Furniture roller shutters for closets on the balcony, in the bathroom and toilet, as well as for the wardrobe

What are furniture roller shutters

Such roller shutters are fastened slats that are removed by winding onto a shaft or extending beyond the wall (back or side). The operating principle is similar to window blinds.

Advantages and disadvantages

Such furniture blinds for closets are chosen because they have a number of advantages:

  1. They take up less space than standard doors and do not take up any space when opening. This explains the fact why roller shutters are chosen for a sanitary cabinet in a toilet or bathroom.
  2. Moves in different directions without creating excessive noise.
  3. The smallest size of roller shutters: 30*60 cm. There are no restrictions or standards, options are available for individual calculations.
  4. Availability of automatic control.
  5. Long service life and easy maintenance.
  6. Quick installation.
  7. The ability to design the product to your taste, which makes it not only a practical, but also a decorative element.

The disadvantages include:

  • high cost;
  • not all materials have the same strength;
  • excessive load on the load-bearing elements due to the mass of the blinds, if the structure is large.

Main types of structures

You can install roller shutters in cabinets on the balcony, in the bathroom and toilet, as well as for wardrobes and sideboards. You can use roller shutters instead of traditional screens, dividing the room into several zones.

Designs can be divided according to several criteria:

  1. Climb:
  • mechanical;
  • auto.
  1. Web movement:
  • vertical;
  • horizontal;
  • arcuate.
  1. Assembly of lamellas:
  • behind the back wall, winding it onto a roller;
  • for the side (twisting);
  • "harmonic".
  1. Installation:
  • into the opening: box outside or inside;
  • into the cover: box outside.

During installation, the fact is taken into account that if the box is located inside, the space used is reduced.

Profiles used

When choosing a profile, it is necessary to take into account its technological characteristics and the environment in which it will be used. Various materials are used to make blinds. They have different resistance to wear and mechanical stress.

If roller shutters are intended for a closet in a toilet, bathroom or on a balcony, it is recommended to choose an option that is resistant to moisture, corrosion and chemicals. When it comes to furniture roller shutters for the living area, more attention can be paid to the aesthetic side of the issue.

Foam-filled profiles

The advantages of foam-filled profiles include their light weight and low noise level when opening and closing the cabinet.

There are 2 series:

  1. PD belongs to economy class. This does not mean that such a profile is less reliable and loses in convenience to more expensive options. The weight of 1 m² is in the range of 2-2.1 kg, the area of ​​​​the canvas that can be covered is up to 7.3-7.8 m².
  2. AD is considered more durable and has a larger palette of colors. Heavier than PD (2.5 kg/m²), the largest canvas area is 6.2-6.8 m².

Sequence of work

The loggia cabinet with roller shutters is installed after the preparatory work. They check the levels of horizontality of the base and verticality of the walls of the balcony or loggia. Do leveling if necessary. Mark the cabinet parameters with a pencil.

Installing a built-in wardrobe:

  • for the ceiling and floor, rectangular edgings are made from timber, one above the other,
  • make the cabinet frame,
  • the side walls of the cabinet are attached to the vertical bars,
  • screw the floor slab,
  • install the ceiling slab of the structure,
  • an internal partition is screwed to the floor and ceiling slabs,
  • install shelves,
  • install roller shutters on the balcony closet according to the instructions that come with the kit.


Ready-made wardrobe with furniture roller shutters

Additionally, you can provide for the organization of illumination of the structure by making a hole in the ceiling slab for the output of wires.

Roller shutters for the closet allow you to more efficiently organize space in a room for any purpose. This could be a corridor, a balcony, a kitchen, etc. In fact, this design is a separate type of blinds. And it is made of plastic, metal (aluminum, steel), wood. Roller shutters for closets significantly save space, especially when it comes to small rooms where it is not possible to install furniture hinged doors.

Preparatory work

A sketch of the future cabinet design is drawn up. The best option is a configuration across the entire width of the balcony or wall, depending on the room in which installation is planned. At this stage, the number of shelves is calculated.

Using the building level, the horizontalness of the floor and the verticality of the wall surfaces are checked. If necessary, you need to do the alignment yourself. More often this is required on the balcony. If roller shutters of different types for closets are installed in a living space (corridor, bathroom, kitchen), usually the walls and floor are already level.

Installation instructions

To obtain an effectively functioning structure, the following sequence of actions should be followed:

  1. Markings are made and a wooden frame is mounted on the floor and ceiling of the room. The back wall is attached.
  2. The sidewalls are installed using screws to the finished frame.
  3. The bottom and ceiling are equipped.
  4. Illumination is installed in cabinets with different types of roller shutters. The wires run between the ceiling slab and the balcony slab.
  5. If you plan to make a partition inside the cabinet, at this stage you can begin installing it.
  6. Shelves are being installed.
  7. Furniture roller shutters are installed where the door in the closet is usually located.
  8. The guides must also be fixed to the rear wall of the finished structure.

It is recommended to cover the cabinet with paint and varnish, which will increase the safety of its operation.

What you need for work

Roller shutters are installed in a closet (corridor, balcony) with your own hands. To make such a structure, you need to prepare the following materials:

  • wooden beam (40x40 mm), quantity determined by cabinet configuration: 4 pcs. for frame + 2 pcs. for partition, 4 pcs. for mounting to the ceiling and the same amount for mounting to the floor;
  • 2 laminated chipboards, dimensions determined by the height of the room where the cabinet with plastic roller shutters will be installed;
  • fastening elements for shelves;
  • sheet material (for example, hardboard) that will be used as the back wall of the structure;
  • small fasteners: dowels, nails, screws;
  • furniture roller shutters selected by design.

