How to choose a wall-mounted sliding clothes dryer?

Almost every home has a washing machine, which makes the washing process easier and faster. But not everyone knows that clothes dryers are also great helpers. After all, laundry dries faster on them, and they look more aesthetically pleasing than ordinary ropes.

Types of dryers

All dryers have different shapes and types of fastening, but have one task: to fit as much laundry as possible in the smallest space.

One of the classifications of dryers is the difference in design:

Stationary

The simplest design. The stationary dryer does not change its position, so it only needs to be installed once and then it is always ready for use.

Sliding

Among sliding dryers, the most common is the so-called accordion. It is attached to one wall and can be folded out if necessary.

Dryers of a different principle are also used. Their mechanism consists of two parts, which are attached to the wall at the required distance.

When there is a need for a dryer, a set of strings is pulled from the main part to the additional part, using the roulette principle, which are intended for hanging clothes. After use, the tensioned devices can be returned to their original position, thereby hiding unnecessary rods from the ceiling.

Folding

It is also a convenient design that allows you to remove the dryer when there is no need. They can be folded both lengthwise and widthwise. This depends on the form of drying itself, which is available in a wide range.

"Elevator" design

This type of clothes dryer has fundamental differences from the previous ones. The rods used for drying clothes are thicker, and there are ropes threaded inside them, with which you can adjust the height of the rods.

Thus, the dryer is hung from the ceiling, and when it becomes necessary to hang wet laundry, you just need to pull the rope to lower one of the rods.

Any position in this mechanism is fixed, so you can hang the laundry, and then pull the rope again so that the bar with the already hung laundry rises back up. This original mechanism is suitable for short people who find hanging laundry from the ceiling inconvenient.

Clothes dryers can also be classified according to the principle of fastening and installation. They are wall, ceiling and floor.

Let's look at their differences and features.

For wall mounting

There is a wide range of dryers that are mounted on the wall. They can be small, large, sliding and tensioning.

All of them must be securely attached to the wall so that when the load from wet laundry appears, the fastenings do not loosen. Wall dryers in the form of an accordion are considered more convenient. They take up little space and are designed for loads up to 10 kg.

For ceiling mounting

Like wall-mounted, ceiling-mounted dryers have a wide range of removable and stationary variations. Without any problems, you can choose a dryer of any shape and size, the main thing is to securely attach it to the ceiling.

For floor installation

Floor dryers are the best option, but it is not advisable for owners of small apartments to use them. They are easy and quick to install and also fold up seamlessly. When assembled, the dryers take up minimal space, and when folded, they can withstand a load of up to 20–30 kg.

Balcony “liana”: design features

On sale you can find ceiling-mounted “liana” dryers for clothes on the balcony and wall-mounted models of various sizes.

Wall mount option

The design is simple and is a combination of crossbars located horizontally and strong laces with which control is performed. Crossbars are hollow rods made of metal with anti-corrosion coating or plastic. Their length varies from 0.5 m to 2 m, but models of sizes 1.5 m, 1.9 m, 2 m are more common on the market.

Plastic is good because it is light weight, but its strength is not always confirmed. Over time, the rods may become cracked, deformed and turn yellow. Aluminum crossbars are a little heavier, but stronger. The most reliable and wear-resistant are steel rods, but they create additional stress on the cords, which wear out faster.

Photo of working nodes of the “liana” on the balcony

The main load falls on two steel brackets, fixed with self-tapping screws to the ceiling or wall. Rollers are inserted into the brackets, making it easier to adjust the cords. Strong nylon laces, on which the rods are strung, are collected and fixed in one place - on a wall block (“comb”).

Scheme of “vines” with crossbars lowered down

Manual control. To lower the horizontal bar down, loosen the lock and lengthen the operating cord. The rod is lowered to a height convenient for hanging laundry. Then the cord is pulled and fixed - the crossbar along with the things rises to the ceiling. As a result, items of clothing or sheets do not create obstacles to movement, as they are located in a favorable, usually unused area.

Electronic dryers

On conventional stationary dryers, laundry dries at the expense of the air temperature in the room, but on electronic dryers, drying is much faster. The ropes of such dryers are heated to a temperature of 50–60°, which speeds up the drying process, but at the same time eliminates the possibility of burns from touch.

