Wintech windows can be used to implement various renovation and construction projects. Depending on the choice of system from Vintek profiles, you can assemble inexpensive models for unheated warehouses or workshops, or premium windows for offices, cottages and apartments. A modern enterprise in the Moscow region processes up to 20 thousand tons of plastic per year, which indicates the popularity of this brand among our consumer audience. Wintech products are in demand not only in Russia. It is successfully implemented in Australia, Europe, America and Asia. Today's success is due to the vast experience of the ADOPEN industrial group, thanks to which it was possible to achieve an optimal price-quality ratio. The company's enterprises have been processing plastic since 1952. Turkish manufacturers have been practicing extrusion of components for assembling PVC windows since 1990. Currently, Vintek profile systems are produced by 7 enterprises located in Iran, Ukraine, Russia, India, Tunisia, Azerbaijan and Turkey.
Wintech profile systems
Extrusion of Wintech profiles is carried out using German and Austrian equipment. The rigid unplasticized PVC used for the production of systems is characterized by high impact strength. The mixture for plastic extrusion is prepared taking into account the future operation of windows in Russian climatic conditions. The quality and frost resistance of profiles is checked in our own testing laboratory. Turkish manufacturers selectively control profiles from each batch for compliance with the declared characteristics.
To complete Vintek systems with tightness contours, stretched TPV seals with low residual deformation made of modified polypropylene and synthetic rubber are used. Thanks to the elasticity of the contours, Wintech windows assembled from profile systems do not let water and air in from the street. The seals retain their properties in the temperature range from –55 to +125°C and do not absorb moisture, so they do not collapse or freeze during cold weather. It is also possible to equip it with a roll-in EPDM seal. Additional benefits also include:
- environmental friendliness, which is ensured by the use of the CaZn stabilizer;
- snow-white color with a blue tint;
- 9-mm rebates, eliminating blowing.
The Wintech profile can be laminated on both or one side with climate- and UV-resistant films. Thanks to the relief texture, the coatings used for finishing systems can reliably imitate natural wood. The lamination procedure is possible for all profile systems presented by the manufacturer.
PVC profile for windows, PVC profile, PC PoliTER LLC, Irkutsk
We supply various types of aluminum and plastic profiles for high-quality glazing of windows, balconies, loggias, terraces and shop windows. An aesthetically attractive and practical profile made of polyvinyl chloride is designed for the implementation of standard solutions and the creation of non-standard architectural forms. The design of the profiles gives window systems excellent heat-saving characteristics and also provides effective protection of premises from street noise.
Calculate the cost of PVC windows
Submit your application
WINTECH: reliable and modern PVC profile
The universal PVC profile for windows combines an elegant appearance and excellent performance properties. The thermal protection characteristics of the WINTECH profile are comparable to the parameters of wall structures. The modern design of the profile material ensures ideal compatibility of products with the facades of buildings of various shapes and intended purposes.
The polyvinyl chloride profile meets regulatory requirements for mechanical strength, resistance to atmospheric factors and safety during operation. Advantages of practical WINTECH products:
- Elegant appearance due to the special configuration of glazing beads;
- Double sealing contour of the rebate, eliminating the risk of hinges freezing;
- Reliable reinforcement based on reinforced steel profile;
- Adaptation to harsh climatic conditions;
- Complete with stretched seal;
- Possibility of reproducing windows of any shape with different opening methods.
A wide selection of decorative laminated coating options ensures the implementation of any design solutions with individual characteristics.
REHAU: profile systems are stylish and durable
We supply three options for REHAU profile systems, differing in design, construction and functional characteristics:
- Euro-Design is a waterproof double-circuit profile that provides complete thermal insulation of the room and guaranteed noise protection, adapted to solve architectural problems of any degree of complexity;
- Brillant-Design – high-tech products designed to equip premium class facilities;
- Sib-Design are reinforced systems characterized by increased thermal insulation properties, designed for use in harsh climatic conditions.
The impeccable quality of the polymer material used in high-tech production guarantees the durability of products used in difficult climatic conditions.
