Characteristics and description of the profile Rehau Intelio/Intelio 80 mm

Advantages of Rehau Intelio 80 mm profile

• The low height of the six-chamber profile allows significantly more sunlight to pass through.
• The ability to install wide double-glazed windows provides improved heat saving and noise insulation.
• A new type of seal provides high tightness.
• The division of the profile into two autonomous chambers due to the convection limiter helps to reduce the level of heat loss.

The Rehau Intelio 80 profile system has the highest level of sound insulation and is rightfully considered the “quiest” Rehau profile. Rehau Intelio 80 windows provide an indoor level of 30 dB (noise level during sleep).

Window systems 80+: review of new products

As an advertisement

It is no secret that today windows made from PVC profiles are mainly used for glazing country houses. However, not every homeowner, when choosing, thinks about the most important technical parameters of window structures, such as system depth and the number of chambers. It would seem, what is there? A PVC window is in any way better than obsolete woodwork, which means that something mediocre will do. Let’s assume that for a seasonal house or a modest dacha, this approach is quite justified. But if we are talking about a solid house, a “fortress house” that not only embodies dreams of country life, but also meets energy efficiency parameters, the buyer should pay attention to windows with a system profile depth of 80+.

Let's look at the advantages of such structures, why they provide increased comfort and what opportunities they open up in architecture using the example of the INTELIO 80 and GENEO RAU-FIPRO X profile systems from one of the leaders not only in the domestic but also in the European market - the REHAU company.

But, first of all, let’s clarify the concept of system profile depth. What does its numerical designation hide behind? System depth is the thickness of the profile in horizontal projection, indicating the distance the frame occupies in the window opening. And most of the consumer characteristics of a plastic window, such as thermal insulation, noise insulation, burglary resistance, etc., directly depend on the system depth - the greater it is, the higher the characteristics. Next, you choose for yourself exactly what characteristics and to what extent the window should have. It is quite possible that for an apartment in a residential area or a country house for seasonal living, you will not need the maximum possible characteristics of translucent structures. But if you have a cottage or windows in an apartment overlook a noisy street, and if these are also floor-to-ceiling windows or panoramic glazing... Then you should pay attention to windows with a profile of 80+. Window systems with an installation depth of 80+ are chosen by homeowners who value comfort, who want to save on heating costs and protect themselves from street noise.

INTELIO 80

A new product from REHAU with improved thermal and sound insulation characteristics. Due to the depth of 80 mm, the window profile consists of 6 air chambers (the same figure for a typical window has 3-4 chambers).

The six-chamber INTELIO profile is:

• Unsurpassed sound insulation. In addition, the wide profile allows the installation of thick double-glazed windows with noise-absorbing triplex glass, which together provides the product with noise insulation from city traffic up to 40 dBA (sound insulation index up to 45 dB). What does this mean for the average person? With such indicators, the house will be comfortable even if it is located close to the highway.
• Thermal insulation. The number of independent chambers in the profile directly affects the heat loss rate. Air is an excellent insulator, and the more chambers, the better the window system resists heat transfer, the warmer the house will be. Do not forget about the reinforcing metal liner installed in the central chamber. Metal conducts heat well, and the more independent air cavities it surrounds, the better the thermal insulation. Thus, the heat transfer resistance of INTELIO 80 is 0.98-0.99 m²°C/W. For the uninitiated person, this figure means little, so let’s give a comparison: the same indicator for a standard 3-chamber profile is 0.7-0.78 m²°C/W, that is, a third more heat is lost through such a profile. And if you consider that up to 40% of heat loss in a house occurs through windows, then, as they say, feel the difference.
• Structural stability and safety. A large number of INTELIO cameras provide the profile with additional internal partitions, which make the structure more rigid. Add here a high-quality recipe and increased strength of welds and you get windows that are resistant to deformation and maintain a stable geometry over several decades of active use. Note that the maximum size of opening elements reaches 240x110 cm. In addition, armored double-glazed windows can be installed in a wide profile, which cannot be broken with a hammer or shot through; this is impossible in conventional profiles. All other things being equal, such a window is much more difficult to hack than a standard one.

The special properties and unique qualities of INTELIO are not limited to technical characteristics. A description of the system will be incomplete without focusing on the aesthetic component. The sash, rounded on the outside, developed based on current trends in the European market, not only looks good, but also contributes to improved drainage. On the inside, the doors have several design options, including a designer one with a rounded edge, which, together with the wide REHAU color palette, allows you to create a special style in your home. The high light transmission ability of INTELIO, realized thanks to the low profile height, perfectly matches the concept of panoramic glazing.

As a result, the durability of window systems based on the INTELIO 80 profile is more than 60 years.

GENEO RAU-FIPRO X

Another new product from REHAU, which shapes the idea of ​​modern energy-efficient glazing, is the GENEO RAU-FIPRO X profile system. Its main difference is the unique formulation of the profile core, which in 2022 was improved and received the prefix X in its name, and in its composition - two times more reinforcing fibers. Thanks to this, it is possible to produce window structures without the use of steel reinforcement, which reduces their weight by 40% without loss of rigidity and stability. This is not just an alternative to “warm” aluminum or luxury wooden windows; In terms of its energy-saving characteristics, GENEO RAU-FIPRO X has no analogues.

Why does this happen? A 6-chamber profile with a system depth of 86 mm, plus 3 sealing contours and the absence of the need to install steel reinforcement in the window structure provide record performance in terms of heat and sound insulation. The heat transfer resistance coefficient of GENEO RAU-FIPRO X ranges from 1.05 to 1.3 m²°C/W, and the sound insulation index is up to 47 dB.