Like stationary ones, electric dryers can be:

1. Ceiling. It is usually 1-2 meters long and can accommodate up to 35 kg of laundry.
2. Wall-mounted. Length is about 1 meter, can withstand loads of up to 15 kg.
3. Floor-standing. A convenient option due to the ability to move, as well as a wide range of shapes, sizes and colors.

The main disadvantages of electronic dryers are: energy consumption and the need to use adapters if there is no outlet nearby.

The best manufacturers

The choice of model should be based on your requirements, preferences and financial capabilities. Manufacturers whose products are distinguished by their special quality, convenience and attractive appearance:

Electric clothes dryer

• Brabantia;
• Liana;
• Gimi;
• Leifheit.

The price of products differs depending on the manufacturer, the materials used, design and design features. There are very interesting variations, and there are also classic dryers. To buy the best option, you should carefully analyze the product, namely: the ratio of price, quality and proposed functionality.

Advantages and disadvantages of a wall-mounted sliding dryer

Like any product, a wall-mounted clothes dryer has its positive and negative characteristics:

Advantages:

1. Space saving. Manufacturers of dryers try to make them as spacious as possible and at the same time small in size. Thoughtful design and the absence of constantly stretched ropes will not interfere at all when taking a bath or other activities.
2. Diversity. There is a wide range of wall-mounted sliding dryers. You can choose either the smallest one, which resembles a heated towel rail, or the largest one, which can hold 25 kg of laundry.
3. Reliability. Manufacturers use materials that will help the dryer last for many years, so that owners do not have to worry about replacing clothes lines or purchasing a new clothes dryer.
4. Versatility of location. Wall-mounted clothes dryers can be located not only in the bathtub, but also, for example, on the balcony. Their design will allow the ropes to be positioned at a convenient height so that hanging and removing laundry does not cause inconvenience to the owners.

Flaws:

1. Reliability of fastening. The fastenings in the wall bear a large load from the weight of wet laundry, so when installing the dryer, it is necessary to securely attach it to the surface.

How to choose a clothes dryer?

When choosing a dryer, you need to consider the following factors:

1. The first step is to decide where it will be located. Based on this, it will become clear which type to choose: wall-mounted, ceiling-mounted or floor-mounted. It is imperative to take into account the fact that dryers installed on the floor take up a lot of space and are therefore completely unsuitable for apartments with narrow corridors and small rooms.
2. You should also pay attention to the material from which the dryer is made. Stainless steel allows the dryer not to deteriorate due to constant contact with moisture.
3. And another important factor is the volume of laundry that will be dried. Floor dryers, for example, are designed for a small number of items, but the drying speed is much higher than that of wall and ceiling dryers.

Let's summarize all the characteristics that you should pay attention to when choosing:

• type of construction;
• fastening type;
• product material;
• dimensions;
• the amount of laundry that can fit;
• weight of laundry that can fit;
• the ability to adjust the location of the rods;

Console or sliding (accordion) models

The design looks like a kind of “accordion”, which is very simply and quickly fixed on one of the walls, and, if necessary, can be easily pulled forward.

Such a device is not able to hide free space in the room, since immediately after use it is pressed tightly against the wall surface.

Sliding type dryer

The main disadvantages of console models include the excessive compactness of the models, which makes it impossible to use them for drying too large laundry, such as duvet covers and sheets.

Operating rules

The lifespan of the dryer will help prolong its proper use. Experts recommend regularly using the following tips:

1. In a timely manner, monitor fraying cords and wear of other parts.
2. Wipe plastic tubes after each use of the dryer.
3. As the bracket or gear wears out, replace the parts with new ones in a timely manner.

Creaking of the rods can be avoided if you regularly lubricate them with technical oil. You can replace gears and other similar parts yourself. The necessary components are sold in any specialized store.

Rope folding models

Designs with a traditional rope mechanism are very popular among domestic housewives. As a rule, ropes stretched between two opposite walls can easily accommodate a fairly large amount of wet laundry.

Folding dryer model

The rope tension is adjusted using a special drum. Installation of rope structures is always carried out only permanently, therefore, before performing installation work, it is very important to correctly select the location of the structure and the optimal height of its fixation.

