Learning to shorten blinds (horizontal and vertical) (13 photos)

After remodeling the interior and replacing standard windows with new, original window openings, many people think about how to use existing curtains and adjust them to size. Without bothering yourself with a visit to a specialist, you can consider how to shorten blinds at home, saving time and money.

In recent years, blinds have been actively used in interior decoration. The main purpose is to reject direct sunlight and at the same time reduce high temperature in the room. The variety of materials is great, which allows them to be used in various rooms, kitchens, children's rooms or bathrooms. Design samples using blinds change the usual environment and update the interior. This is a fairly simple design of horizontal or vertical strips, which are made not only of fabric, but also of plastic, metal and wood. Using the cord, you can adjust the angle of inclination, move or rotate the slats.

Detailed step-by-step instructions on how to shorten blinds in length and width


The need to change the size and shape of blinds appears in different situations: due to replacing windows, finishing a window opening, changing the shape of slopes, etc. Is it possible to independently cut blinds to width and length, how to shorten a cornice? In some cases, it is necessary to contact a professional to avoid damaging the structure. This article describes in detail how to properly shorten blinds yourself.

How to reduce in height (length) or width?

Before the procedure, you need to prepare the necessary tools, which depend on the type of curtains and the direction of fitting:

    The easiest way is to reduce the length of horizontal blinds when the width matches the window parameters. It is enough to disassemble the structure from below in a certain order, remove the excess slats, and then fix the bottom bar again (read about how to make and install horizontal blinds here).

If you choose horizontal blinds, then preference should be given to matching the width rather than the length, since shortening a curtain of this type is easier than trimming metal or wooden slats.

  • In the case of vertical curtains, you need to try to guess the length (read more about how to assemble and hang vertical blinds here). It is easier to eliminate several side elements than to cut all the slats in height. In roller blinds, shortening is allowed in different directions, but the work is a little more complicated, since some materials require processing of the edges of the fabric. Most often, overlocking or sewing a thin finishing tape is used (you can learn more about the types, installation methods and cleaning of roller blinds here).
  • Horizontal

    Despite significant visual differences, horizontal blinds have similar components to vertical ones:

  • lifting mechanism;
  • rotary handle;
  • lamellas or panels;
  • cord for moving curtains vertically;
  • common cornice;
  • mounting brackets.

The material of the slats is wood, plastic or aluminum. Shortening the height of horizontal blinds is done with scissors and a lighter or matches. This is required to cut the cord and threads of the ladder, burning their ends to maintain integrity. The soldered ends are easier to thread through the holes in the slats.

Instructions for shortening horizontal curtains:

  1. Measure the length of the blinds and mark it on the wall. You can use masking tape or other materials that are harmless for finishing and stick to the surface.
  2. There are a pair of plastic plugs on the bottom of the final curtain strip. They need to be removed, pulled out a little from the structure so that the control thread can be cut. Here, after this operation, you need to burn the ends of the artificial cords so that they do not unravel.
  3. To remove the interfering slats, you must first remove the control cord 1 slat higher from the mark on the wall. Then cut off from 1 to the last “extra” planks after the gap formed. There will be approximately 2 flights of stairs left.
  4. The bottom strip with the adjacent lamella is removed and threaded into the empty space left in the main structure.
  5. The control cord is passed through all the holes of these slats and strips in the reverse order. Plastic clips are again put on the ends of the cord, which are attached to the recesses on the bar. But before that you need to tuck the protruding ends of the rope ladder.

To do this you need:

  1. Remove the cap from one side of the cornice.
  2. Remove all elements of the blinds or move them away from the cutting site.
  3. Measure the desired width of the product. Use a hacksaw for metal or wood (what the cornice is made of) to make an even vertical cut.
  4. Horizontal curtains are also shortened according to the width of the lamella, and new holes are made in each of them at the required distance from the edge for the control cord.

In the case of vertical ones, several extra lamellas are removed. Shortening the width of rolled products requires cutting the entire panel and weight strips, finishing the outer edge.

  • All curtain parts are installed in their original place.
  • A plastic plug is put on.
  • If we are talking about an expensive product, then it is better not to take risks and take the blinds to professionals.

    We suggest watching a video on how to shorten horizontal blinds yourself:

    Vertical

    Vertical type structures contain the following set of parts and elements:

    • chains for lamellas and control cord, lower connection of lamellas;
    • weights or weights with which the vertical bar is stretched;
    • runners to which individual construction panels are fixed;
    • decorative and load-bearing cornice.