Technologies used in aircraft construction and the creation of racing cars allow REHAU to create window systems with opening elements measuring 290x140 cm. At the same time, two types of opening are possible for door leaves, both inside and outside.

REHAU GENEO RAU-FIPRO X is not only unsurpassed heat and sound insulation, but also a premium appearance that demonstrates the good taste of its owner. The high-quality glossy surface of the HDF profile does not absorb street dust and impurities contained in the air, making it easy to clean and remaining snow-white throughout its entire service life of 60 years.

GENEO RAU-FIPRO X, like INTELIO, can be decorated in any shade, which opens up limitless design possibilities. Thanks to the low height of the frame and sash, even more sunlight penetrates into the room.

The possibilities of panoramic glazing have never been so clear and accessible. Although fashionable or even luxurious from an aesthetic point of view, GENEO RAU-FIPRO X and INTELIO are, at the same time, a very practical and cost-effective solution.

Subscribe to our Telegram channelExclusive posts every week

Technical characteristics of the Rehau Intelio 80 profile

Let's compare Rehau Intelio 80 (6 cameras) and Delight (5 cameras):

The table below compares the two types of profiles according to key parameters.

Rehau Delight

Rehau Intelio 80

* The coefficient of resistance to heat loss characterizes the amount of heat that passes through the structure. The higher the value of this coefficient, the higher the thermal insulation properties of the structure.

** The height of the frame/sash combination determines the light transmittance of the product. The lower the height, the more light the structure allows through.

You can get more information about other Rehau profiles, as well as compare their characteristics, by visiting the corresponding page of the site.

Leave a request for a call back

To calculate the cost of your products or FREE call a measurer

average cost

When purchasing in Moscow or any other city in Russia from official representatives of the Rehau company, you need to take into account the preferred design, fittings and components. The Intelio profile allows the use of standard glazing beads, which allows you to save money. This advantage becomes especially obvious when purchasing large volumes - several standard windows or panoramic ones.

The average cost of a fixed window 700x1400 mm is about 8,000 rubles, and a turnkey order with installation doubles this amount.

Example of prices at the Windows Fortali company

80 mm system - average price from 7,100 rubles m2

Double-glazed windows for increased comfort

Double-glazed windows with additional options will help create even more comfortable living conditions:

energy-saving double glazing

Retains heat in the room by reflecting heat waves and preventing them from escaping into the external space through a translucent structure.

multifunctional double glazed window

It works in two directions, depending on the season: in the warm season it does not allow the sun's rays to overheat the room, and in the cold season it does not release heat outside, providing year-round savings.

Thermal package

It has increased resistance to impacts, both accidental and intentional, and does not form traumatic fragments, therefore it is an excellent alternative to gratings for the first and last floors of high-rise buildings and private houses.

Impact-resistant glass unit

It is characterized by increased heat and noise insulation, as well as the ability to reflect heat waves into an environment with high temperatures due to silver-containing coating.

Reviews from Rehau Intelio owners

Viktor Petrov, Rostov-on-Don:

“I spent a long time choosing a window for my apartment. I live on the first floor, and the old double-glazed windows do not protect me from the noise of cars. But it is impossible to open the window. I re-read all the reviews about the windows. I decided to stop at Rehau, and then a new product appeared - Intelio. The technical parameters suited me. Additionally, I consulted at a German window salon. After installation, I was pleasantly surprised by how modern window structures can withstand noise.”

Maria Goreiko, Saratov:

“We recently built a house outside the city. It was necessary to install windows. The manager recommended Rehau. Of all the options, I liked Intelio. The volume was needed to be large, and these windows were suitable in price, color, and parameters. I'm glad that they have high protection against hacking. It’s too early to talk about how heat is saved; we need to check it in winter, but the atmosphere in the house is still comfortable.”

Advantages of purchasing windows from Rehau Partner

The company is an official partner of the German concern Rehau, therefore it uses only components that have certificates.

In addition to affordable prices, plasokna customers also expect additional benefits during the purchase period.

Workers who install products are necessarily trained according to a special program at the Rehau Academy.

How can you make windows even warmer and safer?

The use of double-glazed windows with additional functions, as well as special burglary-resistant fittings, will help turn a window structure into a real standard of warmth, comfort and safety.

The product will become warmer thanks to the installed energy-saving and multifunctional double-glazed windows. The room will become safer after installing impact-resistant double-glazed windows and anti-burglary fittings.

PVC window decoration options

4 reasons to order glazing in

How to buy Rehau Intelio windows in Moscow?

Prices for windows from the Rehau Intelio 86 profile (Rehau Intelio 86)

* Prices for Intelio windows were calculated with a volume discount. Window designs are presented in the Rehau Intelio profile with energy-saving double-glazed windows.

Prices for PVC windows Rehau Intelio 80

Price: 8 160

rub. With installation: RUB 15,200.

Price: 12,350 rub.

With installation: RUB 21,850.

Price: 14,850 rub.

With installation: RUB 25,550.

* The cost of turnkey installation includes: windows made of Rehau profile Intelio 80 with thermal package 3.0 and ROTO fittings, delivery and installation of windows, window sills and slopes, waste removal.

** All products are made from certified components and comply with European quality standards.

Two variations: 80mm and 86mm

The premium Intelio 80mm system is a lightweight version of the 86mm system. The latest development is in no way inferior in characteristics, it is endowed with maximum noise, heat and moisture insulation, but at the same time its cost is more affordable for consumers with average incomes.

Attention! Currently, Rehau has stopped production of the model in the 86mm variation. The profile is produced only in 80 mm format.