How to install blinds on a plastic window without drilling

Blinds allow you to hide from sunlight and prying eyes if necessary. However, in most cases they are not attached to the wall or ceiling, but to a frame, and sometimes they cannot be hung with magnets or tape. However, there are ways to install blinds on plastic windows without drilling, so that if desired, the structure can be removed without leaving any marks on the frame.

Kinds

There are several types of construction, the installation of which does not use self-tapping screws.

1. Roller blinds. This is a smooth piece of fabric that is rolled into a roll using a special mechanism.
2. Horizontal. The second name is “Venetian shutters”. Their canvas consists of horizontal lamellas. Typically they are made of aluminum, plastic or wood.
3. Pleated curtains. Instead of slats, they use a single piece of fabric with folds.
4. Vertical. They are a rail with vertical slats. They are often placed above the opening and act as curtains.

Care tips and advice

The good thing about blinds is that they don’t require special care. Products with plastic and metal strips need to be washed regularly with warm water. Structures attached to the window without screws can be easily removed from the window during cleaning and rinsed in the shower. After this, they must be wiped with a dry soft cloth, since aluminum products can rust. It is forbidden to wash the cornice itself with the mechanism under water - moisture will remain in it, which will negatively affect the operation of the system.

Roller blinds can be cleaned with a soft brush or vacuum cleaner, but under no circumstances should they be rubbed with a cloth. If the structure is heavily soiled, dismantle it and soak it in warm soapy water for several hours. After rinsing, you can immediately hang the canvases on the curtain rod to prevent the appearance of folds and creases. However, while drying, you should open the windows - without fresh air, especially in the cold season, a musty smell may appear. If you choose stretch curtains with a weighting agent, then it must be immediately returned to its place after washing.

Fabric blinds treated with moisture-proof impregnations cannot be washed. They are vacuumed or wiped with a soft cloth, and dirt is removed with a stationery eraser. If the stains cannot be cleaned in this way, you can try using a detergent, but without aggressive substances in the composition (this includes chlorine, acetone, etc.).

Pleated curtains deserve special attention. They, like other structures, are washed with warm water and detergent. Dry folded and unfold once every few hours to avoid sticking. Pleated fabric blinds cannot be ironed.

Types of brackets

They are divided into ceiling, wall and universal - it depends on the surface to which they are attached. They are usually made of steel or plastic, but are also found in other metals or wood.

By design they are divided into four types.

1. Fixed. They are used in cases where rigid installation is necessary.
2. Inclined. Such supports change their angle of inclination, which often does not exceed 15 degrees.
3. Multi-joint. Made of two parts, they have the ability to change the angle of inclination and rotation.
4. Tilt-rotary. Flexible arms that tilt, rotate and change length.

Installation of blinds without contact with the window block

Fitting windows with curtains without affecting the window block is an ideal installation method when trying to maintain the integrity of the frame.

There are several ways to hang blinds so that the window unit is not used as a load-bearing base and is not in direct contact with the blinds. Each of the technologies used does not require the use of a single type of accessory, but involves the choice of one of several devices that differ in design.

Important! The metal-plastic profiles used for the manufacture of window and door units vary in quality, therefore, if the consumer has complaints about the products (destruction, changes in geometry), it is important to present to the manufacturer a binding without abnormal holes, which can be qualified as a reason for weakening of the structure and a basis for refusal of warranty service .

Methods for installing blinds without contact with the window block

We will group the methods for installing blinds by location, and describe the installation technologies that can be used in this situation.

Note: the designs of roller blinds and roller blinds (roller blinds) are related, so everything described below applies to both accessories, which have a similar purpose - shading the room and limiting the view through the window opening.

To the wall above the opening

If the window sashes open outward, or, when opening inward, the width of each of them is less than the depth of the opening (in the open position, the sashes do not protrude into the room beyond the plane of the wall), then such a window can be equipped with blinds by mounting them on the wall above the upper slope - without any impact on the window unit.

