An apartment with a balcony is always a very good purchase. Indeed, in addition to the area of living rooms, the owners of such apartments can also use the space outside them. On a balcony or loggia you can organize not only storage of unnecessary things, but also a cozy relaxation area, workplace or even a small winter garden. In addition, recently it has become fashionable to carry out room redevelopment projects involving the addition of balconies to them. This allows you to significantly expand the usable area and implement many original design solutions.
But if the apartment is located on the first floors of the house, then its owners have an additional headache: how to protect themselves and their property from intruders entering through the balcony? The most common solution to this problem is to install grilles on the balcony.
Helpful information
On an unglazed balcony,
wrought-iron grilles on the loggia must be installed before insulation and glazing, if any, are foreseen. The cost of the product will depend not only on the complexity of the work, but also on the material from which it is made. To prevent the metal from rusting, a special anti-corrosion coating is applied to it, and patina and dyes that imitate noble metals will give the grille an antique look.
Based on their operating principle (method of fastening), the following types of gratings can be distinguished:
- Fixed - the grille is tightly attached to the building, which makes it impossible to break into it, but if a fire occurs, it will be impossible to leave the apartment through such a balcony;
- Hinged ones are very convenient, they should be installed in combination with fixed grilles, equipped with an internal lock, but there is a certain risk of being broken into by robbers;
Swing - Sliding - the advantage is its compactness, the ability to fold like an accordion in one or both directions, depending on the size, that is, they are not bulky and easy to use. They are also equipped with an internal lock, but, like swing doors, they run the risk of being opened. These types of grilles are best installed on the upper floors of a building.
- Removable. The grille can be attached to the loggia with screws and, if necessary, removed, but this will require spending a considerable amount of time and nerves. It is unlikely that any burglar will want to tinker with such a design.
Differences in manufacturing method
In any case, metal grilles are installed on the balcony. There are no other materials available for household use that can demonstrate high strength characteristics, which are the primary criterion for the structures described. But manufacturing methods may differ:
Forged
Beautiful forged fences
Blacksmithing, which originated many centuries ago, is still alive and well. It consists of heating the metal to forging temperature, which, for example, for iron is +800-125 degrees Celsius, and processing it with a hammer in order to give it higher strength and the desired shape. A blacksmith with his own hands is able to create real artistic masterpieces.
The forged rose created by the master is beautiful
As a result, products created using this method can boast the following advantages:
- Exclusivity . Forged gratings can be made to order, which means not only that they will certainly fit the size of your balcony, but will also have a beautiful original look. That is, in the end you will get more of a palace decoration than a fortress fence;
How can such beauty spoil the view of the street?
- Very high strength characteristics . The metal hardened during the forging process acquires unprecedented strength and resistance to corrosion processes. So this design will also cope excellently with fortress functions.
As if with such obvious advantages there seems to be no point in thinking about it, forged grilles are ideal for protecting and decorating any balcony. But it’s not that simple; there are a couple of points that still make you think:
- Quite a high price , which ranges approximately between 2500 and 7000 rubles per square meter. You must admit that not every family can afford such beauty given the current global economic crisis;
To save money, you can install a forged grille only on the balcony door. Thus, a potential attacker will still not be able to get into the apartment, but the area of the structure will be much smaller, and the structure itself will therefore be cheaper.
If you limit yourself to just one balcony door, you can save a lot
- Long production times . If the order is individual, then the approach to its implementation is also special. Therefore, do not wait quickly for the finished design. Although, if your area does not have a high crime rate, then waiting for a while will not cause any difficulties.
