How to hang blinds on plastic windows: installation instructions

Measurements before installing blinds

You can place curtains inside or above the window opening. If you choose the second option, when measuring, do not forget to add a few centimeters for allowances.

Measurement procedure:

1. Measure the width of the opening and the height of the sash.
2. If you plan to hang blinds on sashes, measure the height and width of the glass.
3. Determine the length and width of the slats.

Optimal allowance sizes

PVC window measurement parameters

Advantages of vertical curtains

Vertical curtains are considered the most popular and common type of blinds. They got their name because of the vertical arrangement of the fabric panels. Compared to horizontal curtains, this type is considered more comfortable and homely.

Advantages of vertical curtains:

• excellent protection from bright sunlight;
• mobility, simplicity and reliability in operation;
• the ability to close large, non-standard window openings;
• wide scope of application.

In order for blinds to last as long as possible, they need to be hung very carefully and carefully. The functional scope of the window structure depends on correct installation.

How to attach blinds to windows with drilling

Almost all types of blinds are mounted on brackets, so the first thing you need to do is fix the holders. If you want to place curtains in a window opening or attach them to the ceiling, the grooves will have to be installed using self-tapping screws. To do this, you need to mark the surface and make neat holes with a drill.

Installation of blinds with drilling

Important! When fixing curtains to a window sash, you can do without drilling. However, if the structure is too heavy, it is better to secure it thoroughly. Holes for brackets must be made in the corners of the window frame.

Self-installation of blinds

One of the advantages of blinds is that you can install them yourself. However, before it comes to this, it is necessary to correctly measure the window opening in order to purchase a product with the required parameters. The measurements are influenced by the chosen fixation method:

1. When attaching to a trim, add 10 cm to the resulting width and height of the window opening.
2. When installing inside a window opening, the height is taken in its pure form, and 1.5 cm is subtracted from the width.
3. When fixing it into a sash, subtract 2 cm from its width and 3 cm from its height.

Note! The ease of use of blinds depends on the location of the control mechanism. If it is intended to install products in both doors, then the cords of different halves should be located on the right and left so that they do not interfere with each other.

Screw fixation options

Fixing with screws is the most reliable, but it is not suitable if you plan to periodically change the method of hanging. After all, after drilling, holes remain on the surface of the window profile. In this case, choose fixation with screws to the wall.

Metering

When installed in a window opening, a total of 4 cm is subtracted from its width (2 on each side) - this value corresponds to the width of the blinds. Their height is calculated as follows: H of the window opening - 2 cm. It is necessary to provide a gap between the upper edge of the window and the blinds so that they do not interfere with its opening.

What to consider when measuring the opening for installing horizontal blinds

Measurements for vertical blinds

For installation outside a window opening, when the room is completely darkened and the window is completely closed, the width of the product is taken as the value of the width of the window opening with an addition of 5 cm on each side. 10 cm is added to the height of the window opening.

Measurements for different fixation methods

When installed in a sash, they open together with the fixed blinds. Their width corresponds to the width of the glass unit with an addition of 1.5 cm to each side. It is important that the blinds do not interfere with the free movement of the window handle.

Window installation

When the window is located in the same plane as the wall, metal brackets are used to fix the blinds, allowing them to be positioned at a certain distance from the window. Add 10 cm to the width of the blinds on each side.

Measuring vertical blinds and control methods

Fixation methods

The use of dowels and screws that correspond to the parameters of the fastenings used will allow you to properly fix the blinds. It is also worth considering the material of the walls and ceiling if fastening will be carried out to them.

Fastening with self-tapping screws to the profile of a plastic window

Note! Before you start drilling holes for fastenings, it is important to make sure that when folded, the blinds installed in the chosen method will not interfere with the free opening of the window. You should also make sure that the proper functioning of the blinds will not be interfered with by objects on the window sill, heating devices and structural elements.

Fixation on a bracket to the wall

The main fastening methods include:

1. Drilling.
2. Fixation with double-sided tape.
3. Fixation with magnets.
4. Fixation on brackets.

Available fixation methods

Options for fastening blinds without drilling

Installation of horizontal blinds

Horizontal blinds are sold complete with a full set of fasteners and fittings. To install them, you only need a screwdriver. But first you need to choose the color of the product.