    You will need the following set of tools to shorten the height of vertical curtains:

    • paint knife or scissors;
    • tape measure or ruler, simple pencil;
    • iron for cauterizing the lower cut part of the product;
    • a lighter or matches to form a tight end of the cut cord;
    • screwdriver with Phillips bit;
    • fine-toothed saw or hacksaw for working with metal.

    Vertical blinds can be shortened in both directions: width or height. In the first case, you will need to cut the cornice to the required size, and in the second, each individual canvas will need to be cut, so the process is more labor-intensive than when working with horizontal analogues.

    Instructions for shortening vertical curtains:

    1. The dimensions of the window opening are taken, including the level of fastening of the cornice, taking into account the method of its installation. If the curtains should be to the floor, then you need to exclude 2 cm from the measurements, which must be left from the floor to the curtains.
    2. In case of removing the length of the canvases, shortening the cornice is not required. Since the lower part of the lamellas has a more complex structure, including pockets for weights, linings for connection with plastic chains, therefore the required height is cut from the upper part.
    3. Leaving a small margin for lapels, each lamella is trimmed to the required length. The plastic eyelet must be removed from the cut area. To maintain the integrity of the canvas, treat the edges with a lighter or a hot iron through a newspaper so that the material does not stick to the sole of the device.
    4. To thread the folded fabric under the lapel, you need to make a hole in the central part of the fabric into which to insert the eyelet. To glue the edges of the strip, strong-hold adhesives of the “Moment” type are used.

    The described actions are given for one lamella . It is necessary to shorten each element of the blind structure to the same length.

    To reduce the width of vertical curtains, the greatest difficulties will arise with the cornice. To do this you need:

    1. The cord and aluminum rod are removed from the inside of the cornice. The rod washer must be undamaged, so the cut on this element is made 2–3 cm further. To avoid accidentally cutting the cord, you should not cut it completely.
    2. The rod is removed from the cornice, and after processing with a file, the separated edge is pushed through the washer.
    3. At the required point, the curtain itself is cut according to preliminary measurements with the rod already installed back.
    4. To ensure that the cut parts of the structure do not damage other elements, they need to be cleaned with a needle file. Excess hooks are removed from the cornice. Since these parts are pierced by the control cord, you need to cut it with wire cutters.
    5. The washer on the end part of the curtain is placed figuratively on the structure, followed by shortening the lace. It is necessary to unscrew the plug that secures it with a screwdriver, cut the rope with scissors to the required length, and assemble the cornice structure in the reverse order.

    DIY shortening


    When shortening blinds, you must adhere to the following rules:

    1. Perform all actions very carefully, since most elements are very fragile and can be damaged.
    2. Make sure that the horizontal slats do not bend, since it is very difficult to straighten them, and the wooden planks will need to be completely replaced.
    3. Burn all ends of the cut fabric or cord with a flame or a hot iron; in the second case, use newspaper so that the melted synthetic materials do not stick to the hot metal.
    4. It is necessary to assemble/disassemble the structure in a certain order so as not to damage or confuse the elements.
    5. Use the tool that is suitable for working with a specific material.

    If you adhere to all the rules outlined above, you can efficiently shorten both vertical and horizontal curtains.

    Plastic

    Plastic ones need to be shortened from the bottom. Excess areas should be carefully removed. Make sure that there are no gaps in the cuts. It is better to sand them with light sandpaper. This is done in order to avoid injury during subsequent use.

    Recommendations

    1. Store the removed blinds in a non-hazardous area. You can always use them to change strips that may become damaged over time.
    2. You can shorten mini-blinds without removing them from the window by simply setting the length by eye. Shortening on a straight plane provides the opportunity to use precise measurements and is often considered a significantly rapid action.
    3. If the plugs are difficult to insert into the guide, use a rubber hammer to gently hammer them back into place. The softer it is, the less possibility of dents and other defects.

    So, remember all the tips and step-by-step actions in order to get wonderful products that will decorate your home. Video.

    How to shorten vertical or horizontal blinds?

