The window between the bathroom and the kitchen is an echo of the past, when its presence was mandatory. It performed many functions, the most important of which were: visual expansion of the kitchen space; source of lighting with a burnt out light bulb in the kitchen.
Why is a window between the kitchen and bathroom needed now? However, the layout of modern apartments is such that this window has become only a “blank spot” in the impeccable furnishings of the apartment. The same situation is with old, Soviet-style housing: the variety of building materials makes the presence of a window poor and spoils the design of the kitchen. And there is only one way out: to seal this opening. You can find out how to install a window between the bathroom and kitchen in the article.
Blind seal on both sides
Putting out a window and leaving everything as is means contributing to the presence of a hole in the wall. Therefore, you should go the other way - organize a flat wall. To do this, you can use the following tools:
- Cover the window with bricks or foam blocks.
- Use drywall.
- Make a mortar from cement.
All of the above methods have their own characteristics.
Useful article “Which flooring is best for the kitchen: analysis of materials” Are you interested in a Roman blind for the kitchen? Here are photos and analysis of the assortment.
Follow the link: features of kitchen renovation 9 sq.
Bricks or foam blocks
So, covering a window with bricks or foam blocks is the simplest and least expensive method. The brickwork can be covered with wallpaper or some paintings on top. As for foam blocks, they should be installed using construction adhesive. The organization of the process is built according to the following scheme:
- To begin, carefully remove the glass. This can be done using a self-tapping screw or by bending the wooden strips holding the window in the opening.
- Then the frame is removed.
- The freed opening is cemented.
- The brick is laid on it, and the foam blocks are placed using an adhesive solution.
- If small holes remain in the masonry, they must be filled with scrap and cement mortar.
- Plaster is applied to the wall and leveled using a spatula.
- Everything is covered in different variations of finishes.
Alternative options
What if you don’t follow the line of least resistance, and it’s interesting to play with this design flaw? In this case, the window turns from an annoying design misunderstanding into a full-fledged element of the interior. Let's see what we can come up with and mark interesting ideas for our future experience.
Plastic window
Take all the necessary measurements and order from specialists the production of a plastic window equipped with a special tilt-and-turn mechanism. It will easily fit into the opening and will allow you to maintain a pleasant and aesthetic appearance.
The window can be made with bars so that air can circulate freely from one room to another - reducing the likelihood of condensation and mold.
Stained glass
A chic option for decorating a site, allowing you to radically change its perception.
Glass can be selected either whole or divided into segments. In the latter case, it is better if these segments are painted in different colors.
If stained glass seems like an ambitious but expensive project, you can lower your budget by using special stained glass film. Due to the fact that it changes the color of the rays passing through the glass, you can get a surprisingly pleasant light mood.
Add here another interesting drawing or pattern - and you will get a real interior revelation, created literally from nothing.
However, even ordinary translucent stained glass looks quite stylish and modern.
Greenhouse
The window can be used to place a small flower bed on it. You have two great options at your disposal:
- design an open mini-greenhouse, in which flowerpots with plants are simply placed in a niche on the kitchen side;
- place the plants on the side of the bathroom so that they can be beautifully viewed through the glass in the kitchen.
In the second case, additional finishing with an LED strip suggests itself. Or any other lamp that can highlight the beauty and freshness of your improvised mini-greenhouse.
Storage niche
It can be decorated both in the bathroom and in the kitchen. You just need to disguise the opening to match the finish of the wall. If you have tiles, then it would be optimal to use its fragments to design the length and height.
But whether to use the formed niche specifically for storage or to extract aesthetic benefits from it and place all sorts of interesting souvenirs and accessories is up to you.
Cement
When cementing the opening, make a thick solution. After this you can start working:
- Take out the glass.
- Attach a special mesh to the frame.
- Cement is poured in several layers.
- After each time it is necessary to level it and dilute it with a small amount of water.
- There should be about 5-6 layers in total.
- After drying, the wall can be finished with tiles, panels or wallpaper.
This method is the most effective. However, it also has disadvantages: it requires quick casting and smoothing - otherwise, everything will seize and you will have to redo everything.
How to seal an opening
Decorative closure. Just to make it beautiful
If you do not plan to hang a cabinet in the place of the former window, it is enough to align the walls on both sides: the cavity inside will not interfere. Almost any materials will do for this:
- Plywood
- Drywall
- Fiberboard
After attaching them, all that remains is to glue the wallpaper/level and paint the walls/sew up with PVC panels - the plan of action depends on your finishing preferences. On the bathroom side, if desired, you can even make small shelves in a niche in place of the former window.
Functional sealing. Hanging a locker
If you plan to hang a cabinet on the kitchen side instead of a window, the niche must be thoroughly sealed. The following will work for this:
- Foam blocks
- Bricks
- Cement
- Frame made of metal profiles
After using any of the methods, the former window must be puttied and leveled with the wall. After this, you can begin decorative finishing and installing cabinets.