VEKA: profile systems quality and practicality
VEKA profiles combine a laconic design, ease of maintenance and operational durability. An elegant and practical PVC profile with a number of chambers from 3 to 6 is available in various modifications:
- Euroline is a classic option for implementing standard and non-standard solutions;
- Proline – for creating windows with improved thermal insulation characteristics;
- Softline – high energy efficiency and safety;
- Swingline is a premium system with an attractive design;
- Alphaline is an exclusive product with the highest level of protection.
VEKA profiles of various modifications are intended for the manufacture of traditional, dormer and arched windows, glazing of loggia balconies and remote structures, as well as for the manufacture of balcony blocks of any configuration. The matte surface of PVC profiles with a glossy shine effect ensures an impeccable appearance of the products during many years of use.
ECP PLASTICS: profile systems for harsh climates
ECP PLASTICS profile systems, produced using Austrian technologies, are equipped with reliable sealing contours that provide guaranteed protection of the room from the influence of atmospheric factors. The range includes two types of PVC profiles:
- City Plast is a universal option for implementing projects in the field of urban construction;
- Arctic Plast – products with increased thermal insulation properties.
KBE: products for demanding users
The company's products meet strict environmental requirements. Greenline technology ensures the production of high-quality profiles that are resistant to the aggressive influence of external factors. To ensure that polymer products meet high environmental standards, lead salts in the PVC profile are replaced with calcium and zinc compounds.
The products of the German company KBE combine:
- Style and durability.
- Exquisite appearance and high strength.
- Excellent thermal insulation properties.
- Wide range of plastic profiles.
- Ensures the implementation of projects of any degree of complexity.
The range of profile systems produced by KBE includes high-quality products with a width of 58, 70, 76 and 88 mm. Complete thermal insulation of premises is achieved through a special design of a multi-chamber profile, which ensures hermetic fixation of double-glazed windows.
We supply window structures and glazing systems that meet regulatory requirements for energy-efficient and safe construction. Qualified employees of PC PoliTER provide the development and implementation of standard and non-standard projects of any degree of complexity. Call today to order high-quality glazing profiles!
Leave a request for a free call to a surveyor
Our phones:
+7 (3952) 458-555+7 (3952) 73-444-0
pkpoliter.ru
Isotech 530 (Isotech 530)
The Isotech 530 profile system is designed for the assembly of economy category windows with an installation depth of 58 mm and a low level of heat conservation. These designs from class “B” profiles are not recommended for glazing of office and residential premises. The main area of application of Vintek 3-chamber windows is balconies, loggias, internal partitions, warehouses, workshops. The advantage of this inexpensive system is that PVC has a special glossy coating that repels dirt.
Isotech 532 (Isotech 532)
This series of “A” class profiles differs from the basic analogue in the thickness of the outer walls increased to 3 mm and improved thermal characteristics. However, the difference between 530 and 532 systems is not so fundamental as to use such windows for operation in the central and northern regions. Isotech 532 profiles are compatible with anti-burglary fittings. They, like the 58 mm class “B” system, have a glossy, dirt-repellent surface. The rounding of the sashes on the street side visually “lightens” the Isotech windows. Thanks to their smooth shapes, the structures stand out on the facade plane and look elegant.
Wintech pricing policy
Plastic windows with Wintech profile
Like most companies that want to work not with officials, but with consumers, Wintech in Russia builds its pricing policy on the basis of the accessibility and understandability of all information. In order to obtain information about the cost of products and services, you do not need to spend a long time searching the Internet or making tedious calls to retailers.
A query in any search engine will provide a lot of information; We will use the price lists of one of the most famous companies in Moscow - “Your Windows”.