When you do the work yourself, you need to take care of the tools. The set should include:

  • drill, and you need to prepare drills for wood and concrete;
  • screwdriver;
  • hammer;
  • hacksaw;
  • building level;
  • roulette.

It is better to make marks with a pencil; a ruler is also useful in this work. You can do the markings yourself, but cutting the material should be done by a professional, which will reduce the likelihood of chipping.

Main types of construction

Furniture blinds differ in their location in the main body. Parts of horizontal sheets are fixed at the top and bottom of the cabinet, and the height can reach more than 2 meters. The designs differ in the order of installation. Built-ins are used in furniture making, and overhead blinds are easy to make by hand. With the help of both, you can decorate new furniture or update old ones. This furniture design can be made from various materials. For manufacturing, they usually use plastic, polypropylene, aluminum, and rarely wood and glass. Wooden blinds are not often used due to their limitations for use in wet areas such as bathrooms. In addition, there is a high risk of damage to this material. But you can choose a plastic product with a color and texture that imitates wood.

The moving part of the façade consists of profiles or strips. Their size allows you to correctly calculate the necessary spare parts needed to fill the hole in the cabinet. The design has sufficient flexibility and special locks. They are responsible for the durability of the blinds and prevent them from falling apart into elements. If the blade is long, a special mechanism is needed for stability. In other cases, the device is equipped with a profile, handles, decorative stripes, angles of rotation of conductors and connectors. Some models have a special drum that should be used to wind the facade.

Interestingly, just like garage doors, custom blinds can open completely automatically. For this purpose they are equipped with an electric drive.

Types of furniture blinds

Furniture blinds are made of metal, plastic, thick textiles, glass and wood. Wooden products are installed quite rarely due to the limited scope of application. For example, they are not suitable for the bathroom, because there is high humidity. This material is also easy to damage.

Roller shutters for the closet are available: horizontal and vertical. In horizontal blinds, guides are attached at the top and bottom. The height of these products can be more than 2 m.

There are three ways to roll up and open closet shutters:

  1. By screwing onto a shaft that is located vertically or horizontally;
  2. By tightly hiding the slats behind the cabinet wall;
  3. In a way that is called “accordion”.

There are 3 types of mechanisms for opening roller shutters:

  • Electric;
  • Spring-inertial. It allows you to easily raise and lower blinds. The slats move quickly and silently. Basically, closet blinds weigh little and are small in size, so they are controlled by a manual drive;
  • Tape. This mechanism is also very convenient, but its price is very high.

Office furniture is often equipped with deadbolt locks for storing documents and other things.

Based on the type of installation, a distinction is made between built-in and overhead lamellas. The first option is used in the furniture manufacturing process, so inserting roller shutters into an already manufactured body is quite difficult. To do this, you need to cut grooves for inserting lamellas. And overlay panels are easy to make yourself.

Manufacturing materials

The most common materials for furniture roller shutters for closets are wood, plastic and metal.

Metal

Standard metal slats are in most cases made of aluminum. This metal has a number of advantages:

  • resistant to corrosion and temperature changes;
  • withstands many years of use, maintaining its original appearance;
  • reliably protects against burglary;
  • easy;
  • has a natural silver color, although the product can also be painted;
  • Suitable for different design styles.

If you fill aluminum slats with insulation, they can be used as insulation.

Plastic

Plastic remains the most popular finishing material because... with its help you can realize many design ideas: imitate wood and other natural materials.

Plastic roller shutters will prevent moisture and dust from entering the closet.

For better sound insulation, they are filled with non-woven fabric.

Made of wood

Wooden shutters are the most expensive element. They are not stored ready-made and are only available to order. These roller shutters look stylish, but are suitable for use only in places where they will be reliably protected from moisture.

Primary colors

Standard colors are white, grey, brown, beige and silver. However, modern technologies make it possible to paint the finished product in any color.

How to choose furniture blinds

When choosing blinds, you need to carefully consider some important points. Tips for choosing roller shutters:

  1. The material of the products should be chosen taking into account the style of the premises in which the blinds are planned to be installed. For example, glass roller shutters are perfect for a modern kitchen interior. They can also withstand heavy loads, are scratch resistant and look original. Aluminum roller shutters are good for a high-tech living room. Made of wood for the bedroom;

  2. It is recommended to inspect the opening mechanism and guide elements very carefully. The quality and reliability of these parts ensure convenient and durable use;
  3. First, it is worth deciding whether it is necessary to install a lock in order to lock the roller shutters. If additional protection is necessary, then you need to choose a design where such a system is provided by the manufacturers. And also for protective purposes it is better to choose metal blinds;

  4. If the requirements for furniture roller shutters regarding operation and aesthetics are quite high, then for their installation you should contact a professional to prevent damage to the appearance and functional perfection of the structure.

It is really very convenient to use furniture equipped with blinds. The use of roller shutters for furniture in the office or at home is a justified way to improve the furnishings.

Scope of application of blinds

Any concrete or plasterboard niches in the house can be equipped with stylish blinds. In addition, roller shutters are most often used on the following types of furniture:

  1. Wardrobe, cabinet, rack, set in a living room. Blinds are also used in the office, bathroom, and balcony. In this case, roller shutters are selected based on the interior style and furniture colors. They save a lot of usable space;

  2. Kitchen furniture. In addition to aesthetic beauty and convenience, in this case, roller shutters for the closet are used mainly for sanitary and hygienic reasons;

  3. Furniture items for medical institutions and catering establishments. Aluminum roller shutters are often used here because they are very convenient to wash and clean, thereby maintaining the necessary hygiene. Plus, such slats can be equipped with a reliable locking system. This is important if it is necessary to restrict access to certain medicines;
  4. Shelving in the utility room (attic, pantry, attic). In such places you also need to save space, so roller shutters are perfect in this case too. It should be taken into account that, in general, in these rooms the furniture façade is not a key parameter, so in order to cover the furniture, it is better to make blinds yourself.