    Have you purchased blinds, but they are made for standard windows and don't fit yours? Then you should ask how to shorten your blinds at home without turning to professionals. It's not difficult to do. The main thing is to remember that you need to work as carefully and carefully as possible so that the result is really good. There are different types of blinds (vertical and horizontal), and the process of adjusting each type to the desired size has its own nuances. For example, horizontal blind slats are usually made of metal. To shorten them, you need not a screwdriver and scissors, but other tools.

    If the blinds are larger than the window, then you can simply shorten them with your own hands.

    Is it possible?

    If the blinds are made of metal or wooden slats, then working with them is more difficult than with fabric or paper counterparts. Then the use of more complex tools and material processing skills will be required.

    Most often, it is necessary to change the length of the curtains, since factory products whose dimensions correspond to real windows after renovation in an apartment or house are not always sold.

    Attention: Products made to special sizes to order are much more expensive, so it is best to purchase ready-made curtains and shorten them at home.

    How to shorten vertical blinds?

    The width of such curtains is reduced by cutting the cornice. At the same time, the cornice of vertical blinds itself should be slightly larger in length than the window so that they look harmonious. First you need to measure the required length with a tape measure and make a mark on the cornice with a pencil. Then you can begin the shortening process itself, having first, of course, removed the blinds from the window. To trim the cornice, you will need a hacksaw or grinder and a file to process the edge of the cut, as well as a tape measure and a screwdriver. The cornice will need to be cut where the lifting mechanism is located (it can be either on the right or on the left). To do this, you must first remove the side cover from the edge of the cornice by unscrewing it with a screwdriver. After this, you need to put the cord aside, and then cut the cornice to the desired length. The edge of the cut must be filed to make it even. Now you can remove the extra hooks from the curtain rod and shorten the cord and chain. Then you should attach the side cover back and hang the finished blinds in their original place.

    To cut vertical blinds you will need a hacksaw.

    If you need to shorten the width of vertical blinds, you will first need to remove the slats from the hooks. After this, you need to carefully pull out the plastic strips with the eye for the hook.

    Now you can trim the blinds. If necessary, the edge of each strip should be treated with fire to prevent the fabric from fraying. The curtains should be cut with a margin for the hem, which will contain plastic strips with an eyelet (for this you can leave about 3-4 cm).

    You should bend the fabric and make a hole in each lamella for an eye, then insert the strip and wrap it in the material.

    After this, you can sew the lamella or secure the ends with glue. Once the glue has dried, you can hang the finished slats on the hooks.

    Reducing the width of vertical products

    The most difficult work lies ahead for owners of vertical curtains, which need to be reduced in width. Before shortening the blinds horizontally, remove the product from the window and make marks on the cornice. Free it from the slats and set them aside.

    Inside the cornice you will see a metal rod; this is what you will need to cut using a grinder. Follow these steps:

    1. Release the rod by carefully removing the washer with petals. It is very important to maintain the integrity of these petals.
    2. Make a small cut at a distance of 2 cm from the edge of the product. Be careful not to damage the cord running in the curtain rod.
    3. Cut off the rod, remove the end part of the product, remove the washer and the rod itself.
    4. File the cut edge and push the rod into the washer in the direction of the petals.
    5. Now cut the cornice itself and file the cut.
    6. Remove excess hooks from the curtain rod by unfastening them from each other.

    Reinstall the cornice end piece and tab washer. Now shorten the cord itself. Use a screwdriver to remove its plug, cut off the excess piece of cord and secure it back with the plug.

    How to shorten horizontal blinds?

    Horizontal blinds can also be adjusted to the required dimensions. The process will depend on how you need to shorten the blinds: length or width.

    This type of curtain is much easier to sew in than vertical ones.

    If you need to reduce their width, you can simply trim off the excess amount of lamellas. This can be done without even removing them from the window. First you need to determine how much shorter the product needs to be made. To present this more clearly and not be mistaken, you can make a mark in any convenient way on the window frame (for example, attach a piece of colored tape at the desired height).

    Diagram of horizontal blinds.

    After this, you need to bring the blinds into an open horizontal form. Then you need to release the control rope, which is used for adjustment, from the lowest bar from the clamps. To do this, you should remove the plastic fasteners holding the lace from this bar. You can untie the knots, but it will be faster to cut the rope. To prevent it from unraveling, you can singe its ends a little. After the fastenings are removed, you need to pull out the control rope on both sides of the structure just above the level of the mark that is placed on the window frame.

