How to make a niche for curtains in a suspended ceiling: 5 ways to install a hidden cornice under a curtain

The ideal interior design of a room depends on the combination of elements that are each in its place, and at the same time each fits exactly into the style of the room space. Unfortunately, it is not always possible to choose something suitable, so some accessories and functional items have to be hidden from view. This fully applies to the cornices on which curtains are hung. There are few options to hide them, one of them is most often used during the renovation process. This is a niche for plasterboard curtains.

Essentially, a niche is a space separated from the room by a box (partition) that covers part of the ceiling near the window. A plastic tire, string or any other inexpensive cornice is installed into it and attached to the base ceiling surface. This version of the cornice is simple and cheap, but there are many complaints about its appearance. Therefore, it is optimal to make a box for it, and it is better from plasterboard, as the easiest material to work with.

How to make a niche for curtains in a suspended ceiling: 5 ways to install a hidden cornice under a curtain

In addition to the traditional fastening of curtain rods to a wall or ceiling, another original option is available with a suspended ceiling - a hidden curtain. This arrangement opens up new design possibilities and makes the room appear higher since the bar is not visible. To do this, you will need to make a suspended ceiling with a niche in which the cornice will be hidden. This way, the curtain mount will be invisible, since the crossbar is recessed into the interceiling space. In this article we will look at how to choose the right cornice and calculate the dimensions of the structure. We will also examine in detail five ways to create a hidden niche in a suspended ceiling.

Advice from the experts

The niche for curtains in the ceiling will last a long time.
But after the decorative ceiling covering is installed, it will no longer be possible to change its parameters. To avoid various problems, professionals recommend taking your time and doing the following:

Carefully consider the design of the box. It is better to make a drawing indicating all the required dimensions. Choose a cornice design

It is important that after attaching the curtains to it, the curtains hang freely and do not touch the window sill or heating radiators. You can place the structure along the entire wall with windows - this will help visually expand the room

When purchasing, you should give preference to curtain rods with ceiling mounting. Ensure functionality of elements. Lifting mechanisms, hinges, runners and other elements must move freely and silently.

Recommendations for choosing a cornice

Before purchasing, it is advisable to decide on the approximate design of the curtains. For light curtains, a plastic crossbar is sufficient, but for heavy curtains you will need a durable aluminum or metal curtain rod.

Let’s immediately say that both ceiling and wall models can be installed in a niche, but it is better to give preference to the first option. Such cornices are much more compact and easier to hide behind the tension fabric. Otherwise, you will need to lower the ceiling lower, which will reduce the height of the room.

Curtains are hung in several rows: just tulle, with curtains, or additionally decorated with lambrequins. Depending on the number of curtains, you need to purchase one, two, three or four-row curtain rods. It’s also better to think through this point in advance.

Advice! If you hang a ceiling rail across the entire width of the room, the curtains can be pulled apart on both sides of the window. This will allow more light to enter the room.

Niche for plasterboard cornice

So, there are two rectangular structures installed on the ceiling, from which you can already determine the niche for the cornice in the living room. In order for both structures to merge into one box, it is necessary to connect them at the lower edges with crossbars made of PP profiles. The crossbars are installed at a distance of 40 cm from each other.

You need to start assembling the frame on the floor. To do this, prepare two letters “P” from the guide profile. The letter will be unusual: the top shelf is the width of the room (let it be 3.2 m for example), the racks are 8 cm each. The standard profile length is 3 m, so from wall to wall one will not be enough, so you will have to increase it. 10 charming stars children who look completely different today Time flies, and one day little celebrities become adults who are no longer recognizable.

Pretty boys and girls turn into... Our ancestors slept differently than we do. What are we doing wrong? It’s hard to believe, but scientists and many historians are inclined to believe that modern man sleeps completely differently than his ancient ancestors.

Initially. It is necessary to sheathe the box with plasterboard only from the bottom and front sides. Therefore, several strips are cut from the sheet. Some will be as wide as the width of the box for the plasterboard niche for the cornice, while others will be as wide as the height of this box.

Fastening is done with self-tapping screws using a screwdriver.

Dimensions and depth of niches for curtains

First of all, the dimensions depend on the chosen cornice and its location in the room. For a lightweight design designed for tulle and thin curtains, a width of a few centimeters is sufficient. For a wider one, on which two or three types of fabric of different weights are hung, you will need at least 10 cm.

