Window and door profiles Novotex is positioned as a budget profile system. The company producing this profile (“People's Plastic”) is a manufacturing company whose activity is the production of a system of window and door profiles. Geographically, the company's production is located in Klimovsk, Moscow region, and it has been open since 2001, which indicates the successful entry into the market of a budget solution from Novotex, in the PVC profile industry.
All main and auxiliary equipment used to produce Novotex profiles was purchased from world-famous companies such as “Demag”, “Krauss-Maffei” from Germany, “Technoplast”, Grainer” from Austria, “Amut” Italy, “Barberan” Spain.
Novotex windows are a domestically produced window profile, which, however, is not inferior in quality to its European counterparts. Although externally these plastic windows can be distinguished immediately by their simple classic design without unnecessary details and artistic lines.
Novotex plastic windows are produced using modern equipment purchased from European manufacturers, with mandatory compliance with all recipes and technologies.
Before windows are sent for sale, they undergo several stages of inspection and testing, which are carried out in a special laboratory.
Plastic windows, the price of which is significantly lower than the cost of analogues from Europe, have a very significant difference - complete adaptation to operating conditions in Russia. Novotex products will not freeze, will not allow heat to leave your home or summer heat to enter it, and will protect you from wind and noise.
The classic design of Novotex plastic windows makes it possible to use them in any exterior and interior. In addition to the standard white color, 11 lamination options are offered.
The service life of these windows is 40 years, which is confirmed by certificates.
PVC window profile Novotex Classic
Novotex Classic plastic windows are the result of work on combining the best and most stable achievements of designers, technologists and constructors within one model. The variety in which plastic windows from Novotex are presented today allows us to consider them as windows for every taste. However, in any case, among numerous options, a potential client or customer has to make a choice.
Novotex Classic, based on the name, seems to be just the option that is suitable for clients looking for stability, reliability and functionality, but without any strict requirements and strict conditions. The Novotex Classic profile, tested and proven to be effective, is the best plastic windows for those seeking traditional quality with a modern approach to profile functions.
It cannot be emphasized enough that the price of Novotex Classic plastic windows is one of the most affordable. At the same time, the calculation of the cost of plastic windows of this model is in no way affected by the color of the seal chosen by the client (gray, white) and the ability to add window accessories. Moreover, Novotex Classic PVC windows meet modern European standards, and therefore almost any current window fittings can be combined with them.
Installation of Novotex Classic plastic windows is possible in a cold climate zone, which is confirmed by numerous control and inspection activities carried out in our country.
Specifications:
| Thermal protection coefficient Ro,(m² × C°)/W | 0,71 |
| Mounting depth | 58 mm |
| Number of cameras | 4 |
| Type of glass unit | Standard, thickness from 4 to 36 mm |
| Seal color | black, gray, white |
These are traditional four chambers, eliminating the fundamental possibility of freezing of the window structure. This is a profile width of 58 mm and a set of special beads for sealing, 4-6 mm thick. This also includes a variety of window fittings, strong fastening of sashes using special screws and anti-ultraviolet spraying on double-glazed windows, which prevents the harmful effects of UF.
The heat transfer resistance index for Novotex Classic windows is 0.65, the level of sound insulation reaches up to 45 dB, and special technologies for arranging the inter-chamber space inside the profile guarantee a zero level of cold spread through the metal inside the structure.
Blitz survey: Do you have plastic windows installed in your home? From our previous article you can find out which PVC windows are best installed in your home and why.
PVC window profile Novotex Light
Today, buying plastic windows is not a problem. But choosing the most suitable for your case, and at the same time durable, with high-quality installation services and a long-term quality guarantee, is much more difficult.
Now many customers are looking for opportunities to buy plastic windows that have small dimensions and minimal weight. At the same time, many people simultaneously need cheap plastic windows, since saving in our time is by no means superfluous.
