How to install a roof window: instructions, tips, tricks

Any problems with roof windows in Moscow will be corrected by specialists. We will help not only with repairs, but also with modernization of structures installed on the roof. After repairing the roof windows, we will check their insulation capabilities (heat and moisture resistance), as well as the degree of protection from street noise. We will provide a guarantee of up to 1.5 years on materials and work performed.

It only takes 10 minutes for our craftsmen to accept the application and go to the client’s address to repair the attic window. The technical equipment of each specialist will allow us to perform on site:

• replacement of broken/worn fittings or double-glazed windows of a roof window;
• dismantling the old insulation and installing a new one;
• renew the sealant layer;
• eliminate sagging of the movable window sash.

An on-site technician will be able to disassemble the structure, upgrade the profile, or install security locks on the sash and handle.

Why us?

Experience 15 years

Own production

24 hours a day

The visit of the master is free!

Repairing roof windows is not an easy task and requires certain skills and experience. The specialists of our company will be able to carry out work on replacing a roof window, its repair and installation. Our qualified technician will quickly determine the cause of the structure failure and eliminate all problems.

Frequent malfunctions of roof windows

Improper use of windows, violation of installation technology or natural wear and tear of mechanisms will cause breakdowns. To properly solve this problem you will need the help of a specialist. We strongly discourage clients from trying to correct the situation on their own. In such cases, you will only aggravate the breakdown and increase the cost of repairs.

• Blowing. Drafts are a sign of a skewed frame or problems with the tight sash on the window. To fix such a breakdown, you do not need to climb out onto the roof. All work will be carried out from the inside.
• Leakage. The problem may be a skewed, sagging sash or a worn seal. In such cases, the window is repaired without access to the roof. Sometimes it is necessary to restore the roof covering around the opening. Then window repairs are carried out in conjunction with exterior work.
• Damage to the glass unit. Broken or cracked glass must be replaced. Then the window will function normally and protect from cold, moisture, and noise.
• Breakage/wear of fittings. Even with an excellent appearance, the window sash may close poorly, which causes discomfort. Often the reason lies in a broken handle, sagging hinges, or worn eccentrics. Such problems can be solved by repairing or replacing fittings.

!

Our specialists will professionally replace double-glazed windows, profiles, and modernize structures built into the roof. Your window will be insulated, equipped with a mosquito net, and equipped with automation.

Prices

Features of Velux windows

VELUX was founded in Denmark in the 1940s and has been operating in the Russian market since 1991. It produces roof windows made of wood and plastic.

The basic package includes an air exchange valve for ventilation. The profile has various sizes and shapes. Convenient top and bottom opening of window systems. Shooting washable ventilation system filter.

The windows have high heat-saving properties, are frost-resistant, and reduce heat loss. The rubber seal prevents the profile from blowing out and freezing. Durable tempered glass can withstand any natural disaster.

The window system is made of high-quality laminated pine wood, which is coated with acrylic varnish. The covers are made of aluminum, the dividing frame is made of stainless steel.

Number of chambers in a Velux wooden profile:

• single- and double-chamber (WoodLine GZR 3050/3050B standard, WoodLine GZR 3061/3061B standard);
• two-chamber (classic WoodLine GGL, WoodLine GLL).

The windows are made in classic European design. They have a technologically advanced system for fastening linings and hidden installation of electrics.

Selection of opening options (handle top/bottom):

• handle on top and bottom (GZR 3050/3050B, GZR 3061/3061B);
• top handle (GGL, GLL 1061);
• bottom handle (GPL/GPU).

Our advantages

has been on the services market for more than a decade. Each specialist working there has extensive experience and will be able to quickly and efficiently fix any problem with your window design.

Our main advantages:

• guarantee for all types of work;
• low cost of maintenance and repair;
• efficiency of work execution;
• high qualification of each master.

What windows do we work with?

Our specialists know how windows from well-known manufacturers Roto, Fakro, Velux are constructed. In practice, we are familiar with other brands. Therefore, they will be able to quickly and correctly adjust mid-motor mechanisms and frames with a raised axle.