Other factors also influence the parameters of a niche for a curtain in a suspended ceiling:

  1. When determining the width, take into account the dimensions of the window sill and the position of the battery. In order for the curtains to hang evenly, they should not touch the radiator. But too much indentation reduces the usable area of ​​the room. As a rule, the optimal width is 20-25 cm.
  2. The length most often coincides with the length of the wall. But it may decrease depending on the layout of the room, for example, when the window is located in the corner of the room. The minimum size is slightly wider than the window, at least 10-15 cm on each side, while the curtains should cover the edges of the window sill.
  3. The depth of the eaves niche depends on the installation method and frame parameters. The minimum distance from the rough ceiling to the suspended ceiling is 5-7 cm. Additionally, it is necessary to take into account the dimensions of the cornice, hooks and curtain tape; they must be completely hidden behind the canvas. In addition, about 8 cm should be added to compensate for the viewing angle, since we are looking at the niche from bottom to top. Thus, the optimal depth is 15-20 cm. It is also important to provide additional space if you plan to install a hidden lighting system.

Note! In a niche that is too deep (for example, in two-level structures, the indentation can reach 40-50 cm) it is inconvenient to attach the crossbar and hang curtains.

Rules for constructing a plasterboard box for curtains

Like all construction processes, the assembly of a plasterboard niche for a cornice is carried out in several stages:

  • Preparation,
  • ceiling markings,
  • assembly of frame structure,
  • plasterboard covering,
  • finishing.

Preparatory stage

Before you make a niche for curtains from plasterboard, you need to prepare all the required materials and tools. The materials you will need are gypsum board sheets with a thickness of 9-12 mm, perforated paper tape or serpyanka tape, putty, self-tapping screws, two types of profiles: guide (PN) and ceiling (PP).

As for the tools, to carry out the work you will need: a hammer drill, a sharp knife, a construction level, 2 spatulas (wide and narrow), a tape measure and a pencil, a screwdriver.

Marking

If you are constructing a plasterboard niche for curtains near one wall (second option), then from the surface you need to set aside a distance along the ceiling in the corners of the room equal to the width of the protrusion, plus 10-15 cm. After which both points are connected to each other by a line that will be parallel to the wall . It needs to be drawn on the ceiling with a pencil, using either a prepared metal profile or a strong thread as a ruler. Then, from the drawn line, you need to set aside the width of the box and also draw a line.

We attach the starting profile

The main task of marking a niche for plasterboard curtains is to accurately mark the dimensions of the structure.

Frame assembly

  1. PN profiles are laid along the lines marked on the ceiling.
  2. Through them, holes are drilled in the ceiling surface using a hammer drill every 50-60 cm, starting from any wall.
  3. Dowels are inserted into the holes.
  4. The profile is re-attached to the ceiling and secured to it with self-tapping screws using a screwdriver.
  5. Then, from the same profile, you need to make four L-shaped structures with a side length of 7-10 cm. The size of one of the sides depends on the height of the box; it is this side that the device will be attached to the wall.
  6. The manufactured L-shaped parts are installed along the edges of the profiles attached to the ceiling, so that one side fits into the profile and becomes its continuation, and the second rests against the wall, positioned perpendicular to the ceiling element. That is, ultimately two U-shaped structures should be formed. The installed elements are attached to both the ceiling and the walls.
  7. There is another option that uses two L-shaped parts. To do this, one end of the profile itself must be bent at 90°, creating a vertical strip that will have to be attached to the wall. When making an L-shaped element, it is necessary to take into account the distance of the second end of the profile to the opposite wall, taking into account the entry of the first into the second at a distance of 5-10 cm. Plus, of course, a vertical bar.

The ceiling should look like the one in the photo below. There should simply be two such elements with a distance between them equal to the width of the box.

Now you need to cut several pieces from the ceiling profile, with a length equal to the length of the vertical strip. The quantity is determined by the length of the horizontal part and the installation pitch. For example, if the profile length is 3 m (300 cm), and the installation step is 60 cm, then 300/60 = 5 pieces. But this is the norm and more is allowed

Their ends are inserted vertically into the horizontal part of the assembled structure, to which they are attached on both sides with self-tapping screws. Next, the lower free ends of the segments are connected to each other by a profile (PN). There are two metal structures on the ceiling, which must be connected to each other for rigidity. For this purpose, sections of the PP profile are used, the length of which is equal to the distance between the two elements of the box assembled on the ceiling.

Design drawings for a plasterboard niche

Let's consider other options for making plasterboard niches using LED lighting.