Based on the above, obviously, there is a huge range of furniture items where roller shutters can be successfully used.

Review of furniture blinds and roller shutters (9 photos)

Furniture blinds are a very convenient and aesthetic way to cover cabinets and cabinets, dressing rooms and niches, serving tables and shelves, technical and medical furniture.
Such modern blinds are often used in the interiors of offices, apartments and public spaces. Furniture blinds are very popular due to their high functionality and ease of use.

Another important advantage of furniture blinds is that they save up to 30% of usable space compared to hinged doors. Well, this is not the entire list of advantages of furniture blinds.

What is their feature? What are the varieties of this interior detail? How to choose suitable furniture blinds?

What furniture are they used in - 3 common options

It is simply impossible to list all the furniture and all the places where blinds are now installed, so we will consider only the main directions.

Option number 1: kitchen

Roller shutters are installed on kitchen furniture more often than on any other furniture. Theoretically, all the doors in the kitchen set can be replaced with blinds, but in this case your kitchen will look more like an office. This option is good if the kitchen is small and the hinged doors are inconvenient to open.

It is advisable to install roller shutters made of glass, plastic or metal in kitchen units.

It’s a completely different matter when blinds are installed on 2 – 3 cabinets and only as needed. For example, it makes sense to cover the cabinet above the hood or oven with curtains. Moreover, only metal, glass and plastic are used in kitchen sets.

Option No. 2: hallway

It's rare that a city apartment can boast a spacious hall. Accordingly, roller shutters are ideal for saving space. In this case, blinds can be installed both on individual sectors of the cabinet, and to cut off part of the room for a built-in wardrobe. True, using such a cabinet is not very convenient.

Instead of bulky furniture, you can cut off part of the narrow hallway with plastic roller shutters.

In hallways there are often closets with doors equipped with wooden blinds. If the design allows, then the solution is excellent, because in the off-season, wet outerwear will dry out and the closet will be closed.

Doors with wooden louvers will provide good ventilation in the closet.

How to make rotating wooden blinds

Topics related to making furniture yourself, as well as carpentry, are of increased interest among users of our portal. The topic of this article will be photo instructions for making rotary blinds from wood from a portal user with the nickname QWEsad.

I have long been planning to make wooden blinds, and in the first place I put not functionality, but the beauty of the blinds, which are part of the interior. Such designs are widespread in North America and can be purchased at any hardware store. I had never seen similar wooden blinds in Russia, so I decided to make them myself.

Let’s say right away that 3 years passed from the idea to the realization of the dream in the “tree”.

The lack of time and the user’s busyness with other things affected it. What ended up happening is shown in the following photo.

The result is more than impressive, so let’s take a closer look at the process of making wooden blinds with your own hands. In addition to drawings with detailed dimensions of the blinds, which the user calculated on the Internet, materials (well-dried boards) and tools for carpentry will be required. These are, first of all, special devices for drilling holes in workpieces.

And also cutters for lamellas.

The user also purchased all of the above-mentioned equipment on the Internet, although now, due to rising prices, he would have made the drilling jig himself.

Repeated blinds can be: blind or with a rotating bar to change the angle of inclination in the center of the slat or on the side, as well as with different slat widths:

It was the latter option that QWEsad settled on, deciding to use pine boards, widely used in “carpentry,” as a basis, and upon completion of the work, tint the blinds white. You can also use different types of wood to match the color of the finish. It all depends on the imagination of the master and the availability of certain materials.

The first thing you need is well-dried wood. To produce lamellas with a thickness of 9.5 mm and a width of 63 mm, trimmings of timber measuring 10x10 cm and 10x15 cm were used.

The wood lay in the attic for several years and dried perfectly naturally. Humidity did not exceed 6-7%. I will also say that the lamellas, which are 90 pieces, did not twist or warp over time, although there were knots on some of the blanks.

The timber was cut on a circular saw (don’t forget to leave a reserve for further processing), and then the workpieces were planed along the plane.

It was not possible to buy a ready-made rotating bar (due to the lack of a bar of the required size on sale: the user required 56 inches, but was offered only 54 and 36 inches).

QWEsad decided to make the rotary bar from plywood, 4 mm thick. After planing, the slats were milled, trimmed to size, and holes were drilled for attaching the turntable.

Source: www.forumhouse.ru

Cabinet assembly

Responsible and painstaking work on assembling the cabinet consists of the following steps:

  1. First, according to the drawing, you need to mark on the floor and ceiling of the balcony where the cabinet frame will be located, and attach a sheet of hardboard to the balcony wall to create the back wall;
  2. Attach bars at the top and bottom in the shape of rectangles to attach the sides;
  3. Screw the walls to the bars with screws;
  4. Secure the slab forming the cabinet floor;
  5. Screw the ceiling slab with a drilled hole to the upper bars, and run wires for lighting in the balcony cabinet into the gap between the ceiling of the cabinet and the balcony;
  6. Insert and screw the partition inside with a screwdriver using metal corners to the floor and ceiling;
  7. To maintain the shape of the cabinet, a strip is inserted and screwed into its left half;
  8. The required number of shelves is secured with corners using screws;
  9. Furniture roller shutters are installed according to the instructions in place of the proposed cabinet door. The canvas can be ready-made or in the form of separate parts that are connected to each other by hinges;
  10. To move the door leaf, the guides are fixed with self-tapping screws on the rear wall of the cabinet, and the correctness of their location is checked with a level.
  11. All wooden parts of the cabinet are painted or varnished, after which the structure is ready for use.