    Now you can carefully remove all the excess strips. In this case, you need to ensure that the remaining lamellas do not slide down and lose their symmetrical arrangement. The bottom bar must be attached to the last lamella and all the others must be passed through it, including through the lowest control rope. Plastic clips must be attached to the ends of the rope in the same way they were originally attached. But before that, you need to stretch the part of the ladder that remains from the unnecessary slats into the hole for fastening. Now, if you tighten the clamp and secure it in the hole, the ladder will also be secured. The remaining slats can be put away in the closet so that you can replace any of the ones left in the blinds.

    The process of reducing horizontal blinds in width is quite labor-intensive and requires special tools. To shorten them, you will need, firstly, to reduce the cornice, and secondly, the blinds themselves. To do this, you will need a hacksaw and a cutting tool.

    You will need to assemble all the slats together, securing them well, and saw off the extra centimeters, and then process their ends. It is quite difficult to shorten such blinds in width yourself, so in this case it is better to contact a specialist.

    Reducing the length of horizontal products

    Before shortening horizontal blinds, measure the parameters of the new opening several times. It is important to avoid mistakes in this process, since increasing the parameters of the canvas will be difficult, and in some cases impossible.

    If you need to reduce the height of the canvas, follow these steps:

    1. Move the product to the “Open” position. Release the retaining cord at the level of the lowest strip. It can be untied or simply cut off.
    2. Pull the rope out to the level by which you need to reduce the height of the canvas.
    3. Remove all excess blind strips from the structure. When the canvas is adjusted to the required height, secure the cord under the lower lamella. Do this work very carefully, since in the process of removing the strips you can move the strips you need. To return them to their original position, you will have to tinker.

    This completes the reduction in the length of the blinds. To prevent the cord from fraying during use, treat its edges with the flame of a lighter.

    Learning to shorten blinds (horizontal and vertical) (13 photos)

    After remodeling the interior and replacing standard windows with new, original window openings, many people think about how to use existing curtains and adjust them to size. Without bothering yourself with a visit to a specialist, you can consider how to shorten blinds at home, saving time and money.

    In recent years, blinds have been actively used in interior decoration. The main purpose is to reject direct sunlight and at the same time reduce high temperature in the room. The variety of materials is great, which allows them to be used in various rooms, kitchens, children's rooms or bathrooms. Design samples using blinds change the usual environment and update the interior. This is a fairly simple design of horizontal or vertical strips, which are made not only of fabric, but also of plastic, metal and wood. Using the cord, you can adjust the angle of inclination, move or rotate the slats.

    Advantages over vertical

    The horizontal model is distinguished from its vertical counterpart by a number of advantages:

    • Firstly, the scope of implementation of horizontal curtains is quite large. Along with classic window models, there are also attic ones (installed on ceiling windows), and also interframe ones. The latter are mounted, mainly, on wooden windows between the frames, allowing one window sash to be opened, then another.
    • Secondly, the materials from which horizontal blinds can be made are extremely diverse. If the vertical ones are made mainly of fabric, then the horizontal ones are made of aluminum, plastic, wood, bamboo, fabric.

    For example, pleated blinds are also of the horizontal type due to their own lifting mechanism, but they are most often made of woven material and differ from ordinary horizontal blinds . Pleats are a single piece of rigid fabric that perfectly protects the room from sunlight. Thanks to this material, this type of horizontal curtains can fit into any room design.

    Types of horizontal blinds.

    Horizontal blinds are easy to use and allow you to regulate natural light. When folded, they are quite compact and take up little space. Modern technology for coating lamellas is resistant to fading, which increases the solidity of the product.

    Aluminum curtains do not accumulate dirt or static electricity and are easy to clean.

    Wooden or bamboo blinds are environmentally friendly, durable and will decorate any interior.

    Plastic samples compare favorably in their resistance to high humidity and budget cost.

    Learning how to shorten horizontal blinds.

    The mechanism is quite simple and it is possible to shorten horizontal blinds by following the recommendations. The device of the horizontal instance is assembled from the following components:

    • Bracket with fastening to the window opening;
    • The main cornice holding the system;
    • Lamels (strips);
    • Raising and lowering mechanism;
    • Rotating bar;
    • Cords for raising slats.

    Before changing the design parameters, it is necessary to prepare the tool for work and measure the window opening for the exact size of the type of curtain being manufactured. You will need scissors, a hacksaw, a pencil, and sandpaper.