Niche with milled plasterboard

Narrow frame

There is another design for a plasterboard box for curtains, which is much simpler in terms of assembly. It is assembled from an in-line PP profile, the width of which is 60 mm. Taking into account that the box will be covered with 9 mm thick plasterboard, the width of the entire structure will be 78 mm. This is a fairly wide structure, although in the category of plasterboard boxes for curtains this is the narrowest option.

In practice, the niche is assembled in exactly the same way as in the previous version. Only instead of PN profiles it uses PP. In this case, the vertical segments connecting two horizontal elements are installed across, and not along, as in the first case. Additionally, it should be added that the niche for plasterboard curtains of this type is a frame made of one structure. The photo below shows a narrow plasterboard curtain box.

You can also assemble a frame for a hidden cornice made of plasterboard for curtains from a PN profile, the width of which is 27 mm, which greatly reduces the width of the box itself. But this design is very thin, it cannot always fit into the interior of the room. It’s better then to use a 50/40 profile. Below is a video of such a montage.

Sheathing

The frame for a hidden curtain rod made of plasterboard is ready. All that remains is to cover it with the gypsum board sheets themselves. To do this, sections are cut out of the sheet with dimensions equal to the dimensions of the frame assembled on the ceiling, which are attached to the finished structure.

There are certain requirements for fastening plasterboard sheets:

  • the distance between the screws is 10-15 cm;
  • the distance from the edge of the segment to the place where the fastener is screwed in is 1-2 cm;
  • The depth of screwing in the screw head is 0.5 cm.

Finishing

Typically, any plasterboard structure is puttied, leveling the planes. A plasterboard niche for curtains is no exception. Therefore, it is first coated with a primer, and after drying it is leveled with a putty mixture.

An important point is the sealing of the joints of the gypsum board sheets with each other, for which serpyanka tape is used. First, a layer of putty is applied to the joint, then tape is immediately applied, which is covered with another layer of putty on top. The joints of plasterboard sections located in different planes are closed with special perforated corners made of galvanized metal, plastic, or aluminum. The installation process is exactly the same as with tape.

After the putty has dried, the planes of the box are sanded with fine-grained sandpaper, thereby removing spatula marks and minor defects. The primer is applied again. As for the design, usually the box and the plasterboard niche for the cornice itself are painted in the same direction to avoid glare on the ceiling.

The main purpose of cornices

Curtains have several functions in interior design:


  • Installation of PVC windows

  • Covering the drain hole with your own hands
  • How to lay flexible tiles on the roof?
  • Firstly, this is the design. Using a hidden installation, you can achieve elegance, because the curtains will not be visible. It will appear that they are falling from the ceiling without any visible fastenings. Plus, if you add appropriate lighting, you can create a stunning effect. So this will allow you to realize the most daring design solutions.
  • Secondly, this is functionality. When hanging curtains on a D-Premium fabric stretch ceiling or Pongs PVC stretch ceiling, you can use a regular ceiling cornice by installing a molding behind the stretch ceiling. Another option is a hidden design.

Advantages of a hidden cornice

A hidden cornice is an ideal option for rooms with low ceilings, because there is no need to allocate a special place for attaching curtains, which will visually reduce the space. In the place where the cornice is installed, you can hide various communications without resorting to a hidden method of additional installation, and you can also install lighting there. Thus, you will save not only time on work, but also significant money.

A hidden cornice will perfectly cover a window sill of any size. This can sometimes be difficult to achieve when using a conventional mount. It does not require time to choose the color and design of the structure, since it will still not be visible, and all the main attention will go only to the curtains. The room will have an atmosphere of limitless space, that is, there will be no defined boundaries of separation.

The cost of a hidden cornice for fabric and PVC stretch ceilings

Installing a hidden cornice does not require large investments, you only pay for practicality. The hidden cornice is installed directly in the niche that is created when installing the stretch ceiling. For certain cornices, the size of the niche is different.

However, there are certain standards: its depth should not be less than 4 cm for light curtains and not less than 20 cm for heavy ones. You purchase a plastic ceiling cornice, installers make a niche in the stretch ceiling and everything is ready. This idea will cost you approximately 400-800 rubles/m2, depending on the complexity of the niche design.

Brief description of the design, advantages

The cornice is usually closed with a special niche. Its arrangement and design features must be planned in advance - even at the stage of finishing the ceiling. In a niche you can hide all the unwanted functional parts of the curtain, install lighting, and create the effect of a floating curtain.

