Plastic profile slidors (sliders) - design and installation features

The Sliders system is designed for glazing balconies and loggias, balcony and interior partitions.

The products of the system are characterized by increased heat and sound insulation properties, tightness, strength and reliability. All components of the system are manufactured in accordance with European standards for translucent structures.

However, despite the high thermophysical properties, the system is not intended for glazing residential premises “in one thread”.

The principle underlying the SLIDORS system was developed in South Korea in the late eighties (1986) by Hanwya Chemical Corp.

In Russia, the system has been known since the early 90s, but has become widespread since the start of production of this system in Vladivostok.

Since 2001, the SLIDORS system began deliveries from Moscow.

What is the Slidors system, how does it work

The Slidors plastic sliding system, equipped with a reinforced profile, is in great demand. This modern technology in the window industry has recently appeared on the market. Sliding windows work on the principle of a wardrobe.

To find out what Sliders is, you need to get to know this brand better. This is a joint project between Russia and Korea. In a short period of time, it has proven itself well, and its high quality can compete with European manufacturers of window structures.

Scheme	Dimensions	Price*
width: 0.7+2.2+1 / height: 1.5 m.	32-35 thousand rubles
width: 2.2+1 / height: 1.5 m.	30-32 thousand rubles

The largest part of the products is produced by the Izumrud-Extrusion plant in Vladivostok. It takes into account all the characteristics of Russian consumers. Product quality control is carried out by Korean experts, and materials for its production are produced by Japan.

There are many different profiles, including semi-warm glazing. The company also specializes in the production of Slidors sliding doors. This system is in demand in many countries of the former USSR.

System Specifications

The frame is made of PVC profile, has 3 chambers and inserts that prevent wind and moisture from entering the room. The design is equipped with a double brush seal. Many similar models have a single glass unit, used for glazing balconies and loggias.

Due to the thickness of the glass unit, heat loss can be reduced by 3 times. This thickness can vary: from 6 to 14 mm.

Sliders systems for balconies have guides that allow the doors to move.

The products of this company are distinguished by a high degree of strength, since their base is a frame made of a metal profile. The window can withstand various loads, including strong gusts of wind. The design has the following technical characteristics:

1. The window profile, consisting of 3 chambers, can have a width of 58, 60 and 70 mm. Protected from freezing.
2. The design is equipped with frame corners, which make it possible to transport it in a disassembled state.
3. Durable galvanized reinforcement.
4. Equipped with a high rail and doors protected from getting wet and freezing.
5. Rounding of the rail for smooth movement of the sash.
6. Filingpis - insulation against blowing and unauthorized removal of the sash.
7. The roller facilitates easy installation and smooth gliding.
8. The sashes come complete with glass and double-glazed windows (according to customer requirements).
9. Special crescent-shaped locks that prevent burglary and freezing.
10. Double-sided seal.
11. The frame takes into account the width of the glass unit: its dimensions are 18 mm, which provides high resistance to heat transfer.

This profile is suitable for glazing balconies and loggias. Compared to aluminum structures, this profile retains heat better and is more wear-resistant.

Prejudice about installing balconies and loggias in winter

1. In winter, replacing windows leads to hypothermia of the room, with all the ensuing consequences, such as freezing of heating pipes and colds of the owners of the apartment or house. In practice this is not the case. Dismantling of old windows is carried out within 10-20 minutes. All elements of the new design are assembled in advance, so the installation process does not take more than 10 minutes. In total, the room is exposed to cold air for no more than half an hour.
2. Slider glazing, reviews of which say that the profile installed in winter was curved, most likely has the purpose of black PR. Inexperienced craftsmen explain this by saying that when entering a room from a cold warehouse, the plastic, under the influence of the temperature difference, twists, similar to wood. From a scientific point of view, the thermal conductivity of plastic is much less than that of wood, therefore it does not deform in any way. Naturally, this does not apply to high temperatures, for example, if you extinguish a cigarette on the profile or carelessly remove the protective film with a gas burner.
3. The installation is carried out poorly. This statement was invented by window sellers themselves so that buyers would not buy goods at discounts. When installing a window in winter, any shortcomings, especially those related to drafts, are immediately visible and immediately corrected.
4. The strangest of all is the opinion that polyurethane foam loses its properties. There are quite a few types of foam, some are designed specifically for work in winter. In addition, the main active ingredient of polyurethane foam has thermal conductivity close to zero, and therefore is in no way susceptible to low temperatures.