| Isotech 532 with single-chamber glazing 24 mm | Thermotech 752 with double-glazed window 42 mm | Poletech W80 with double-glazed window 42 mm | |||||||
| Window type | Price without installation, rub. | Price with installation, rub. in a panel house | Price with installation, rub. in a brick house | Price without installation, rub. | Price with installation, rub. in a panel house | Price with installation, rub. in a brick house | Price without installation, rub. | Price with installation, rub. in a panel house | Price with installation, rub. in a brick house |
| Double-leaf with one opening leaf, 1300x140 mm | 5820 | 9390 | 10390 | 7100 | 10480 | 11480 | 7100 | 10580 | 11580 |
| Three-leaf with one opening leaf 2030x1400 mm | 7970 | 12200 | 13200 | 9200 | 13630 | 14630 | 10740 | 15050 | 16050 |
Thermotech 742 (Thermotech 742)
Profile systems of this series are suitable for the manufacture of budget window models that can be used in residential and commercial buildings located in regions with a temperate climate. Thermotech 742 windows have an installation depth of 70 mm and 4 internal chambers, due to which the structures assembled from them have good thermal characteristics. Thermotech 742 profiles belong to class “B”, since the thickness of their outer walls does not exceed 2.5 mm. By increasing the installation depth, manufacturers were not only able to reduce heat loss through frames and sashes, but also ensure the installation of thick double-glazed windows. This had a positive effect on the total heat saving of 4-chamber windows.
PVC window profile Wintech Thermotech 742
Wintech Thermotech 742 is a four-chamber system with a profile width of 70 mm. There is a drainage channel designed to prevent water from entering the room through the profile. Excellent sound and heat insulation. The thickness of the glass used is 4 mm, the glass unit is 20, 24, 32 and 42 mm. Adapted to all climatic conditions.
Characteristics:
- profile width 70 mm
- four-chamber system
- a special drainage channel prevents water from penetrating through the profile into the room
- ideal heat and sound insulation
- wide choice of laminated coverings
- perfectly smooth profile surface. Quality meets international standards
- possibility of choosing sashes
- bead at an angle of 45°
- the profile can be supplied with or without stretched seals and is resistant to all climatic conditions
- thanks to a wide selection of glazing beads, it is possible to use 4 mm glass and double glazing with a thickness of 20, 24, 32 and 42 mm
Thermotech 750 (Thermotech 750)
The “B” class system with 5 chambers and an installation depth of 70 mm was developed for those who want to reduce heat loss to a minimum in the autumn-winter period without overpayments. Steel reinforcement with a wall thickness of 1.5 mm eliminates deformation and blowing of structures. The presence of an additional chamber in the profile makes it even more difficult for cold to penetrate. Thermotech 750 windows are warmer and quieter than the 742 series models.
Thermotech 752 (Thermotech 752)
Thermotech 752 profiles are an improved version of the two previous systems. They have 5 chambers, and the thickness of their outer walls is 3 mm, which corresponds to “A” class. Thanks to this, Thermotech 752 windows are even warmer and more stable than structures assembled from 740 and 750 systems. That is why they are recommended for installation in openings on the upper floors of buildings. The increased number of internal partitions, the thickness of the external walls and the presence of 1.5 mm reinforcement help withstand high wind loads. Thermotech 752 windows do not allow moisture and air to pass through from the street, even under the most unfavorable weather conditions.
Thermotech profiles are interchangeable, which simplifies the assembly procedure of complex structures. Regardless of the thickness of the outer walls and the number of internal chambers, they are all compatible with anti-burglary fittings.
Plastic windows WINTECH. Profile Vintech 70 maximum st package
Wintech
Since Wintech plastic profiles have become very popular among Russians, the company’s management organized the production of its products in the Moscow region, in the Serpukhov district. Taking into account the peculiarities of the cold subarctic climate of our Motherland, the designers endowed the manufactured profiles with a high level of thermal insulation.
In addition to the production of PVC profiles for doors, windows and balconies, it offers customers related accessories. The company released its first products in 1989, and since then it has also been producing plastic materials for finishing in specialized workshops.
The first most popular on the domestic market is the Isotech 532 profile system, the installation depth of which is 58 mm. The design of the closed reinforcing profile in the sash and frame consists of three chambers. Despite some weighting of the structure, the profile becomes stronger and more durable. The maximum width of the installed package does not exceed 32mm, this is enough to achieve a high level of heat and sound insulation of a system consisting of two chambers. In the place where the frame and sash are attached, insulation with a single system is laid, fixed in both circuits. This technical solution allows you to prevent cold air from entering the room; however, if the temperature is too low, condensation may occur inside the chambers.