    The principle of action on how to shorten horizontal blinds in height is not complicated and, with the coordination of step-by-step instructions, you can easily change the length of the product:

    • Open the bottom strip;
    • Remove the knots on the control cords and remove the plastic clips;

    • Carefully pull the control cord above the specified level;
    • Carefully remove excess strips, moving them to the side, without changing the symmetry of the main structure;
    • Pull the parts of the ladder from the removed slats into the fastening hole and secure;
    • Put on the fasteners, fasten the cord knots, remove excess residue;
    • Place the bottom bar in place at the required length.

    Features of vertical blinds.

    Vertical blinds refresh the design, harmoniously connect interior items into a single image and visually pull the walls up. When choosing curtains, you need to decide what material they are made from and where they will carry the functional load. Various materials are used in the manufacture of vertical blinds.

    Common breakdowns and causes of their occurrence

    If the operating rules are followed, horizontal blinds can last more than 15 years, but sometimes some parts or mechanisms fail before this period. Common faults are caused by improper care or use of blind systems.

    Most often, owners of horizontal blinds encounter the following problems:

    • breakage of hooks or latches;
    • the control cord is frayed or torn;
    • the lifting and turning mechanism may fail;
    • The curtain rod may break.

    In addition, often immediately after purchasing ready-made blinds, it becomes necessary to adjust the length of the canvas. More often it has to be shortened, which is much easier to do. But sometimes when moving or changing the installation location of the structure, the canvas has to be lengthened. This can also be done if you have spare strips.

    Learning to shorten vertical blinds

    From an aesthetic point of view, it is more advantageous to shorten the lamellas in the upper part. In case of sloppy work, the flaws will be hidden behind the cornice.

    It is possible to shorten the blinds in length if you have scissors, a ruler, a simple pencil, matches and an iron.

    • Before starting work, you need to measure the required length of the product, taking into account the gap between the window sill or floor of 15-20 mm;
    • Carefully remove the plastic runners from the blind strips, trying not to damage the elements;

    • Remove the strips with hook eyes from the bases of the slats;
    • Measure out the same length and cut off the excess parts of the strips with sharp scissors, treating the cut with fire to preserve the fabric;
    • Fold the edge of the lamella and iron it with a hot iron to fix the fold;
    • In the center of each panel, create a small hole for the ears;
    • Reassemble the structure in reverse order.

    It is advisable to give expensive specimens or those made of valuable wood to professionals for reconstruction. Special equipment and the experience of the craftsmen will shorten the curtains in the required time frame and will not cause damage.

    How to trim slats?

    Cutting the slats

    Having measured the required height with a tape measure, we trim each detail with scissors, leaving some of the fabric for the lapels. From each cut top we take out a plastic eye. We bend the part left for the lapel, make a cut in the center of the fold with a stationery knife, and insert the eyelet. Glue the edge with Moment glue.

    Interesting materials:

    When will the update be released on Redmi 5? When will the updated Duster be released in Russia? When will the updated Duster be released? When will the updated Rav 4 be released? When will Rav 4 come out? When will the w213 restyling come out? When will the new Niva 4x4 go on sale? When will the new Duster go on sale? When will the new Renault Duster go on sale? When will Vesta be released on automatic?

    Shortening the blinds

    When starting the shortening procedure, you should take into account that blinds come in several types: vertical or horizontal, and also that reducing the size of this product has its own characteristics.

    Shortening horizontal blinds

    Let's look at how to shorten horizontal blinds and what is required for this.

    Horizontal products are slightly different in design, but just like the vertical type they contain the following elements:

    • brackets for mounting to the wall;
    • common cornice;
    • panels or slats;
    • lifting mechanism;
    • handle for turning;
    • cord for vertical movement.

    To shorten blinds, you first need scissors.

    The slats can be made of aluminum, plastic or wood. In order to reduce the length of horizontal blinds, the first tool you will need is scissors.

    Before starting work, measure the required length of the panel. The plugs on the bottom bar are opened, then you need to untie the knots on the restrictive ropes and remove the clamps.

    We shorten it: remove the excess slats, then put on the clamps and tie the knots.

    We remove excess slats, put on fasteners, tie knots

    Reduce the length of the lifting cords. Now you can put the bottom bar back in place.

