How to properly prepare Ivaper windows for winter with your own hands

Do you need help preparing Ivaper windows and doors for winter in St. Petersburg (St. Petersburg) and the Leningrad Region?

Call! +7(812)904-30-42 — We’ll help!

We guarantee a prompt approach, high quality work and affordable prices!

While enjoying our new windows, we often don’t think about the fact that Ivaper windows also need care and preparation of the windows for winter. Yes, of course, much less care than for wooden ones, but still needed. The design of Ivaper windows requires regular (every six months) cleaning of accumulated dirt, lubricating and adjusting the fittings. The question of preparing Ivaper windows for winter arises with the onset of cold weather, but a prudent owner will think about how to adjust Ivaper windows for the winter much earlier. After all, prepare the sleigh in the summer and the cart in the winter. Proper preparation of Ivaper windows for winter is not difficult, but it is very important and you can most likely handle it yourself. And if you prefer that we do it, we will be happy to help you! Just call and the specialist will prepare your Ivaper windows for winter professionally.

So how to properly prepare Ivaper windows for winter yourself?

First, think about what bothered you last winter? How are things going with Ivaper windows now? Do they open well? Were there any puddles on the windowsill during heavy rain? How does the window handle turn? With or without effort? As expected, does the handle go all the way down? Or not? As they say: cleanliness is the key to health! In our case, regular removal of accumulated dirt and lubrication, plus timely adjustment (adjustment) of the windows, significantly increases the service life of the Ivaper window mechanisms. The question arises: how to properly wash an Ivaper window so that it does not get damaged? You can safely wash the Ivaper window with ordinary soapy water and a soft sponge. We soap the glass (glazed unit), Ivaper window profile (ivaper), slopes, window sill, and then wipe it dry with a soft cloth. Check the drainage channels (they are at the bottom of the window frame), maybe they need to be cleaned? It is also important to know how to adjust Ivaper windows, but more on that below.

Advantages of PVC windows Ivaper

Such windows have a number of technological features that are not typical for other windows of a similar design and they are as follows:

1. Thanks to the optimal width of the ivaper profile, windows based on it provide the most durable thermal insulation possible in all weather conditions. This became possible thanks to the thoughtfulness of all three PVC profile chambers.
2. The wide flange that uses the ivaper profile allows you to install double-glazed windows up to 33 mm wide on windows, which increases the reliability of the window.
3. The steel reinforcement used in the profile makes it stable and functional even when using large sash sizes, and the special sealing system used in metal-plastic windows allows us to guarantee reliable and long-term protection even in conditions of the heaviest rain and wind.
4. The nobility of a window in which the ivaper profile is used is given by the smooth surface of the profile itself, and the original color is preserved for many years thanks to the use of a special formula in the manufacture of raw materials for the profile, making such windows practical and attractive for any interior.
5. The smooth lines of the window and its external simplicity allow it to be washed without the use of special products, because there is simply nowhere for dirt to get clogged, and therefore wiping such windows is a pleasure.
6. The window is securely attached to the frame with self-tapping screws using special hinges, this guarantees long-term and, most importantly, uninterrupted operation of the window, and a special tight-fitting glazing bead securely secures the glass unit in the profile frame, in addition, this glazing bead can be selected to order.

Checking the tightness of an Ivaper window (how to check where the air is blowing from an Ivaper window?)

If in summer the problem of blowing through Ivaper windows worries us little, then in winter we don’t want to freeze at home. So, three ways to detect a blowing Ivaper window. We check the windows for blowing, look for where the air is blowing from the Ivaper window.

The first way to check the tightness of an Ivaper window : using a sheet of paper, half an A4 is quite enough. We open the window sash slightly and expose half of the sheet to the street, close the sash, and lower the handle all the way down. Important! The sheet of paper should not fall on the locks that are installed on the window frame, otherwise it will simply be bitten and the experiment will be carried out incorrectly. We pull out the sheet. Three options: the sheet flies out with a whistle, the sheet comes out with difficulty, it feels like the sheet is about to tear. Important! Thus, the entire perimeter of the window sash is checked. If in most places of such a check the sheet comes out freely (flies out with a whistle), the seal needs to be replaced. If the sheet comes out with difficulty in most places of inspection, the problem of window tightness can be solved by adjusting and lubricating the window. If the sheet is about to tear in most places of inspection, you do not need to do anything with the Ivaper window. Ivaper will not blow on you from this window!

The second way to check the tightness of an Ivaper window : using a soap solution. Do you remember how you were looking for a hole in a bicycle tube?))) We make a soap solution. Apply Ivaper around the perimeter of the window. Where the bubbles appear is where it blows.

The third way to check the tightness of an Ivaper window : using a candle flame. Carefully move a burning candle around the perimeter of the window. Where the flame fluctuates, from there it blows from the Ivaper window.