Welded
Welded gratings protect your property
The instructions for creating welded gratings look slightly different. Here, electric welding of metal products such as pipes with a round or rectangular cross-section, rods and strips is carried out into a single integral composition. This, of course, has its positive sides:
- Relative simplicity of the manufacturing process . It is also very difficult to qualitatively weld various steel fragments together, and this requires both special skills and special equipment. But, nevertheless, in comparison with forging, this task is performed much easier and faster, so you won’t have to worry about the insecurity of the balcony for a long time;
Welded gratings on the loggia are installed quickly enough
- Less high selling price, which is about 1000-3700 rubles per square meter;
- Less weight . This is also an important parameter, since excessive load on the balcony slab is dangerous, not to mention the curb, which it is advisable to generally strengthen for the installation of fairly heavy forged products.
Thus, all the advantages boil down to the fact that welded “defensive structures” are easier and cheaper to install. But this also leads to the appearance of some negative aspects of the described products:
- Not as beautiful and luxurious in appearance as the type of grating described above. A good craftsman, of course, with the help of welding will be able to create an elegant composition that will decorate your loggia, but his work still cannot be compared with a forged masterpiece;
How to close the balcony grille if you are disappointed in its appearance or you are simply tired of it? Climbing plants! So you will turn the fortification into a living greenhouse with all the ensuing advantages: natural beauty, enriching the air with oxygen, creating pleasant shade from the daytime sun.
Adding a climbing plant significantly changes the appearance of the trellis
- Not so high strength indicators . On the one hand, this option for protecting one’s own apartment will still stop an ordinary thief, but if, suddenly, some serious burglary is carried out, then the forged products will have a much better chance of surviving.
Welded, forged, blown and cast iron gratings. Advantages and disadvantages.
Depending on the functionality of the balconies and their purpose in the daily life of the apartment owner, it is necessary to make a rational choice in the method of producing the grille for the loggia.
Inflated
If there is a storage room or clothes dryer on the balcony, then it would be advisable to manufacture a welded structure. Using electric welding, in a fairly short period of time, you can make a grid of various sizes from steel rods, with the addition of curls, forged elements, and create various compositions from metal parts. In terms of aesthetics, they are not inferior to their “forged competitors”, but the financial costs are much more affordable, and the ease of manufacture allows you to adjust the size of the structure or finish it right at the installation site.
Forged grilles on the balcony are a unique element of room decor. In the process of labor-intensive and lengthy work, a master can make a highly artistic work of art from hardened steel, which, first of all, will become a decoration for a balcony or loggia, and only then its protection. Due to the complexity and duration of the process, the peculiarities of the production of the product, its cost is quite high and not every apartment owner can afford such luxury. During processing, the metal acquires a high level of moisture resistance and strength.
Little greenhouse
If you are a flora lover, then an inflated balcony trellis will help make your dreams of a small flower garden come true. The shape, curved towards the bottom, allows you to display flower pots on the structure. You can also fix curls and forged elements on such gratings, depending on your imagination and the level of skill of the specialist.
Cast iron grates are an echo of the last century. In terms of their characteristics, they are inferior to modern steel products; in the weight category they are quite heavy, and their anti-corrosion properties leave much to be desired.
Forged fences
This type of fencing combines both protective and aesthetic functions. Forged gratings are combined with stone, brick and wood, which is why such products are in demand among owners of country houses, cottages and dachas.
You can come up with the design of forged grilles yourself; this has a big advantage, which is uniqueness and originality.
The shape of such gratings is very diverse:
- rounded;
- rectangular;
- with different geometric shapes;
- you can make the lower part of the fence convex;
- it is possible to use one design for several windows that are located nearby.
During the manufacture of such gratings, the metal is heated to a very high temperature, bent, compressed, pulled, and thus various artistic elements are obtained:
- smoothly curved lines;
- various curled curves;
- leaves and flowers;
- geometric elements;
- vignettes.
Watch the whole process in the video:
It all depends on your imagination, so the pattern can be very complex, with a variety of decor, or, on the contrary, too light and simple, but tasteful. Forged structures are hardened during the product process and are therefore very strong and reliable, thus they will serve you for a long time.