    In accordance with these instructions, the height is shortened.

    To reduce the width, remove the side cover of the cornice. We saw off the cornice to the required size with a hacksaw and return the lid to its place.

    We cut the slats to the width of the cornice. It is preferable to entrust the adjustment of the length of expensive models to professionals.

    Shortening vertical blinds

    Before shortening vertical blinds, let's look at their design.

    This product consists of several elements:

    • load-bearing and decorative cornice;
    • runners from which the canvases are suspended;
    • lower connecting chain;
    • weights to create weight for the canvas;
    • chain or control cord, slats.

    Canvases can be made of fabric, plastic, aluminum or bamboo. To learn how to shorten blinds, watch this video:

    In order to shorten vertical blinds, you need simple tools:

    • a hacksaw or fine-toothed saw;
    • crosshead screwdriver;
    • scissors or painting knife;
    • tape measure and ruler;
    • matches or lighter;
    • iron;
    • pencil.

    Replacing the connecting chain

    The bottom chain consists of small plastic balls through which a fishing line is threaded. If handled carelessly, it breaks quite often, but replacing it with a new one will be very difficult.

    The procedure is as follows:

    1. We purchase a new part from a specialized store, having previously calculated its length. To do this, you need to measure the width of one lamella and multiply it by their total number.
    2. Then, without removing the blinds from the cornice, we remove the damaged chain and insert a new one in its place.


    When replacing the connecting chain, the balls are inserted into the grooves on the weight bars

    General sequence of work

    The process of shortening vertical blinds includes the following steps:

    1. It is necessary to lay out the finished product on the floor and start working from the top and from the side where the lifting mechanism is located.
    2. Remove the side cover by carefully prying it up with a knife and unscrew the fixing screws.
    3. We remove the runners from the cornice and from the canvases. The sliders are made of plastic, so when handling them you need to be especially careful and not apply significant force.
  • We measure the length of the curtains and determine how much they need to be cut; the distance from the bottom edge to the floor should be at least 1-2 cm.
  • We cut all the panels to the required length with scissors or a paint knife, while it is necessary to leave a certain length for tucking, as a rule, it is 2-3 cm. To prevent the cut of the synthetic fabric curtain from fraying, it can be melted over a fire using matches or lighters.
  • We tuck the edges of the panels. The folds of synthetic fabric can be fixed with an iron or glue. In the middle of the canvases it is necessary to make holes for the ears. A strip is attached to each panel, then all components are attached to the cornice.
  • If you need to reduce the width of the blinds, this can be done when the side cover of the cornice is removed. If necessary, the cornice strip can be shortened by sawing off with a hacksaw and installing the elements in the opposite direction.

    In order to shorten panels made of aluminum, plastic or bamboo without damaging them, you need to contact specialists. See this video for details on shortening vertical blinds:

    You can reduce the length and width of horizontal products with your own hands. To do this, remove the suspensions, saw off the cornice and panels to the required size, and then assemble everything in the reverse order.

    Size doesn't matter

    Unlike traditional curtains, they are attached directly to the frame or top slope. The canvas tightly covers the glass, protecting it from the scorching sun and prying eyes. If desired, a roller blind can be hung over open cabinet shelves or a doorway.

    Manufacturers offer a variety of models. The format of standard roller blinds is 200x180 cm, large ones - up to 350x4.5 m. They are mounted on the upper slope or higher, on the wall. Mini-cassettes are long - 2.2 m, and narrow, with a minimum width of 0.7 m. Guides for the canvas are mounted on their sides. In such designs, the canvas does not sag. Attic doors with a spring liner close automatically.

    Shortening the blinds

    When starting the shortening procedure, you should take into account that blinds come in several types: vertical or horizontal, and also that reducing the size of this product has its own characteristics.

    Shortening horizontal blinds

    Let's look at how to shorten horizontal blinds and what is required for this.

    Horizontal products are slightly different in design, but just like the vertical type they contain the following elements:

    • brackets for mounting to the wall;
    • common cornice;
    • panels or slats;
    • lifting mechanism;
    • handle for turning;
    • cord for vertical movement.

    To shorten blinds, you first need scissors.

    The slats can be made of aluminum, plastic or wood. In order to reduce the length of horizontal blinds, the first tool you will need is scissors.

    Before starting work, measure the required length of the panel. The plugs on the bottom bar are opened, then you need to untie the knots on the restrictive ropes and remove the clamps.