The operation of the glazing of sliders loggias and balconies depends 90 percent on the use of high-quality materials.

Conclusions when installing glazing of balconies and loggias with the sliders system in winter:

• special New Year discounts,
• reduction of product manufacturing time,
• great attention to installation in winter.

Advantages and disadvantages of the Sliders system, comparison with analogues

The Sliders sliding system is a good option for small apartments. Crescent locks, due to their security, allow this profile to be installed on the ground floor.

When producing the profile, only environmentally friendly materials are used, including polyvinyl chloride. It has the characteristics of lightness and strength. The sashes fit tightly to the window, due to which heat is retained in the room.

The design is complex, but it is easy to use. The tightness of the glazing prevents dust and extraneous sounds from entering the house.

There are double-glazed windows equipped with a special coating that reduces heat transfer. In sunny weather, this glass reflects light and keeps the room cool.

The advantages of the profile are as follows:

1. Can be used for any loggia or balcony.
2. The sashes do not freeze even in extreme cold.
3. Safety guarantee.
4. Equipped with a mosquito net on separate rails.
5. Combines with any interior, because it can be laminated.
6. Frees up additional space.

Many people prefer aluminum profiles, believing that they are more durable. But practice has shown that windows made of plastic, unlike aluminum, are characterized by better performance.

Many cases have been recorded in which aluminum sliding doors with similar design features fell out. This occurs due to the fact that in aluminum profiles the rollers on the sashes are adjustable. Sliding profiles Sliders (photo attached) have non-adjustable rollers, which prevents them from moving vertically and, accordingly, falling out.

The Sliders system is similar in design to the aluminum sliding system, but does not have the disadvantages of the latter: it is much warmer, stronger and more convenient to use. The pricing policy for these two profiles is the same. You can purchase a high-quality Slidors profile relatively inexpensively.

The aluminum profile is subject to deformation when exposed to low temperatures, while the PVC profile is resistant to various temperature changes.

On a sliding aluminum structure, the rail is located low, so when ice appears, the doors freeze and it is problematic to move them. If you use forceful movements when trying to open the sash, the seal may come off. This profile is unsafe for children.

The internal lock on aluminum profiles freezes in winter, blocking the structure. It also uses a single seal, which does not protect against drafts and moisture penetration inside. Having considered the pros and cons of aluminum and PVC profiles, we can conclude that plastic sliding structures have many more advantages.

Features of operating the Slidors system

This profile is easy to use; it can be used to easily glaze large areas and also provide regulation of the flow of fresh air into the room.

Durability is one of the main advantages of the Sliders profile. This system will serve and function well for 50 years or more, since components, fittings and mechanisms are protected from dust accumulation, and from the outside such contaminants can be removed quickly and easily.

The convenience of this sliding system also lies in the fact that the crescent-shaped lock with which it is equipped serves as a locking device and a handle for opening the door at the same time.

The profile fittings are not adjustable. This is due to the fact that preliminary precise marking does not impair the functioning of the fitting mechanisms even during long-term use. Therefore, there is no need for their maintenance.

The sash is secured by turning the locking device handle to the “closed” position.

Locks

The basic configuration includes a crescent-shaped lock Crescent 910 , which is installed on the doors located on different frame guides, providing protection against penetration into the room.

An alternative to the basic lock is a crescent lock with a key SZ-006, which ensures that the lock is locked with a key to prevent unwanted opening of the doors.