Plastic horizontal slats imitating wood

Slat color options

Then the window opening is measured.

Measuring scheme

After manufacturing or purchasing the product in the store, they begin to install it.

Table 2. Installation of blinds

In some cases, it may be necessary to adjust the product in width or length. To adjust the width of the lamellas, mark an equal distance on both sides. The lamellas are cut with scissors, and the cornice and rail are cut with a hacksaw.

Trim to width

In order to shorten the fabric, you need to untie the knots under the bottom guide and remove excess fragments. Then the lower guide is fixed in place, the canvas is leveled, the cords are tied and plugs are installed.

Height correction

Many housewives are wondering how to wash horizontal aluminum blinds at home. Such blinds are a convenient accessory that protects the room from sunlight and does not take up much space, but unfortunately, dust and dirt accumulate between the plates. Read more about cleaning methods in a special article.

Video - Installing horizontal blinds

Prices for popular models of screwdrivers

Screwdrivers

Installation of vertical blinds

The design of vertical structures is much more varied than that of horizontal ones. There are many color variations, lamellas with patterns, patterns and photo printing, multi-layer structures. The advantage is that such blinds can be hung on openings of large size and irregular shape - for example, when decorating sloping window openings in the attic.

Web control variations

The main structural elements are: cornice, runners, slats and chains. Window measurements are made after choosing the method of attaching the structure - to the wall or to the ceiling.

To fix the lamellas in a vertical position, there is a pocket with a weight and a control chain at the end of each lamella

Table 3. Sequence of assembly of vertical blinds

If necessary, the length of the lamellas can be easily adjusted. To do this, they are trimmed following the instructions on the packaging. The width of the lamellas is adjusted by removing excess fragments and cutting the cornice with a hacksaw.

Vertical blinds assembly process

When choosing the material for making the lamellas, the operating conditions in the room are taken into account.

Options for design shapes

Installation of roller blinds

When installing roller blinds, there are several ways to fix them. Traditional - on self-tapping screws and alternative - on double-sided tape or a clamp-holder, which is installed on the sash.

Roller blinds are lightweight, so the design can be held on with double-sided tape

Externally, roller blinds are represented by a smooth fabric that curls when lifted into a roll. The canvas is quite dense, so it perfectly shades the room. The width of roller blinds varies, but it is more convenient to attach them to each sash so that the accessory does not interfere with the normal functioning of the window.

The principle of fixing the device with double-sided tape

Roller blinds can be installed without drilling. To do this, the compact upper shaft with the leaf is secured to a special supporting element fixed to the sash. The bottom of the canvas is fixed with magnets.

The special holder does not interfere with the closing of the sash

Note! When installing roller blinds, take into account the distance by which the window handle protrudes - it should not protrude through the canvas. Therefore, fastening is carried out using brackets that form a sufficient distance between the sash and the curtain.

Table 4. Traditional installation

When cutting roller blinds, the metal tube is cut with a hacksaw, and the canvas with scissors. In this case, equal sections are cut off on both sides.

Trimming roller blinds

How to hang blinds on plastic windows without drilling

To install blinds, it is not necessary to use a drill and self-tapping screws. There are bracket plates on sale with a smooth surface that are fixed with adhesive tape. Such elements are used to attach holders directly to the plastic frame.

How to proceed:

1. Using a simple pencil, mark the frame where you plan to fix the parts.
2. Degrease the frame, glue the plates.
3. Insert the brackets into the holders.

Installation of blinds without drilling

Important! Further installation steps will depend on the type of structure.

Conclusion

Installation of blinds can be carried out without hiring specialists; any of the above-described options for carrying out the work can be done even by an inexperienced craftsman. The video in this article will help you understand the topic even better, and if you have additional questions, write them in the comments below.

Did you like the article? Subscribe to our Yandex.Zen channel

September 21, 2016

Accessories,Windows

If you want to express gratitude, add a clarification or objection, or ask the author something, add a comment or say thank you!