After the repair is completed, there will be no blowing from the frame, drafts and problems with condensation will disappear. The sash will begin to close easily, the problem with distortion and geometry violation will be solved. Thanks to original components or factory analogues, the master will be able to quickly select a new handle, replace a worn eccentric, comb, or other element.

Prices for repairing wooden windows Fakro

Cost of adjusting Fakro wooden windows

Prices for installing window sills in Fakro windows

The cost of insulating wooden windows Fakro

Prices for replacing glass and double-glazed windows of Fakro wooden windows

Cost of installation of Fakro window slopes

Installation of slopes on Fakro windows

Cost of replacement and repair of Fakro window fittings

Prices for installation work

Prices for sills and visors for Fakro windows

The indicated price includes delivery and installation of the product.

The prices indicated above are not a public offer. There are no exact prices that determine the fixed cost of repair work. The price directly depends on the labor intensity and complexity of the work, as well as the risk of damage to the window. The final price is determined after a specialist examines all existing damage, diagnoses them and determines the total scope of work to be done.

However, it is worth understanding that performing even very complex window repairs will significantly save your budget, since repair work will cost significantly less than new windows.

Roto skylights for replacing old skylights in custom sizes

MR series windows are suitable for replacing old skylights regardless of manufacturer, year of manufacture and size

Quick and hassle-free replacement of an existing old roof window - regardless of its manufacturer, size or year of manufacture. The MR series windows are suitable for every situation and every time - they are made to order with millimeter precision according to your requirements. A roof window can be quickly and easily inserted into an existing roof opening without any complex repair work.

Roto Designo R8 MR roof window

PVC frame, two axes of rotation, manual control - handle on the bottom

For replacing old skylights regardless of manufacturer, year and size

• Fast installation thanks to extensive pre-assembly from the factory: WD thermoblock, vapor barrier film and mounting brackets as standard.
• Replacement within a few hours: replace the old window in the morning, enjoy the new window in the afternoon.
• Adjustable fittings allow you to eliminate gaps and distortions without dismantling the window.
• Limitless possibilities and panoramic views from the window: we offer windows up to 1.80 m long.
• Multi-chamber profile made of 100% PVC with steel reinforcement: more reliability and energy efficiency.
• Maximum comfort and freedom: two axes of rotation of the sash; in the open position, the window sash does not extend into the room.
• Stable and automatic locking of the sash in the washing position, which provides safe and convenient access to the outer glass.
• More warmth: high-performance double glazing and innovative energy-saving solutions up to Passive House level in triple glazed windows.
• More security: four-point central locking system. 5th highest safety class.
• TÜV Rheinland certificate (RotoQ and Roto Designo R8 series windows) is a guarantee of product quality and safety.
• Quadro version - "Kurt" assistant - crane and carrying strap as standard for easy transport and easy handling on site.

Roto Designo R6 MR roof window

PVC frame, central pivot axis, manual control - handle on the bottom

For replacing old skylights regardless of manufacturer, year and size

• Fast installation thanks to extensive pre-assembly from the factory: WD thermoblock, vapor barrier film and mounting brackets as standard.
• Replacement within a few hours: replace the old window in the morning, enjoy the new window in the afternoon.
• Adjustable fittings allow you to eliminate gaps and distortions without dismantling the window.
• Classic design and time-tested central axis opening technology.
• Stable manual locking of the sash in the washing position, which provides safe and convenient access to the outer glass.
• Multi-chamber profile made of 100% PVC with steel reinforcement: more reliability and energy efficiency.
• The optimal window for attic ventilation thanks to the central axis of rotation of the sash.
• More warmth: high-performance double glazing and innovative energy-saving solutions up to Passive House level in triple glazed windows.
• More security: four-point central locking system. 5th highest safety class (PVC).
• Quadro version - "Kurt" assistant - crane and carrying strap as standard for easy transport and easy handling on site.