In this way, the following types of accessories can be installed on this base:

• horizontal:
• vertical;
• roller (roller shutter);

Installing blinds above the upper slope makes it possible to limit the penetration of sunlight into the room as much as possible if the device is 10-15 cm wider than the window opening in each direction.

Roller blinds for window openings with window sills flush with the wall and protruding inward

When using roller blinds or devices with horizontal slats in blinds, a canvas of the same width as the window sill looks aesthetically pleasing.

The length (height) of the device depends on the geometry of the window sill - if the front edge of the board is located flush with the wall, then the curtain rod should be 10 cm lower than it. If the window sill protrudes into the room, then the cornice must be laid on it, or use blinds with ceiling brackets fastenings that allow you to position the canvas at the desired distance from the wall.

The design of vertical blinds with a significant width of the slats also forces the use of ceiling installation, since the slats cannot be located close to the wall in order to be able to rotate around their axis.

Vertical lamellas

Installation of blinds over a window opening, depending on the design, comes down to attaching the upper cornice of the device (with horizontal or vertical lamellas) or a roll with slats to the wall above the slope. If you choose the correct dimensions of the device, its installation operation is simple and can be done independently.

Options for wall and ceiling placement of curtains with complete overlap of the window opening

The length of the upper slope is measured and a mark is placed on the wall opposite its middle, from which a section equal to the design height of the curtains above the window opening is laid perpendicularly upward. Through the top point of this segment, using a bubble level, draw a horizontal line on which the roll or upper cornice of the blinds will be located.

Marking horizontal lines and holes for mounting brackets

The device is applied to this line, centered relative to the window opening, and marks are marked on the wall at the drilling sites for attaching the brackets.

Using a drill and a drill bit, make mounting holes in the concrete, insert nylon holes into them and fasten the brackets along them with self-tapping screws.

Applying marks where holes are made

Important! Self-tapping screws should be used with a diameter of 4-5 mm and a length of at least 60 mm - the hole should not be limited in depth by the thickness of the plaster layer, so it is better to replace standard fasteners of a smaller size.

In roller blinds, the roll axis with the gear shaft is removed from the brackets. The brackets are mounted along the holes made, and then the axis with the shaft and the curtain is re-attached to them.

Installing a shaft with a curtain and a gear drive on an axle mounted on a bracket

The disadvantage of installing blinds on the wall above the window is the visual concealment of the volume of the room when the curtains are completely closed, since the niche above the window sill becomes covered from view.

To the upper slope

Installing blinds on the upper plane of a window opening is technologically no different from installing them on the wall above the window. The difference in arrangement lies only in the brackets used (ceiling fasteners) and the dimensions of the blinds - they must fit into the window niche.

You can use the same structures as those installed above the opening - with horizontal or vertical lamellas, as well as roll ones.

A necessary condition for the possibility of such an installation is outward-opening or static, fixed doors.

The marking is done as follows:

• A longitudinal line is drawn along the upper slope, parallel to the plane of the binding and at a distance of 7-10 cm from it (but not closer than 5 cm from the edge of the slope) - so that the handles for opening the shutters do not protrude through the curtain;
• The upper cornice assembly is applied to the line, centered along the niche, and marks are made along the holes in the brackets for drilling mounting holes.

Then the holes are drilled and the brackets are attached to the base.

The distance from the holes to the outer edge of the slope should not be less than 5 cm

When installing horizontal and vertical blinds, after marking, the brackets are removed from the device and attached to the base separately, and then the cornice is attached to them.

Important! If the slats of vertical curtains are removed from the guides for ease of installation of the curtain rod, then before removal they must be numbered for subsequent installation in the same sequence, otherwise the artistic design of the canvas as a whole may be violated.

The installation of roller blinds on a slope is identical to the installation of slats, but when purchasing, the choice of blinds of this design must be correct - wall-mounted models are not always designed for mounting on the ceiling.

