How are garages opened? The main methods of protection against hacking

• 3 ways to open a garage
• How to open a garage with different types of locks
• How to open a garage lock if the key is broken
• What to do if the gate does not open

Securing your garage with a quality lock does not guarantee that there will be no problems. Sooner or later, the lock may become unusable and break. As a result, you will not be able to open the garage and get inside. At the same time, the reasons for problems with locks are very different:

• wear of the mechanism as a result of intensive use of the garage door;
• low quality lock;
• poorly executed insertion of the mechanism;
• shrinkage of the door structure;
• unsuccessful attempt to break into the locking mechanism.

Important! Sometimes it gets to the banal: the owner simply lost the key to the garage, so now he doesn’t know how to open the gate.

What to do in all these situations? The simplest and most effective solution is to call a specialist from a specialized service. Specialists arrive at the site quickly and have the necessary tools and devices in their arsenal to quickly and with minimal damage break into the locking device. An alternative option is to open the garage lock yourself. Below we have prepared some practical tips on how you can do this.

Opening methods

There are various life circumstances that force the owner to open his own lock without a key in order to get into the garage without going through the roof.

There are various reasons why the mechanism cannot be opened in the usual way:

• Water getting inside and freezing;
• Wear of parts or elements;
• Damage resulting from intentional break-in by thieves;
• Lack of keys due to their loss.

In this case, you can try to warm up the mechanism or find the keys. Standard opening methods are unlikely to be useful and it is not a fact that you will be able to open the lock in the shortest possible time. Do not douse the mechanism with flammable substances.

To make the warming process faster, you can use a hairdryer, a burner, and periodically knock with a hammer on the garage door where the housing is installed.

Cutting out the fastening involves drilling out the welding points of the body, fastenings, cutting the edge of the gate, and drilling out the secret. Using a master key, with knowledge and skills, this method is one of the easiest to open a padlock. Opening and destroying the secret is a fast and reliable method. After destroying the secret, it is usually possible to unlock the mechanism without problems. One of the most common causes of jamming is the use of the wrong lubricant or improperly installed doors. Lubricating with any type of food fat (oil) will cause rapid damage to the device.

Expose a wall - the first popular hacking method

If your garage is located in a place far from public view, and its back wall overlooks a vacant lot or is close to the blank wall of another building, you can be sure that this is the method they will try to display your property. The method is simple - the wall is dismantled at the back, and all valuables are simply taken out of the resulting hole in a few minutes. A minibus driving close to the wall is unlikely to arouse suspicion even in a busy neighborhood, let alone in a vacant lot.

The features of the method are quite simple:

• usually garages are built with a half-brick wall, and the brick itself is placed on edge in order to save materials and not overpay builders for work on site;
• there is also no insulation, since there is no need for it, so there remains a bare wall outside and inside, even a layer of foam insulation is unlikely to complicate the task;
• such masonry is broken with several blows of a sledgehammer or a large hammer, and then disassembled to the required size, forming a convenient opening for carrying your things outside;
• a machine for loading stolen property can usually be driven directly to the back wall of the garage box, this greatly simplifies the task for intruders and covers them in the event of people passing by;
• It will be difficult to take the car out of the garage through such an opening, but taking out all the other things, including large elements, can be done very simply, so it’s worth thinking about safety.

Now you know about the most popular methods of theft from garages, so you can protect yourself and your property from theft. Most likely, it is better to organize protection using reinforcement; for this purpose, metal gratings or profile systems are used, which are installed on the internal walls and welded into the overall frame of the garage box. It is also possible to build additional internal walls, including pouring reinforced concrete. This will not guarantee protection, but it will definitely extend the time it takes for thieves to open the garage.

Drilling options

To drill out a lock, you need to follow a certain algorithm. First you need to examine it and find out what it is made of. Some have anti-drill protection or may be made of hardened steel.

If you are not sure what the device is made of and what its structure is, it is better to contact a specialist.

You need to make sure that a regular lock without a secret can be opened, and one whose cylinder can be removed without problems. Before you start drilling, you need to turn off the alarm. Stock up on tools, namely a powerful drill with adjustable speed (it is not recommended to take a hand drill), and drills suitable for the size of the mechanism. The drill must be inserted into the drill, the diameter should be 3 mm.

Above the hole, you need to mark a point that serves as a guide for drilling; it should be located above the cut line. If you cannot find this point, you need to find a drilling template for a similar device, which are sold in stores. This method is intended for picking locks in your house, apartment, or garage. Trespassing on someone else's property is a criminal offense and is punishable by law. Having completed the entire algorithm on your own door, installing the drill on the guide, you need to drill out the lock cylinder. Destroyed pins will allow you to open it.

