Plastic windows WINTECH THERMOTECH 742

The WINTECH company in Russia specializes in the production of PVC profiles for translucent structures; since 2000, Wintek Plastic LLC has been successfully selling profiles under the WINTECH brand. Vintek Plastic LLC is a subsidiary of one of the largest industrial enterprises in Turkey, ADOPEN, which in turn is part of the ADO GROUP concern.

Due to the progressive pace of housing construction over the past decade in the Russian Federation, the demand in the glazing market has also increased, so the WINTECH company began to set up production facilities in 2004. Already on August 15, 2006, in the Serpukhov district of the Moscow region, the WINTECH PVC profile production plant began its work.

The plant's capacity allows it to produce approximately 20,000 tons of profiles per year ; its production uses high-tech equipment, on which Vintek PVC profiles are produced by extrusion using a patented recipe. The most successful products for central Russia are Isotech and Thermotech profile systems.

Optimally suited for the climate of the central region in combination with double-glazed windows, they meet all the requirements of large cities with their busy highways, noisy everyday life and mood-changeable weather. Note that the Vintek profile is a budget option, which increases its attractiveness. Plastic windows from the WINTECH profile are universal for a country or country house, cottage, apartment, townhouse, bathhouse, warehouse or office.

PVC window profile Wintech Thermotech 752

Wintech Thermotech 752 is a five-chamber system with a profile width of 70 mm, an outer wall thickness of 3 mm. The thickness of the glass used is 4 and 5 mm, glass unit up to 42 mm. It has an external and internal sealing contour. It has a perfectly smooth surface, as well as a large selection of laminated coatings.

Characteristics:

• profile width 70 mm
• five-chamber system
• outer wall thickness 3 mm
• possibility of choosing sashes
• bead at an angle of 45°
• perfectly smooth surface
• wide choice of laminated coverings
• the profile can be supplied with or without stretched seals and complies with international quality standards

Technical characteristics of the Wintech profile

PVC window profile Wintech Thermotech 742

Wintech Thermotech 742 is a four-chamber system with a profile width of 70 mm. There is a drainage channel designed to prevent water from entering the room through the profile. Excellent sound and heat insulation. The thickness of the glass used is 4 mm, the glass unit is 20, 24, 32 and 42 mm. Adapted to all climatic conditions.

Characteristics:

• profile width 70 mm
• four-chamber system
• a special drainage channel prevents water from penetrating through the profile into the room
• ideal heat and sound insulation
• wide choice of laminated coverings
• perfectly smooth profile surface. Quality meets international standards
• possibility of choosing sashes
• bead at an angle of 45°
• the profile can be supplied with or without stretched seals and is resistant to all climatic conditions
• thanks to a wide selection of glazing beads, it is possible to use 4 mm glass and double glazing with a thickness of 20, 24, 32 and 42 mm

THERMOTECH

• profile width 70 mm
• five- and four-chamber system
• two sealing circuits: external and internal
• the special shape of the glass rebate with a slope prevents water from penetrating through the profile into the room
• thanks to the multi-chamber structure, ideal heat and sound insulation is achieved
• perfectly smooth profile surface
• thanks to a wide selection of glazing beads, it is possible to use 4 mm glass and double glazing with a thickness of 20, 24, 32 and 42 mm
• Several sash options
• the profile can be supplied with or without extended seals
• wide selection of additional profiles

THERMOTECH 752

• Installation width, mm - 70
• Number of cameras - 5
• System class - A
• Range of glass units used, mm - From 4 to 42
• Seal material - EPDM, TPV
• Rpr. (without reinforcement), m2xS/W 0.91 (class 1)

THERMOTECH 750

• Installation width, mm - 70
• Number of cameras - 5
• System class - B
• Range of glass units used, mm - From 4 to 42
• Seal material - EPDM, TPV
• Rpr. (without reinforcement), m2xS/W 0.90 (class 1)

PVC window profile Wintech Isotech 532

Wintech Isotech 532 is a three-chamber system with a profile width of 58 mm, the thickness of the outer wall is 3 mm, which makes it possible to obtain higher thermal and physical-mechanical characteristics of the profile. Glass width - 4 and 5 mm, glass unit - 20, 24, 30 and 32 mm. Installing a blanking profile in a groove for a bead that is not in use prevents debris and moisture from entering it. Safe for the environment.

Blitz survey: Which brand of plastic windows is the best? From our reviews of window manufacturers you can find out the advantages and disadvantages of each brand of plastic windows: KBE, Deceuninck, Proplex, Brusbox, Schuco, Grain.

Characteristics:

• profile width 58 mm
• three-chamber system
• wide choice of laminated coverings
• various sash options
• the sash with a drain gives the structure an aesthetic appearance
• perfectly smooth profile surface
• external wall thickness of 3 mm allows obtaining the best physical, mechanical and thermal characteristics of the profile
• the increased width of the rebate allows you to use glass with a thickness of 4 and 5 mm and install double-glazed windows with a thickness of 20, 24, 30 and 32 mm
• a profile is installed in an unused groove for the glazing bead - a plug that prevents moisture and debris from entering it
• a wide selection of auxiliary profiles allows you to solve the problem of high-quality and comprehensive arrangement of openings when installing translucent structures from the Isotech profile system
• there is no need for special maintenance, because the profile retains its original whiteness and shape for many years
• the system is safe for the environment, has a certificate of compliance with sanitary and epidemiological standards