Beautiful niche on the side of the bathroom
Sometimes, when planning the design of an apartment, absolutely every corner may be needed. And there’s a whole window between the kitchen and the bathroom. Therefore, if you don’t like the ways to seal the window between the bathroom and the kitchen, you can use it more practically - make a beautiful niche.
The organization of this process includes the following stages:
- It is necessary to remove the glass and place a sheet of drywall into the hole.
- The resulting niche is treated with plaster and then decorated with any type of decor. Most often, the one that was used throughout the bathtub is used to match the color.
- You can equip the niche with glass shelves.
- Thus, we get a wonderful place for arranging all hygiene products or some trinkets.
- If you absolutely do not like a small niche, you can organize additional construction work and make a wonderful niche for installing a large number of shelves.
Dismantling the frame
First you need to dismantle the frame of the old window, for which you arm yourself with a nail puller and a hacksaw, after first removing the sashes or, at worst, removing the glass. First, the platband is removed, then the frame is sawed on one side and the frame is pressed out with a nail puller and removed in pieces.
In some cases, the window is held so weakly that, after removing the casing, you can simply push it out of the bathtub into the kitchen or vice versa - depending on your luck. There is no need to swing a hammer behind your ears - the tiles in the bathtub or on the kitchen side may fall off and you will find yourself another piece of unnecessary work.
Decorative window decoration from the kitchen to the bathroom
If the window from the kitchen to the bathroom seems quite acceptable to you and fits perfectly into the interior, then you shouldn’t get rid of it. All that is necessary in this case is to decorate it. Perfect for this:
- Glass blocks.
- Stained glass windows.
- Mosaics.
- Double-glazed windows.
For any of these options, the following scope of work is carried out:
- The old window is carefully removed. The frame remains in place.
- Cement the entire opening.
- Carefully install the new glass.
Modern wood-effect kitchens are the best choice for your home. Design and photo of a kitchen in Provence style - create a relaxed romantic atmosphere.
Materials and tools
To work with a window, the following set of materials and tools is required:
- Bricks.
- Sand.
- Cement.
- Putty.
- Emulsion based paint.
- Construction adhesive.
- Tile.
- Means for filling cracks.
- Pickaxe or hammer.
- Fine mesh.
- Wire.
- Grater and set of spatulas.
All the tools described above are ideal for all types of work.
Cement mortar
The low-cost and most common way to remove a window from a bathroom is to use cement mortar. Materials you will need:
- cement (no more than 7 kg);
- sand;
- water;
- a sheet of chipboard (the cement mortar will be held on it);
- metal grid.
Anyone can mix cement mortar.
Stages of work:
- Removing the old frame. First remove the glass. This must be done with extreme caution so as not to get hurt. Then, using a nail puller or a large screwdriver, the trim is separated from the wall. The fate of the frame itself will be decided by the owner himself, but it is better to leave it in place. The walls in such apartments are thin and by knocking out the frame, you can break out a section of the wall itself. The frame will not interfere with further work in any way. It is convenient to attach chipboard and mesh to it. Before moving on to plastering, it is recommended that you strip and prime the old frame.
- Preparation of the solution. To do this, mix a cement solution with sand in a ratio of 3:1. Using a trowel, carefully spread the solution onto the supporting base (chipboard sheet or other similar material). You can’t apply a thick layer at once, it won’t stick. Do this in at least 4 passes on each side, allowing each layer to dry. When the last layer is applied, you need to wait until it dries. The whole work will take a couple of days.
- Alignment of walls. To do this, use a painting mesh, which is wound on a small block or a special handle is used. The grid gives a rough alignment. Finally, the surface is sprayed with a liquid solution and rubbed with a rag or hard sponge. The result is a section of the wall that can be decorated with tiles, wallpaper and other finishing materials.
Treat the leveling process properly
Whatever method is chosen, it is important to do the waterproofing correctly. Exposure to water and steam can ruin any decorative surface. Penetrating through a leaky wall, moisture can cause deformation of tiles and wallpaper. To prevent this from happening, finishing the walls in the bathroom should begin with their waterproofing. For this, special bitumen compounds are used, which are applied to the walls in 2 layers. You can lay tiles on top of them or attach panels.
conclusions
It’s easy to make a wall instead of a boring window! It is enough to choose the appropriate material. There are many ways to decorate a finished wall. To seal glass, you need the entire set of suitable tools listed above. Do you have nowhere to place shower gels, soaps, creams and much more? The answer is simple: you need to make a convenient niche in place of the window.
Do you want to see your bathroom in an unusual design? Install stained glass or mosaic windows, and the entire bathroom will be illuminated with unusual colors. Don't want some colors? Install economical double-glazed windows with the ability to ventilate the bathroom.