Rod folding models

This type of design can easily be installed on any convenient wall in the bathroom, on a balcony or loggia. To hang wet laundry, simply lower the rod element down, positioning it at the height that is most convenient for use.

After hanging things, the bar rises to its original position, so the laundry being dried does not interfere with the free passage of people or the use of all free space on the floor.

Rod wall-mounted clothes dryers have proven themselves to be excellent for drying wool products.

Thanks to the peculiarities of the rod design, any knitted items do not stretch out and dry quickly enough.

Installation instructions for the Liana dryer

Each Liana for drying clothes is equipped with detailed assembly instructions. The instructions indicate the mounting diagram of the device and contain a list of components with a detailed description of the installation process.

Following the instructions, it is not difficult to assemble a ceiling- or wall-mounted clothes dryer.

Where is the best location? Choosing a convenient place

It is most convenient to use a vine for drying clothes on the balcony if you buy a ceiling version of the design.

A ceiling dryer installed on the balcony will allow you to make maximum use of its space for drying washed items. Due to the fact that all the rods can be raised if desired, it will not interfere when not in use.

For a bathroom, it is best to use a wall-mounted design. It is most convenient to place it on the wall opposite the bathtub - this will avoid splashes of water on clean linen.

If possible, you can place a Liana ceiling clothes dryer in the bathroom. A good place would be to place the device above the heated towel rail; the laundry will dry faster.

Preparing the Product and Tools

Before installing the structure, it must be prepared. To do this you will need:

• remove all packaging materials;
• lay out the parts on a flat surface;
• check the number of parts with the quantity specified in the assembly instructions.

Installing Liana does not require special skills, and to attach it to the surface you will need a minimum set of devices:

• perforator;
• screwdriver;
• pencil or marker.

Installation of dryer on walls

The wall covering or finishing material must withstand the weight of the structure under load. Installation must be carried out as follows:

1. Attach the brackets to the place where they are fixed.
2. Mark the locations of future holes with a pencil.
3. Use a hammer drill to make holes in the wall.
4. Attach the supporting structures with self-tapping screws.
5. Insert plugs for self-tapping screws.
6. Attach the fixation block to the opposite wall using self-tapping screws so that it can be easily reached.
7. The ropes included with the rods must be passed through the roller of the right bracket.
8. Thread a long rope through the left bracket.
9. Pass both short ropes with tubes and long ropes through the right bracket and through the bracket mounted on the wall.
10. In the same way, secure all remaining cords with rods.

Once you have installed all of the supplied tube plugs, you are ready to complete the installation of your clothes dryer.

Installing a dryer on the ceiling

To attach the device to a ceiling slab, follow the same rules as for attaching the device to a wall, performing each step in turn.

It is important to hang the Liana on the balcony in such a way that it does not interfere with the free opening and closing of the balcony doors. To do this, it is important to choose the correct width of the device, having previously measured the distance to the window.

Common mistakes when installing a dryer

When installing the Liana dryer, you can make a number of mistakes that will lead to incorrect installation of the structure and difficulty in its further operation:

• incorrect measurements, as a result of which the brackets are attached incorrectly and the tension of the cords is too weak or strong;
• the use of dowel-nails during installation leads to unreliable fastening of the structure, and in the future to its possible collapse.

Advantages and disadvantages of different types

Sliding structures occupy a minimum of space, are easy to fold and are simply put into working condition. Such modern models are presented in several varieties, which have both obvious advantages and some disadvantages:

• console dryers can be fixed anywhere at a preferred height, including a bathroom, pantry, kitchen, balcony or loggia. The folded product is often used as a towel holder and takes up very little space. The disadvantages of the models are represented by insufficient load capacity (within 7-10 kg), small working surface and inadmissibility of fixation on plasterboard walls;
• exhaust devices are represented by two main elements, one of which has a drum mechanism with rope strings. The drum element is fixed permanently on the wall, and on the opposite surface a special “socket” is installed for the second part of the device and for extending the strings out of the drum. Outside the operating period, the ropes are pulled into the device. Advantages include easily adjustable rope length and versatility. The disadvantages of the design include only the need for the mandatory presence of solid walls that can reliably hold the fixed fasteners;
• telescopic devices are distinguished by their design based on support beams, represented by several retractable sections. The folded clothes rack can be used as a traditional towel rack. Such systems are perfect for installation almost anywhere and have a large number of undeniable advantages, including accessibility and ease of self-installation, modern appearance, easy and quick adjustment to the required width. The main disadvantages of telescopic systems include low load capacity.

