Standard glazing of balconies and loggias in houses P-44 and P-44T

Hi all! Continuing the topic of glazing balconies in standard houses, I want to talk about glazing balconies in houses of the P-44 series.

The standard series of houses P-44 at the time of development was fundamentally new and had no prototypes. Today, this is the most common type of residential building in Moscow and the Moscow region, which in turn has spawned other series of similar houses with minor modifications and improvements.

The main feature of the P44 series houses is the complex geometry of the balconies - Boot and Boat (Iron). Along the perimeter of the floor, one resembles a boot (area 3.8 - 4.1 sq.m.), and the second a boat or iron (area 2.3 - 2.5 sq.m.).

In our company you can order warm or cold glazing of the balcony in the house P-44 on a turnkey basis. Send your application to [email protected] and we will make you a commercial offer. Or call the phone number listed at the top of the site or on the contacts page. We work throughout Moscow and the immediate Moscow region.

Glazing of balconies P-44 without restrictions

The P44 series is good because balconies allow you to make any kind of glazing: cold and warm, plastic and aluminum, with or without extension. The frames can be ordinary - hinged, or you can make them sliding. You decide for yourself which frames will be solid and which will open.

The smallest flap, the “toe of the boot,” can be made opaque by covering it with a white sandwich panel. This option allows you to glaze the balcony cheaper; it is often used when installing a floor-to-ceiling cabinet in this corner. We recommend warm glazing with plastic windows if you plan to additionally insulate the loggia and use it as a living room.

Note! The most problematic place is the joint between the balconies, where the main wall does not reach the parapet. It can be sealed in two ways: foam block or sheet metal.

Source: okna-alma.ru/otdelka-balkonov-p-44/

Glazing of balconies of the P44 series: “Boot” type

Due to the tortuous design of the “boot” balcony glazing options, there are about 10. Let’s look at the most basic ones:

glazing with a blind small section - on the largest edge there is a frame consisting of three parts, of which only one can be opened - the central one. Cost – about 33,000 rubles;
glazing with extension and built-in wardrobe - in this case, the longest edge is glazed with a frame with two sliding doors, which are quite wide - each 1.2 m. The two smaller edges are closed tightly, without glass, and a cabinet for household needs is installed in this place . The window sill is made remote and securely secured with metal brackets. Cost – about 20,000 rubles;
glazing with a large projection - this option can also be implemented. Only for a very wide remote window sill (more than 20 cm), you need to weld and secure a solid metal structure from the corners, securing it to the parapet. Cost – about 60,000 rubles;
glazing with a large number of sashes is not a very economical option, but some customers prefer this. In this case, the 240 cm edge is glazed with a 4-leaf frame, of which the middle two are opening. The 90 cm edge is glazed with a 2-leaf sliding frame, and the 40 cm edge is blind. Cost – about 25,000 rubles.

Other glazing methods are also possible - it all depends on the wishes and capabilities of the customer. And representatives of construction companies will help you decide on the most suitable option for you.

Types of glazing for loggia P-44

The most common types of glazing for loggias and balconies P-44 are plastic and aluminum systems. A plastic profile is used for warm glazing of P-44 loggias, and aluminum sliding windows are installed for cold glazing. The use of a high-quality profile allows you to create systems whose service life exceeds 30 years.

Warm plastic glazing

PVC windows for balconies of houses of the P-44 series are one of the most popular types of glazing. They are made from multi-chamber plastic profiles and double-glazed windows, including energy-efficient ones. This type of glazing, combined with high-quality insulation of walls and floors, allows the loggia room to be used as a full-fledged room even in winter.

How to glaze a P-44 balcony using energy-efficient double-glazed windows

P-44 balconies often become part of the room during the process of remodeling the apartment. In this case, it is necessary to take care of maximum thermal insulation of the light-transmitting structure. The optimal solution would be to install energy-saving or multifunctional double-glazed windows.

The silver layer and filling the chambers with inert gas provide a higher thermal conductivity coefficient and reflect heat into the room. For residents of apartments facing streets with heavy traffic, sound-absorbing double-glazed windows will be the optimal solution. They will provide the maximum level of comfort in the apartment.

Sliding glazing Slidors

Sliding plastic glazing Sliders is gaining popularity due to its convenient opening method, which saves space when opening. The profile itself is three-chamber and has steel reinforcement, which means windows made from it will work reliably for a long time. In such structures, you can install both a regular single window and a double-glazed window with a width of 18mm, which will significantly improve heat conservation.

Cold aluminum glazing

Glazing with aluminum windows is the most economical way to glaze a balcony. For these purposes, Provedal aluminum profile and single glass are used. Such windows can be hinged or sliding. The last option is more popular because... allows you to save space when opening.

More on the topic Aluminum glazing of balconies

Frameless glazing

Fans of modern interior styles should pay attention to frameless glazing. Installation of these systems will provide a panoramic view and a stylish exterior of the loggia. Maximum light will enter the room, because... There are no vertical imposts at all. The tightness of this design is ensured by an inter-glass seal.