Roller blinds: on the left - only for wall placement, on the right - universal

The disadvantage of installing blinds or roller blinds in a window opening is the inevitable gaps between the canvas and the side slopes, which reduces the effectiveness of shading the room.

Installation instructions

To begin with, it is important to take the correct measurements of the opening. If you plan to attach it with an overlap, you need to add 5 centimeters in width, and if inside the window opening, on each side, on the contrary, subtract 2 centimeters.

Drop-in brackets are suitable for sashes. For lightweight blinds, you can use plastic ones, but when installing heavy wooden or aluminum ones, you can’t do without metal ones.

Plastic fasteners are placed on the sash. It is necessary to fix the bar on them. Lower the canvas and make sure that it covers the window opening and can support its weight.

Locks are installed on the sides so that the doors can open normally. After installation is complete, you may find that the plank bends. In this case, more fasteners must be installed to support it.

Metal holders are mounted in the same way, after which they need to be firmly clamped with a key. You can also secure the bar with tape or magnetic strips.

Tip: after fastening, the runners should move along the cornice smoothly and without effort. The control cord and chain must not get stuck in the mechanism.

Top mount

Bottom mount

Installation on tape

A very simple installation method is with double-sided tape. In this case, the frame does not deteriorate. This is a quick method, but it has one drawback - fragility.

Over time, the adhesiveness of the tape decreases, and the rail may simply fall.

Here's how to attach blinds to a window: you need to attach the curtain rod to the frame and make marks where the supports will be installed. These areas must be degreased.

It is best to use an antistatic agent - this is the safest composition; the plastic will not bubble or dissolve. Install the fasteners with double-sided tape and place the curtain rod on them.

Another way is to tape the curtain rod directly to the window frame. In any case, the entire structure should not be massive and heavy.

Tip: Double-sided tape should not be used on cold surfaces. In winter, it is better to heat the window frames. This can be done with a hair dryer or heater.

On plastic brackets

Plastic fasteners are used to install blinds on the window sash. To do this, you need to install and fix the support on the sash.

After this, you can install blinds on plastic windows. The holders are made of small plastic and are almost invisible on the window frame.

On metal brackets

A metal holder is heavier and more expensive than a plastic one. It is attached to the frame and fixed in one position with a movable tab. This design is more rigid and reliable and allows you to secure massive structures such as wood and aluminum.

Metal elements stand out noticeably, so it is better to use them in large rooms or offices.

Spring bracket

This type of holder is best suited for mounting on window sashes. Plastic or aluminum spring brackets are hung on it and secured with a special seal.

Covers or clamps with special fastenings are installed on them. Next, the plank is mounted.

Magnetic stripes

This type of fastening is suitable for windows with metal slopes. In this way, you can securely install the blinds on the frame.

Here's how to attach blinds to plastic windows using magnetic strips: you need to attach one of the magnets to the frame, and attach the other to the bar with double-sided tape or glue. For greater reliability, you can use magnetic tape not only in the upper part, but also along the entire perimeter.

The reliability of this method depends on the type of magnets. Niodymium ones are better suited - they have high power and resistance to demagnetization. But their cost is appropriate.

Advantages of installing blinds without drilling

There are many advantages to blinds that are mounted without the use of screws, and the main one is maintaining the integrity of the window opening. For example, owners of rental apartments are often against drilling frames.

Another advantage is cost savings. There is no need to spend money on calling an installation specialist: simplified mini-systems are easy to install yourself.

Other advantages:

• the thermal insulation of the window is not compromised, since inept handling of a drill sometimes leads to damage to the frame and deterioration of the window’s functions;
• the structures can be quickly removed - this simplifies the process of cleaning the products;
• after dismantling there are no holes left - the original appearance of the window is preserved;
• blinds with magnetic fasteners do not sag even when the shutters are opened;
• Products and installation are much cheaper than blinds with traditional fastening methods.