How to hang horizontal blinds correctly

Such designs consist of horizontal slats and are considered the most popular. They are easy to use and easy to install.

Installation algorithm:

1. Mark the areas where you will attach the brackets.
2. Check that the points are equally distant from the edges and the middle of the frame and are at the same level.
3. Use a drill to drill holes for the brackets.
4. Secure the brackets using self-tapping screws and a screwdriver.
5. Secure the bar with the canvas in the brackets, turn the latch until it stops.
6. Install the rotating mechanism lever and check the functionality of the structure.

Installation of horizontal blinds

Varieties of design

The type of blinds directly determines the method of their fastening. Without self-tapping screws, you can install roll, horizontal, vertical and cassette structures. It is not necessary to drill the frame for installation; the work takes little time. But you will have to abandon heavy products to avoid deformation or breakdown of the system.

For sashes with a tilting mechanism, it is better to choose designs with horizontal fastening - they will not dangle when the window is opened.

Horizontal

Horizontal blinds are often called Venetian shutters. They are a canvas of many horizontal lamellas (“blinds”, “separate plate”) with a width of 1.5 to 2.5 cm. The slats are made of aluminum, plastic or wood. The horizontal design is equally popular for both apartments and offices due to the ability to choose any colors.

Vertical

Vertical blinds are attached to a special cornice using Armstrong brackets, installing it above the opening (as for simple curtains). To create canvases, dense fabric with impregnation is used - the slats are placed vertically on the rail at the top.

Rolled

If vertical blinds completely replace curtains and curtains, then roller blinds are often chosen as an addition. They are lightweight, transmit enough light, do not require maintenance and can be made in any design. They are made from smooth fabric that can be treated with water-repellent impregnations. Roller blinds are rolled up using a special mechanism.

Cassette

They are somewhat reminiscent of roller blinds, but have a hidden mechanism in the box. They are easy to install even yourself, without drilling the frame. This mini-system became especially popular several years ago, with blackout or zebra (day-night) blinds enjoying great success.

How to hang vertical blinds on a window

The slats of such blinds are located vertically, so the installation diagram will differ from other types of products. For work you will need: a drill, a screwdriver or a screwdriver, self-tapping screws, a building level, a tape measure, a simple pencil.

How to hang blinds on plastic windows yourself:

1. Make markings for the brackets and drill holes.
2. Attach the holders to the wall using self-tapping screws.
3. Insert the cornice into the grooves, press until you hear a characteristic click.
4. Insert the slats into the runners on the plank.

Installation of vertical blinds

Types of brackets

The brackets are what the blinds are mounted on. They are ceiling-mounted, universal and wall-mounted. They are an L-shaped part that resembles a hook. Made from metal, plastic or wood. The choice of material depends on the type of blinds: plastic brackets are suitable for light ones, and steel ones should be used for heavy ones. They are attached to the wall or ceiling with 2 self-tapping screws, which avoids drilling the window frame. Holders are inserted into the grooves, on which the canvases are hung.

The guide rail can be:

• fixed – provides rigid installation;
• inclined – capable of changing the angle of inclination up to 15º;
• composite – consists of 2 parts, allows you to change the angle of inclination and rotation;
• tilt-and-turn are flexible brackets that rotate in almost any direction and are adjustable in length.

Metal brackets are reliable and durable; they can be tightened if they become loose. There are only two drawbacks: the high cost of fastening and the poor color range (metal fittings can be seen on the white frame).

In most cases, such brackets last even longer than blinds, which can tear, fade in the sun or break.

Exploitation

Blinds need proper care. There are a few do's and don'ts to prevent unwanted life reduction and breakdown. If there are animals or children in the house, you need to make sure that the blinds are not pulled. Damage to the mechanism is possible if the blinds are opened and moved frequently. Children can play around in this way, so it is better to place the control element out of the reach of children.

Over time, the blinds will get dirty and gather dust. Blinds made of plastic, aluminum or wood can be wiped with a damp cloth, and canvases made from the material can be washed by disassembling the structure first.

