How to wash curtains with eyelets in the washing machine so you don’t have to buy new ones?

Practical advice

Depending on the type of eyelets, the following must be considered:

• Eyelets made of wood deteriorate under the influence of water. Such products must be washed by hand, without lowering the upper edge where the fittings are located into water;
• Metal eyelets also do not tolerate water, which can quickly cause them to become rusty. It is better to minimize contact with water;
• eyelets made of plastic are more practical than those made of other materials, but if the plastic is of poor quality and there is paint on it, it may come off from water.

Note that:

• Curtains should be washed separately from other linen and items.
• Washing powder may leave white stains on the fabric; it is better to use a gentle product, such as shampoo or shower gel.
• If there are snags or holes in the material, or if the fittings jump out of the straps, then the curtains will be damaged when washed in the machine.
• If the product is made to order, then you need to immediately ask the tailor about the rules for caring for the material, because there will be no standard tag on the product.
• When washing mechanically, the drum of the washing machine must be designed to hold a lot of weight so that the curtains rotate freely.
• After washing, you need to immediately remove them from the machine drum so that the rings do not oxidize.
• Curtains with dirty stains should be soaked in soapy water before washing; substances with chlorine should not be used; if necessary, it is better to use a more gentle stain remover.
• If you don’t know what material you are dealing with, it is better to use dry cleaning services.
• If curtains made of threads do not have decorative beads and rhinestones, they can be machine washed on automatic mode, having previously been tied with knots.
• You don’t have to bother with washing and ironing, but clean it using a steam cleaner.

How to care for such curtains

First of all, you need to properly remove the curtains from the curtain rod. To do this, you should very carefully remove the loops from the hooks, as there is a possibility of damage to the fabric. In the warm season, you should give preference to thin materials, and in the cold months, use heavy curtains that have a dark color.

How to remove dirt from products using a machine:

• Dust that accumulates in the fabric during use of the products can significantly spoil their appearance and make the curtains dull. Also, accumulations of dust can cause harm to the health of people who live in the apartment;
• In order for the curtains not to lose their original shapes and colors, they need to be properly cared for - washed and ironed using the correct technology;
• It is necessary to choose the correct temperature for ironing based on what material was used to sew the curtains;
• Before you start washing, you should determine the type of fabric;
• It is prohibited to wash items made from different fabrics together. Especially if one curtain is made of natural, and the other of artificial;
• During washing, there is a possibility of damage to products that have a softer structure. Therefore, in order to thoroughly clean the curtains, they need to be sorted not only by type of fabric, but also by weight.

If the curtains are very heavy, they cannot be washed using a machine. Such products must be dry cleaned. You can also wash them by hand

But it is important to remember that this method is quite difficult. After all, it is necessary not only to remove all existing contaminants, but also not to spoil the material

When starting the process, you need to shake out the products to remove dust from them. You also need to soak them, changing the solution several times.

Home washing

Read the information on the tag, determine the type of material. If the manufacturer allows you to use a washing machine, select the appropriate wash cycle. The curtains are placed in a protective washing bag; if you don’t have one, you can use a pillowcase.

For hand washing, the detergent is diluted in water at 40 degrees. Bulk products are best placed in the bath. They are left to soak for a couple of hours, then thoroughly rinsed in fresh water several times. During the washing process, there is no need to bother with friction and twisting of the fabric.

How to wash thread curtains?

Before washing the thread curtains that are fashionable today, tie individual groups of threads with a weak knot, saving yourself from subsequent unraveling. Then place the curtains in a special laundry bag. Synthetic material easily releases dust and dirt, so it can only be washed for a short time on a gentle cycle. Spinning is not contraindicated. Then hang the damp curtains on the curtain rod and let them dry. Under the weight of their own weight, they will straighten out and acquire their original appearance.

Drying

Curtains with eyelets should be dried naturally. After wrung out a little, the curtains are hung out to dry; under the mass of absorbed water they will straighten themselves, which will make the ironing process easier or even eliminate the use of an iron. When drying, it is better to avoid direct sunlight, as ultraviolet rays can disturb the texture of the fabric and it will change its appearance. You can iron them when they are completely dry.

Some fabrics need to be dried in a horizontal position, for example, velvet, otherwise it will stretch, this rule applies to any stretchy or heavy material.

Pros and cons of using grommets

All types of curtains have their pros and cons, curtains with eyelets are no exception. Let's look at the benefits first:

• They can be opened and closed without problems.
• The overall appearance looks original.
• Long service life. The element is least susceptible to wear.
• For curtains with grommets, any interior style is suitable.
• Installation on the eaves is easy.

As we have seen, this interior element is practical. As for the shortcomings, only one can be highlighted. If you want to carry out tailoring yourself, then for this you need to have certain knowledge, skills and experience.

Washing rules for different types of fabrics

Curtains and curtains with fittings are varied. To ensure that washing does not turn out to be critical, you need to take into account not only the presence of eyelets, but also the type of fabric.

Natural materials

Linen is cleaned by delicate washing. To remove stains, the fabric is pre-impregnated with a chlorine-free product. Wash in warm water without spinning. Ironing should be done at high temperature.

Washing machines have their own mode for cotton; the water temperature should be 60 degrees. Ironing with steam.

Delicate materials

Organza is usually soaked in cold water. Be sure to wash in a protective bag. After washing, the curtains are immediately hung on the curtain rod and do not require ironing.