Photos
Forged fences will be perfectly combined with canopies, fences, gates and other various metal products prepared using the same forging method.
We wrote how to install the visor here.
Forged gratings combine all the advantages; the only disadvantage is the rather high cost of these products, which will not be affordable for many people who want to install exclusive gratings for their balconies.
Return to content
Grill installation
Before installing a metal product, it is necessary to assess the quality condition of the balcony slab and its metal frame. Entrust this question to a specialist, since any defects in the form of cracks or broken fragments already indicate the unsuitability of the structure and the need for its restoration.
Balcony grilles and fences
The grille for the balcony is made after individual measurements and, depending on the size of the structure, the method of its installation is selected.
On unglazed balconies, the product can be fixed in such a way that it does not protrude beyond the balcony slab, but is attached to the load-bearing part.
The most commonly used fastening method is to move the grille beyond the railings, about 10 cm above the ceiling of the loggia and 50 cm below the top level of the railings. Holes are made around the entire perimeter into which brackets are inserted, and the finished grille is welded to them. If the loggia has large dimensions, then it is allowed to manufacture the product in sections and connect them already during installation using electric welding; sometimes it is allowed to cut the front part of the lattice, and then, using the same welding, the product is “stitched” in such a way that the joints impossible to notice with the naked eye.
For installation it is better to use the services of professionals
When making the grille, you must also remember about window drains, due to the presence of which, the grille in the ceiling and lower parts must be made slightly convex. There should be a rubber gasket in places where the metal structure comes into contact with the balcony. You should also pay attention to the fact that the more holes are made around the perimeter of the loggia or balcony, the stronger the product will be fixed.
If you can be said to be a jack of all trades and have an equally unique assistant, then go ahead and feel free to install the grill yourself. The procedure will take several days, and the result may be completely unexpected. The easiest way is to entrust the job to professionals, even if you pay more, but once, and the quality of the work performed will please you for many years.
Please note: Glazing technology for a balcony with a roof
Balconies located on the first floors must be protected with bars, since thieves and robbers enter apartments through them.
Types and features of balcony grilles
From a functional point of view, fences for balcony openings can be:
- swing. Such grilles can be opened and are equipped from the inside with a mortise or padlock that is burglar-resistant. Recommended for those who want to leave access to the exit through the balcony in case of an emergency, such as smoke or fire.
- deaf. These grilles do not open. They cost less than hinged ones, are made within a couple of days and installed in half a day.
- removable. They can be easily dismantled, but the level of protection is lower. It is recommended to install only above the 2nd floor.
Advantages of installing grilles on the balcony
Forged grilles for the balcony
One of the main advantages of installing balcony grilles is your own safety. Such a structure cannot be bent, torn down, or dismantled without the use of special equipment, and this, in turn, will attract the attention of every resident of this house and passers-by. So these grilles are simply irreplaceable if your apartment is on the ground floor. In addition, if small children live in the apartment, then such grilles will protect them from accidental falls - in this case, it is advisable to install such a structure on any floor.
At the same time, one should take into account the fact that stationary grilles may contradict fire safety rules and become an obstacle in the case when, apart from the balcony, there are no exits from the apartment.
Secondly, any grille can be given a unique design thanks to skillfully forged decorative elements. Master blacksmiths easily create amazing weaves of metal rods that create plant and flower compositions. Such an elegant fence will not create the illusion of prison bars, but, on the contrary, will delight the apartment residents with its beauty.
In addition, you can choose the type of grille that suits your balcony in terms of functionality. That is, if you do not plan to make any living space out of the balcony, then ordinary stationary grilles will suit you, which will reliably protect the apartment from intrusion. If your goal is to create the most comfortable and functional space from your balcony, then in this case you can choose sliding or removable types of balcony grilles.
Stationary grilles
What materials are balcony grilles made of?
When choosing grilles for a balcony, you need to understand what and how they are made. The strength of the finished product and its price directly depend on the material. For example, the lattice could be:
- Steel.