Is it possible to combine one with the other and choose plastic windows that would correspond to a similar approach? Yes!
These are the PVC windows of the Novotex Light model . Firstly, plastic windows from the manufacturer Novotex are always characterized by affordable prices combined with affordable quality. Secondly, the installation of plastic windows from this company is traditionally recommended for areas with a harsh climate, which, in fact, includes Russia, the country of manufacture of Novotex products. Thirdly, the Light model, which is quite clear when the name itself is translated into Russian, is lightweight - both in weight and in size (while maintaining the main characteristics).
Why are Novotex Light windows considered a lightweight model ? The fact is that this profile lacks one jumper and, accordingly, the number of air chambers is reduced to three. This cannot be said to seriously reduce noise insulation or heat retention. These aspects remain almost unchanged, since the overall profile width of Novotex Light is standard. Meanwhile, this significantly affects the determination of the price of plastic windows.
Specifications:
| Thermal protection coefficient Ro,(m² × C°)/W | 0,64 |
| Mounting depth | 58 mm / 112 mm |
| Number of cameras | 3 |
| Type of glass unit | Standard, thickness from 4 to 36 mm |
| Seal color | black, gray, white |
So, Novotex Light is:
- 58 mm installation width;
- total width of the glass unit from 4 to 36 mm;
- sound insulation reaching 46 dB;
- specific indicator of heat transfer resistance level 0.64;
- 9 mm removal for fitting groove;
- three air chambers;
- high-quality seals, both in the frame and in the window sashes;
- reinforced frames and sashes;
- the ability to mount various accessories for plastic windows;
- system to prevent condensation accumulation;
- aristocratic design, classic Novotex appearance.
Manufacturing of Novotex profile
The company's production facilities are located in the town of Klimovsk near Moscow. This is where the modern plant is located, which began operations back in 2001. Compared to competitors from Europe, this company does not have a fifty-year history and significant experience, however, the quality of Novotex windows can be easily compared to the leaders in window production, which are known in the modern window industry.
The production of Novotex window profiles is carried out on modern machines “Krauss Maffei”, “Demag” (Germany), “Grainer”, “Technoplast” (Austria), “Amut” (Italy), “Barberan” (Spain). This guarantees excellent technical characteristics of the plastic window profile and competitiveness in the modern market of window technologies in Russia.
Strict quality control is carried out at each stage of production, which guarantees high yields. Attention is also paid to the assortment. Today, every customer will be able to choose for themselves a high-quality, modern window, which will become the pride of production and will be able to qualitatively improve quality indicators.
PVC window profile Novotex Termo
Nobody likes it when the comfort and coziness of a room is compromised by the influence of external factors. That is why it is important to install plastic windows on time, paying enough attention to what kind of plastic windows they will be.
One of the best solutions in terms of heat conservation is windows from the manufacturer Novotex model Termo . These are windows that are manufactured and tested in Russia, but using the most advanced technologies from around the world. For Novotex Termo, heat preservation is also combined with decent sound insulation and durability.
The main features of the model are the increased profile width (as much as 70 mm!) and five air chambers . In addition, it is useful to buy Novotex Termo plastic windows for several other reasons.
In particular, this is a very attractive profile design - soft bevels (35 degrees), smooth lines and a harmonious, high-quality seal of the rebate. In addition, it is necessary to note the fact of unification of this profile with other Novotex models in terms of internal reinforcement of frames and sashes, elements such as window fittings and window accessories, sealing beads, etc.
Specifications:
| Thermal protection coefficient Ro,(m² × C°)/W | 0,86 |
| Mounting depth | 70 mm |
| Number of cameras | 5 |
| Type of glass unit | Standard, thickness from 4 to 40 mm |
| Seal color | black, gray, white |
Novotex Termo PVC windows also have an increased window opening width for light transmission. It is 112 mm. In this case, a double-glazed window with a thickness of up to 42 mm and a depth of up to 20 mm can be used. This guarantees a reduction in the likelihood of condensation falling out, and also creates the possibility of its removal if it occurs due to a specially made slight slope of the profile.