Source: rehaupartner.ru/osteklenie-balkonov-i-lodzhij-p-44.html

Characteristics of balconies and loggias of houses of the p 44 series

Such residential buildings have balconies and loggias. This is a great advantage of such buildings. The loggia usually has a large area - about 4.5 sq.m., and the balcony is 3 sq.m. m. Thanks to these sizes, residents acquire an additional area of 7 sq. m. m., so they have a natural desire to improve these premises to the maximum. To do this, they can be glazed, or better yet, insulated, which will allow you to fully enjoy these additional rooms.

The peculiarity of the balconies and loggias of the houses of the p 44 series is that they have a bizarre shape due to bends and additional walls. Loggias in such houses have two configurations, which are conventionally called:

“Boot” - it is characterized by a protruding nose.
“Boat” - it has a protruding corner that resembles the shape of a boat.

These features must be taken into account during glazing work because they create additional difficulties. But all difficulties can be overcome.

The parapet may vary from house to house. It is made from the following materials:

Concrete.
Steel.
Concrete and steel.
Concrete, steel and brick.

Due to the large weight of the plastic profile used for warm glazing, they often resort to reconstructing the parapet so that it can withstand such a load.

Balcony P-44 “Boat”: glazing and finishing

The glazing of the “Boat” balcony is different in that the installation of double-glazed windows is carried out not in one, but in two planes.
Due to this geometry, glazing with sliding sashes will be preferable if there is a need for active (that is, not blind) sashes on both sides. If you plan to regularly use this area throughout the year, we can offer you warm glazing for the “Boat” balcony.

To insulate the “Boat” balcony in house P-44 (P-44T), specialized work is carried out, namely:

a frame is assembled for the sheathing on the inside of the slab and insulation is laid;
insulation is carried out on all sides, including the narrow one under the built-in furniture.

The balcony cabinet P-44 “Boat” is usually built into the corner of the larger sash, where there is a support beam. In this case, part of this sash is blocked. Thus, when glazing the Boat balcony, you can save money by not glazing the area for the shelving.

To increase the working area, our customers prefer to glaze the “Boat” balcony with an extension. At the same time, the geometry of the room is preserved.

The interior decoration of the “Boat” balcony is carried out according to generally accepted standards:

insulation;
leveling and covering the room on all sides.

The cost of glazing a “Boat” balcony directly depends on the method (cold, warm), the number of hinged sashes and the condition of the parapet slab.

How much does it cost to glaze a balcony p44

As already mentioned, glazing and insulating balconies p44 and p44t is a difficult task that is almost impossible to do on your own. Therefore, the optimal solution would be to turn to a team of professionals. At the same time, the question arises of repairing the balcony p44.

Of course, it is impossible to say the exact amount of all work in advance - this is calculated on an individual basis. The final cost depends on many factors, so it can only be calculated locally for each specific project. Please note that it is better to seek such services from those who have already worked with this type of balconies and loggias and have an understanding of all the possible difficulties in repairing and finishing a p44t balcony. This means it can glaze the balcony well.

Glazing dimensions for Boat p44t

The glazing of the Boat consists of 2 parts. On the left and right, to close the cracks, as a rule, flashings are installed. Less often, an additional small part is placed in the area of the L-shaped support. Then the design consists of 3 parts.

The total glazing area is 4.91 m2. If you plan to build a structure of 3 parts, then its area will increase by 0.35 m2.

How to correctly use the dimensions of the p-44t balcony

Residential buildings of the p-44t series are equipped with improved devices. The apartments are equipped with bay windows, and in the corner apartments you can also find half-bay windows. The cost of glazing loggias in such houses depends on the labor intensity of the work process and the variety of bay window angles. After all, to glaze a semicircular balcony, you need profiles made of flexible materials and curved glass.

Based on the size of the loggia, the purpose of the balcony area, financial resources and imagination of the owner, the p-44t series loggia can be turned into:

Personal office, where a desk or computer will be located;
Relaxation area with a soft sofa and ottomans;
A green area with your favorite indoor plants and an aquarium;
A sports area with a wall bars and exercise equipment;
Home library and other ideas.

Glazing a curved balcony is more expensive, since the process of installing windows is quite labor-intensive

A wardrobe for a balcony or play area is a great option for saving space. In order for the additionally created area to be bright and illuminated, it is necessary to order panoramic glazing.

With the help of balconies of large or small sizes, you can increase the area of the adjoining room.

Additional meters of loggia (usually from 3 to 5) will perfectly expand the living space, and modern design will give the room originality and freedom. This decision is made along with high-quality insulation of the balcony in the house and the installation of plastic profiles. It is important to seek advice and services from professionals who know all the intricacies of installation and have been carrying out insulation for many years.