    We shorten it: remove the excess slats, then put on the clamps and tie the knots.

    We remove excess slats, put on fasteners, tie knots

    Reduce the length of the lifting cords. Now you can put the bottom bar back in place.

    In accordance with these instructions, the height is shortened.

    To reduce the width, remove the side cover of the cornice. We saw off the cornice to the required size with a hacksaw and return the lid to its place.

    Classification

    Currently there are three types available:

    Each of them has its own characteristics. Since all types have their own characteristics, but in general are similar to each other, they are all very common. Height blinds are used both in domestic and apartment premises, as well as in industrial ones. Blinds are made at the factory, but they can be shortened at home.

    Vertical

    In order to shorten such things as vertical blinds, you will need the following tools:

    • hacksaw/power saw;
    • screwdrivers;
    • scissors;
    • folding meter.

    Shortening

    The very shortening of such things as vertical blinds takes place in a number of stages:

    1. The cornice should be turned over to the side where the part in the form of a side strip is located, where the rod of the lifting device is located.
    2. You should start cutting on the right (where the lid is located in the cornice).
    3. Next, you need to remove the part in the form of a side cover by carefully prying it with a knife and unscrewing it with a screwdriver.
    4. After these steps are completed, a clear measurement of the new length of the fabric is usually taken.

    5. In turn, tuck the base and cut it according to measurement.
    6. Then, you should shorten the bar at the bottom and remove it completely from the system.
    7. On the left side of the curtains, use a hacksaw to shorten the base, and insert the removed strip in place of the cut.
    8. The next step is to install the cord on the vertical blinds.
    9. Then, remove the part in the form of a bracket, determine the desired size of the product and trim the fabric.

    It is important to note that the width of the canvas must match the length of the cornice.

    So, if you have the required equipment and specialized skills, anyone can cut vertical products in a high-quality manner with their own hands, without the involvement of a master.

    Horizontal

    Horizontal blinds should be shortened in a different way than vertical blinds. It is worth laying out the material on a table or other straight plane. The first thing to shorten is the direction and system of the cornice, so you need to remove it from below and cut the cord. Once this is completed, remove the unnecessary strips of fabric and return the truncated cornice to its place.

    General sequence of work

    The process of shortening vertical blinds includes the following steps:

    1. It is necessary to lay out the finished product on the floor and start working from the top and from the side where the lifting mechanism is located.
    2. Remove the side cover by carefully prying it up with a knife and unscrew the fixing screws.
    3. We remove the runners from the cornice and from the canvases. The sliders are made of plastic, so when handling them you need to be especially careful and not apply significant force.
  • We measure the length of the curtains and determine how much they need to be cut; the distance from the bottom edge to the floor should be at least 1-2 cm.
  • We cut all the panels to the required length with scissors or a paint knife, while it is necessary to leave a certain length for tucking, as a rule, it is 2-3 cm. To prevent the cut of the synthetic fabric curtain from fraying, it can be melted over a fire using matches or lighters.
  • We tuck the edges of the panels. The folds of synthetic fabric can be fixed with an iron or glue. In the middle of the canvases it is necessary to make holes for the ears. A strip is attached to each panel, then all components are attached to the cornice.
  • If you need to reduce the width of the blinds, this can be done when the side cover of the cornice is removed. If necessary, the cornice strip can be shortened by sawing off with a hacksaw and installing the elements in the opposite direction.

    In order to shorten panels made of aluminum, plastic or bamboo without damaging them, you need to contact specialists. See this video for details on shortening vertical blinds:

    You can reduce the length and width of horizontal products with your own hands. To do this, remove the suspensions, saw off the cornice and panels to the required size, and then assemble everything in the reverse order.

    Types and sizes of roller blinds

    Manufacturers offer a huge range of roller blinds, from which you can choose products of any size and for any window. But still, sometimes situations happen that the line of roller blinds offered by the seller does not have the right size for your windows.

    This usually happens if the building design included windows of non-standard sizes or the size grid of the roller blinds you like is limited and does not contain a model suitable for you.