Novotex Termo also provides heat transfer resistance of 0.86, sound insulation from 45 dB (in the case of 36 mm double-glazed windows) and enhanced protection against external penetration and attempts to break into the window system. The latter is due, in particular, to the use of a special 13-mm groove in the fittings.
Blitz survey: Is it necessary to switch plastic windows to summer/winter mode? From the article you can learn more about the winter and summer modes of plastic windows.
NOVOTEX WINDOW AND DOOR PROFILE
The most affordable profile we offer is Novotex.
This profile is produced in Russia, taking into account the characteristics of operation in our climate. The production complex is located in Klimovsk, Moscow region, and has been operating since 2001. It is equipped with more than thirty extrusion lines that operate smoothly and produce a product whose quality, technical and operational characteristics are not inferior to the best European analogues. Mixing preparation, extrusion and other auxiliary equipment were purchased from such world-famous companies as Demag (Germany), Grainer, Technoplast (Austria), Amut (Italy), Barberan (Spain). When designing the profile system, the requirements of window manufacturers were taken into account in order to achieve rational production, optimize warehouse stocks and unify with existing technologies and equipment. The system developers used the experience of the best European manufacturers, but paid special attention to the increased thermal insulation requirements for Russia. The design features of the Novotex profile include increased resistance to heat transfer and, as a result, the absence of freezing of window and door structures. The Novotex profile system allows you to install all main types of window and door structures; in addition, it is possible to manufacture complex structures using auxiliary profiles from other manufacturers. During production there is a Quality Laboratory, which allows you to track products at each production stage. The conclusion about the high quality of the finished product is based on the results of constantly conducted tests. The Novotex plastic profile system has passed the necessary certification tests, which is confirmed by state certificates and certification test reports.
3-chamber Novotex Light system, 58mm
Economical profile for glazing new buildings and replacing old windows in existing ones
PVC window profile Novotex Ecoline PRO
Plastic windows from the manufacturer Novotex are traditionally characterized by decent performance on the main points that are usually taken into account when evaluating window structures. We are talking, first of all, about sound insulation and thermal conductivity, as well as strength and durability.
Of course, Novotex plastic windows are presented in a very wide range of models, which makes it possible to meet the needs of customers with a different set of requirements. Among the variety of Novotex, Novotex Ecoline PRO windows occupy a special place . Below we will look at the basis on which a decision may be made to buy plastic windows of this particular model.
The main feature of Novotex Ecoline PRO PVC windows is the thickened profile wall. Its thickness is, in particular, as much as 2.9 mm, which is not considered typical for standard models. Please note that we are not talking about the total thickness of the profile itself or the thickness of the entire window structure, but specifically about the material from which the profile walls are made.
This figure corresponds to the standards that allow us to classify the Novotex Ecoline PRO window profile as class A, that is, premium, and therefore the best among plastic windows. The reinforced wall thickness of the window profile guarantees an increase in the strength of the profile due to denser and higher-quality welding seams. In addition, denser material is much less susceptible to color changes (windows remain perfectly white), loss of glossy shine, etc. Thus, year after year, Novotex Ecoline PRO PVC windows remain reliable and beautiful.
Specifications:
| Thermal protection coefficient Ro,(m² × C°)/W | 0,86 |
| Mounting depth | 70 mm |
| Number of cameras | 3 |
| Type of glass unit | Standard, thickness from 4 to 36 mm |
| Seal color | black, gray, white |
Moreover, the Novotex Ecoline PRO window system is produced exclusively using modern technologies ( CaZn ) using environmentally friendly materials. The product does not contain lead and even has a positive recommendation from the Russian Academy of Sciences, which implies the ability to install Novotex Ecoline PRO plastic windows in children's institutions, medical premises, etc.