The niche space does not require special finishing; it will still be hidden by curtains

For hidden fastening of curtains, a cornice of any convenient design is suitable

Note! If you do not provide a niche in advance, in the future you will have to dismantle part of the finishing, change the tension structure, or come up with a decorative element to hide the suspension. The dimensions of the niche depend on the structure that needs to be placed in it

The dimensions of the niche depend on the structure that needs to be placed in it

A few ideas on how to hide a cornice behind a suspended ceiling

If you decide to install a cornice behind a suspended ceiling, you should know the various options for its installation.

  • Hidden installation. The process of installing a structure invisible to the eye is quite complex. In this case, the cornice is installed in a niche hidden behind the tension shelf. It appears as if the curtains are falling directly from the ceiling.
  • Backlight. When installing a cornice, you can consider using lighting. In this case, the work will be carried out slightly differently. The result will be very beautiful and original. LED lamps are located in a specially created plasterboard box.

  • Beam. One of the most common options is installation using beams. Here the cornice is attached to a wooden beam, which is mounted on dowels.

  • Universal baguette. Alternatively, you can use a baguette.
  • The cornice hidden behind the suspended ceiling is shown in the photo above. These pictures show the installation system well. Take a closer look at them to have a clearer understanding of the different installation methods.

Interior design options

Hidden curtain rods are an excellent solution and almost the only one for rooms with angled ceilings (monsard). The traditional method of fastening the cornice in such cases does not look very nice. Hiding it from view is the only correct solution.

Which is better: heated floors or radiators?

Warm floorBatteries

If the budget allocated for repairs allows, then you can make original lighting as in the photo. Lighting can be installed both inside and outside the curtains. This solution puts emphasis on the window area and allows you to use this space separately. For example, use for a desk or relaxing with a book.

A hidden curtain can also be used to create a canopy over a sleeping area. The room takes on a more aesthetic appearance, because the fastening design does not stand out from the overall interior. A cozy and romantic atmosphere is created if dim lighting is used in this niche.

Ceiling niche

Regardless of which installation option you choose, in any case you need to create a ceiling niche. Note. When installing a cornice for a suspended ceiling yourself, it is necessary to create a niche during installation of the entire structure.

Work order:

  • First you need to mark;
  • then install the profiles that form a reliable frame;
  • install a mortgage for the cornice;
  • stretch the fabric;
  • install the cornice.

Preparation

You need to start by purchasing materials. For this you will need:

  • plasterboard sheets;
  • two types of profiles: ceiling PP 27x60 and guide PN 28x27;
  • self-tapping screws;
  • tape for sealing joints;
  • putty.
  • perforator;
  • screwdriver;
  • knife;
  • putty knife;
  • tape measure and pencil;
  • strong thread.

Applying markings is a very important moment. It is based on the correct location of the cornice (and, accordingly, the niche) relative to the window sill or heating radiator. The first relative to the others should be located inside the living room by 15-16 cm. Therefore, knowing the dimensions of the protruding part of the window sill or radiator and adding 15 cm to it, we obtain the distance of the place where the cornice is attached from the wall in the living room.

About the backlight

As noted above, you can embellish the interior by creating colorful lighting using LED lamps. To do this, use a special profile for PVC suspended ceilings. For D-Premium fabric stretch ceilings, such profiles do not exist; you cannot do without the help of a specialist.

Successful repairs, your navigator in suspended ceilings, NICOMAX COMPANY!

Preparatory work


Before installing the base for the niche, you should cover up all the holes and cracks.
You should not immediately start installing the frame; you must first carry out preparatory work. Clean corners, walls, and ceilings from swollen old plaster, whitewash, and wallpaper residues. If, after getting rid of everything, holes appeared, the surface became uneven. Then you need to clean everything from dust and prime it.

Using putties and putties, remove unnecessary grooves and achieve a smooth surface. Draw all control points of fastenings, lines along which the profiles will be mounted.

It is required to apply points and lines evenly, without bevel. Because the profile will also lie crookedly, the design will not be ideal. Suspensions are pre-made from PP. Their size is equal to the height of the box minus 1 cm.

Niche for curtains in a suspended ceiling: design options and fastening methods

When creating an original interior in your apartment or house, you can’t help but pay attention to suspended ceilings. It is through this type of ceiling design that the necessary style and image of the living space is created. Modern technologies have stepped forward, opening up almost unlimited possibilities for the designer’s imagination. If previously it was quite difficult to select cornices for a stretch ceiling, today the situation has changed radically.