What difficulties may occur during drilling:

1. The appearance of resistance due to the fact that pin 6 or more.
2. Resistance when the drill comes into contact with each individual pin.
3. If you get stuck, you need to turn on the reverse and pull out the drill, remove the sawdust from the metal.

There is no need for haste in such a matter. You should not work at high speed and press on the drill, otherwise it may break. The drill must be held level so as not to damage the device further. After you have a hole with a diameter of 3 mm, you can drill a new one with a diameter of 6 mm, then the pins will certainly be destroyed. You need to insert the end of a screwdriver into the lock cylinder and turn the mechanism like a key. If everything is done correctly, it will open.

Tools needed when opening a door without a key

The choice of tool, the use of which is necessary to open the door, directly depends on which direction the door opens: inward or outward. In addition, some of the tools are interchangeable; if one is missing, another is used. The kit of a beginner “safeguard” should contain a number of the following devices:

• Pliers.
• Hairpin (a truly versatile tool featured in movie door-breaking scenes).
• The so-called Bulgarian.
• Drill.
• Iron scrap.
• Jigsaw file.
• A set of screwdrivers, or one flat one.
• A universal door master, which can currently be purchased at any hardware store.

Tips on how to open a garage lock

Such shutter mechanisms have a long history. Their advantages are low cost, ease of use, but they are relatively reliable. There are various situations where you may need to break your own lock. For example, the keyhole breaks when it is used all year round outside in the falling rain and snow, causing it to wear out faster. It may also be due to thieves who tried to knock down the doors or open the mechanism.

How to open a padlock yourself:

1. You can try to open a broken device with a master key made from an aluminum can. A triangle should be cut out of it, which will help open the lock with a sharp angle.
2. You can open the mechanism with a master key from a paper clip if you work correctly with the coil spring. The main thing is to get into the spring.
3. The most correct way is to open it with special master keys: then you don’t need to do anything extra, and the lock opens quite easily.

Can be knocked down with a crowbar. Some locks are difficult to pick, so you have to drill out the entire cylinder to open the door. Then you need to take a 12 mm drill, either a special one for drilling locks, or a tubular one. When drilling, do not touch the drill with your fingers; it is very hot. You can get burned and injured. When working, wear safety glasses.

Pros of a falling key locking device

Locks of this type have many advantages. No wonder they just appeared, they quickly spread and now they can be found in almost every fifth garage. So, the advantages of falling key locking devices.

• The lock is very simple, there is nothing to break in it, thanks to this it can serve not only for decades, but for centuries. The main thing is to occasionally clean it of dirt and lubricate it.
• Such a lock is unremarkable; the usual hole for a key hints at a simple homemade locking device, although thieves will not know anything about its type, nor about the surprises that this lock stores.
• This device does not have a secret part, which means it is not possible to pick up a master key for it. Theoretically, you can try to open it with a roll, but to do this you need to make a special tool for a specific lock, because the distance from the gear teeth to the keyhole is unknown to thieves. Only a special master key with a drop-out head can help, and then with a large degree of convention.
• The lock is well protected from rough hacking; this is confirmed by a powerful metal body, a bolt made of a metal rod with a thickness of at least 20 mm and a steel gear made of metal with a thickness of at least 8 mm. If you wish, you can further strengthen the body with an armor plate. In this case, it will be easier to cut a hole in the garage gate using an autogen than to open the lock itself.
• The lock can be made by hand, this, on the one hand, will make it even more reliable, because you will determine the dimensions of the parts yourself, which means that attackers will not know anything about them. On the other hand, this will significantly reduce your costs of protecting your own garage, because the cost of such a lock is very low.

Important! When making a lock with their own hands, craftsmen, instead of a standard round keyhole, make holes of an unusual shape, additionally embedding pins into them. These measures make intelligent hacking almost impossible.

Disadvantages of a falling key locking device

Locks of this type also have disadvantages, as does any mechanism made by human hands. True, these disadvantages are relative; one might even think that we are “being picky.” But for the sake of objectivity, they should be mentioned.

1. Locks of this type have excessively long keys. In homemade versions of such locking devices, the keys are deliberately made even longer in order to increase the reliability of the locks. In this regard, you need to figure out where to put such a key, because an ordinary pocket will not be suitable for this matter.
2. The second disadvantage is that it is difficult to return the falling head, which can lead to difficulties in removing the key from the keyhole after opening the lock. But the craftsmen solved this problem with the help of an ordinary thin wire, which is tied to the edge of the falling head on one side, and to the lamb on the other. To refill the falling head, you just need to press harder on the thumb and then pull the wire, the key will come out easily.