The roller shutter canvas, moving along the guides, is rolled into a roll. Roller shutters occupy part of the back wall. Especially when they hide in a special box if the back wall is pressed tightly against the wall or is occupied by something. They reduce the interior space of the cabinet.

When installing a cabinet on a loggia, it is enough to measure the distance between its walls in order to order furniture roller shutters for the cabinet and make shelves.

Manufacturing Features

A do-it-yourself balcony cabinet is installed on a loggia or closed balcony. It is recommended to glaze the open balcony and, if possible, insulate it. You should check how smooth the floor surface is and, if necessary, level it, then it would be good to finish the floor with tiles, linoleum or other material.

Determine whether the wall to which the cabinet is attached is level. If the surface has errors, level it by plastering. It is important that the frame of the cabinet, consisting of bars, its vertical elements are strictly vertical, and, accordingly, the horizontal elements are without gross errors. This is necessary so that the cabinet has the correct geometric shape and the roller shutters move freely along the guides and do not jam. Use waterproof materials for construction.

Features of the functioning of shutters

There are furniture roller shutters that can work vertically and horizontally. If the structure is not planned to be fixed, it is necessary to use a counterweight when installing the facade. Its role boils down to the fact that the doors open easily and are in a certain position when the curtains are not completely open (that is, they do not close spontaneously). Three types of mechanisms are used to open rollers:

  • with electric drive;
  • with belt or cord drive;
  • with spring-inertial mechanism.

The spring inertia mechanism makes it easy to raise and lower the device. It moves quickly over the tires without creating any noise. Most often, furniture casters are light in weight and size, and therefore can be controlled using a manual drive.

The cord mechanism is no less convenient, but its price is somewhat overpriced. Electric blinds are very convenient. Furniture often has a lock that is installed on the roller shutter. For safety, it is made completely lockable.

Advantages of an opening device

Now it is fashionable to replace office doors, balcony openings, dressing rooms, and various niches with furniture roller shutters. Previously, this problem was solved with the help of fabric curtains, but now it is blinds that not only cope with their main role, but can also serve as room decoration and perform a number of other useful tasks. Furniture blinds are a kind of design made of panels connected to each other. If you use such curtains instead of a door, you can open them to the side or up. Also, thanks to this innovation, owners of small apartments have the opportunity to save significant space by placing furniture in a narrow corridor or along the walls. The shutters can be easily opened in any position, providing easy access to the inside of the cabinets.

You can purchase a finished product, order it according to your project, or make it yourself.

The undoubted advantages of curtains for furniture include flexible guides with which the canvas can move in any direction. Different colors allow you to replace furniture and doors in rooms, decorating them in any style.

But such blinds also have one drawback: if even one slab is damaged, the entire structure will have to be replaced.

Furniture curtains are easily made from wooden panels and fabrics. In small rooms where hinged doors only take up extra space, furniture shutters significantly reduce it. Thus, shutters on furniture have obvious advantages:

  1. Opening upwards or sideways on one side. This distinguishes them from doors that take up 40% more space.
  2. Firmly fixed in a given position.
  3. Provide access to deep cabinet corners.
  4. Convenient to open.

Important benefits

Furniture blinds that are built into cabinets, sets and cabinets are called furniture roller shutters. They are a structure of lamella panels interconnected. Since all panels have a standard size, you can easily calculate how many of them will be needed to fill a certain niche. Their main difference from ordinary doors is that they can open upward or to the side, rather than outward. This saves a lot of space in small rooms. You can easily place furniture in narrow corridors and along walls, because there is always a guarantee of free access to drawers and cabinet shelves.

The canvases are quite easily fixed in different positions. Thanks to this, the interior space of the cabinet is always accessible, which provides additional comfort of use.

The flexibility of the design is ensured by special locks that create strength and do not allow the roller shutters to fall apart.

Another important advantage of this type of blinds is the very flexible guides, which allow the door to easily move along given trajectories.

Thanks to the varied color range of designs, they can easily fit into any interior style.

The only drawback of these furniture blinds for the closet is that if one of the panels breaks, it will be necessary to replace the entire product.

But such lamellas are quite easy to make with your own hands; all you need is a wooden panel and thick fabric.

Mounting options

You can install roller shutters on the closet yourself. However, if you do not have special skills, it is better to invite professional workers who will quickly and accurately install a structure that will last for many years.

Overhead

With this option, the guides along with the box are located outside. At the same time, all useful space inside the cabinet is preserved.

Built into the opening

The box and guides in this case form a frame. If communications are located inside the cabinet, it is recommended to move the box outside so that the structural mechanisms can move freely.

Control options

Controls in a cabinet with roller shutters can be installed mechanical or automatic. The latter option is convenient in large-sized structures, because frees you from physical effort when opening roller blinds.

However, there are options in which it is more rational to use a mechanism called an inertial spring.

We are talking about blinds installed in places where they perform an aesthetic function or are installed to save space: to hide plumbing communications in the toilet, to compactly place things on the balcony, etc.

The spring is built into the roller shutter shaft and is wound so as to balance the curtain when raising and lowering. Thanks to the spring, manual control of lifting the blade with any weight becomes quite easy. The spring tension is adjusted when assembling the roller shutters and checked during installation.

Prices, calculation examples

For example, you can take shutters measuring 500*800. If you choose a budget PD profile with foam filler, an inertial spring mechanism and a latch, it will cost 6,300 rubles. Additionally, you need to pay transportation costs and installation services.

Blinds of the same size, but with an electrically controlled anti-vandal AR profile will cost from RUB 22,203.

The final cost is announced after all details have been discussed with the client. In order to obtain a high-quality design, it is recommended to contact specialists who have a well-functioning design and installation calculation scheme. This will save time and money.