How to order?

You can order vertical blinds in two ways:

- by inviting a measurer with samples at a time convenient for you; - having taken measurements for the manufacture and installation of vertical blinds yourself, indicate them when ordering.

Whenever you order vertical blinds, you will receive comprehensive advice from our specialists.

Self-measurement and installation Measurement of blinds and installation by a specialist Step 1: Measure the window openings according to the selected blinds with a hint from a specialist and send an order from the website with the dimensions and type of blinds Step 1: Invite a measurer by phone or from the website Step 2: The order is calculated by the manager, the cost the order is announced by telephone or indicated in a letter sent to your email; you make a payment to a Privatbank card Step 2: A measurer-designer arrives with product samples, takes measurements and calculates the cost of the order, no advance payment is taken (if the hryvnia exchange rate is stable) Step 3: After 2–7 days you pick up the order at a company convenient for you delivery Step 3: After 2–7 days, the blinds are installed; Having accepted the work, you pay the installer Step 4: Leave a review on the website Step 4: Leave a review on the installer or on the website Blind model Cost Vertical blinds lamella 127 mm Jaluzi Service from 176 UAH/m2 to 697 UAH/m2 (depending on the cost of the fabric) Measurement, delivery, installation one product Rounding in width up to 1 m Rounding in height up to 1.5 m * non-standard installation is considered to be work at a height of more than 3 m, as well as the use of special means and special equipment 80-90 UAH per piece * the amount of measurement and installation is not less than 250 UAH. Call now! And we will give you an additional discount!

Instead of traditional curtains, you can use a variety of blinds for rooms. They are distinguished by style, beautiful appearance, and practicality. Vertical blinds are especially beautiful; they allow you to control the level of light in the room and give the interior the necessary stylistic features.

Installing vertical blinds with your own hands is not so difficult. You can use various methods, attaching curtains to the wall or inside to the slopes. Vertical slats are fixed at the top; a chain is usually used at the bottom for curtains, which does not allow the slats to diverge during drafts.

Vertical blinds are an excellent solution that can replace curtains and serve as good sun protection.

Ceiling installation option

Like the ceiling version of the cornice, for curtains it is possible to install a blind cornice on the ceiling surface. This placement is entirely justified and perfectly decorates the interior of any room; ceiling mounts especially benefit from the height of the lamellas reaching the floor.

However, mounting the cornice to the ceiling cannot always be done; for example, when installing a stretch ceiling, it is impossible to install latches through the surface of the covering sheet.

With the ceiling option, it is often necessary to install the latches on a not entirely flat surface, and when the cornice itself is installed, it will not always fit tightly to the ceiling; if these are small errors, then you can use a decorative strip glued to the cornice. When the differences are very significant, the option involves leveling with the help of linings, but in this case, this option should also have reasonable limits, because the decorative baguette, although it is a flexible plastic tape, is not able to hide large differences.

In general, work is carried out in the following order:

• the distance from the wall at which the latches are planned to be installed is determined;
• using a marking cord, the line for installing the latches is broken off;
• the number of latches is calculated and their installation locations are marked;
• using a hammer drill, holes are drilled and plastic plugs are installed;
• latches are installed with screws;
• then the cornice is attached.

Special mount for installation on Armstrong ceiling rails

The peculiarities of installing latches to the ceiling surface appear only when it is necessary to install a cornice to a plasterboard structure or an Armstrong-type ceiling. Here you need to use special butterfly bolts for installation in the cavity of the ceiling space, or special clamps that are attached to the guides, otherwise the installation process is identical.

Selecting the necessary tool

This type of work will not require you to have a specific professional tool, but the correct selection will greatly simplify the task. It will be easier to do the work, and the result will be much better. So, we need:

• screwdriver (preferably both Phillips and flat);
• a hammer drill or a drill with an impact function (which is better?);
• a set of concrete drills of various diameters and lengths;
• scissors;
• medium sized hammer;
• hacksaw for metal;
• a set of necessary fasteners (usually included with the blinds).