Additional features:

1. JackLoc window opening limiter.
2. A handle on the windows for convenient movement of the sashes.

JackLoc is a universal opening limiter that is best suited for sliding windows. Thanks to this lock, the opening level of the sash is adjusted, increasing safety indoors. Most often, such a lock is installed to protect children from opening the window too wide and possibly falling out of the window.

Profile installation features

Installation of the Slidors profile system is carried out in the same way as other window profiles. It needs to be installed by two people, as it will not be easy to cope with this task alone. You will need such improvised means as:

• screwdriver;
• drill;
• level;
• polyurethane foam.

Nevertheless, it is necessary to provide for all possible nuances.

The system can be installed at both positive and negative temperatures. But in frost conditions below -15°C, installation of the structure is prohibited. If the installation will be carried out in winter, then the structure must be stored indoors at a temperature no higher than +20°C, since in the cold the window may burst if this condition is not met. Therefore, it is recommended that the system be installed immediately after delivery.

Foam blowing is done after the entire structure is assembled and the locks are closed. If you do not adhere to these rules, the system may be led.

After completing the installation work, you should check the number of additional accessories. Security locks, seals, seals and covers on the doors are included in the kit. It is necessary to check their serviceability and functionality.

At the bottom of the doors there are 2 oval openings designed to drain water. You should check their availability.

1 section can support a block that weighs no more than 40 kg. Therefore, there are 2-4 rollers per sash based on the weight and width of the structure. You should ask the installers if all the rollers are present. Sliding windows Sliders differ from other systems. It lies in the fact that in Sliders it is impossible to adjust the rollers in height. In this regard, installers during installation should pay attention to the horizontal lines, leveling them if necessary. The parallelism of the vertical elements must be checked when closing for the first time.

To correctly carry out self-assembly, the instructions included with the profile must be thoroughly studied. The brief instructions include the following steps:

1. Checking the completeness of the package. The disassembled frames are packaged together with additional profiles, an aluminum rail for a mosquito net and connectors. The doors are packaged in pairs in protective film. Attached is a package with fittings and hardware intended for assembling frames. Completeness is checked by the number of profiles, sashes and additional elements. It is necessary to check the integrity of the glass and double-glazed windows and the conformity of their sizes.
2. To assemble the frame, remove the protective film from the frame profiles and connect them into one structure . There is an option for assembly “at the corners”: the frame profiles are fastened using corner connectors and self-tapping screws. Another option is “on a mill”: the side profiles of the frame are equipped with milling, where you need to attach the upper or lower profile and tighten it using self-tapping screws. It is best to seal the joint with silicone sealant.
3. The frame should be installed in the opening , leveled and secured. The fastening depends on the opening: it can be done using frame dowels or mounting plates. An important role in the choice of fastening is played by the material, the intended load, and the parapet (location). The configuration of the ebb and canopy may be different.
4. To install the sash , you need to position it with the rollers down, then insert its groove into the upper frame runner, and then into the lower one. First, installation is carried out on the outer runner, and then on the inner one. To check whether the sashes are functioning correctly, you should start moving them along the frame.
5. The next step is the installation of a crescent lock with a strike plate (if they were not installed at the time of production).
6. Filingpis (brush seals) are attached to the joints of the frames . To secure these elements, the sash should be pulled all the way to one side, and then to the other.
7. Now you need to drill the drainage holes . Their size should be 6-8 mm. They are made on the street side in the frame runner in the most suitable places so that the elements are not visible when viewed from the room. The number of these holes should not exceed 1 pc. for 1 linear m frame.
8. In those places where the sash lock and frame will come into contact, stoppers should be installed that will protect them from damage.
9. The protective film is removed from the profiles. Aluminum rails for the mosquito net are screwed to the frame, and then the net is mounted . Check the functionality of the element.
10. External flashings are installed , then the sashes . The joints are sealed, and the space between the opening and the frame is filled with polyurethane foam. After the foam has dried, it is cut off at the edges and decorative strips are installed.

After assembling and glazing the structure, it is not recommended to use the windows until the mounting foam has completely dried. They must remain closed for 24 hours.