The so-called heated towel rails, often used for drying clothes, stand somewhat apart. Electrical systems are represented by a ladder of pipes fixed to the wall. The number and sizes of tubes with heating elements directly depend on the model features of the device.

Popular models

The most popular cantilever designs include:

• Polish aluminum wall dryer Familia 60-PZ, represented by five rods 0.6 m long with a three-meter working surface and a load of 10 kg;
• Italian steel product Gimi Bio Super-80, represented by five rods 0.8 m long with a four-meter working surface and a load of 10 kg.

The most popular exhaust type devices:

• Model from Germany based on plastic and aluminum Leifheit Rollquick-210, having a working surface 21 m long for a maximum load of 7 kg. Has five standard rope strings;
• Italian plastic model Gimi Rotor-6, which has a working surface 21 m long for a maximum load of 10 kg. Has six standard rope strings.

Cost of models

Wall-mounted models differ not only in design and material of manufacture, but also in cost:

• retractable plastic model CD-2021 - 580 rubles;
• folding model Leifheit Telegant Plus-100 - 3000-4500 rubles;
• rope system Leifheit RОLLFIХ-210 — 2673 RUR;
• folding system ZALGER Briz - 530 rubles;
• folding system Leifheit TELEGANT PLUS-70 - 2500-4505 rubles;
• sliding system Leifheit Teleсlip-100 - from 4,700 rubles;
• Classic Comfort-70 system - 2800 rubles;
• sliding design Artex - 2100 rub.

DIY materials and making

To make the simplest wall-mounted clothes dryer, you need to prepare the materials presented:

• a piece of stainless steel pipe D=20-30 mm;
• wooden blocks 60-80 mm thick - 4 pieces;
• springs;
• strong ropes.

Homemade wall-mounted dryer model

Self-production technology:

• preparing brackets from bars by drilling holes in them in accordance with the diameter of the pipe;
• fixing brackets on opposite walls;
• drilling holes for ropes on the right side, maintaining a distance of 10-15 cm;
• installation and fixation in the holes of the pipe brackets;
• fixing the springs on the left side of the structure;
• tensioning rope strings on springs.

Tips and tricks

A correctly chosen design of a wall-mounted clothes dryer is a guarantee of long-term and trouble-free operation of such a practical device. It is necessary to take into account the area of ​​the room allocated for the installation of the drying system and the presence of main walls in it.

The service life also directly depends on the materials used in production. Aluminum products are affordable and very easy to install, but it is recommended to give preference to more reliable stainless steel clothes dryers coated with special moisture-proofing agents.

Thus, wall-mounted dryers have proven themselves to be excellent due to their compactness, functionality and practicality, which is due to the peculiarities of fixation, and the fairly high installation makes the wall-mounted structure also very advantageous from an aesthetic point of view.

For many people, drying clothes after washing can be a challenge, especially when there are a lot of items to dry. Bathrooms and balconies usually have small areas; drying facilities are not always provided. Then you should think about purchasing special structures for hanging laundry after washing. There are various types of devices on sale that can be installed in any room and can be easily folded after use. This design is considered a wall-mounted clothes dryer, convenient in any bathroom, regardless of its size, because it is installed directly on the wall. But it’s worth considering all the features of the device in advance.

Installation Rules

Like any other functional accessory, dryers require compliance with installation rules. If you do everything correctly, the product will last as long as possible. To install a wall-mounted dryer, follow these instructions:

1. Mark where the holes will be located. It is important that they exactly match the model’s mounts. To do this, mark the drilling location by placing the dryer where it will hang.
2. Insert dowels into the holes, and secure the brackets themselves with self-tapping screws. Most often they are included as standard.
3. Secure the products. At this stage it is necessary to carefully and carefully place the external parts of the model. The stability and service life of the structure depends on this.