Technologies and consumables have appeared that make it possible to equip a room with tension systems with beautiful and stylish curtains. For these purposes, curtains for curtains under suspended ceilings are used, which have different designs and differ in installation methods. Hidden cornices look the most attractive, the installation and design of which arouse genuine interest. Let's look into it in detail. What is needed to properly and correctly install hidden cornices for a tension system.

How to hang curtains correctly

Having determined which curtains are best for curtain rods for suspended ceilings in a given room, you need to choose the right method for forming a niche. For heavy curtains and multi-layer installations, lambrequins, it is better to use a steel frame.

Note! When fastening curtains, you should avoid exposing the ceiling to avoid damaging it.

If the width and depth of the niche are calculated optimally, there will be no problems with attaching curtains and tulle to the cornices. Curtains can be hung on rollers, loops or hooks; plugs are installed on the sides to prevent them from slipping.


To secure complex installations, it is better to seek help from curtain specialists.

Keep in mind! The best curtains for a niche are made of plain thick fabric or satin. Not the best solution is lambrequins and additional decoration that is not intended for a hidden niche - it will look like scraps of fabric carelessly sticking out from the ceiling.

Creating a floating curtain effect

A constructive solution for installing a cornice in a niche allows you to achieve the effect of a floating curtain in a room. A greater “airiness” effect is given by the use of a special metal profile - with a curtain or like a mortgage.

If the canvas for the stretch ceiling is chosen to be of a glossy type, the effect will be greatly enhanced, the curtains will float in the air. In addition, glossy ceilings visually increase the height of the room.

Installing a stretch ceiling with the formation of a niche for curtains and tulle will undoubtedly complicate the work and will take more time. But such installations look more interesting than wall cornices under the ceiling and allow you to solve various design problems in the room, which makes the choice in their favor reasonable and correct. A room with floating curtains looks neat, stylish and beautiful.

Niche as an important element of the tension system design

It should be said that curtains, like ceilings, are an important element of the interior. Fabric and material play a key role in creating a certain style, but do not forget how the curtains, tulle or blinds will be attached. With ordinary rooms where there are simple, flat ceiling surfaces, this issue can be resolved quickly and easily. The situation is more complicated in cases where there is a stylish and beautiful stretched fabric in the upper part of the room, and the curtains should emphasize the beauty of the design.

In this case, a suspended ceiling with a niche for curtains solves the problem. This design fully meets the conditions of modern ceiling design and the requirements for the operation of fabric ceilings.

What is a niche? This is a hidden space artificially created in a suspended ceiling or in suspended plasterboard, combined structures. The main function of this element is to disguise the hanging kit for attaching the curtain. This design is most often created near a window opening, but the technical possibility of installing a niche on the ceiling surface in the middle of the room is not excluded. This technical technique involves dividing the internal space into zones. This looks especially good in bedrooms and on open terraces.

The dimensions of the structure are determined by the dimensions of the cornice and the types of curtains. For curtains and curtains made of thick fabric, a recess with a depth of 15 cm will be required, while a structure with a depth of 4-5 cm will be sufficient for tulle and lambrequins. It is permissible to create a recess in stretch ceilings with a depth of 25-30 cm when it comes to multi-layer heavy drapery.

Note: curtains or drapes can be ordinary, attached to the curtain rods using rings or plastic hooks. Curtains with scallops are sometimes used. In such cases, a special fastening is used - eyelets.


Functionally, the niche performs two tasks.
The first and most basic is decorative. Thanks to this technical solution, it becomes possible to style the room in one key. Those. curtains and curtains descend directly from the ceiling, visually increasing the interior space. The second problem that the presence of a recess in the ceilings solves is the convenient use of hanging materials. Curtains, tulle curtains can be changed over a certain period of time, while the suspended ceiling remains untouched, safe and sound. In addition, the presence of a recess on the ceiling surface allows you to improve the aesthetic perception of the upper part of the room by installing decorative lighting in the niche.

Installation of drywall and preparation for finishing

When cutting gypsum board fragments, it should be taken into account that one edge of the box, usually the bottom, should be slightly wider in order to cover the ends of the two side edges.

The sheathing process looks like this:

The prepared pieces of drywall are fixed to the frame with self-tapping screws in increments of 25–30 cm. A special bit installed on a screwdriver will greatly facilitate the process: due to its shape, it will not allow the screw to be driven too far and crush the plasterboard.