Tips for selecting a product

Blinds on the door help create a comfortable and original interior of the room. How not to make a mistake in choosing this interior detail:

  1. The material of the product should be selected in accordance with the style of the room. Glass blinds fit perfectly into the interior of a modern kitchen. In addition, they can withstand heavy loads without scratching and look impressive. Aluminum blinds will look harmonious in a living room decorated in a high-tech style, while wooden blinds are better suited to a classic bedroom.
  2. If you want to install curtains with anti-burglary features, for example, in a cabinet where securities are stored, choose a metal model.
  3. When choosing a design, pay attention to the quality of the guides. If they are not properly attached, the fabric will not move freely.
  4. If you purchased a roller shutter, but cannot install it on furniture yourself, contact a specialist.

So, if you want to change the design in the room, you don't have to spend money on new furniture. It is enough just to make minimal efforts and install blinds to decorate the facade. Furniture blinds fit into any interior, help save space and highlight the overall style of the room.

Furniture roller shutters are a type of blinds that perform a decorative and protective function. They reliably hide the capacity of a closet or chest of drawers from prying eyes and do not create difficulties in installation and subsequent maintenance. To install roller shutters, you can seek the help of a specialist or do it yourself. The last option is most preferable for those who want to save time and money.

Required tools and materials for installation:

  • drill and the required drill diameter,
  • screwdriver,
  • level,
  • hammer,
  • marker,
  • roulette,
  • silicone sealant.

Buy or make it yourself?

There are three options for solving the issue of installing a cabinet with roller shutters on the loggia.

  1. Make a drawing. Select the elements yourself or buy them in the store. Buy roller shutters and install them yourself according to the instructions . The most budget option.
  2. Buy a ready-made cabinet and order installation by specialists, or assemble such a cabinet yourself, saving money. In this option, it may be that you have to purchase a cabinet that most of the presented assortment satisfies individual requirements, but in some ways is not entirely satisfactory.
  3. You can order the production of a balcony cabinet with roller shutters and installation by specialists. The advantage of this option is that it is individually designed for specific requirements. The most expensive way.


Roller shutters fit harmoniously into the interior of the loggia and help save space

The decision to make the structure yourself or buy a ready-made balcony closet with roller shutters depends on the willingness to spend a larger or smaller amount of money, and the creative inspiration to make the structure yourself.

From our separate article you will learn how to make a balcony cabinet from plasterboard and what you will need for this.

To extend its service life, it is recommended to install the cabinet on a warm balcony. Read here how to insulate a balcony from the inside with your own hands.

Instructions for making your own folding balcony table are on this page of the website https://balkonsami.ru/interer/mebel/otkidnoy-stolik-na-balkon.html. If desired, anyone can make such a table.

We model, design with our own hands - drawings.

The height of the product is determined by the customer, the most advantageous options are from floor to ceiling with separately closing sections and mezzanines, or a cabinet from floor to window sill (to the glazing level).

Various combinations of cabinets with horizontal surfaces used as a table or shelf are possible.

The thickness of the shelves installed in cabinets can vary depending on the expected load.

You can order both hinged and sliding doors for individual sections, as well as their combination in one design.

How to make blinds from fabric and wood with your own hands: step-by-step instructions

The laconicism and practicality of fabric blinds makes it possible to harmoniously fit them into any interior. But the key factor in their popularity is the excellent performance of their direct functions of protection from sunlight.

This type of curtains is also irreplaceable in darkened and limited areas. The simple design allows you to open the window space as much as possible, letting in natural light, thereby visually expanding the room.

Advantages of DIY blinds

Self-made blinds have a number of advantages over ordered products from a professional company and, with a constructive approach, are in no way inferior in quality:

  • Possibility to use parts that match the window design;
  • Selecting the texture of the material in accordance with the main elements of the interior;
  • Opportunity to use your own design ideas;
  • Significant savings in money;

Types of fabric blinds

Depending on the direction of movement, blinds are divided into 2 types. Each type of design has its own characteristics, which are important to consider when designing:

  • Vertical. A design made of vertical strips of panels (lamellas) that can be positioned at different angles. Such models move vertically to the left and to the right. The mobility of the design and the visual lengthening of the space make these models indispensable in rooms with non-standard window openings and low ceilings.
  • Horizontal. The design consists of horizontally located lamellas and moves to the top line of the window opening. This allows you to completely open the window frames, which is very important when they are decorative elements of the interior. Horizontal blinds are also made from solid fabric; this design is called a fabric roller blind or, in other words, a Roman blind. There is another unusual variety of such blinds, called Japanese curtains.

Materials for blinds

For the slats of fabric blinds, choose dense fabrics that can hold their shape well and are not prone to deformation. The material must also be UV resistant.

Fabrics used for making blinds can be divided into 3 types:

  • Non-woven material. It is a type of synthetic fabric - polyester. This material is not resistant to moisture and does not have a long service life. The advantage is relative cheapness.
  • Woven material. Has proven itself to have high consumer properties. When choosing a material, you need to be guided by the thread density of the fabric. The higher the density, the longer the service life.
  • Jacquard. Very strong and durable fabric. It has high resistance to temperature changes and moisture. Holds color well and does not stretch or wear out. With a large number of positive characteristics, there is one drawback - the high cost of the material.

For rooms with a high degree of pollution and high humidity, it is recommended to treat the selected material with a protective impregnation that has water-repellent and dirt-repellent properties.

Fabric blinds: step-by-step master class

There are many simplified ways to make fabric blinds. But in order for the author’s design to be no different from professionally manufactured ones and not inferior to them in quality, it is necessary to adhere to certain standards. For this you will need materials:

  • Cornice;
  • Wall bracket and latch;
  • Lamellas, standard width 89 and 127 mm;
  • Hangers for slats. They are a horizontal bar with an eyelet in the center. The part can be purchased at the store or made from wire;
  • Runner;
  • Control chain for adjusting the angle of the slats;
  • Control cord;
  • Bottom chain. Fixes the lamellas from below, collecting them into a single piece;
  • Small weight. Inserted into the bottom pocket of the lamella to maintain the stability of the fabric strips. Specialized stores have ready-made parts. You can also make weights yourself from lead plates with wire rings around the edges.