At the initial stage, opening the windows and moving the mosquito net will require a little effort. This is normal and there is no need to worry about it. The brush seal will be crimped over time, and the sashes will move without much effort. The situation is similar with a crescent lock: at first it opens and closes with difficulty.

A problem may be indicated by the fact that the doors jam or move jerkily during movement. Proper installation guarantees that the structure will last at least half a century. To create a cozy atmosphere in the room, it is recommended to line the interior and seal the seams to prevent drafts and moisture penetration.

Care

The type of sliding glazing does not require special maintenance; double-glazed windows are washed 2-3 times a year with special products or the sashes are removed and rinsed in the shower. To do this you need to: raise the transom; apply oneself, lower oneself.

Fittings, roller guides, seals and locking elements are lubricated with oils or treated with sprays (without acids or resins). When soiled, the surface of PVC sashes is wiped with a damp cloth; if heavily soiled, they are moistened with a soap solution.

Installation of the structure involves delivery in disassembled form, which simplifies and speeds up the process. A sliding window system is suitable to increase the usable area of ​​the room. Main advantages: cost, service life up to 50 years, only environmentally friendly materials are used for production.

If you have any questions about which cold or warm glazing to choose, call for prices. Our company managers will answer your questions.

Customer reviews about Slidors

Nikita, 28 years old, St. Petersburg

Sliders plastic windows have become a godsend for my wife and me. I monitored many different companies involved in the installation of plastic windows, but settled on this one. And I didn’t regret my choice: these are high-quality profiles that are the best in all respects. And the price-quality ratio was pleasantly pleasing. I recommend it to anyone who wants to create a warm and cozy atmosphere on their balcony at any time of the year.

Marina, 38 years old, Nizhny Novgorod

I am pleased that I chose Slidors - a sliding system that occupies a leading position in the window niche. The window was installed quickly and efficiently, and what a space saver it turns out to be! There is space for wardrobes. The double-glazed window retains heat well and does not allow outside noise to pass through. Wood-laminated plastic goes well with the color of the furniture. Beautiful, practical, reasonable price, warm glazing lasts for many years and does not require repairs. I recommend.

Natalya, 46 years old, Krasnoyarsk

Based on numerous positive reviews, I decided to contact this company for the installation of double-glazed windows for the loggia. They produce sliding plastic windows Slidors, and they also install them. The installers took their work responsibly, did everything quickly, and cleaned up construction waste after themselves. The appearance of the windows is beautiful, and the sashes slide smoothly on the rails. I didn't find any problems, everything was in good condition. The constructive solution of Sliders allowed us to enjoy the comfort of our own home. I can recommend it.

Vasily, 54 years old, Novosibirsk

For a long time, my wife and I dreamed of making a warm loggia and placing storage cabinets in it (we have a lot of them). We chose Sliders because we needed a sliding system to save space (hinged windows take up a lot of space and are inconvenient to open). Now in the loggia there are voluminous cabinets in which all the pickles are placed. However, they do not interfere with the opening of windows. Comfortable, warm and functional.

Margarita, 48 years old, Rostov-on-Don

I ordered Slidors semi-warm sliding glazing for the balcony, which saved my budget. We don’t use the balcony during the cold season, so this option suited us. In the summer I open the windows wide and put my favorite flowers out there. Fresh air easily enters the apartment, and the mosquito net protects against mosquitoes. This profile prevents moisture, dirt and cold from entering the apartment.

mosquito net

The window mosquito net installed on Slidors plastic windows can be either “original” or standard aluminum.

The “native” mosquito net can only be installed on the SF-070 Slidors window profile. Since it has an additional runner on which the mesh is placed. This allows you to move the mesh along the entire length of the guide depending on the width of the window.

Standard aluminum mosquito net - installed independently of the Slidors frame profile. It requires additional holes for fastening, which can negatively affect the service life of your windows due to dirt getting into the openings, and such a mesh will not move.