Steel is one of the strongest and hardest metals, which does not have high ductility and toughness. Therefore, steel gratings are not particularly artistic.
- Iron.
Iron is a very ductile and easy-to-work metal. But, due to its properties, it is used for the manufacture of products from alloys (cast iron, steel). Iron gratings do not have high strength, but are affordable.
- Cast iron.
This alloy is highly durable, but cannot be forged. That is why cast iron gratings are made exclusively by the casting method.
- Copper.
Copper is a very ductile metal, which means it is easy to process and forge. At the same time, products made from it are practically resistant to corrosion and are environmentally friendly and completely safe for human health.
- Brass.
Brass is an alloy of copper and zinc, and the more of the latter metal it contains, the cheaper brass is. But at the same time, the corrosion properties are much better than those of copper, and the strength is not inferior to other metal alloys.
A grill made of any of these metals will perform high-quality protective functions, but when choosing a material, you must also take into account its durability. In this regard, it is worth paying attention to various coatings that will protect the structure from the influence of external factors (humidity, temperature changes, etc.).
All about balcony bars
The use of modern new technologies, materials and design developments currently make it possible to produce balcony grilles made of various materials, different types and shapes with different purposes and application features.
The main factor in installing a balcony grille is safety for residents living outside the fenced area. Basically, grating designs have a rigid metal structure made of various alloys of ferrous and non-ferrous metals.
They must perform the following functions:
- must be reliable and perform a protective function;
- It is better to use materials that are less susceptible to corrosion;
- possibility of long-term use during operation;
- should be easy to install and accessible to maintain;
- ensure fire safety;
- must be resistant to environmental influences and precipitation;
- perform decorative functions, improve the facade and the building.
Based on the listed data, gratings can be standard or custom ordered. Basically, welded metal structures are carried out according to certain standard projects, but there can also be individual orders.
Structures made from forged metal elements also have standard shapes. But mainly due to the difference in geometric dimensions, they often come in individual shapes.
In terms of execution, the balcony sheathing is mainly manufactured as a single whole metal structure. But for the safety of residents and in the absence of backup escape routes, it is better to design the grilles either removable or opening.
Also read on our website: Blinds for balcony windows
Types of gratings depending on manufacturing technology
According to the manufacturing method, there are three different types of balcony grilles. Of course, the price of different products may vary significantly. But in this case it is better not to save, because your life and the lives of your loved ones cannot be measured by any money. So, depending on the manufacturing technology, the gratings can be of the following types.
Welded gratings
Welded gratings
These gratings are distinguished by the fact that all the elements in them are firmly welded to each other, and then the entire structure is welded to the wall of the house or attached to it using anchor bolts. Reliability increases due to the thickness of the steel rods and other elements - the thicker they are, the stronger the product. Despite the fact that this type is much cheaper than forged gratings, welded ones are not inferior to them in beauty, because craftsmen can give the rods any curved shape and even cross-section (it can be not only round, but also square or hexagonal), and with proper work, places welding will be practically unnoticeable.
Forged gratings
Forged gratings
Forged metal products are always much more reliable than their welded counterparts, because hardened metal is many times stronger than regular metal. In addition, forged grilles amaze with their elegance and aesthetic appearance. But making this type of grating will take more time and money. But, in addition to the beautiful design of your balcony, you will receive a truly reliable grille, which will also show the high status and good taste of the owner.
Cast gratings
Cast gratings
This type is made of cast iron using pre-made molds. Molten metal is simply poured into these molds, and after solidification and final processing, a strong, solid structure is obtained. At the same time, you can order the production of a mold according to your own sketches, or purchase a ready-made cast grate.
Types of fastening of balcony railings
Based on the method of fastening, balcony railings can be divided into several types:
- Stationary
- Removable
- Swing
- Sliding
Stationary fastening means that the metal structure is welded directly to the facade of the building and is very firmly fixed, so this fastening is the most reliable.