  • As mentioned earlier, it is more convenient to mount the wall of the box facing the window at the bottom. The small dimensions of the niche will not allow you to “crawl” with a screwdriver to the fastening points.
  • After the installation of the gypsum board is completed, the seams are glued with reinforcing tape or serpyanka mesh and sealed with a special putty for drywall. It also processes the recesses formed by the heads of the self-tapping screws.
  • After drying, the seams are rubbed with sandpaper, and then the entire surface of the box is primed. The primer is applied in two layers. After it has completely dried, you can proceed to finishing.

Methods for equipping a niche for a tension system

A niche for curtains in a suspended ceiling is not a complex element in its design. However, to create it you will need a lot of experience and skills. If you wish, you can decide to work independently, provided that all the subtleties and nuances are observed. You need to know where to attach the structural elements and what fittings to use for installation.

Important! The marking and installation of niche structural elements is carried out at a preliminary stage, when the canvas for the ceiling part is in a folded state. Alterations already in the process of stretching the fabric or film can lead to the main surface going in waves and folds appearing on it.

What the main work looks like in this case:

For reference: the bottom of the niche is usually plastered or covered with sheets of plasterboard. Accordingly, the upper corners in the niche must have the correct shape so that there is somewhere to install a glazing bead or wedge profile to fix the edge of the canvas.

The main parts and structural elements are indicated in the figure, which allows you to get a fairly complete idea of ​​what you have to deal with. The presented set of equipment and devices is standard for the equipment of recesses in tensioned fabrics.

To work you will need:

  • aluminum corner 40x40mm;
  • bumper;
  • ceiling and PVC plinth;
  • harpoon.

This design is designed for the most rich equipment of the ceiling surface, including the installation of spotlights and hidden lighting.

Another option for installing the recess looks more affordable and simpler to implement. This requires a minimum of parts and connections. Instead of expensive metal components, you can use wooden blocks and plastic harpoon baguettes.

The simplest option is based on the use of a wooden block. The dimensions of the timber can be 40x40 or 50x50mm. Ceiling and wall moldings are used to fasten the canvas.

Step-by-step instructions for installing a niche made of gypsum plasterboard

  • Once the required dimensions have been determined, you need to make markings on the ceiling (two stripes on the ceiling and one on the wall) using a pencil and a long ruler or coated thread.
  • Using screws with plastic elements, you need to secure the guide profile according to the markings.
  • Insert the wide metal frame sideways into the guide. Fix it with pendants that are attached to the ceiling.
  • Next, another profile is attached along another line.
  • You can begin covering the frame with plasterboard sheets. First you need to make the necessary measurements and cuts in the sheet, where this is required by the design on the ceiling.
  • The gypsum board is screwed to the metal frame using screws in increments of 15-25 cm.

Arrangement of vertical elements: there can be a maximum of 3, a minimum of 1. It is necessary to assemble the base - connect the ceiling profile with sides to the guides. It is better to assemble the vertical base on the floor - it is difficult to use a screwdriver at the top, due to the small distance between the wall and the edge of the niche.

According to the markings, the already assembled vertical structure is installed and secured. We also fix the sides of the structure, but the guides are not needed.

After the niche is installed, all that remains is to complete the finishing. Fill the joints and fasteners with self-tapping screws. Now the frame is being installed under a single-level or two-level ceiling. In both cases, the floating curtain will look organic.

Complex design options

For more complex ceiling design options, various options are used for installing the cornice in a niche, which can have a curved shape. For example, a niche for cornices with a bend.

In this case, instead of wooden blocks, a U-shaped metal profile or a stacked structure with metal corners and a bumper is used. With this design, you can do without attaching a baguette. The recess for the harpoon is created in advance.


Using hidden metal profiles, you can create niches with a bend for complex multi-row hidden cornices. Curved areas are of some interest in terms of design excellence. Another complex option is a niche in a suspended ceiling, which is mainly designed for installing hidden lighting. Here, another element is added to the niche design - a baguette with a recess, especially for laying the LED strip.

Everything else is done using the same technology that was described above, in a traditional, standard or budget version.

Do-it-yourself installation of a plasterboard cornice

To create a cornice, you will need precise actions, accuracy in working with drywall, and a sequence of actions.