One cannot fail to say much about the design in which all Novotex Ecoline PRO models are made.
PVC window profile Novotex Ecoline Balance
Increasing the wall thickness with which plastic windows are equipped is usually a step towards creating additional strength, as well as enhancing the existing functions of the entire structure. When it comes to plastic windows from the manufacturer Novotex, the thickened profile wall refers to the Novotex Ecoline Balance model.
Thus, Novotex Ecoline Balance windows have a profile wall thickness of 2.9 mm . Due to this, as well as the highest indicators of heat retention and noise absorption, these products are considered “premium” class or class A.
So, why does a thick profile wall make PVC windows better and more reliable? First of all, the point is to improve the soldering of the various components of the window structure to each other. The quality of the weld will naturally be higher if the weld seam is large enough. This, in turn, increases the period of guaranteed and reliable use of the window system without the likelihood of loss of any basic properties.
It is worth mentioning separately that the thickened wall is also less susceptible to external factors such as moisture or cold, as well as sunlight, which can change the texture of the material and its color. A dense window wall is almost completely free from the problem of fading, fading, mold and rust. Year after year, Novotex Ecoline Balance windows will remain as snow-white and pleasing to the eye with their glossy shine as on the day of purchase.
An interesting feature of the model is the gray seal, which is attached to the profile through a smooth transition from the glass unit. Due to this, the entire structure looks neat, and the light transmission area increases.
Specifications:
| Thermal protection coefficient Ro,(m² × C°)/W | 0,86 |
| Mounting depth | 57 mm |
| Number of cameras | 3 |
| Type of glass unit | Standard, thickness from 4 to 36 mm |
| Seal color | black, gray, white |
It is also noteworthy that Novotex Ecoline Balance is, judging by the name, one of the manufacturer’s environmentally friendly models. The materials are completely safe, do not contain hazardous compounds (primarily lead), and do not emit harmful substances during operation. This is confirmed by the recommendations given by Novotex Ecoline Balance by the Russian Academy of Sciences, as well as the patented CaZn technology.
In terms of technical characteristics, the class A window profile Novotex Ecoline Balance has the following features:
- three standard air chambers;
- thickened walls of 2.9 mm;
- sound insulation level reaching 32 dB;
- transmission resistance at a coefficient of 0.86;
- ability to withstand frost down to minus 55 degrees Celsius;
- A variety of fittings for plastic windows and window accessories can be used.
By deciding to order Novotex Ecoline Balance plastic windows, you receive a unique set of characteristics that are responsible for quality, environmental friendliness and aesthetic appeal.
PVC window profile Novotex Ecoline Nordic
“ Technological novelty ” on the market is not a completely unambiguous concept and is largely temporary, since what was considered yesterday as something unusual and revolutionary is already today at best the norm, and at worst fades into the background as outdated. However, among the innovations introduced into production there are always those that turn into classics and occupy a very strong place in the market of existing proposals.
When it comes to plastic windows, Novotex Nordic windows are considered such an innovation. It is these PVC windows that should be considered a product that will perfectly satisfy the requirements of the most demanding customers and at the same time reflect the highest performance on standard points: heat conservation, sound insulation, service guarantee.
Indeed, Novotex Nordic appear, if not as definitely the best plastic windows on the market, then certainly as worthy contenders for such a title. This model is distinguished by a combination of three profile sealing contours, which actually allows us to talk about Novotex Nordic as a window system, and not just about plastic windows.
The model is equipped with no more or less than six air chambers, and this can already be considered the maximum in terms of sound insulation and temperature preservation. Moreover, not only the window chamber itself, but also each of the sashes has six cameras!
Installation of Novotex Nordic plastic windows is carried out to a greater depth than is usually customary. In particular, we are talking about an installation depth of 26 mm and an installation width of 82 mm.