Removable grilles are a reliable way of protection, because removing them will require a lot of effort. They are attached very tightly, but if there is a need to remove them, then it is possible to dismantle them.
Hinged and sliding bars are installed mainly on the top floors as decoration for balconies; they can be easily opened, like a window, but they are not a very reliable method for protecting an apartment.
Return to content
Types of grilles by function
Depending on the mounting method and various additional functions, the following types of balcony grilles can be distinguished:
- Stationary
They are firmly attached to the wall of a building or balcony and cannot be removed from it. To dismantle such a grill, you will have to call specialists or use a set of metal cutting tools. In addition, installing such gratings is a violation of fire safety rules, and if your balcony catches the eye of inspectors, you will most likely have to pay a fine and get rid of the grating. - Swing
This option is completely legal, since it provides for the possibility of opening the grille flaps in the event of an emergency. Many people think that it is pointless to install swing doors, and that burglars can easily break into the apartment precisely because of this design feature. But this is not so: the doors are firmly closed with a lock installed in a metal pocket, which can only be opened from the inside (there are also options with a padlock). But it is better to store the key to this grill right on the balcony, in a place accessible to every family member. - Sliding
This option is just right for those who are afraid for the safety of casement grilles. The advantage of this design is that its sections can be easily moved thanks to special guides. In this case, you can choose a roller or carriage mechanism, as well as a screen. But the wear resistance of such structures is low, so the mechanisms often become locked over time, and not everyone can close the grille back without additional effort. - Removable
If you need to protect your children from dangerous games on window sills or near balcony windows, this option will be ideal. Such grilles are just as firmly attached to the balcony, but at the same time they can be easily dismantled when the need for them disappears.
Please note: Who should repair balconies in an apartment building
Naturally, the price of the grille will depend on the complexity of the mechanism. Therefore, you need to determine your needs as accurately as possible, and also discuss this issue with all family members living in the apartment so that the chosen option is convenient for everyone.
Sketches of metal gratings
There is quite a wide variety of designs for balcony grilles on the Internet. Such a wide range allows you to choose grates according to your taste. Below are options for sketches of grilles.
Click on the picture to enlarge.
Return to contentTechnology for installing balcony grilles
When installing any type of grille on a balcony, you must follow several basic rules. Thanks to their compliance, the grille will serve as reliable protection for your property:
- In the case of an open balcony or loggia, the grilles are mounted with a distance of 10-20 centimeters, beyond the balcony railings. They are attached at the same time using welded brackets. In addition, the brackets can be lowered below the level of the railing by a distance of up to 10 centimeters, due to which the grille will be installed as if overlapping the fence. This will not only increase the protective functions of the grille, but also visually increase the space of the balcony.
- Another way to increase the free space of the balcony and give it a more impressive look is to install a volumetric grille. The grate, curved at the bottom, will allow you to place, for example, flower pots or other decorative items in this niche.
- The upper part of the balcony grille should be located 10-15 centimeters above the ceiling level. Thus, the structure should be attached in the place where the border with the neighbor’s (upper) balcony is located. This arrangement allows you to install an overhead drain on the balcony without any problems.
It is best to entrust the installation of such structures to a specialist, since he can easily establish a strong connection between all elements of the lattice and securely fasten it in the right places.
But, if there is no opportunity to contact specially trained people, you can install the grille on the balcony yourself. Naturally, you will not be able to perform such work on high floors, so the instructions are intended for owners of apartments on the first and second floors. First of all, you will need to prepare a set of tools, and do not forget to find an assistant. It will be very difficult to cope with this task alone.
What you will need to install the grille on the balcony:
- Electric drill;
- An ordinary screwdriver;
- Screwdriver;
- Fastening elements (screws, anchors);
- Construction foam.
In addition, you will need a stepladder that is tall enough to reach the top balcony slab.