Installation design

Depending on the proportions of the room and the style of the interior, the dimensions of future blinds are determined. The canvas can be designed to cover the entire wall or just above the window opening. You also need to select the length of the product:

  • Floor length. Recommended for spacious rooms. A gap of 10–30 mm is left from the bottom edge of the blinds to the floor line;
  • Length 2/3 of window height. This size opens up the window sill, creating an additional plane, which is optimal in confined spaces or in a room where houseplants are part of the decor;
  • Length to window sill line. Well suited for kitchens and bathrooms.

Cutting and sewing lamellas

After determining the parameters of the lamellas, the material is marked in the direction of the grain thread. When marking, take into account:

  • double lamella width;
  • hem width on both sides 3 mm;
  • the width of the hem of the upper part, which should be equal to the dimensions of the perpendicular strip of the hanger;
  • width of the pocket for the weight.

What is a wardrobe with roller shutters for a balcony and why is it needed?

A wardrobe with roller shutters differs from a regular wardrobe only in that instead of hinged doors it has blinds. Everything else is the same, the same shelves, drawers and hooks. With the appointment, everything is a little more complicated, because each owner has his own opinion on this matter.

The purpose of a cabinet with roller shutters largely depends on how well the balcony is insulated. In warm rooms, any structures are used, and on poorly insulated or uninsulated balconies you can only store things that are indifferent to changes in temperature and humidity.

Pros and cons of furniture with roller shutters

The ratio of appearance and content in such furniture is ideal, which is why there are more advantages than disadvantages:

  • Old balconies in Khrushchev and Brezhnevka buildings are so small that any door, when opened, takes up a significant part of the usable space. In new buildings there is a little more space on the loggia, but even here the hinged doors create inconvenience. Roller shutters completely eliminate this problem;
  • By lifting the blinds, you have full access to the contents of the closet, while the now popular sliding compartment doors cannot be opened wide;
  • The interior design of the room does not suffer at all. The color range of such facades is huge, plus, if desired, you can order lamination to look like wood, photo printing or some kind of exclusive sticker;


For artistic finishing of blinds, there is photo printing and panels on self-adhesive film.

  • Modern mechanisms are reliable and durable. Companies engaged in the manufacture and installation of such structures provide a guarantee for them from 5 to 7 years;
  • The price of roller shutters is relatively affordable, so blinds for the full height of a balcony will cost 7 - 8 thousand rubles, and if you decide to cover a sector 1 m high, for example, build a bedside table below, then it will cost you 3 - 4 thousand rubles ;
  • Making a cabinet on a balcony with your own hands is quite accessible to an amateur; the main thing is to stock up on the necessary tools and materials, but more on that later.

There is only one downside to roller shutters, and that one is controversial. Some owners don’t like the fact that the entire panel opens at once and opens with noise.

Examples of balcony cabinets with roller shutters

  • Some of our compatriots use the useful balcony space as a basement for conservation. In this case, a well-insulated room is not needed, but putting jars of cucumbers outside in our winters is stupid.


When making a conservation cabinet, special attention should be paid to the high load-bearing capacity of the shelves.

  • Avid home craftsmen set up a mini-workshop in the corner. This approach is very convenient, the table and shelves with tools are completely closed, as a result, the internal beauty of the loggia does not suffer and the spouse does not get nervous. By the way, you can organize a computer table using the same principle;


The roller shutter system can cover both a small closet and an entire workplace.

  • On insulated loggias combined or adjacent to the kitchen, roller shutters cover shelves with bulky dishes or household appliances, for example, a refrigerator fits perfectly there;


In apartments with a miniature kitchen, the refrigerator can be placed on an insulated loggia.

  • And finally, perhaps the most common option for using a balcony closet is to organize a warehouse there for things that you would hate to throw away. It's like a mini storage room.


Balcony cabinet as a container for rarely used items.

Why do you need roller shutters for a garage?

Initially, roller shutters were used to protect window openings, replacing the usual bars on windows. Accordingly, the main function of the mechanism is to protect against burglary. Subsequently, this method of protection gained popularity in the field of cargo transportation, in particular, warehouses, in the retail industry, as protection of window and door openings from burglary and theft.

Most importantly, people realized that this design could be expanded to the size of a garage door, provided that the materials from which the roller shutters would be made stronger.

Having “tested” the technology on small openings, I became confident that such a device is not only durable, but also practically not susceptible to precipitation.

Roller shutters have:

  • Long service life;
  • Not heavy;
  • Quite reliable;
  • Adequate in price;
  • You can make any design on them and choose almost any color;
  • And most importantly, they are very easy to care and use.

In addition to all the above advantages, roller shutters can be either mechanical (the most inexpensive option) or automatic, opening and closing with one press of a button on the remote control, which is most convenient when driving a car to a house or garage. without leaving it.

What are roller shutters

Roller shutters for balcony closets are a type of blinds, the universal and convenient design of which is becoming increasingly used. They are a canvas of connected lamellas. Furniture roller shutters move along guides and the canvas either slides behind the wall or is collected in a special box.

Design options for furniture roller shutters

For balcony cabinets, aluminum roller shutters are used that move up and down. The color can be matched to the design style of the balcony. The coloring composition is not afraid of weather tests. For small-sized furniture blinds, a special motor can be installed, and the structure will be controlled using a button.