The described indicators are already quite sufficient to classify the Novotex Nordic window system as the highest class A for plastic windows. Belonging to class A is also a full guarantee in terms of strength, durability and reliability. The Novotex Nordic window system is protected from burglary, as well as from the destructive effects of cold, heat or moisture, which often lead less durable structures to delamination and deformation.
Blitz survey: What color can a plastic window be? From the article you can find out what colors plastic windows come in.
Specifications:
| Thermal protection coefficient Ro,(m² × C°)/W | 0,92 |
| Mounting depth | 82 mm |
| Number of cameras | 6 |
| Type of glass unit | Standard, thickness from 4 to 54 mm |
| Seal color | black, gray, white |
Moreover, the installation of Novotex Nordic plastic windows is also a step towards environmental friendliness , since these products are manufactured using safe technologies from environmentally friendly raw materials, without the use of lead and other hazardous substances and their compounds. In this case, the innovative CaZn technique is used, which has proven itself on the market as an example of high quality.
As for the appearance of Novotex Nordic windows, this aspect in no way lags behind the general trend of profile progressiveness. The Novotex Nordic window system looks very modern and aesthetically pleasing, as it ensures an exceptionally harmonious design in the transition from the glass unit to the edge of the profile, as well as geometric clarity of the lines. An additional positive factor in the design of the Novotex Nordic profile should be considered rounded bevels made using patented Soft-design technology, which once again proves the model’s commitment to the premium class. The surface of the windows remains perfectly smooth and remains snow-white throughout the entire period of use.
In terms of technical characteristics regarding Novotex Nordic, we additionally pay attention to the following:
- The presence of reinforced inserts in the window frame and sashes.
- The width of the built-in double-glazed window (possibly double-chamber) is up to 54 mm.
- Heat transfer resistance corresponds to a coefficient of 0.92.
- The installation depth of double-glazed windows is 26 mm.
So, if you are going to buy plastic windows, then be sure to pay attention to Novotex Nordic. These are products adapted to the harsh Russian winters and developed in our country, taking into account all its features.
PVC window profile Novotex Techno 58
No matter how elite or advertised these or those plastic windows may be, in the end, in any case, they simply must cope with the requirements that are placed on them by the end user. This, in particular, is maintaining a constant temperature in the room and preventing heat or cold from outside. This also limits the penetration of unnecessary sounds. This is, finally, strength, providing protection against burglary and durability of the system for opening and closing the doors for ventilation.
The specific specifics of these functions are widely represented in the models that offer plastic windows from the manufacturer Novotex. At the same time, Novotex is guaranteed to be one of the most worthy windows on the modern Russian market. Among them, you will definitely be able to find the best plastic windows for yourself.
A worthy contender for this title is PVC windows model Novotex Techno 58 . What are the characteristics of such windows? First of all, its optimality.
Indeed, the Novotex Techno 58 model offers the classic installation width of the window profile, which is 58 mm, with three air chambers. At the same time, thanks to the use of classical standard approaches to designing the shape of the Novotex Techno 58 window structure, the most variable window fittings and numerous window accessories from different manufacturers are easily combined with this profile.
Meanwhile, Novotex Techno 58 also has unique characteristics that make this model stand out and distinguish it from other representatives of the Novotex line.
In particular, the possibility of cold air moving between the internal chambers of the profile is completely eliminated. This is guaranteed thanks to the presence of special sealed liners between the chambers. Plus, the tightness of the window structure is also enhanced by the presence of a set of glazing beads of different sizes for varying degrees of sealing.
Specifications:
| Thermal protection coefficient Ro,(m² × C°)/W | 0,86 |
| Mounting depth | 58 mm |
| Number of cameras | 3 |
| Type of glass unit | Standard, thickness from 4 to 36 mm |
| Seal color | black, gray, white |
Installation of plastic windows of the Novotex Techno 58 model is a step towards reliability, since the screws used to fasten the structure have an increased length and thus pass through all three walls of the profile. Moreover, the fittings for Novotex Techno 58 plastic windows are attached even more firmly, since reinforcing inserts and special grooves inside the profile are used, which prevent the fitting elements from moving.