Cleaning dirt and lubricating Ivaper window fittings

Start insulating your windows for the winter by inspecting the Ivaper window fittings. Remove dirt, especially from the top of the window sash. All folds must be cleaned of deposits and dirt, especially cement and plaster residues. Direct exposure of the fittings to moisture and contact with cleaning agents should be avoided. Then lubricate the window fittings with Ivaper. Lubrication points for the Ivaper window are marked with special markings. How to lubricate an Ivaper window? The most common ones are WD-40, machine oil, grease. Do not under any circumstances lubricate with sunflower oil or olive oil or anything else! Edible oils dry quickly into a sticky substance that will break the Ivaper window mechanism. After this, rotate the fittings in different modes several times to distribute the lubricant. Wipe off excess oil from the Ivaper window.

Wide profile system GEALAN S 8000 IQ plus

The S 8000 IQ plus system with an installation width of 83 mm is another interesting innovative solution. With its 6 chambers, this profile, which has increased heat transfer resistance, helps reduce CO2 emissions into the atmosphere. The mounting profile width of 83 mm ensures increased strength of welded corner joints. A powerful steel reinforcement guarantees the stability of structures and allows you to securely fasten the fittings, which ultimately increases the resistance of the window unit to burglary.

Variety of options

The new frame of the S 8000 IQ plus system can be combined well with the sash of the S 8000 IQ system. The manufacturer has a large choice between doors with four, five, six or seven chambers. Moreover, due to the compatibility of these systems, there is no need for additional processing and the product from profiles of different installation widths can be manufactured in one production process.

Exclusivity:

• Solid high quality frame
• High mechanical strength

Protection:

• Six chambers provide high heat and sound insulation
• Reliable burglary protection

Design:

• Curves pleasing to the eye
• Narrow visible part of the profile

Variety of options:

• Wide range of combinations thanks to the compatibility of this system with the S 8000 IQ system

Methods for adjusting the pressure of the Ivaper window sash to the frame

There are many manufacturers of window fittings, and each of them has its own way of adjusting the pressure of the window sash, but there are also some general principles on how to tighten Ivaper windows. Open the window sash. At the end of the sash, find the eccentric pins. Most often they can be adjusted using a hex or star wrench. Usually, there is a mark on the trunnion - a small strip. By default, it is set up - neutral position. By turning the trunnions to the left or right, you can strengthen or weaken the pressure of the window sash to the frame, i.e. change the winter-summer mode yourself.

Profile IVAPER 70 (Ivaper 70)

The IVAPER 70 system is a proprietary development of Russian technologists. The plastic from which the 5-chamber profiles are made can withstand frost down to -55 °C. The heat-saving properties of this system allow it to be used in regions with moderately cold winters. The thickness of the external walls and internal lintels, corresponding to class “A”, allows them to be used for glazing the upper floors. Ivaper 70 windows, reinforced with steel liners, can withstand increased wind loads. The installation depth of frost-resistant profiles is 70 mm, which increases not only energy efficiency, but also the level of noise absorption of models in this series.

Adjusting the Ivaper window sash (ivaper) vertically and horizontally

A shift in the window sash or a slight bevel can be removed by horizontal adjustment. The position of the window sash is adjusted using the upper and lower fastening loops. This can usually be done using a hex wrench. The adjusting screw in the bottom hinge allows you to adjust the window sash from the outside and inside. If you turn the key to the right, the Ivaper window sash rises. If you turn it to the left, the angle of the window sash lowers. Also, the top hinge is adjusted when the window sash is open. You need to move the window sash back and forth no more than 2 mm. If the Ivaper window does not close tightly from the bottom, then you need to adjust the bottom hinge. If you need to press or move the window sash towards (away from) the lower hinge, then adjust the position of the sash with the Ivaper window open. There is a second adjustment screw on the bottom hinge to lower and raise the sash vertically. If you turn it clockwise, the Ivaper window sash will rise. If it's counterclockwise, it will go down.

Comparative table of parameters of IVAPER systems

Theoretically, windows assembled from any Ivaper profiles are suitable for use in regions with moderately cold winters.
That is, in the climatic conditions of the Central Federal District. However, it was not for nothing that technologists developed 4 types of systems with different installation depths and numbers of cameras. Differences in the thermal characteristics of domestically produced profiles make it possible to successfully solve a wide range of construction problems. For example, the IVAPER 62 series is unlikely to be suitable for glazing openings with a large area in a private residential building. To reduce heat loss to an acceptable level, in such cases it is recommended to use Ivaper systems with a width of 74 mm or 82 mm. But when glazing balconies, loggias, entrance lobbies, workshops or warehouses, you can safely order windows assembled from 3-chamber systems with an installation depth of 62 mm.