The advantages of roller shutters include:

  • compact and space saving,
  • light weight,
  • protection of contents from dust,
  • modern design,
  • durability,
  • strength,
  • Easy care: just wipe with a damp cloth,
  • easy installation.

Design Features

The design of roller shutters for cabinets is quite simple: a certain number of slats are fastened together, the entire panel moves along guides. Two types of similar structures are used: with the ability to be assembled into a box and with the lamellas shifted to the side.

For windows, the first option is usually used, but roller shutters to protect cabinets are often installed with the ability to move to the side. Accordingly, a distinction is made between horizontal (up/down displacement) and vertical structures (lateral displacement).


Depending on the color scheme, as well as the style of the corridor or balcony, the shade of the roller shutters for installation in the closet is selected. In addition to the main function of such structures (effective organization of space), they perfectly protect things stored in a cabinet from dust and dirt, which is especially important on a balcony with cold glazing. If you choose metal or plastic slats, you don't have to worry about them being subject to changes.


Scheme of roller shutters in the closet

Therefore, wooden roller shutters are installed in closets more often in warm rooms (apartment or house corridor, bathroom, toilet). In addition, they do not require special care. Regularly wiping the surface with a damp cloth is sufficient. If significant contamination occurs on the lamellas, it is permissible to use a detergent.

Required Tools

If you decide to assemble and install roller shutters yourself, then there is nothing difficult about it. To work, you will need the usual tools that almost every home craftsman has:

  • hammer drill or powerful impact drill;
  • drills for concrete;
  • screwdriver with a set of bits;
  • pliers;
  • metal scissors;
  • wire cutters;
  • a set of keys;
  • Screwdriver Set;
  • building level;
  • plumb lines or laser level;
  • measuring instruments;
  • marker;
  • a multimeter, it is needed if the roller shutters have an automatic drive;
  • ladder;
  • mounting gun and sealant.


    To install roller shutters you will need simple and accessible tools.

The use of curtains in furniture

As a rule, furniture roller doors for closets are used in structures that are located in different rooms of a house or apartment. They can be found on furniture, in the kitchen as a kitchen cabinet door, in the hallway, on the balcony, in the bathroom, in the bedroom closet as a curtain. Clothes and shoes are usually stored in the hallway. The openings can be equipped with roller blinds, which not only save space, but also make the interior of the room more interesting. All sorts of niches are often used in corridors. To give them a full overview, a slat system will help.

How to make rotating wooden blinds

Topics related to making furniture yourself, as well as carpentry, are of increased interest among users of our portal. The topic of this article will be photo instructions for making rotary blinds from wood from a portal user with the nickname QWEsad.

I have long been planning to make wooden blinds, and in the first place I put not functionality, but the beauty of the blinds, which are part of the interior. Such designs are widespread in North America and can be purchased at any hardware store. I had never seen similar wooden blinds in Russia, so I decided to make them myself.

Let’s say right away that 3 years passed from the idea to the realization of the dream in the “tree”.

The lack of time and the user’s busyness with other things affected it. What ended up happening is shown in the following photo.

The result is more than impressive, so let’s take a closer look at the process of making wooden blinds with your own hands. In addition to drawings with detailed dimensions of the blinds, which the user calculated on the Internet, materials (well-dried boards) and tools for carpentry will be required. These are, first of all, special devices for drilling holes in workpieces.

And also cutters for lamellas.

The user also purchased all of the above-mentioned equipment on the Internet, although now, due to rising prices, he would have made the drilling jig himself.

Repeated blinds can be: blind or with a rotating bar to change the angle of inclination in the center of the slat or on the side, as well as with different slat widths:

It was the latter option that QWEsad settled on, deciding to use pine boards, widely used in “carpentry,” as a basis, and upon completion of the work, tint the blinds white. You can also use different types of wood to match the color of the finish. It all depends on the imagination of the master and the availability of certain materials.

The first thing you need is well-dried wood. To produce lamellas with a thickness of 9.5 mm and a width of 63 mm, trimmings of timber measuring 10x10 cm and 10x15 cm were used.

Installation instructions

There is a standard scheme of actions:

  1. A wooden frame is marked and constructed.
  2. Install a closet with roller shutters. This is done in the following sequence:
  • back wall;
  • side walls;
  • bottom and ceiling;
  • carrying out lighting (if provided);
  • internal contents, according to the project: partitions, shelves;
  1. Install blinds.

What you need for work

To decide on a set of materials, you need to have a detailed drawing. This will help you not to lose sight of such little things as fasteners: nails, dowels, corners, etc.

Furniture shutters can be equipped by the manufacturer, according to the type of design. However, you should check whether the kit includes fasteners.

Tools you will need:

  • drill with attachments for wood and concrete;
  • screwdriver;
  • tape measure and level;
  • jigsaw or hacksaw;
  • hammer.

Preparatory stage

Traditional cabinets try to be designed so that they cover the entire wall and extend to the ceiling. In this case, space is used most economically.

At the preliminary stage, using a building level, check the evenness of the surface. If necessary, the floor is leveled. Otherwise, the structure will not be built in compliance with all the rules.

Installation Tips

If furniture roller shutters are installed on a balcony closet, care must be taken in advance to ensure that the materials do not deform over time due to dampness and temperature changes.

To do this, the balcony is insulated, tiles or linoleum are laid on the floor.

The surface of the cabinet should be varnished; this prevents the wood from drying out or becoming waterlogged. Thanks to this, the shutters will not be repainted due to deformation of the wooden panels.

The load the concrete ceilings of the balcony can withstand is also taken into account. This affects both the weight of the cabinet and the number of things that are supposed to be stored in it.