  1. In the case of installing a cornice on a plasterboard ceiling, fastenings are carried out in places where the profiles pass. This can be easily checked with a magnet.
  2. The cornice is attached to the ceiling with plastic butterfly dowels. You should make a hole for them in advance. Scheme of fastening the cornice with dowels
  3. Heavy curtains are hung on a curtain rod attached to an anchor.
  1. Profiles, preferably galvanized. They serve well and for a long time, making the structure more rigid.
  2. Self-tapping screws, screws and dowels.
  3. Putty “Finish”.
  4. Reinforced tape.
  5. Drywall up to 12mm. thick.
  6. Primer.
  1. You will need a knife for cutting drywall. You can have a regular one, but with a sharp edge.
  2. A set of screwdrivers or a screwdriver.
  3. Planer for chamfering.
  4. Set of spatulas.
  5. Regular roller.
  6. Scissors for cutting metal.
  7. Meter, pencil and ruler.
  8. The level is normal, but it is more difficult to work with than a laser machine.

To create coziness in a room or hall, curtains or drapes, curtains, and tulle are required to protect from sunlight. This not only decorates the window, but also creates a unique interior and modern design. For curtains, the market offers a huge number of curtain rods, strips and strings. However, modern fashion dictates its own rules, and for this the cornice or string needs to be hidden.

It’s even better to create a plasterboard cornice with your own hands. An example of how to design a cornice for curtains made of plasterboard with your own hands

Recommendations for equipment and installation of niches in suspended ceilings

The first thing you need to pay attention to when planning the installation of hidden curtain rods is what type of curtain will be used in the future. Both light materials (tulle, gauze, chiffon and satin) and heavy fabrics (gabardine, lurex, velor and velvet) are equally suitable for stretch ceilings.

Accordingly, for each type of curtains, a different type of frame is selected - a plastic or metal profile, a pipe or multi-row pencil cases. To implement the practical part, try to take into account the following aspects:

  • Curtains for suspended ceilings look best in large and deep niches that can be equipped in tension systems. Typically, this design option is used in large and spacious rooms, where there are no critical comments on the height of the room and the area of ​​the ceiling.
  • The width of the niche varies in the range of 10-25 cm, depending on what type of fabric is used for the curtain and how many rows there will be.
  • Do not forget to take into account the width of the window sill when determining the width of the niche. Together with heating radiators, the window sill usually protrudes 10 mm from the wall. Curtains should not lie close to radiators.
  • It is better to make a niche across the entire width of the room, this will make it easier to install a suspended ceiling and this design will be convenient for installing and dismantling cornices.

Where to choose?

Which cornice to choose depends on the taste and style in which the room is designed. When choosing, cost also plays an important role.

The cost of cornices is influenced by the type of lighting fixtures, the canvas itself, the mounting option, and the number of communication parts on the base ceiling covering.

On sale, cornices come complete with fastenings: screws, dowels, hooks. Depending on the shape and method of installation, the price of curtains for suspended ceilings will average from 350 rubles per square meter in Moscow and the region. A separate cost goes for rounding the cornices - from 260 rubles.

Some ceiling installation companies hold promotions. When ordering a ceiling, you will receive a cornice as a gift.

Which curtains are better for a suspended ceiling is up to you to decide. If you dream of curtains flowing from a height, hidden curtains are your option. If the choice of curtains is not critical, then you can get by with the traditional, external mounting option.

The budget option for curtain rods is plastic. They have a large selection of colors. But, it is better to choose a color that matches the ceiling fabric. The only negative is that heavy curtains cannot withstand them.

Aluminum cornices are similar to plastic structures. They are also light, but quite durable, inexpensive compared to wood. Often the kit includes decorative overlays. Curtain rods are more expensive than plastic ones, but their installation is simple - they do not bend like plastic ones.

The wooden version is expensive. Such curtains look good in apartments with high ceilings. There are options with carvings, ornaments, and drawings. Wooden cornices must fit into the interior, complementing it.

Steel construction is the only option if your curtains are too heavy. Such cornices are often decorated with overlays.