The installation procedure will be as follows:
- Holes are drilled along the perimeter of the grate (or each section of it) with a drill. Moreover, the more holes you drill, the stronger the structure will ultimately hold;
- In those places where the grille will be in direct contact with the balcony, it is necessary to lay a special rubber seal;
- Then you need to carefully mark the places on the compactor, concrete foundations or walls of the building so that these marks exactly coincide with the holes drilled in the grating;
- According to the marks, holes are drilled, then anchors are inserted into them;
- Next, the grille is attached to the resulting holes with screws.
In the event that the balcony grille is not a solid structure, each section is attached to the balcony with brackets, and then all the elements are firmly welded together.
The installation of balcony grilles can be completed in one day. The main thing is the ability to work with the above tools, attentiveness and strict adherence to instructions.
Interesting video on making forged gratings:
Examples of ready-made proposals
For a better understanding of the formation of the price of grilles for balconies, I suggest you familiarize yourself with some ready-made samples:
- Forged swing model, convex at the bottom and decorated with small curly fragments:
| Parameter | Description |
| Frame material | Profile pipe with a cross section of 20 by 20 mm |
| Pattern material | Solid steel rod and square with a section of 12 by 12 mm |
| Cost per square meter | 3600 rubles |
Sample of the described swing model
- Forged solid model with a complex floral pattern in the middle:
| Parameter | Description |
| Frame material | Profile pipe with a cross section of 25 by 25 mm |
| Pattern material | Solid steel rod and square with a section of 14 by 14 mm |
| Cost per square meter | 6500 rubles |
Sample of the described deaf model
Balcony grilles: a reliable method of protection against uninvited guests
Very often, residents want to prevent the appearance of uninvited guests, so many install grilles on their balconies. Modern installation of grilles on a balcony or loggia is a current solution for the safety of intruders entering an apartment or house. Many people are confused by the feeling of enclosed space. Today there are many types of installation of protective structures that carry not only a functional load, but are also an important decorative element. There are many different types of gratings, the choice of which determines the type of installation. You can entrust the installation of grilles to the balcony to specialists, or you can do it yourself if you follow the instructions of professionals.
Loggia grille: types and type of installation
The grilles on the loggia are practically no different from the grilles installed on the windows. The only difference is the type of grating installation. It depends on the type of gratings that will be selected for installation.
Types of gratings according to manufacturing method:
- Welded gratings. Such structures are made of steel rods. They are welded together. When welding gratings, modern welding equipment is used, which leaves no visible connections between the metal rods. This type of welding allows you to create compositions of varying complexity from metal rods. This process is called artistic metal welding. Its advantage is its speed of execution, which does not affect its quality.
- Forged gratings. They are made using a special technology in which the metal first heats up, becomes soft, and then the rods are given the desired shape. This allows you to create exclusive decorative designs. Forged metal is famous for its moisture resistance. During the heating process, the metal acquires special strength.
Please note: Glazing of a balcony in Khrushchev: tips and recommendations
A wide variety of grille shapes and sizes allows you to choose exactly what you like
These types of grilles have their pros and cons, but are not inferior to each other in quality and performance of protective functions.
Advantages and disadvantages of welded and forged gratings:
- Welded gratings. This type of grating has proven itself on the positive side. The manufacturing process is not labor-intensive, fast and inexpensive. The gratings are lightweight but remain durable. If necessary, welding can be used immediately during installation.
- Forged gratings. The manufacturing process of this type of grating takes a lot of time, while the metal acquires strength and resistance to corrosion. By choosing a forged lattice, you can be sure of creating a one-of-a-kind design that will give your balcony an exclusive look. Manufacturing forged gratings is expensive.
Forged balcony gratings are slightly more expensive than welded ones.
All this is due to the fact that the process of their manufacture is much longer and more difficult. When choosing gratings for loggias and balconies, it is important to navigate modern types of manufacturing structures, focusing more on your own taste and the expected amount of costs.