Tools and materials

To make a cabinet with roller shutters for a balcony with your own hands, you will need the following materials:

  • Beam for the frame with a section of 40 x 40 mm. Four vertical racks are made from it along the entire height of the cabinet. If you plan to divide the cabinet into two compartments with a vertical partition, then there will be six vertical racks. Also, four beams will be needed to attach the frame to the floor and four more to attach to the ceiling.
  • And also: a fiberboard sheet for decorating the back wall,
  • two sheets of waterproof laminated chipboard for cabinet structural elements,
  • metal corners used to fasten shelves,
  • aluminum furniture roller shutters,
  • fasteners: dowels, nails, screws.

It is also possible to have a cabinet without using vertical guides , in which case you will need one more additional part, a stiffener. This bar will need to be installed between the vertical partitions in the section where bulky items are planned to be placed.

It is difficult to cut laminated chipboard sheets into structural elements yourself; it is possible to get chips and unevenness. This operation is ordered in a workshop on a machine.

Balcony cabinet diagram

Cut out the components of the cabinet according to the dimensions corresponding to its sketch:

  • two side walls
  • one vertical internal partition (if necessary),
  • two identical parts - floor and ceiling,
  • shelves, designed quantity.

To complete the work of assembling furniture, you should prepare the following tools:

  • hammer,
  • hacksaw,
  • screwdriver,
  • drill and bits for wood and concrete,
  • tape measure, pencil, ruler, level.

Installation of the product on the opening

  1. Assembly of a roller shutter frame, consisting of a horizontal box of various sizes and guides along which the curtain moves.
  2. Holes for fastenings are drilled on the surface of the frame. The step between the holes should be no more than 50 cm, which will ensure the reliability of the structure. Experts recommend purchasing a new drill so that the edges of the hole are neat and even and free of nicks or irregularities. The photo shows what the end result should be.
  3. Fastening tires to timber around the perimeter of the opening of a furniture product. The frame and guides are fixed with dowels of the appropriate size. It is important to know that aluminum roller shutters must be attached firmly, without the slightest possibility of play. This material does not deform during use and is not affected by the environment (excessive humidity or excessively dry indoor air). If the choice fell on plastic roller shutters, it is recommended to use free fastening. The expansion of the material due to exposure to different temperature conditions is taken into account.
  4. The blade must be carefully inserted into the guides and placed behind the drive shaft. One mistake at this stage can lead to a malfunction of the roller shutter or the impossibility of its free movement in the box. The shaft is slowly rotated by hand to avoid bends and distortions, carefully monitoring the blade. The process stops the moment it is completely assembled into the box.
  5. The next stage is the installation of traction elements and adjustment of each of them. Depending on the type of mechanism used by the manufacturer, a different sequence of actions is provided. If you assemble furniture roller shutters with your own hands, it is better to follow the instructions included with the product.
  6. Installing crossbar bolts at the bottom of the leaf allows you to fix the roller shutter at the bottom. To do this, holes are made in the side guide at the level of the fasteners.
  7. Checking the correct movement of the web. If, at the final stage, braking or an obstacle not visible to the master is detected that prevents the free movement of roller shutters in a certain area, you need to disassemble the structure and repeat all the manipulations again.

Sources

  • https://str-mebel.ru/ruchnaya-rabota/mebelnye-zhalyuzi-svoimi-rukami.html
  • https://UnasBalkon.ru/interer/rolstavni-dlya-shkafa-svoimi-rukami.html
  • https://luchshiebani.ru/zhalyuzi/mebelnye-zhalyuzi-svoimi-rukami.html
  • https://mastack.ru/decor/interior/rolstavni-dlya-shkafa.html
  • https://soda102.ru/kak-ustanovit-mebelnye-zhalyuzi-svoimi-rukami/
  • https://poliany.ru/zhalyuzi/mebelnye-zhalyuzi-svoimi-rukami.html
  • https://aqua45.ru/otdelka-i-furnitura/rolletnyj-shkaf-svoimi-rukami-2.html
  • https://lk-mebel.ru/samodelkin/rolstavni-dlya-shkafa-svoimi-rukami.html
  • https://englishpromo.ru/2019/12/mebelnye-rollety-svoimi-rukami/
  • https://steklo360.ru/mebelnye-zhalyuzi-svoimi-rukami.html
  • https://st-anna.ru/pro-okno/rolletnaya-dver-svoimi-rukami.html
  • https://AmiPlus.ru/spalnya/rollety-dlya-shkafa-svoimi-rukami.html
  • https://karniz-dv.ru/pro-okna/rolstavni-na-svoimi-rukami.html
  • https://VegaMebell.ru/dizajn/mebelnye-zhalyuzi-svoimi-rukami.html
  • https://allshtori.ru/mebelnye-zhalyuzi-svoimi-rukami.html

Installation of electrically controlled roller shutters

When choosing furniture roller shutters for a closet that are controlled by an electric drive, you must first install it and lay the cable inside the box. It will subsequently be connected to the power supply. The photo clearly demonstrates how to lay the cable correctly so that it does not get caught between moving elements and is not damaged.

These roller shutters for closets are durable, regardless of the number of times they are opened. The drive can be included with the product or separately.

Useful tips

  • It is better to install roller shutters yourself with an assistant. This will ensure that the work is completed quickly and that the box is evenly fastened (for example, one adjusts the position, the other makes holes using a drill).
  • It is better to fill the technological holes on which the plugs are installed with silicone sealant. This will protect the internal mechanism from dust and moisture, increasing its service life.

Furniture fabrics have gained popularity due to their functionality and attractive appearance. Do-it-yourself installation of roller shutters for a closet should be carried out according to the technology of this type of work, taking into account the features of the roller shutter design.

Rating
( 1 rating, average 4 out of 5 )
Did you like the article? Share with friends:
For any suggestions regarding the site: [email protected]
Для любых предложений по сайту: [email protected]