Roof window Roto Designo R6 MR RotoTronic

PVC frame, central steering axis, electric control

For replacing old skylights regardless of manufacturer, year and size

• Fast installation thanks to extensive pre-assembly from the factory: WD thermoblock, vapor barrier film and mounting brackets as standard.
• Replacement within a few hours: replace the old window in the morning, enjoy the new window in the afternoon.
• Adjustable fittings allow you to eliminate gaps and distortions without dismantling the window.
• Classic design and modern automation technology: the window closes automatically when it rains.
• Stable manual locking of the sash in the washing position, which provides safe and convenient access to the outer glass.
• Multi-chamber profile made of 100% PVC with steel reinforcement: more reliability and energy efficiency.
• The optimal window for attic ventilation thanks to the central axis of rotation of the sash.
• More warmth: high-performance double glazing and innovative energy-saving solutions up to Passive House level in triple glazed windows.
• More security: four-point central locking system. 5th highest safety class (PVC).
• Quadro version - "Kurt" assistant - crane and carrying strap as standard for easy transport and easy handling on site.
• Integrates with the Smart Home system.

To order a custom-sized replacement window, you will need to tell us the exact geometric dimensions of the existing roof opening (width x length) as shown in the picture below. Call a surveyor or contact our technical specialist: 8-800-600-46-38 (free call from the territory of the Russian Federation).

Window width measuring point

Window length measuring point

Repair and installation of a roof window

The product is more susceptible to negative external influences and mechanical damage than usual. In most cases, owners change their profile, which significantly affects the family budget. A competent technician will determine the extent of the damage and offer repair options, which will save money and time.

Even if the structure is severely deformed, there is no need to install a new window in the attic roof. The specialist will also recommend a system for protecting against repeated deformation.

Repair and maintenance of profiles is available inexpensively today. The main types of repair work include:

• Replacement and adjustment of fittings;
• Installation of new insulation to maintain the required level of sound insulation and heat;
• Sealing;
• Replacement of double-glazed windows;
• Additional insulation.

In addition, work is being carried out to install protective systems, modernize the profile, and a complete disassembly of the structure is possible.

Installation of a window on an attic roof includes several stages: calculation and creation of a project, preparation of the opening, installation of the frame, waterproofing, and fixation of the flashing. All steps must be performed sequentially and followed. After choosing the product and its size, you need to mark the location of the profile.

Install waterproofing on the sheathing, then a waterproofing apron. After this, the required coverage area is taken based on measurements. Tiles are a specific material; it is recommended to plan the installation of the profile during construction.

The frame and glass unit are removed during installation of the box. After adjusting the brackets, install the frame, check the fit and tighten the fasteners. The flashing is installed in two stages, first the lower apron, then the upper part of the part. Finally, the sash is installed.

Features of dormer windows

Due to the specific layout, roof windows are installed at an angle, as a result of which they are susceptible to strong exposure to the sun, wind, rain, and snow. It is very important to choose for installation high-quality frames with high-strength double-glazed windows, the quality of which meets international standards, and, as soon as necessary, eliminate deformations by taking advantage of the offer.

We provide window repair services in Moscow, using only durable materials. Our specialists will quickly determine the nature of the damage, agree with the customer on the necessary measures to eliminate the problem and, in the shortest possible time, restore the functionality and attractive appearance of the frames or sashes. The most common cause of leaks and drafts is improper window installation, so it is not possible to correct the situation without professional help.

Features of operation in winter

Window leakage and condensation formation can be a consequence not only of improper installation, but also of violation of the operating instructions. If the room is heated, the inclined design of the window facilitates the rapid sliding of melted snow. However, to avoid problems, you should strictly adhere to some rules:

• moisture can damage wooden structures, so if condensation does form, thoroughly wipe off the water;
• if there is no battery under the window, install any other heating device there;
• take care of the presence of both natural and forced ventilation; through special ventilation ducts, moist “exhaust” air will be removed from the room and there may be no condensation at all;
• sometimes, despite all the precautions, frost and ice accumulation still form on the glass; they can be removed with a telescopic mop that has a special attachment for washing windows and removing dirt;
• The ideal option would be more expensive window models equipped with special heating; condensation will definitely not form on them.

By the way, from clean windows that are free of dust and dirt, melted snow will slide off more efficiently, so at least 2 times a year, in heated houses - once, wash the windows using the same telescopic mop.

The use of outdoor cable roof heating can also help deal with ice. In this case, snow will not accumulate around the window, there will be no ice or icicles on the window overhangs, or in the ventilation ducts.