Finally, the installation of Novotex Techno 58 plastic windows is also good in the context of protection from excessive ultraviolet radiation, which is completely inappropriate, especially in residential areas. Filtration of UV rays is carried out using a special coating on the glass unit and the edges of the profile.
So, if you need to buy plastic windows from the manufacturer Novotex in a classic version, which at the same time is not devoid of individuality, pay attention to the Techno 58 model.
Plastic windows Techno 58 mm
We present to you a new product for 2022 - plastic windows TECHNO (Techno) from the leading Russian brand Novotex. For 16 years now, a production complex in the Moscow region has been producing systems of window and door profiles equal in quality to the best European models. “Novotex” is a brand of plastic windows manufactured by a Russian company in the city of Klimovsk. The main advantage of windows of this brand is the cost in comparison with foreign analogues. Plastic window systems from a Russian manufacturer are made in accordance with all international standards, have decent quality characteristics and are absolutely safe. And, most importantly, they are adapted to the Russian climate. Novotex Techno 58 windows perfectly withstand harsh Russian weather, temperature instability and high humidity. Today, several series of plastic systems are produced under the Novotex brand, the most popular among which is Novotex Techno 58 mm. The Techno 58 series in Togliatti has proven itself to be one of the most popular products on the market of plastic window systems. This type of plastic windows is suitable for use in almost any building, be it a residential building, a hospital or a bank. The profile part of the window is made of high-quality polyvinyl chloride, equipped with three chambers, with a large thickness of the outer wall. The profile width is 58 millimeters and provides for the installation of one and two chamber double-glazed windows. The reinforcing insert in the profile itself is located in the central chamber, so heat leakage is eliminated. Techno 58 plastic windows have excellent heat-saving and noise-insulating properties, and thanks to their aesthetic appearance, these window systems will look great in any modern building. Technical features of the Techno 58 window series:
• Installation width 58 mm. • The profile has 3 air chambers that prevent cold from flowing from the street onto the metal. • Wall thickness, like that of leading European manufacturers, is 2.6 mm. • Possible glass size is from 24 to 32 mm. • The heat transfer resistance coefficient of the profile is 0.6. • When fixing the hinges, the screw penetrates through three walls, which allows for a more durable fastening; • The bead has a classic square shape. The flat and smooth surface does not require special care. We have supplemented the profile with: • A metal reinforcing liner 1.4 mm thick. • Roto NT or Axor fittings to choose from. • EPDM seal. • Mosquito nets with metal fastenings. And we got a window of good quality, easy to use and at an attractive price.
Plastic windows "Novotex" Techno 58 mm are attractive due to the excellent combination of low cost and excellent quality from one of the best manufacturers in our city of Tolyatti. in Togliatti has been successfully producing plastic windows for more than 18 years and is equipped with fully automated production lines, which allows us to achieve impeccable performance, strict lines, excellent tightness and durability in operation. And ours has been an official partner and representative of Unis Group for many years. Plastic windows “Novotex” Techno 58 mm are an excellent solution for glazing window openings in residential premises for any purpose.
PVC window profile Novotex Techno 70
Plastic windows from the manufacturer Novotex are a real choice for those who know a lot about an individual approach and variety. The Novotex company strives to ensure that each client can choose and buy plastic windows that are individually suitable for him. It is important that this is achieved largely due to the fact that Novotex PVC windows are completely focused on the climate and consumer needs of Russia.
Techno 70 model windows stand out among other Novotex representatives with their innovative design, which is harmoniously combined with enhanced profile characteristics. Thus, the installation of plastic windows of this modification is associated simultaneously with an increase in strength and reliability, and with the use of modern aesthetic design capabilities.