In areas where the subarctic climate prevails, Termotech 742 4-chamber systems have very good performance. The installation depth of this profile is 70 mm, which makes it possible to use double-glazed windows whose width does not exceed 42 mm. Due to the presence of three hollow chambers, a so-called “cold bridge” does not form on the metal reinforcement. Since the rebate on the profile sash has a shallow pinch depth, a sufficient amount of light passes into the room. However, the use of this design requires the additional installation of a special gasket, which serves as an obstacle to the outflow of warm air. Despite the lower bevel angle compared to the Isotech system, rainwater and internal condensate are perfectly removed from the system. The color of the seal can be any, depending on the wishes of the customer.
If the client’s main requirement is a high level of noise insulation, then it is worth paying attention to the Termotech 752 5-chamber system. Processing such a profile is a labor-intensive process, since the production uses glossy PVC, resistant to low temperatures and difficult to bend. This material is highly durable, and the use of a reinforcing profile with a closed system increases the service life of the entire structure, protecting doors and windows from deformation. The system has a channel that serves as drainage; accordingly, all excess moisture is removed from the profile and does not freeze in the niches of the double-glazed window.
There is also a Suntech 232 profile, which is used in the manufacture of windows and doors with sliding systems. The installation depth of the 1-rail block is 92.5 mm, and the 2-rail block is 75 mm. The possible width of the installed glass unit does not exceed 24mm. The Suntech 222 profile, which has less weight and installation depth, is often installed on balconies and loggias.
Reliable operation of Wintech profiles of any size and shape is also achieved through proprietary fittings, which are developed taking into account all the features of the profile.
www.nikawood.ru
Plastic windows WINTECH. Super prices for WINTECH plastic windows on our website!
Wintech PS GmbH is one of the five world leaders in the production of PVC profiles for the manufacture of windows and other translucent structures, glazing of balconies and loggias. Having entered the PVC window production market in 1989, the company developed rapidly. Currently, the largest plants producing Wintech profiles are located in Germany, Turkey, Russia, Ukraine, Azerbaijan, India and Tunisia, and Wintech brand products are sold in more than 80 countries around the world.
The advantages of WINTECH profile systems are:
- The profile depth of 60 millimeters provides optimal sound, moisture and heat insulation;
- The presence of two sealing contours in the profile - internal and external;
- Rounded glazing beads, giving the structure a neat and noble appearance;
- Shiny and smooth surface that does not require special care from the high quality materials from which the PVC profile is made;
- The presence of a frame made with a Eurogroove, and this makes it possible to produce windows in which one sash will be exclusively turning, and the second will be tilt-and-turn.
Prices for plastic windows in Yoshkar-Ola:
| Wintech 530 | Wintech 530 | Wintech 530 | |||||||||
| 58 mm | 58 mm | 58 mm | |||||||||
| window | 2 glasses | 3 glasses | window | 2 glasses | 3 glasses | balcony block | 2 glasses | 3 glasses | |||
| without installation | 6000 | 6200 | without installation | 8000 | 8350 | without installation | 9000 | 9300 | |||
| "turnkey" based on a panel house | 10000 | 10400 | "turnkey" based on a panel house | 13600 | 14300 | "turnkey" based on a panel house | 15000 | 15600 | |||
In addition, WINTECH profile systems make it possible to create windows of different shapes and colors, with any way of opening them. And for this you can use different fittings and double-glazed windows in accordance with the latest technologies and developments. Choose to suit every taste, and give free rein to your imagination, because in addition to the variety of palettes and shapes, the profile systems of this brand have a neat and noble appearance, which is created by the special rounded shape of the glazing beads.
Of course, all the most important moments in the manufacture of the profile were perfectly calculated, even adaptation to weather conditions. Since in WINTECH windows the external and internal sealing contours of the rebates are created specifically to prevent freezing of the profile hinges in frosty conditions, this means that this profile can be used with equal success in both northern and southern regions.
Types of WINTECH profile systems:
thermotech 752 is a five-chamber window system with a profile width of 70 mm, an outer wall thickness of 3 mm. The thickness of the glass used is 4 and 5 mm, glass unit up to 42 mm. It has an external and internal sealing contour. It has a perfectly smooth surface, as well as a large selection of laminated coatings.
isotech 532 is a three-chamber window system with a profile width of 58 mm, the thickness of the outer wall is 3 mm, which makes it possible to obtain higher thermal and physical-mechanical characteristics of the profile. Glass width - 4 and 5 mm, glass unit - 20, 24, 30 and 32 mm. Installing a blanking profile in a groove for a bead that is not in use prevents debris and moisture from entering it. Safe for the environment.