The structure is assembled and the ceiling covering can be installed.

conclusions

Stretch ceilings can now be made even in the most daring version. The presence of all kinds of devices and accessories allows you to create the most intricate types of ceiling designs, one of which is curtains flowing from above. The niche needed to install hidden cornices is quite simple to make. The main thing is to comply with the necessary conditions and technology requirements. Finally, remember the following main aspects that you may need in your work:

  1. A niche in suspended ceilings is made only when installing hidden cornices
  2. Acceptable parameters for the excavation depth are minimum 4 cm, maximum 25-30 cm.
  3. The maximum permissible parameters for the width of the recess in suspended ceilings are 10-25 cm.
  4. The niche can have a simple shape and design or be made to suit the complex configuration of the ceiling part
  5. Marking and installation of fastening devices is carried out before the start of the main work on stretching the fabric

Marking

At the initial stage, markings are made:

  • The distance from the box to the most prominent element of the window opening should be at least 16 cm. It is laid on both walls and connected by a line on the ceiling. This line will be the boundary of the niche. It is convenient to use painting thread for drawing.
  • Parallel to the line, draw another one, which is the inner boundary of the box. The width between them corresponds to the width of the structure.
  • Verticals are lowered on the walls, limiting the height of the frame.

USEFUL INFORMATION: Using moisture-resistant drywall in the bathroom

The following diagram shows a variant of a niche, which is provided in the design of a suspended ceiling.

Ceiling hidden curtain rods

  1. Features and Benefits
  2. Design Features
  3. Materials
  4. Installation features
  5. Practical recommendations
  6. Beautiful examples in the interior

The main task of ceiling cornices is to be able to securely fix curtains. And only then the question of aesthetics arises. But the standard option does not always fit into the interior style. Especially when it comes to modern design solutions. Therefore, the desire to remove the cornice but leave its functionality is understandable.

Hidden structures look very beautiful indoors. Visually raising the ceilings, they create a harmonious and impressive interior, drawing all attention to massive and weightless fabrics and decorative elements. The curtains seem to flow directly from the ceiling. By expanding the space, ceiling cornices increase the area of ​​the room, which is a definite plus for miniature apartments.

What are hidden ceiling cornices, what are the key features and how to choose and install correctly - we will tell you in the article.

Features and Benefits

Often, the desire to hide the cornice arises among owners of suspended ceilings, when they do not want their eyes to cling to the metal pipe above the window instead of a smooth coating and shiny fabric. At the same time, in a well-thought-out interior, at first glance it remains unclear how the curtains falling from the ceiling are attached.

The main advantage of built-in curtain rods is the ability to be used in non-standard rooms with an unusual window shape. At the same time, the design itself can be adjusted to any features and repeat a U-shaped, curved and semicircular line.

Why choose a hidden cornice? For low ceilings, the use of a regular rough cornice is unacceptable. One element can visually steal most of the room. For such apartments, a hidden curtain rod is perhaps the only preferable option that can make the room more spacious and wider:

  • Thick curtains across the entire width of the wall look very laconic, beautiful and modern.
  • Hidden designs are great for rooms with suspended ceilings. The proximity of a hidden cornice and a vulnerable ceiling covering is absolutely safe and will not cause damage to the film.
  • Vertical folds of curtains flowing down without any support look incredibly beautiful and expand the space of the room.
  • For owners of wide window sills, built-in cornices are an excellent way out. With such a feature of the window, choosing a suitable option is quite difficult. And with a hidden design, you can hang any curtains, regardless of the window sill.
  • Installing a built-in cornice yourself is no more difficult than a regular one.

An invisible cornice fits perfectly into any interior and is a practical and universal solution:

  • In an additional ceiling niche in front of the wall, you can hide wires, install an Internet line, provide ventilation, or decorate the structure with additional lighting.
  • Color, texture, elegance of fabric and decor take first place in the interior of the room.
  • Expands the field of work for design ideas and solutions.
  • Hidden curtain rods are cheaper than standard open-form models.

General installation rules

Much depends on the quality of installation. Inept installation of the structure will negate all the advantages of the latter. Therefore, one cannot be irresponsible about the process of fixing the cornice.

First of all, the high quality of installation is largely due to the presence of preliminary markings - they must be applied with maximum precision, especially in cornices, the main guide elements of which are composite.

The second important point is that in most cases, mistakes made when working with stretch ceilings are difficult to correct. Therefore, you must try to do everything carefully the first time.

Third rule: almost all cornices are attached at the edges, and then the attachment points are at least one and a half meters apart

And it doesn’t matter whether they directly attract the cornice to the surface, or the installation is carried out using external brackets

https://youtube.com/watch?v=n4tnYeGbdg4

Rating
( 1 rating, average 4 out of 5 )
Did you like the article? Share with friends:
For any suggestions regarding the site: [email protected]
Для любых предложений по сайту: [email protected]