ISOTECH

• profile width 58 mm
• Three chamber system
• two sealing circuits: external and internal
• the increased width of the rebate allows the use of glass with a thickness of 4 and 5 mm and double-glazed windows with a thickness of 20, 24 and 32 mm
• A plug profile is installed in an unused slot for the beading bead to prevent moisture and dust from entering it.
• the profile can be supplied with or without extended seals
• wide selection of additional profiles
• perfectly smooth profile surface

ISOTECH 532

• Installation width, mm - 58
• Number of cameras - 3
• System class - A
• Range of glass units used, mm - From 4 to 32
• Seal material - EPDM, TPV
• Rpr. (without reinforcement), m2xS/W - 0.77 (class 2)

ISOTECH 530

• Installation width, mm - 58
• Number of cameras - 3
• System class - B
• Range of glass units used, mm - From 4 to 32
• Seal material - EPDM, TPV
• Rpr. (without reinforcement), m2xS/W - 0.77 (class 2)

PVC window profile Wintech Suntech 232

Wintech Suntech 232 - Single-rail frame with a width of 92.5 mm, double-rail frame with a width of 75 mm, sash with a width of 50 mm. The system is equipped with a double seal and a drainage channel. Single or double glazing is used, in which glass 4 mm thick is used, the thickness of the glass unit is 20-24 mm. Excellent sound and heat insulation, as well as the presence of fasteners for a mosquito net.

Plastic profile for glazing balconies and loggias . It is resistant to all climatic conditions and has excellent heat and sound insulation.

Characteristics:

• single-rail frame 92.5 mm wide, double-rail frame 75 mm wide, sash 50 mm wide
• double seal
• outlet drainage channel
• excellent thermal and sound insulation
• possibility of using a mosquito net
• wide choice of laminated coverings
• various sash options
• bead at an angle of 45°
• perfectly smooth profile surface
• can be supplied with or without stretched seals, quality meets international standards
• wide selection of additional profiles
• resistant to all climatic conditions
• aesthetic appearance
• single and double glazing using glass 4 mm thick, double glazing 20–24 mm
• double brush seal on sliding frames ensures excellent insulation; no special maintenance is required; the profile retains its original whiteness and shape for many years

links to materials supplementing this article: What are the main characteristics of PVC windows?

Are plastic windows harmful or safe for human health?

Black plastic windows. What they look like in the interior

Benefits of windows

Impeccable technical and operational qualities. The use of a profile with elements of reinforcement with composite materials, which provides 25% more heat. Profiles are manufactured using high-tech equipment, according to a recipe approved by the company and are subjected to strength tests in accordance with the requirements of ISO 9002, RAL GZ 716/1, GOST, INCERC. High levels of noise insulation and resistance to work in the cold conditions of the Russian climate. Original appearance, selection of individual color solutions.

PVC window profile Wintech Suntech 222

Wintech Suntech 222 is a three-chamber system with a profile width of 63 mm and two sealing contours. Thanks to the thirty-millimeter rebate, 4-mm glass is used, and double-glazed windows are 15 and 17 mm thick. Due to this, maximum protection from light and sound is achieved.

Plastic profile for glazing balconies and loggias . It is resistant to all climatic conditions and has excellent heat and sound insulation.

Characteristics:

• profile width 63 mm
• three-chamber system
• two sealing circuits
• possibility of using a mosquito net
• wide choice of laminated coverings
• perfectly smooth and shiny profile surface
• resistant to all climatic conditions
• meets international quality standards
• a thirty-millimeter rebate allows you to install double glazing using 4 mm glass, double-glazed windows with a thickness of 15 and 17 mm. This ensures excellent thermal insulation as well as protection from light and noise.
• double brush seal on sliding frames provides excellent protection against drafts and rainfall
• the use of glazing beads with a co-extruded seal allows you to speed up the window production process

Wintech "thermotech 752"

Using the Wintech thermotech 752 profile you get the opportunity to increase the sound insulation and thermal insulation of the room by using thicker glass, not 4 mm, but 5 mm.
This design feature makes this profile more profitable to use compared to analogues. Technical parameters of the Wintech Thermotech 752 profile:

• profile width 70 mm
• five-chamber system
• outer wall thickness 3 mm
• it is possible to use glass 4 and 5 mm, double glazing up to 42 mm
• two sealing circuits - external and internal
• a special drainage channel prevents water from penetrating through the profile
• Thanks to the multi-chamber profile structure, ideal heat and sound insulation is achieved
• possibility of choosing sashes
• bead at an angle of 45°
• perfectly smooth surface
• wide choice of laminated coverings
• the profile can be supplied with or without extended seals
• meets international quality standards

Wintech "suntech 232"

For those who are looking for a compromise between high price and performance characteristics, the ideal choice is Wintech suntech 232. It has high technical performance and at the same time a competitive price. By installing window units made with its help, you will receive comfort in your home for a long time.

Technical parameters of Wintech suntech 232 profile

• single-rail frame 92.5 mm wide, double-rail frame 75 mm wide, sash 50 mm wide
• double seal
• outlet drainage channel
• excellent thermal and sound insulation
• single and double glazing using glass 4 mm thick, double glazing 20–24 mm
• double brush seal on sliding frames provides excellent insulation
• various sash options
• bead at an angle of 45°
• perfectly smooth profile surface
• can be supplied with or without stretched seals
• resistant to all climatic conditions