Ideas on how to open a deadbolt lock

The rack and pinion lock is a mechanical overhead lock and has 2 bolts for locking. It is not burglary resistant and wears out quickly. In principle, it is unpretentious to temperature and humidity, which is the main advantage.

It is burglar-resistant and therefore not suitable for use in apartments and houses; it is most common in garages.

This type of lock is installed in an overhead manner, secured with self-tapping screws and bolts. There are various methods to hack such a mechanism.

Several basic methods that have already been proven and widespread:

1. Opening with guitar string, wire or fishing line. To do this, you need to make a loop from the fishing line, insert it into the hole and loop it around the pins. Next, you need to pull the fishing line in your direction with smooth movements. The door should open.
2. You can open the door with a pencil. You need to lubricate the device and release the bolt, drive a pencil or similar object into the hole. The rack teeth leave grooves on the object, allowing the mechanism to open.
3. You can open it with a screwdriver or an awl. You need to clamp the door using your own weight and move the teeth with a screwdriver or other object of similar properties. After opening the upper bolt, you need to block it from closing with a thin object such as a match and open the lower one in the same way.
4. One proven method is to open it with a drill and screwdriver.

The advantage of the latter method is that there is no damage to the door. You need to take the paper and put it between the doors, determining the position of the bolt. Then drill a couple of holes in the box and move it.

Rack and pinion keys are quite difficult to make in a workshop, which is why it is not always possible to make duplicates.

Secret mechanism device

It is quite simple, the only difference is in the number of crossbars, their shape and location; The more elements, the more reliable the constipation.

In the upper part of the metal plate associated with them (the “slider”) there is a cutting in the form of oblique grooves (in some models they are directly on the slats). The key has teeth with the same pitch and parameters corresponding to the recesses of the “secret”. Having inserted it into the hole, you can open the lock by simply turning it. In this case, it is recommended to press the door slightly to facilitate the movement of the fixing pins.

• Easy to install - the rack lock is attached to the canvas in an overhead manner.
• Durability. The design is so primitive that there is nothing to break in such a locking device; Traditional pins, levers, and elements of electrical equipment are absent.
• Possibility of making it yourself.
• Low cost rack-and-pinion garage locks.

Instructions on how to open a garage lock

Opening lever locks does not seem to be an easy task, but it is quite possible. It consists of recesses and grooves, of which there are a huge number. To lock such a device, you need a butterfly key. If you open the lock yourself, you can damage parts of the mechanism. If you are not confident in your abilities, you should use the services of masters.

What you need to open the lock:

• Screwdriver tip;
• The needle is bent at this tip;
• The resulting roll is inserted parallel to the master key into the keyhole.

Such a homemade key must be pushed all the way, then unfolded and left in this position. Then you need to carefully move each plate.

Pick-gun

Pick-gun hacking is the use of a special tool to install pins in a line and rotate the cylinder.

To counter the pick-gun, there are several constructive solutions:

• use of other elements in the cylinder design (for example, disks, frame cylinders)
• combination of cylinder mechanisms with other security elements (frames + pins)
• additional recognition elements in the cylinder mechanism and key (for example, a wheel)
• protective pads blocking access to the end part of the cylinder mechanism, magnetic and code pads

Internal lock: how to open

Interior doors do not have a high level of security or alarm. But, owners often use internal locks to lock them, which are quite strong. Often their purpose is to protect the room from drafts, children and animals. There are often cases when such a door closes, and the owners have lost their keys somewhere, but they need to get into this room.

There are proven methods that will help in opening a closed door:

1. You can open the lock using a pin or knitting needle or wire. You need to put the object into the keyhole and scroll. The main goal is to hook the mechanism, which should be turned in the required direction, then the lock will be opened.
2. You can use a ruler or knife as a master key. They need to be inserted into the gap where the crossbar is and moved to the sides. There is a possibility of the door opening.
3. A plastic card often helps out in such a situation. You need to swipe your card along the castle.

It is better to avoid such a situation than to get into it. To do this, you need to monitor the presence of keys and the serviceability of locks and handles. If the slamming occurred due to a malfunction of the door handle, you need to try to disassemble it using improvised means: a file, a knife, etc. When everything unnecessary is unscrewed, you need to turn the mechanism.

A door with such a lock can close from a sharp jerk. Then you need to find a hole in the lower half of the handle and insert a nail or other thin object into it. By pressing, you can push out the key and the lock will open again.