How to whiten a plastic window sill from yellowness

Every housewife strives for perfect cleanliness in her home. Windows cannot be ignored either. The most important dirt on window sills is dust from the street and traces of pots. You can spend a lot of time cleaning stubborn stains, especially bleaching yellow stains, to give your window sill a beautiful look.

Whitening products

There are many known products that can whiten yellowed plastic. The result appears both after using traditional methods and after special industrial substances. But before you start cleaning, you should first remove visible dust and dirt from the surface of the products.

Solving the problem using folk methods

Among the most effective means at hand are:

Alcohol. Regardless of what factors the material has lost its whiteness, it will help cope with the problem thanks to its properties. For cleaning, it is recommended to use a microfiber cloth pre-soaked in alcohol. Since this is a fairly strong product, you should first clean a small area of the plastic surface. If no damage is found, you can safely bleach all yellowed plastic.
Laundry soap. The safest and most gentle remedy for yellow spots caused by dirt, but not fading. It contains mainly natural components; its use will never lead to damage or swelling of the material. The product will help to carefully clean plastic windows and window sills from yellowing.

To prepare a soap solution, rub half a bar of soap on a fine grater and add warm water to it. The surface must be wiped with the product in several passes, and then rinsed thoroughly. It is best to use a lint-free cloth.

To care for plastic, you should use only soft materials, sponges and microfiber cloths to prevent damage to the surface.

Powder and soda ash. Dissolve 1 tbsp in a liter of water. l. soda and powder. To remove yellowness, you can treat window sills or yellowed areas on the refrigerator with the solution and leave for a couple of hours, then rinse thoroughly. Instead of baking soda with powder, you can use regular baking soda. To prepare the bleaching solution you will need 1 tbsp. l. products for 500 ml of water.
Vinegar essence (70-80%). A gentle cleaning agent, however, its evaporation will require some precautions. During the procedure, you must work only with rubber gloves. After treating the surface, rinse off the product with clean water.
Hydrogen peroxide. It will help not only remove grease and carbon deposits from plastic, but also an unpleasant yellow coating. It is enough to moisten a sponge in it and carefully wipe the surface several times, which will return the whiteness to household items and room decoration.
Acetone. This is an alternative to alcohol, but even more aggressive. In an inconspicuous area, you should check whether its use will cause any harm and do not rub it too hard into the surface. Then moisten a sponge or cloth in acetone and treat the plastic, without leaving excess moisture on it and preventing the appearance of streaks.

Regular wet cleaning will help maintain the whiteness of plastic for a long time, because the main causes of contamination are greasy deposits and dust, which are gradually absorbed into the material.

Industrial

Wipes with cleansing impregnation. Designed for the care of computer equipment. They will help to carefully bleach the plastic and rid it of yellowness. With regular use, the plastic parts of the monitor, system unit and keyboard will become almost like new.
Sprays are cleaners. Not only do they clean, but they can also cover the plastic with a protective film, which will protect it from contamination. The consumption of the product is not high, one bottle lasts for a long time.
Dishwashing gel. To whiten yellowed plastic, it is recommended to wash the products with the selected kitchen detergent and then thoroughly rinse off the surface. The method is effective only against a weak yellow coating.

Method 6. Making a PVC paste to clean the window sill

The name sounds mysterious, but in fact the mixture consists of only two components - toothpaste and chalk. Due to its abrasive properties, this composition cleans stains well, while at the same time brightening the window sill.

Time-tested method.

Mix the ingredients in equal proportions and do not forget to crush the chalk well: large grains easily leave scratches.

Apply the mixture with a damp soft sponge, lightly rubbing into the window sill. After all the dirt has been removed, rinse the surface with clean water and wipe dry. Repeat if necessary.

Advice from the author : The paste should be the most ordinary, plain. Otherwise, you may get a completely unpredictable effect.

Prevention of yellowness

Plastic is a popular type of material, present in many appliances and household items. But for all its versatility, it has a main drawback - yellowness, which manifests itself over time and due to a number of factors:

direct exposure to ultraviolet rays;
sudden changes in temperature;
the presence of undesirable substances in the detergent.

Not all causes can be eliminated. But in order for the material to remain white for as long as possible, it should be properly cared for. For regular wet cleaning, it should be washed with a simple soap solution, and then thoroughly wiped dry.

If you use aggressive agents, they can lead to the formation of microcracks; over time, dust and dirt will clog into these cracks. It will be very difficult to wash such a damaged surface and return it to its original appearance. It is also extremely undesirable to smoke in rooms where there is white plastic; cigarette smoke turns it yellow faster.

If the material cannot be removed from yellowness, there is no need to rush to throw it away. In this case, you can use a special spray paint that paints the plastic white and gives it a second life.

What to do if you still can’t wash the window sill?

If the listed options do not help, including metal jaws - their use is acceptable when there is nothing to lose, you can pay attention to alternative options for making the window sill look decent:

Painting . Paint the surface immediately after cleaning. Acrylic one-component compositions are used.
Self-adhesive film . Before gluing, be sure to degrease the surface, for example, with a soap solution. Afterwards, wipe dry, leave for 15 minutes, and begin manipulation.

With proper care and regular cleaning, the plastic window sill will remain white for a long time. The ideal option is timely cleaning of any stains, so as not to waste time and money on restoring the white color.

How to bleach yellowed plastic - 10 ways

Plastic has long become one of the most popular materials for the manufacture of various things. It is found in toys, electronics, home appliances, cars and home decor. But over time, any white plastic products begin to acquire yellow tints. The reason for this is exposure to sunlight, sudden changes in temperature, improper care and natural reactions with oxygen. In such situations, you can try to bleach the yellowed plastic to restore it to its former beauty.