    In this case, there are two ways out of the situation:

    • Order individual tailoring of roller blinds. The most convenient solution to the problem. With minimal effort on your part and without any hassle, you will receive roller blinds that will fully meet your expectations and the dimensions of the window opening. But this method has a significant drawback - the high cost of the finished product.
    • Buy a sun protection system that is as close as possible to the required size, but a little larger, and trim the roller blind yourself. If you decide to do this, you will need to make some effort and spend a little personal time, but the curtains will not cost you much.

    The following types of roller blinds are available for sale:

    Their feature is an open shaft, which is not protected by anything. Such roller blinds are inexpensive, take up little space, and can be mounted above the window opening or on each window sash. The maximum width of the canvas is 1.8 m, height – 2 m.

    Roller blinds of this type are equipped with a plastic box that hides the rotating shaft and protects it and the wound fabric from dirt and accidental damage. Another difference is their small size. The width of the canvas starts from 0.7 m, while the length does not exceed 2.2 m.

    These roller blinds are available in lengths up to 4.5 m and widths up to 3.5 m and are ideal for large window openings, such as panoramic windows or wide windows in office buildings.

    Attic roller blinds are designed for installation on sloping windows. To ensure a tight fit to them, they are specially equipped with side guides that hold the canvas along the window sashes. Their height is no more than 2 m, width is no less than 0.7 m.

    Tips on how to shorten vertical or horizontal blinds

    Many housewives are wondering how to shorten vertical or horizontal blinds if the length, height and width of the window changes after renovation? The same question arises if their length, width and height are standard, but the window in the house is non-standard. It is recommended that you learn more about how to shorten horizontal or vertical blinds without using the help of a professional.

    How to shorten vertical blinds

    Depending on the type of blinds, their size may need to be adjusted; the length, width or height may be shortened. For example, if the product is made of metal, you can use a screwdriver and scissors. If the material of the product is different, other devices will be needed to shorten the blinds.

    How to shorten vertical blinds? And what might be needed for such a painstaking procedure? In order to independently shorten curtains at home, you may need special tools that may not always be in the owner’s arsenal. Therefore, many people prefer to turn to those people who know how to do this.

    The width of such a product is shortened due to the fact that the cornice is cut. For visual harmony, it is necessary that the length of the cornice exceeds the size of the window. Using a tape measure, measure the required size of the product, and use a pencil to mark the specified size. After this, the blinds previously removed from the window are directly shortened (photo). To shorten the cornice, you will need such devices as a hacksaw or grinder and a grinder (with which you can smooth the edge of the product).

    You will also need tools such as a tape measure and a screwdriver. Trimming the cornice should be carried out in the place where the lifting device is located. To shorten the blinds, unscrew the side cover using a screwdriver, move the cord to the side, and cut the product, the length of which has been previously marked. The cut is carefully trimmed, hooks unnecessary after trimming are removed and the cord and chains are shortened. After the manipulations are completed, the side cover is attached back and the blinds are hung on the window. This way you can shorten the length of the blinds.

    If you need to shorten the width of the blinds, the slats should be removed from the hooks. Next, remove the strips with fastening devices. After preparation, you can begin the actual shortening procedure. To prevent the fabric from fraying after cutting, it is recommended to burn the edges of the strips with fire. Trimming is carried out, preserving the supply of fabric, since you will additionally need to make a hem; fasteners will be hidden in it, so the supply of fabric should be about four centimeters.

    The fabric in each strip must be folded, holes drilled for fasteners, and then the strip secured, having first wrapped it in fabric. Next, the lamella with fasteners is stitched or fixed with glue. After the glue has dried, you can already assemble the structure and hang it on the window. This is how you can shorten the blinds (in the video). The process of shortening horizontal or vertical curtains differs in its features and execution algorithm; different tools will be required.

    How to trim a cornice?

    In order to shorten a double-row ceiling cornice with rotating elements, you need to carefully, holding the decorative hood, disassemble it on the side you need, move the hood, remove the rotating element and saw off the extra piece of the profile.

    Interesting materials:

    How many nationalities live in Bishkek? How much personal income tax for one child? How long should you not eat after training to lose weight? How many weeks are there in summer? How much should you not eat after cardio training? How long do quail eggs lay? How much is normal cholesterol? How many New Year's weekends are there in 2022? How long should you be in a calorie deficit? How long should you keep an indo-duck?

    Rating
    ( 2 ratings, average 4.5 out of 5 )
    Did you like the article? Share with friends:
    For any suggestions regarding the site: [email protected]
    Для любых предложений по сайту: [email protected]