The systems even outperform curtains in some ways. Blinds allow you to open the window sill and do not “eat up” space. They will be a good solution for a small room where every centimeter of the room is precious. Almost any type of design can be supplemented with curtains, if such a desire arises.

Advantages and disadvantages for plastic windows

Using PVC blinds on windows without drilling has many advantages compared to other installation methods:

1. You can do the installation yourself.
2. Low cost.
3. They are very compact, which saves window sill space.
4. Allows you to avoid unaesthetic holes and does not violate the integrity of the window profile structure.
5. The integrity of the window profile helps maintain the warranty on the windows.
6. The presence of magnetic clamps on the clamping brackets allows you to keep the blinds in an inclined position when ventilating the window and at the same time avoid sagging.
7. Possibility of attaching to each sash separately.

Installing roller blinds without drilling takes a few minutes and does not require special knowledge and skills. Perhaps this is the simplest and most profitable option.

You can install curtains in just a few minutes.

The main disadvantage of this installation method is that it cannot be used for heavy and massive structures made, for example, from bamboo.

Popular manufacturers of blinds and curtains

Popular manufacturers of blinds curtains Leroy Merlin offer cascading Roman blinds that can be easily and simply installed yourself. A wide range is represented by roller blinds from the most expensive to the cheapest, from small to very large.

Popular manufacturers of blinds use the latest technology, resulting in a beautiful product with high performance characteristics.

Antiseptic, antibacterial and anti-dust impregnation make it easy and without any problems to put the products in order yourself.

Bamboo Roman blinds have become very popular lately. They are highly resistant to sunlight and high humidity. They are hypoallergenic and will fit perfectly into any interior due to the variety of colors.

You can focus your room design on blinds.

rollDecor - the product range of this company differs from others in that they work with an innovative material - inflector. It is widely used in the space industry. The inflector is the main one in the operation of the Injector system. It is almost invisible, very light and its main advantage is the ability to reduce the heating of the room by 2 times.

Installing blinds yourself is quite simple if you know a few tricks to make the process easier.

This material allows only natural daylight to pass through and blocks the sun's rays. It consists of 4 layers:

1. Perforation – promotes transparency.
2. Collector – responsible for strength, located inside the fabric.
3. The silver layer reflects solar energy.
4. Laminated - increases operation, has dust and moisture repellent properties.

Choose trusted manufacturers of blinds, because the comfort of your home will depend on the quality of the design.

The designs of this company are distinguished by very high quality, a huge selection of products and an appropriate price.

Today you can choose blinds of any color.

Gardenia is a German company whose production is based on resource-saving technologies. Thermoplastic is a very environmentally friendly material. Manufacturers have been delighting customers with their products all over the world for more than 70 years. The diversity and attractiveness of the color palette, the use of various shapes and designs, and various types of raw materials make the products exclusive and unique.

Today, many countries have good modern factories for the production of blinds.

Blinds Market is a well-known Russian manufacturer. Its warehouses are located in all major cities, which is very convenient for fast delivery. The company specializes in the production of electric curtain rods. The type of frame is selected depending on the curtain model - for example, window blinds with a triangular or round frame. The products are represented by various types of curtains: vertical, horizontal, pleated, roller, zebra, Roman, roller shutters and photoblinds.

A variety of shapes, colors and sizes of blinds will help you quickly decide what is needed for your windows.

There is a flexible pricing policy, discount programs, extended warranty periods, a huge selection of products, non-standard solutions and fairly high quality.

Blinds for plastic windows without drilling are a very convenient and cost-effective solution that can quickly create a new, more comfortable atmosphere in the room.

Nuances of installation on metal brackets

The nuances of installation on metal brackets are that they are very noticeable above the eaves of the window system. They are more suitable for large office spaces. Another disadvantage is the impossibility of installation on fixed windows.