The most heat is lost through light openings if the windows are made without the use of selective or 2-chamber double-glazed windows. At the same time, the energy efficiency of the profiles themselves cannot be ignored either. They are part of the overall heat saving system, since they prevent the penetration of cold not only from the street, but also from walls that have cooled down in winter.

The energy efficiency of profiles without steel liners is 5-10% higher than that of systems with reinforcement. This is due to the fact that metal is a good heat conductor. However, it is impossible to sacrifice additional reinforcement of structures, since in this case in winter the frames and sashes are deformed, which leads to the windows blowing out and a rapid decrease in the temperature in the rooms.

Sealant for windows Ivaper (ivaper)

The most popular window seals: Rehau, KBE, Shlegel Q-Lon

In most window designs, two perimeter seals are installed. The first sealing circuit is installed on the window frame - the frame seal. The second contour of the seal is placed on the window sash - the narthex seal. Premium windows have three perimeter seals.

What kind of sealant for Ivaper windows is there?

Tips on how to choose a seal for windows Ivaper (ivaper)

Open the Ivaper window. Use a damp cloth to clean the seal from visible dirt. Examine it carefully. On all contours, the seal must be elastic, without visible cracks or tears, and lie flat in the groove without any bumps. Pay attention to the corners. If everything is in order, then lubricate it with silicone grease. If not, then the Ivaper window seal needs to be replaced. Otherwise, in winter, Ivaper will blow from this window.

PVC window profile Ivaper 74

IVAPER 74 profiles are windows for those who value style, comfort and exclusivity: modern design, advanced technology, stable shape.

The IVAPER 74 profile system meets all the requirements of a high-tech PVC profile. Thanks to the multi-chamber internal structure of the profile with reinforced walls, excellent thermal insulation and stability of the window are ensured. The snow-white surface, streamlined contours and narrow visible height of the frame and sashes give the profile design a special elegance.

The IVAPER 74 window system belongs to class A and is produced in a 5-chamber design. With an installation width of 74 mm and optimal geometry of the internal chambers, this model meets the highest requirements for sound insulation, heat conservation and safety for class 1 profiles. The presence of a double sealing circuit reliably protects the room from dust and noise, and a thoughtful design makes the seals almost invisible.

The IVAPER 74 profile uses a special rebate width, which allows the installation of modern double-glazed windows up to 44 mm wide. At the same time, due to the tight fit of the bead, a stable position of the double-glazed window is ensured, which guarantees good tightness of the window structure. In addition, you can independently choose the color and design of the glazing bead according to your taste.

Sealing the seams of an Ivaper window with thermal insulation materials

In case of improper installation, sealing the seams with thermal insulation materials may be the only solution. Sealing installation seams and joints with special heat-insulating materials is one of the most effective ways to insulate Ivaper windows.

How can I seal the street seams of an Ivaper window?

- polyurethane foam, which must be plastered or covered with strips

- mineral wool, which must be covered with strips

- polystyrene foam, which must be covered with strips

— liquid rubber (STIZ)

How can I seal the internal joining seams of an Ivaper window?

- silicone sealant

- acrylic sealant

— cosmofen (liquid plastic)

The described problems with Ivaper windows can appear due to poor-quality installation of a metal-plastic structure or during a long service life - longer than 10 years. During installation, installers had to familiarize themselves with the design properties of Ivaper windows and teach owners how to use Ivaper windows.

The end of summer, the beginning of autumn is the time to prepare Ivaper windows for winter. If you take care of insulating Ivaper windows in advance, you will definitely not freeze at home in winter!

IVAPER profile systems

The manufacturer offers customers a choice of 4 systems with different thermal characteristics.
The improved composition of the plastic used for extrusion has made it possible to extend the service life of IVAPER windows to 40-60 years. These systems are suitable for the production of rectangular, round, arched or trapezoidal structures. They are compatible with fittings that provide swing, tilt, lift and turn-tilt opening of active sashes. Ivaper systems have a perfect snow-white color without the slightest hint of shades of gray or yellowness. This proves the high quality of raw materials used for profile extrusion. If customers need colored windows, the manufacturer offers a service of single- or double-sided lamination with RENOLIT color films. Buyers have the opportunity to choose the appropriate decor from several dozen options. Multilayer RENOLIT films are protected from fading and prevent PVC profiles from overheating in the sun.

Frequently asked questions about preparing Ivaper windows for winter

We have collected here the most popular questions about preparing Ivaper windows for winter; we recommend that you read the answers.

Question No. 1

Preparing Ivaper windows for winter

How to prepare Ivaper windows for winter?

Answer:

Preparing Ivaper windows for winter consists of: cleaning plastic windows from dirt, lubricating plastic window fittings and seals, adjusting plastic windows, switching plastic windows to winter mode (adjusting the Ivaper window sash pressure), replacing the Ivaper window seal ( ivaper), if necessary. Call and get an Ivaper window repair specialist in St. Petersburg (St. Petersburg) and the Leningrad Region and he will prepare your Ivaper windows for winter.