The undoubted advantages of Wintech window systems are their long service life and optimal price-quality ratio, which makes them accessible to a wide range of people and applicable on most construction sites.
Window systems Isotech 532
Window system consisting of three chambers with a profile width of 58 mm. The outer wall thickness of 3 mm allows us to obtain the best physical, mechanical and thermal characteristics of the profile. The increased width of the rebate allows you to use glass with a thickness of 4 and 5 mm and install double-glazed windows with a thickness of 24 and 32 mm. The main characteristics of windows in Yoshkar-Ola Isotech: - Profile width 58 mm; - three-chamber system; - This is a profile that is good for glazing balconies and loggias - thickness an outer wall of 3 mm allows you to obtain the best physical, mechanical and thermal characteristics of the profile; - the increased width of the rebate allows you to install double-glazed windows with a thickness of 24, 30 mm; - a wide selection of auxiliary profiles allows you to solve the problem of high-quality and comprehensive arrangement of openings when installing translucent structures from the Isotech profile system; -various options for the sash; -the sash with a drain gives the structure an aesthetic appearance; -perfectly smooth surface of the profile; -there is no need for special maintenance, because the profile retains its original whiteness and shape for many years; - the system is safe for the environment, has a certificate of compliance with sanitary and epidemiological standards. |
Window systems Thermotech 752
Five-chamber window system with a profile width of 70 mm and an outer wall thickness of 3 mm. It has two sealing contours - internal and external and a special drainage channel that prevents water from penetrating through the profile. The use of an optimal reinforcement scheme significantly reduces heat loss from windows in Yoshkar-Ola. It is possible to install double-glazed windows with a thickness of 24, 34 and 42 mm. Main characteristics of the window in Yoshkar-Ola: - Profile width 70 mm; - four-chamber system; - special drainage channel prevents the penetration of water through the profile into the room; - ideal heat and sound insulation; - ideally smooth profile surface; - quality that meets international standards; - thanks to a wide selection of glazing beads, it is possible to use double-glazed windows with a thickness of 24, 32 and 42 mm; - the ability to select sashes; - glazing bead at an angle of 45°; - resistant to all climatic conditions. |
xn——6kcbbajywdipdcf3bggdl8bw5s.xn--p1ai
Poletech W80 (Polytech B80)
Wintech plastic windows assembled from the Poletech W80 profile system can be safely used in northern latitudes. The installation depth of 80 mm and 6 chambers will not allow the interior to cool down quickly even in severe frost. The rebate height of the profiles in this series is 21 mm, which reduces the risk of condensation forming around the perimeter of the glass unit. These windows, compatible with anti-burglary fittings, have been assigned a premium category. After all, their aesthetic and performance characteristics meet the most stringent standards.
PVC window profile Wintech Suntech 222
Wintech Suntech 222 is a three-chamber system with a profile width of 63 mm and two sealing contours. Thanks to the thirty-millimeter rebate, 4-mm glass is used, and double-glazed windows are 15 and 17 mm thick. Due to this, maximum protection from light and sound is achieved.
Plastic profile for glazing balconies and loggias . Resistant to all climatic conditions and has excellent heat and sound insulation
Characteristics:
- profile width 63 mm
- three-chamber system
- two sealing circuits
- possibility of using a mosquito net
- wide choice of laminated coverings
- perfectly smooth and shiny profile surface
- resistant to all climatic conditions
- meets international quality standards
- a thirty-millimeter rebate allows you to install double glazing using 4 mm glass, double-glazed windows with a thickness of 15 and 17 mm. This ensures excellent thermal insulation as well as protection from light and noise.
- double brush seal on sliding frames provides excellent protection against drafts and rainfall
- the use of glazing beads with a co-extruded seal allows you to speed up the window production process
Comparative table of Wintech window characteristics
Since Vintek windows were developed for use in different conditions, in the process of purchasing them you can make a mistake in choosing a model. To prevent this from happening, you need to study and compare the main characteristics of the systems. It is recommended to pay attention to the level of heat and sound absorption of structures, which depend on several factors:
- number of cameras;
- parameters of double-glazed windows;
- installation depth;
- wall thickness.
