquito net is poorly attached to the window. It has to be secured with special springs, but there are still gaps through which individual representatives of the mosquito hordes enter the apartment.

This is a more serious flaw. Moreover, Tyumen is a famous mosquito region! The creators of the profile should have foreseen such an attack!

Another negative comes, rather, from the installers: due to its large thickness, the Exprof profile is difficult to bend; it is not the best suited for glazing arched window structures. This is a real problem, to which, perhaps, the designers of the Tyumen enterprise will properly respond.

Glazing of the Orthodox center with Exprof profiles

There are also comments like: “Before, when there were wooden windows, it blew from the windows, now it blows from under the windows.” As they say, either in the forehead or in the forehead; but Exprof window profiles obviously have nothing to do with it.

Judging by the frequency of calls found on consumer websites to order Exprof windows only from reputable companies, artisanal workshops simply cannot cope with the assembly and installation of windows with ExProf profiles.

That’s why it starts to blow “not from the window, but from under the window.”

Conclusion: “ExProf” windows must be ordered from reputable organizations!

Breathable windows Exprof Aero

The Practica, Profecta, Experta and Suprema systems are compatible with wide frames that have a special internal structure. The installation depth of such elements is 101 mm. If you combine a regular profile for the sashes and an upgraded system for the frame, you can assemble windows with improved characteristics. The addition to the name of the system in the form of the term “Aero” means that windows assembled from such profiles are capable of independently ventilating rooms. Ventilation of interior spaces occurs with hermetically sealed doors. The secret of this technology is that the Exprof PVC profile has special channels through which air enters the rooms from the street. This process occurs due to natural draft, which is formed due to a slight difference in the pressure values ​​​​on the street and in the rooms. In winter, the air has time to warm up inside the profile, due to which heat loss during such ventilation is minimized.

Exprof tested these systems and experimentally proved that Exprof Aero breathable windows function well even when the temperature drops to -20 °C. The design of the air intakes, which are located on the outside of the windows, prevents water, dust and other debris from entering the profile. Valves that allow heated air to pass into the premises are located in the upper part of the frame. With a strong wind in winter, up to 12 m³ of cold air can enter a room through one window per hour. However, even this volume is not enough to significantly reduce the temperature in the interior.

Independent expert council

The system passport was developed by ExProf company specialists based on STO EXPROF – 1.3 – 2022 “Regulations on the procedure for the development and approval of a system passport” in accordance with the standards of the Union of Manufacturers of Polymer Profiles for SPK (STO SPPP) and approved by an independent Expert Council consisting of:

• Datsyuk T.A. – Doctor of Technical Sciences, head of the department of the St. Petersburg State University of Architecture and Civil Engineering (SPbGASU), deputy director of the testing center of SPbGASU;
• Mikov V.L. – Ph.D., expert, responsible executive for the development of STO SPPP;
• Sokolov N.A. – Doctor of Technical Sciences, Head of the Thermophysical Measurements Sector at VNIIM named after. DI. Mendeleev;
• Chernenko E.N. – Director of LLC “Center for Standardization and Research of Building Structures”;
• Borkin A.I. – technical director of TD “ExProf”;

About certificates: Declension of the word Certification in singular and plural cases