If all steps were followed correctly, no difficulties will arise during operation. For better fixation, take repeated measurements before installation and check the location of the fasteners several times. An incorrectly mounted model will not serve for a long time and will quickly break under the weight of the laundry.

Please note: if you decide to install an electric wall-mounted dryer in your bathroom, you should take care of the wiring in advance. It must withstand sufficient voltage and be safe to use.

Advantages and disadvantages

For many people, the dryer is the only solution for drying washed clothes. But the size of the room simply does not allow for the installation of large structures. But due to the fact that many stores are simply overwhelmed with a variety of devices of this type, choosing a compact, but at the same time multifunctional model will not be difficult. A wall-mounted clothes dryer for the bathroom combines all these qualities, and it is suitable for bathrooms of any size.

This device has a number of advantages:

• compact dimensions - wall structures have small dimensions, so they can be easily used anywhere;
• functionality - the models of these products have a sliding design, which, if necessary, can be expanded into a wide area for drying things and folds into a compact product;
• Easy installation - you can easily install it yourself. To do this, you do not need to have much experience, you just need to have available equipment and desire;
• simple operation - using these products is easy, it does not require superpowers;
• strong base - often made of durable materials - high-strength plastic, iron.

A bathroom dryer may also have negative features:

• Wall structures are not always large; they often have a small area for drying;
• low degree of load - the maximum load can reach up to 10 kilograms;
• low strength of fastenings - under the weight of laundry, fastenings wear out, crack, and break.

If there is no free space

Dryers built into furniture

Such a device consists of elementary metal rods that are part of various reinforcement elements. Wardrobes, cabinets and chests of drawers are often equipped with dryers.

When folded, the device is completely invisible. Such a dryer can be integrated into the design if the color of the device matches the color of the furniture.

Dryer for small items

A pull-out drying rack fits under a bedroom table or on a kitchen counter, making it easy to hide when not in use. It is perfect for a small apartment due to its small size and functionality. But, like the folding model, it can only be used in conjunction with another dryer or for drying small items (underwear, socks, tights, T-shirts, children's clothes).

Battery mounts

This option is ideal in winter, early spring or late autumn, when the heating season in apartments lasts. We are talking about drying things quickly. Even if you have a balcony, this model of dryer will be no less relevant, because when it rains or snows outside, clothes will not be able to dry for a long time. And around the radiator it is enough to hang clothes overnight so that they dry completely.

Bathroom dryer for delicate clothes

Such devices are the best helpers for the housewife. They are light, compact, and, if necessary, can be folded and easily moved to another room. The most important thing is that such devices are suitable for drying delicate clothes, which are contraindicated to hand-wring or dry in a washing machine. Just hang them on the dryer and the water will flow straight into the bathroom.

Dryer over washing machine and octopuses

Drying rack above the washing machine, used for towels, shorts, trousers.

There is also an octopus hanging on it with hooks for socks and other small things. Also save a lot of space because one stack of socks can fit two.

Overhead dryer

There is also another drying rack outside the bathroom. This is a clothes dryer on the door to the children's room. I ordered from Ozone or Wildberry a long time ago. There's a lot in it. 4 towels or pillowcases. You can hang a sheet or duvet cover or blanket folded in half on the bottom bar.

Dryers built into furniture

Such a device consists of elementary metal rods that are part of various reinforcement elements. Wardrobes, cabinets and chests of drawers are often equipped with dryers.

When folded, the device is completely invisible. Such a dryer can be integrated into the design if the color of the device matches the color of the furniture.

Mobile open hanger

Types of wall-mounted clothes dryers

Wall products can be produced in different types and types, but they are all installed on walls. They can have a stationary or sliding design. To understand the features of these products, it is worth carefully considering all types and their characteristics.

Stationary

Stationary structures are conventional rope dryers. They consist of stretched ropes. A rope dryer is usually installed above the bathtub. Since it has a fairly compact size, after installation it does not bother anyone and fulfills its purpose.

Roller rope products are considered the best option for stationary products. The main advantage of these products is that they can be used even if there is no full access to the entire length of the rope. The rope is fixed on rollers, it can be easily moved; to do this, just pull the area of ​​any of the parts, pushing towards you the thing that is difficult to reach.