Let us outline what is remarkable about Novotex Techno 70 plastic windows and what specific parameters this model has from a technical point of view:
- Installation width 70 mm;
- Number of air chambers – 5 pieces;
- Double-glazed window installation depth – 20 mm;
- The width of the light opening is about 112 mm (extended variation);
- Standard double-glazed window 36 mm (it is possible to install reinforced double-glazed windows up to 42 mm thick);
- Sound insulation value – from 45 dB;
- The resistance index to the heat transfer process is 0.86;
Thus, the installation of plastic windows of the Novotex Techno 70 model is associated with increased noise absorption capabilities, counteracting the formation of condensation both inside and outside the profile, as well as increased burglary protection.
Specifications:
| Thermal protection coefficient Ro,(m² × C°)/W | 0,86 |
| Mounting depth | 70 mm |
| Number of cameras | 5 |
| Type of glass unit | Standard, thickness from 4 to 36 mm |
| Seal color | black, gray, white |
The fittings for Novotex Techno 70 plastic windows are usually original and uniform for all Novotex, however, specific accessories for plastic windows from third-party manufacturers may also be used.
Concluding the description of the Novotex Techno 70 model, we additionally note that such windows are also exceptionally good in terms of design. We are talking about rounded profile bevels (35 degrees) and elegant flowing lines.
All features and selection rules
From the training video you will learn what to look for when choosing a profile and glass unit for translucent products.
| It is worth noting that this brand belongs to the most budget-friendly glazing option, but nevertheless, it fully complies with the declared technical characteristics, is certified according to all legal requirements and adapted to the climatic conditions of Moscow, which allows them to be successfully used for glazing the majority of residential buildings. |
Why should you choose Novotex plastic windows?
NOVOTEX windows are produced in our country , but in the process of their production and installation the most modern and high-quality equipment from Europe (Austria, Germany, Italy, Spain) is used. Temperature changes, unnecessary dust, noise, moisture - all these unpleasant external factors are completely inappropriate indoors. To maintain comfort and tranquility, to protect against negative environmental impacts, installing NOVOTEX plastic windows will be a reliable means and the right choice.
Each profile has a double seal along the contour . The characteristics of NOVOTEX windows are such that they can be installed in a window opening of any room or built into structures made from a wide variety of materials. The strength of the profile is consistently high due to the fact that each model uses a built-in metal frame.
By choosing NOVOTEX windows , you receive a quality certificate with a guarantee for up to 40 years. At the same time, high-quality repairs of PVC windows are carried out separately, as necessary, also in accordance with European standards.
It is impossible not to draw special attention to the fact that NOVOTEX provides a unique opportunity to buy plastic windows inexpensively. This is very important, since reasonable spending of funds is never superfluous.
In terms of technical properties, NOVOTEX windows fully comply with Russian GOSTs , and therefore they are recommended for installation even in medical institutions and institutions intended for children (kindergartens, schools, etc.). This is complemented by the ability to choose the appearance of the profile, its color, shape, and the preferred fittings for windows can also be selected.
Techno 58 windows have a wide range of advantages, in particular:
- excellent moisture resistance and sound insulation;
- lack of tendency to freeze;
- impeccable appearance, especially if good fittings are selected;
- moderate cost compared to imported analogues;
- long service life (subject to proper and timely maintenance).
In addition, the windows of the Techno 58 series are reliably protected from the destructive effects of ultraviolet rays by means of a 20mm high edge fusing. Thanks to the presence of hidden planes in this profile, the process of installing fittings and a reinforced liner is much easier, since the possibility of the screws breaking off during fastening is eliminated. It is also worth noting more reliable and durable fastening of the hinges to the structure, which is achieved through a screw that practically passes through three walls. Another distinctive feature of the Techno 58 profile is that the reinforced liner chamber is located between the small ones. In this way, the developers ensured that the cold does not flow through the metal and the windows do not freeze.