When ordering, you need to keep in mind that windows equipped with steel liners are colder than similar structures without reinforcement. However, it is impossible to refuse reinforcement with metal profiles, since in such cases heat is lost in even greater quantities through micro-cracks that are formed when the profile is deformed.
| System type | Installation depth (mm) | Number of cameras | Permissible glass thickness (mm) | Heat transfer resistance coefficient (W/m²×°C) |
| Isotech 530 | 58 | 3 | 32 | 0,65 |
| Isotech 532 | 58 | 3 | 32 | 0,66 |
| Thermotech 742 | 70 | 4 | 42 | 0,72 |
| Thermotech 750 | 70 | 5 | 42 | 0,78 |
| Thermotech 752 | 70 | 5 | 42 | 0,8 |
| Poletech W80 | 80 | 6 | 42 | 0,91 |
PVC window profile Wintech Suntech 232
Wintech Suntech 232 - Single-rail frame with a width of 92.5 mm, double-rail frame with a width of 75 mm, sash with a width of 50 mm. The system is equipped with a double seal and a drainage channel. Single or double glazing is used, in which glass 4 mm thick is used, the thickness of the glass unit is 20-24 mm. Excellent sound and heat insulation, as well as the presence of fasteners for a mosquito net.
Plastic profile for glazing balconies and loggias . It is resistant to all climatic conditions and has excellent heat and sound insulation.
Characteristics:
- single-rail frame 92.5 mm wide, double-rail frame 75 mm wide, sash 50 mm wide
- double seal
- outlet drainage channel
- excellent thermal and sound insulation
- possibility of using a mosquito net
- wide choice of laminated coverings
- various sash options
- bead at an angle of 45°
- perfectly smooth profile surface
- can be supplied with or without stretched seals, quality meets international standards
- wide selection of additional profiles
- resistant to all climatic conditions
- aesthetic appearance
- single and double glazing using glass 4 mm thick, double glazing 20–24 mm
- double brush seal on sliding frames ensures excellent insulation; no special maintenance is required; the profile retains its original whiteness and shape for many years
Reviews about Wintech windows
In order for the opinions of other customers to help you successfully choose Wintech windows, you need to study customer reviews about the systems that you plan to choose for yourself.
In addition, it is necessary to have an idea under what conditions the products were used. Alexander Nikolaevich Vluchny (retired):
“We bought Termotech 752 windows for ourselves, since my wife and I were completely satisfied with their characteristics and appearance. It's hard to find something better for this price. In addition, we were already familiar with Vintek windows, reviews of which we heard from our friends. They all praised this manufacturer and recommended it to us. Based on the results of 2 winters spent with new windows, we are satisfied with our choice.” Sergey Olshansy (window sales manager): “Immediately after the appearance of the Poletech W80 system, we formed a stable package of orders for windows from these profiles. Buyers are now looking for ways to get a premium product without overpaying for the name of popular brands. Wintech provided them with such a chance. Six-chamber windows with increased installation depth are in stable demand, since investments in them quickly pay off due to energy savings.”
Regardless of the cost and energy efficiency of Wintech windows, the quality of all models is at the same high level. Indeed, in the production of inexpensive Vintek systems, plastic is used with exactly the same recipe as for improved profiles.
Reviews about PVC profile Wintech (Vintek)
Dima . We bought plastic windows from Vintek for our store. Otherwise, buyers in the fall and winter complained about the extreme cold. And it will be very useful for storing food. Installed quickly, within a couple of weeks. There were only 6 windows. After installation, the store became much quieter, and the temperature in the room reached a comfortable level. Some heaters couldn't handle the old windows. The handles work great, the windows open easily for ventilation and completely. The mechanisms work well. Now clients don’t say anything about the cold, which means it helped. And now, for the most part, products are stored correctly with us.
Discussion: there is 1 comment
- Alaken:
04/14/2021 at 18:58Hello. We would like cooperation on wholesale purchases. To Kyrgyzstan. Please contact us, we will be glad. +996702457216. Vodsap
Answer