Before deciding on the method of installing blinds, consult with specialists

This option is considered the most expensive. The design fits quite firmly to the window and does not become loose during operation. Mounting to metal brackets is considered the most reliable and quite durable when used correctly.

Models that install only with drilling

Cassette, built-in and horizontal models are mounted only using the drilling method. But the design involves installation on a glazing bead, which is easy to replace after dismantling. This way, there will be no holes left from drilling in the glass unit. Due to their heavy weight, vertical and horizontal products, the slats of which exceed 50 millimeters, are not held on with tape.

The design of these types of blinds does not provide for mounting on brackets. The width of the box does not allow the structure to be securely fastened. Therefore, only drilling will securely attach it. If you have chosen a massive structure and have to make holes in the glass unit, silicone will help deal with residual marks. When the structure is dismantled, the marks are filled with white silicone. It prevents depressurization and hides remaining holes.

Installation of roller blinds

Choosing the location of the control mechanism - The chain control mechanism is usually placed on the side where the window hinges are attached, minimizing the visibility of additional elements.
Installation of the guide string. To avoid sagging, a fishing line is used; this will allow the roller blind to fit tightly to the frame.

We fasten the guide string in the eye of the upper bracket, cut off the excess length of the string and pass the curtain through the eye of the lower curtain weight.

At the bottom of the sash we attach a fishing line weight, thread the string into the eye of the tensioner and secure it using a rotary locking mechanism.

To fix the upper position of the curtain, you need to fully raise the curtain and use the clamp included in the kit and set it to the desired height. We do the same thing to fix the lower position, lowering the blade completely and installing the lock in the desired position.

To achieve the effect of symmetry, make sure that both sides of the curtain, both in the lowered and raised positions, have the same level of fixation.

Roller blinds of the Standard system

Also called classic. A distinctive feature of this type of roller blind design is the diameter of the cornice, which is from 25 mm to 35 mm (an aluminum tube on which the fabric is wound).

The canvas in such a system is free-hanging. It does not have lower fixation and lateral restrictions (guides as in the uni system). There is also a weighting strip at the bottom of the canvas. This system is attached to the top of the window opening, and since the mount is universal, the curtain can be attached to both the ceiling and the wall.

If you are looking for roller blinds to darken a large opening area. The roller blind of the standard system is exactly what you need.

Features of installing roller blinds

When installing roller blinds, there is no need to drill mounting holes, which undoubtedly simplifies the entire process of hanging the equipment. There are two types of fastenings for roller window systems:

• Fastening with hooks that simply cling to the top of the sash.
• Fastening equipment with double-sided construction tape.

Attention! The surfaces on which construction tape is glued must first be degreased.

Detailed recommendations for installing curtains with step-by-step instructions are included with each purchased product. By following the instructions for assembling curtains offered by the manufacturer, you can easily and quickly complete the work yourself.

When installing roller blinds, be sure to use a building level; this will protect against distortions and help secure the curtains as accurately as possible.

Source: inter-er.ru

In office premises

In office premises, an excellent solution would be to use roller blinds with a light transmittance of 50%; this will allow you to avoid sunlight, and the evenly transmitted light will not distract from work, also eliminating the appearance of glare on computer monitors.

In conference rooms, curtains with blackout fabric that completely isolate light are suitable. Allowing you to concentrate on negotiations, and the simplicity of the design of roller blinds is an undoubted advantage over classic blinds or fabric models.

Roller blinds in the kitchen

The kitchen is the place where every housewife spends a significant part of her time, which is why every detail in interior design is so important. The use of different colors in the design can significantly change the atmosphere of the kitchen by increasing the space or adding zest by adding illustrations to the interior on a specific theme.

The best option would be to use mini roller blinds with fastening without drilling. For a greater insulation effect both from direct rays and from the prying eyes of passers-by, you can use a cassette design with blackout fabric.