Installation of grilles on a balcony (video)
How to install grilles on a balcony
Usually, the installation of grilles on balconies is carried out by specialists. Who were engaged in their manufacture. There are many ways to install gratings, which depend on the type of structure chosen.
To install the gratings, use the following tools and components:
- Anchors;
- Screws;
- Construction foam;
- Electric drill;
- Screwdriver.
Installing window bars can be done in just one day, provided it is done by a professional or with an assistant.
The main advantage of welded gratings is that they can be adjusted during installation
Installation of metal structures usually begins with drilling holes around the entire perimeter of the gratings. The basic rule of high-quality fastening is that the more holes, the stronger the structure will hold. Then, in the place where the gratings will come into contact with the balcony, a rubber seal is laid. After this, holes are drilled in the sealant, concrete and metal balcony railings. All holes should eventually line up with each other. Anchors are inserted into them, after which the structure is attached with screws.
If the balcony or loggia is large, the metal structure is not made in one piece. In this case, I make the gratings in sections, which are separately installed on brackets and guides, and after that they are welded together.
Installing the gratings will not take much time if you prepare the necessary tools, structures and balcony for the installation process in advance.
Which grilles are easy to use?
There are several techniques that will help you install gratings, while making them convenient for daily use.
As a rule, when choosing the type of grille for a balcony, one is guided by its functional, decorative and practical features.
Convenient installation methods :
- Removing the gratings. Grilles should be made with offset. The gratings are placed 10-20 cm beyond the railings and secured to welded brackets. A good option is to lower the fence below the railing by 5-7 cm. This can be done by welding the supporting brackets at the desired height. These simple procedures will visually increase the space of the balcony.
- It is best to make the fence voluminous. The structure should be bent from the bottom to the outside. Together with the removal and fastening of the grates in this way, the design will allow you to install an effective drain. There will also be enough space on the balcony for planting flowers and caring for them.
- The upper part of the structure must be placed beyond the railing , and also be placed 10-15 cm above the ceiling level. The structure is attached to the top slab, which is the border with the neighbor’s balcony. This offset will allow you to install an upper drain.
These techniques can be used for all types of grille installations, allowing for efficient use of balcony space.
Types of fencing:
- Stationary;
- Swing;
- Sliding.
The types of fencing should be selected depending on the expected functional and decorative features, and the safety of the installation.
How to protect an open balcony from burglars
An open balcony is protected from burglars by installing various types of grilles. This question is most relevant for residents of the lower floors.
If you live on the ground floor, then installing a grille on your balcony is simply a necessity, for your own safety.
When installing bars, it is important to take into account that when installing such a security system, you can limit your movement in unforeseen situations, for example, in case of fire. Therefore, it is best to use fixed-sliding grilles.
For the safety of the balcony, you can install roller shutters. It is made of perforated steel and is a fairly reliable means of protection.
Grill on the balcony (video)
In the modern world, bars on a balcony or loggia are a necessary method for protecting your home from intruders. Today there are many companies and private craftsmen who provide services for the manufacture and installation of gratings. The structure is made of different types: welded and metal. The type of installation also depends on this. Each has advantages and disadvantages, but all perform protective functions at the highest level. It is better to entrust the installation of metal structures to specialists. But if you wish, you can perform the installation yourself, if you strictly follow the instructions.
Metal fencing
When selecting fencing for a balcony, clients very often adhere to two rules:
- so that this fence provides protection and reliability;
- so that it looks beautiful and aesthetically pleasing.
For the manufacture of balcony railings, various materials are used, which must meet criteria such as: quality, reliability and resistance to environmental influences. Metal fencing is very popular. Compared to wooden fences, metal is stronger and more durable, and it is also not affected by environmental factors.
Due to their strength, metal fences can support any weight of a person if he leans on the fence.
Return to content