Question No. 2

Adjusting Ivaper windows for winter

Do Ivaper windows need to be adjusted for winter?

Answer:

Hardware manufacturers recommend adjusting Ivaper windows twice a year.

Question #3

Adjusting Ivaper windows (ivaper) winter-summer

Is it necessary to set the winter-summer mode on Ivaper windows?

Answer:

A normally adjusted plastic window does not need to be switched from winter to summer. There is no winter-summer mode, this is a marketing ploy. The winter-summer mode means pressing the window sash to the frame. A stronger pressure is “winter mode”, a weaker pressure is “summer mode”.

Question #4

How much does it cost to prepare Ivaper windows for winter in St. Petersburg (St. Petersburg) and the Leningrad Region?

The cost of preparing Ivaper windows for winter?

Answer:

The cost of preparing Ivaper windows for winter (adjustment and lubrication) of a window sash is 600 rubles per sash.

Question #5

Do you provide a guarantee for work on preparing Ivaper windows for winter in St. Petersburg (St. Petersburg)?

What is your guarantee for winterizing Ivaper windows?

Answer:

Yes, we guarantee our work. Work on preparing Ivaper windows for winter is guaranteed for one year.

Wide profile system GEALAN S 7000 IQ plus

The frame with an installation width of 83 mm has significant advantages. Everything you need for a high-quality profile is here. First of all, these are six chambers that provide high resistance to heat transfer and protect against noise. The S 7000 system itself, with internal sealing, achieves a reduced heat transfer resistance of 0.83 m²x°C/W. The use of the in-depth S 7000 IQ plus system in combination with new energy-saving glass solutions will further improve these figures. Due to the installation width of 83 mm, a significant increase in the strength of the weld is achieved, which ultimately has a positive effect on the mechanical strength and stability of the entire window structure as a whole. The powerful steel reinforcements used for the S 7000 IQ plus system guarantee the stability of PVC profiles and the reliability of the fastening of window or door fittings, which can significantly increase the resistance of the window or door structure to burglary.

Excellent profile system design

In addition to the technical characteristics, the profiles of the S 7000 IQ system are distinguished by their modern design. Wide curves, with a relatively narrow visible part of the profile, subject to the choice of various sash configurations, will allow you to design an elegant window in a classic style.

Exclusivity:

• First class profile system
• Excellent technical characteristics and combined with excellent appearance
• High mechanical strength

Protection:

• The presence of six chambers provides increased reduced heat transfer resistance and excellent sound insulation
• Reliable burglary protection

Design:

• Classic design with curves that blends harmoniously with modern architecture
• Fits perfectly into the architectural ensemble of your building or neighborhood

Variety of options:

• The frame of the S 7000 IQ plus system can be combined with the sash of the S 7000 IQ system. In this case, no additional tools are required to manufacture the window. In one production process it is possible to produce windows from profiles of different installation widths.

Prices for preparing Ivaper windows for winter and other types of window repair work

Make your own calculation of the cost of repair and maintenance of windows and doors

Ivaper profile models

The company launched three models on the market: Ivaper 62, Ivaper 70, Ivaper 74, where the number indicates the thickness of the profile. The first profile “Ivaper” is an analogue of Gealan S 3000. The third is S 8000. “Ivaper 70” is an independent development.

Let's take a look at the technical characteristics of all brands :

Ivaper 62

These metal-plastic windows are recommended for new buildings and reconstructed buildings - this is quite logical. But it is not clear why manufacturers recommend them for cold regions. The heat transfer resistance of Ivaper 62 is only second class - 0.77 m2 C/W. And there are only 3 cameras in the profile.

But the design possibilities of such a window are pleasing. It can be white, covered with a colored film or a special super-resistant acrylcolor coating. It is also possible to order arched windows - the ivaper 62 profile bends well.

Are you planning to renovate your balcony? On our website you will find many articles on this topic. For example, read about choosing and installing railings. In the article about installing a floor on a balcony, we describe how to lay wooden joists, tiles and other types of floors.

How to paint a balcony or loggia? And what does the choice of paint depend on? Answers at: https://oknanagoda.com/balkony-lodzhii/remont-otdelka/kak-pokrasit-balkon.html

Ivaper 70

70s ivaper – windows and doors with five chambers. The heat transfer resistance is as much as 90 m2 C/W! This is a fantastic indicator even for plastic windows. It is possible to install a three-chamber double-glazed window with a width of 40 mm. It can be regular, soundproof or anti-burglary depending on what you want to get.

This profile is often made in large sizes. The weight and strength characteristics allow.

Ivaper 74

The model is even better than the previous one. There are four and five chambers. The maximum width of the glass unit is 44 mm. Glass and design may also be different.