Stationary ones can be installed in the bathroom, on balconies. Often roller structures are installed on loggias, on the streets near a window. Roller ones provide full access to the entire surface of the ropes and prevent clothes from suddenly falling when hanging.

Video

After watching the video, you will become familiar with the procedure for installing a ceiling dryer-liana on the balcony:

Electronic engineer with many years of experience. For several years he was involved in organizing the repair of household appliances, including washing machines. Loves sport fishing, water tourism and travel.

Found a mistake? Select it and click the buttons:

For washing small items on the road or in a hotel, it is convenient to use a regular plastic bag. Socks or tights are kneaded inside a tied bag along with water and a small amount of detergent. This method allows you to pre-soak things and wash them without damaging the fabric or wasting a lot of powder and water.

Washing machines equipped with the “No Iron” or “Easy Iron” functions can wash clothes with little to no wrinkling. This effect is achieved through a special approach to spinning - it is performed at low speeds, with long pauses, and a small amount of water is retained in the tank.

There is a washing machine “for bachelors”. Linen washed in such a unit does not need to be ironed at all! The thing is that the device does not have a drum: some things can be placed inside the container directly on hangers (for example, jackets and shirts), and smaller things (for example, underwear and socks) can be placed on special shelves.

There are a variety of balls that are used in the washing machine. Antistatic ones will prevent the fabric from sticking to the body after washing, balls with special loops will “comb” the lint and prevent the appearance of pills, and silicone ones with pimples will prevent fluff from matting when washing outerwear.

Washing machines have something to do with the origin of the expression “money laundering.” In the 1930s, American gangsters used a network of laundries as a cover for their illegal activities. By passing off the proceeds of crime as proceeds from cleaning clothes, they turned “dirty” money into “clean” money.

Manufacturing materials

The dryer can be anything - rope, folding, sliding, electric, but in any case it is important that it is made of high-quality material. Therefore, it is important to know what materials wall dryers are made from:

• rope products are low in cost, but they have a rather fragile structure. The base is usually made of plastic, which cracks and breaks over time. Under the weight of the laundry, all the ropes sag and wear out;
• Aluminum dryers have a much stronger base, but it is often deformed. Since aluminum is a fairly soft metal, after some time during use, dents and deformations appear on the surface of the product. The metal oxidizes, which can ultimately lead to stains on the clothes being dried;
• Steel products are considered the most durable, but they have a high price. But the increased cost is fully justified by its strength characteristics. The product can withstand increased loads, does not deform or break. Dryers made of steel have an increased service life; even after 10-15 years they completely retain all their original qualities.

Features of choice

In order to purchase a high-quality product for drying laundry, you should pay attention to the important qualities of this product, namely its intended function and strength characteristics. The further wear and tear of the structure will depend on how correctly this product is chosen.

Recommendations for selection are as follows:

• type of construction - this criterion depends on how large the bathroom is. If the room has a small area, then you can use sliding or folding models. When folded, they take up very little space;
• degree of load - it is advisable to purchase products with a load of 10 kilograms. It is also worth remembering that rope products should not be overloaded, otherwise all the ropes will sag in the future;
• material of manufacture - it is better to purchase steel products, they have high strength and wear resistance. However, these designs have a high cost.

A wall-mounted dryer is a convenient option for small rooms – bathrooms, balconies.

These products are practical and convenient to use, especially in winter, when it is not possible to dry clothes outside. But still, when choosing these products, you should pay attention to all the pros and cons of these designs. You also need to consider the type and design of this type of dryer.

Drying laundry

Drying clothes outdoors is an ancient method.
The laundry dries quickly, is not saturated with mold and household odors, and the humidity in the apartment does not increase. However, there are many restrictions. You can dry clothes outside, if the yard is quiet and uncrowded, and there are devices for pulling rope. But even in these cases, it is better to keep an eye on your belongings.

You will not be able to dry your laundry outdoors in rainy weather. Even in winter it is impossible to dry it in the open air.

When there are no conditions for drying outdoors, you should take care about choosing a place and method for drying clothes in the apartment. This could be a bathroom, kitchen or other room; A wide variety of devices and designs can be used.

Before purchasing a dryer, you need to decide on its location. It is necessary to have clear dimensions of the device so that there are no difficulties with installation in the future.