Silk and taffeta are not soaked; they are washed on a delicate cycle without spinning. Washed items made from these materials are placed vertically so that they straighten under the weight of water. If the fabric is not smooth enough, you can iron it inside out with gauze.

Viscose and acrylic are washed in gentle settings, without spinning. To soften the fabric, use conditioner. Ironing is carried out through gauze, with an iron at medium temperature.

Before machine washing, fold the velvet inside out and select the delicate setting. When drying, the fabric should be placed horizontally.

Under the influence of external factors, nylon becomes yellow or gray; to return the white color, after delicate washing, the curtains need to be soaked for a couple of hours in water with dissolved salt. Curtains made of wool and chintz are washed only by hand in low-temperature water.

Hand wash curtains with eyelets

Volumetric curtains can be conveniently washed in the bath using the following algorithm:

1. Take 5-10 liters of warm water (30-40 degrees).
2. Dissolve washing gel in it.
3. Give preference to products for delicate washing or use shampoo in the proportion of 1 tbsp. l. for 2-3 liters of water.
4. Place the curtains in the water and leave them for 5-15 minutes.
5. Actively stroke the surface of the curtains with your hands. Do not wrinkle or twist the fabric.
6. Rinse the product thoroughly in the same warm water (it should stop foaming).

To clean curtains, you can use a hand-held steam cleaner or a special steam mop. Then the need for washing and ironing disappears altogether.

conclusions

Curtains and drapes with eyelets are easy to use, as can be seen from reviews, they are easy to remove and hang on a curtain rod, moreover, they decorate the interior favorably and fit any style.

First of all, dust settles on the curtains, this is especially problematic if the windows face the active side of the street. To avoid the appearance of dust parasites and simply an untidy appearance, the curtains must be looked after - washed, dry or steam cleaned. Curtains with eyelets are no exception and require appropriate care.

Can curtains with eyelets be washed? Yes, you can, but in compliance with the manufacturers’ recommendations and practical advice from specialists. Caring for such products is not a problem and in many cases you can do it yourself.

When choosing curtains with eyelets, you need to refrain from saving money and choose high-quality products so that after every wash and cleaning they look like new.

Alternative Cleaning Methods

The less often the product comes into contact with water, the longer it will last . However, this does not mean that you should leave your curtains dirty.

There are several ways to clean them without removing them from the curtain rod. Among them:

1. Vacuum cleaning . The device allows you to get rid of accumulated dust.
2. Cleaning with a steam generator . With its help, you can carry out wet treatment of curtains, but without the use of detergents.
3. Washing with a sponge and detergent . In this way, you can get rid of spot dirt and single stains.

Another way to carefully wash your curtains is to entrust their care to professionals.

How and when to hang up clean curtains?

1. We hang clean curtains in a damp state on the cornice. When threading the first grommet, make sure that the edge of the curtain is directed towards the wall and not into the room.

2. After this, screw back the tip and bolt to secure the pipe. We unfold the latter so that the bolt from the tip is not visible.

3. Immediately give the curtains the desired look by forming folds.

Tip: even if the curtains look wrinkled, hang them on the curtain rod while damp. After the product has dried, it can be removed and ironed. Drying on ropes, dryers and pipes will leave creases on the product that will be quite difficult to iron. Among other things, drying such a large product on a horizontal surface is quite problematic, especially in a small apartment.

Manufacturing technology

The technology for making curtains with eyelets includes several stages. Let's look at a manufacturing master class.

Calculation of the required material

The main elements of curtains on rings are the waves of drapery. To get such waves you need a woven product that is about three meters wide. You shouldn’t save money, otherwise it will affect your appearance. The width, which is four meters, is too much. The whole structure will look bulky. As for the length, it is selected individually.

Slicing Process

The next manufacturing stage is the processing of sections. You must remember to tuck the edges of the selected material. Therefore, you need to add four centimeters on the sides and bottom, and also about 5-6 centimeters from the top. To calculate the amount of material for the hem in the upper part, you should pay attention to the density of the fabric. The thicker the fabric is, the larger the hem should be. According to the recommendations of experts, the hem on dense fabric should be thirteen centimeters.

Also pay attention to the diameter because it is directly related to the bar. The diameter should be one and a half centimeters - this will help the curtains move freely.

Materials and tools

To do the sewing you need:

• Textile;
• rings;
• pencil;
• grommet tape;
• scissors;
• sewing machine;
• iron.

The number of eyelets must be precise to ensure beautiful waves of drapery.

It is worth immediately determining the required distance between the rings. The distance between the eyelets depends on how deep the pleats you want. For deep relief folds, the distance between the rings should be 22-23 centimeters, for soft folds - 14-16 centimeters. If there is a huge gap between the eyelets, the fabric will sag. The average interval is 18 centimeters.

When attaching two thick, heavy curtains (drapes) to the bar, the assemblies should be laid in a mirror image. This is necessary in order to maintain symmetry.

It is imperative to calculate the offset from the top. In this case it depends on the density of the fabric. If soft material is used, then the bend should be six centimeters. In this case, the eyelets should be four centimeters.

Marking fabric for eyelets

Before installation, make sure that the curtain is ready. By done we mean the edges are finished and the top of the material is reinforced with tape. Marking the product is the most important procedure. First we need to make marks in the places where we install the grommets. In these places, cutouts for the holes are carefully made.

Installation of eyelets and their snapping occurs on both sides. There is no need to use special tools. But using a punch and flaring tool would make the job easier and faster.