If you need to be able to control the flow of light, roller blinds are perfect, day-night, which are also mounted on a separate window sash without the use of a drill.

Fasteners

All fasteners for installing blinds without drilling are developed by manufacturers taking into account the size and weight of curtains; they are reliable and designed for a long service life. Fasteners and installation instructions are included in the kit. There are several ways to attach blinds without drilling:

• double-sided tape - for installing light and small-sized curtains;
• magnets on double-sided tape, the installation principle is identical to the first method, the only difference is in the design features of the blinds;
• brackets-clamps.

According to reviews from craftsmen, it is advisable to hang blinds with tape only on plastic windows; on wooden surfaces such fastening is unreliable.

Role in home decor

The main purpose of these roller blinds is to protect the room from sunlight. They effectively absorb light, providing pleasant shade in the room. The functional component does not prevent roller curtains from performing another task - decorative.

Roller blinds can be combined with regular curtains

The canvases fit perfectly into any style direction. They are used in classic design, hi-tech, minimalism. Curtains of this type bring a special piquancy to Art Nouveau, Provence, and English style. Light tulle can be used to complement their attractive design.

Third group. Blinds with mounting to the ceiling or wall.

It’s easiest here. These are large and heavy products that are attached only to the ceiling or wall. These include:

• vertical blinds
• wooden and bamboo horizontal blinds with thick 50mm slats
• horizontal blinds “plastic under wood” (manufactured only in the version of 50mm slats).

Install with tape

This method of installing blinds is one of the simplest and fastest. To do this, you will need a special adhesive tape, which is intended for such work. It is important to use only new and high-quality materials that provide reliable and durable adhesion.

The process of attaching blinds to tape can be divided into several sequential operations:

1. Initially, the window frame is thoroughly washed and dried. This will prevent debris from getting under the tape, which significantly reduces its service life.
2. The next step is to degrease the mounting area. This can be done using various compositions that are present in every home. Some experts recommend using only acetone for such purposes.
3. To attach the structure evenly, you should mark the sash. To do this, you need to make several marks on the frame. They must be strictly horizontal, which will allow the curtains to be attached evenly.
4. Installation of blinds begins with gluing special pads. They are already sold with tape attached to them. To fix these elements, you need to remove the protective layer and apply it to the right places. After this, plastic holders are glued to these sites using double-sided tape. It is also important to place them evenly to ensure that the canvas is horizontal. The procedure is completed by hanging the blinds on the fastening elements and checking the functionality of the system.

Please note that if you glue the pads unevenly, the product will look ugly and you will have to repeat the entire procedure again.

Varieties

You can decorate standard double-glazed windows with curtains of different types. The varieties are discussed in more detail in the table.

Classification feature	Types of sun protection systems	Character traits
Mechanism type	Classic	The fabric is in the public domain. The canvas does not fit tightly to the plastic. At the bottom there is a weighting agent. It prevents the fabric from sagging. The matter is additionally fixed with fishing line.
Cassette	This type is equipped with a special box. It's called a cassette. The fabric is not visible when twisted. When torn off, it adheres tightly to the windows, providing one hundred percent protection from sunlight.
Type of fabric	Transparent	They easily transmit light and diffuse it pleasantly throughout the room. Used as a window frame decoration together with curtains.
Day Night	This type is usually installed in the kitchen. The canvas consists of alternating transparent (day) and dense stripes (imitation of night). The strips allow you to independently adjust the level of darkness in the room.
Dimout	Used in office and commercial premises. They have medium density and diffuse light well.
Blackout	Very thick fabric. Create good shade in the room. They are often hung in children's and bedrooms.

Curtains made of thick fabric can completely block out daylight

Good to know! Having chosen the cassette type, you must separately select the color of the box. It should be in harmony with the color of the window frame.

The cassette curtain box, matched to the frame, is hardly noticeable on the window block, and the canvas does not interfere with opening the sash