Acetone

In this case, the most dangerous drug for your plastic is one that can dissolve some types of plastics. To avoid this kind of damage, soak a cotton pad in acetone and make a few strokes on a small area in an inconspicuous place with a quick movement; if everything works out, then with active movements from top to bottom, wipe the yellowed areas, and then rinse thoroughly with water. Just remember to ventilate and wear thick rubber gloves!

Features of window whitening

The windows deserve special attention. Plastic structures used in conjunction with glass very often turn yellow under the influence of ultraviolet radiation emitted by the sun. Bright rays can illuminate them all day. If this happens regularly over several years, then the appearance of a yellow tint is inevitable. Additional factors include sudden temperature changes and improper operation.

Related article: How to make a workplace out of a window sill

The plastic used for window elements contains various substances that can extend its service life. Therefore, you should clean the window sill with care. You cannot use:

Dishwashing detergents;
Hard sponges;
Abrasive powders;
Acetone and similar products;
Alkaline substances;
Hot water.

All other means of getting rid of yellow spots can be used without fear.

Perhydrol (30% aqueous hydrogen peroxide solution)

This drug can be bought at any pharmacy, but when working with it, take special precautions - avoid contact with eyes and wear thick rubber gloves. If this is a ready-made solution, then simply moisten a soft sponge and wipe the yellowed areas several times, then rinse thoroughly with water (be careful, perhydrol tends to get very hot!). If this is a tablet form (hydroperide), then dilute it as indicated in the instructions and do the same.

If you are not pleased with the result, then add 2 tbsp to 1 liter of water. spoons of perhydrol 30% and how much bleach or stain remover (make sure that the perhydrol does not heat up during operation!). With all precautions, thoroughly treat heavily soiled or yellowed surfaces. Then wipe everything with a sponge soaked in clean water, and then dry. This method has proven itself to be the best for cleaning the inside surface of a microwave oven.

How to bleach plastic

It is not so difficult to return plastic products to their original appearance. This can be done at home without outside help. You just need to stock up on all the necessary means that will be used to achieve the goal. There are several cleaning methods.

Useful video on bleaching plastic - video:

Laundry soap

A simple but very effective remedy. Laundry soap will help renew old plastic, giving it a white tint again. This method shows maximum effectiveness when color changes are caused by exposure to fatty deposits.

Grate laundry soap (½ bar).
Pour warm water (150 ml) and stir.
Apply the prepared solution to the problem area. Wait 30 minutes.
Wipe with a clean sponge, wash away soap marks with clean water.

You can use this method in any case, because soap is harmless.

Special napkins

Electronics stores sell special wipes. They contain various substances that can clean computer equipment of dirt without any harm. They also help with yellowing.

Every 6 hours, wipe the yellow mark with a napkin.
Repeat daily for several days until the yellowness disappears completely.

This option is ideal for household appliances and plastic window sills.

Tooth powder with chalk

This unusual mixture allows you to return the white color to things if shades of yellow have appeared recently. You can try it for old stains, but you are unlikely to achieve significant results.

What do we have to do:

Mix a small amount of chalk and tooth powder.
Add water to make a thick paste.
Spread over the entire surface of the plastic and wait until dry.
Remove any remaining powder with a dry cloth.

The procedure can be repeated many times.

Soda and washing powder

Baking soda is very often used to clean dirty stains from various things. It also copes well with yellowness.

How to use it:

Mix soda (1 tbsp), washing powder (1 tbsp) and water (500 ml).
Apply liquid to plastic object. Wait 8 hours.
Wash off all traces with a damp cloth.

An excellent option for cleaning window sills.

Vinegar

An equally effective way to restore the whiteness of plastic products is acetic acid. To do this you will need a 70% solution.

Soak a soft cloth or large cotton pad in vinegar.
Wipe down the plastic.
Wash the surface of the object with water.

When using acid, wear rubber gloves and ventilate the area. It is also not recommended to use the yellow remover on sensitive plastic.

Citric acid with chlorine

A powerful yellowing agent that can be used on thin plastic products without worrying about their integrity.

Mix equal amounts of citric acid and chlorine.
Apply to stains. Wait 30 minutes.
Remove any remaining product.

This mixture can be used repeatedly until you can return the yellowed plastic to its usual appearance.

Hydrogen peroxide

This medical product is very popular and is present in every first aid kit. It helps not only to disinfect wounds, but also to tidy up the surface of yellowed plastic.

Wet a soft sponge with peroxide.
Rub yellow stains repeatedly.
Wash off any remaining traces of peroxide.

The product does not harm plastic. Therefore, long-term and repeated use is allowed until the desired result is obtained.

Alcohol

Alcohol has become very popular in cleaning stains. It destroys the composition of any dirt, making things clean again. It helps to whiten heavily yellowed plastic no less effectively. Its composition not only removes yellowness, but literally destroys the structure of the upper layers of the object. Therefore, it should be used with caution.

How to use alcohol:

Soak a rag in it.
Wipe the yellow parts of the surface.
Remove all traces of alcohol with clean water.

This method is suitable for rough, dense plastic on household appliances and various devices.

Acetone

Another very aggressive solvent that can not only lighten the plastic, but also damage it. Before use, it is recommended to apply a small amount of acetone to an inconspicuous area of the item to check the reaction. If everything is in order, then it can be used. Nevertheless, caution will still not be superfluous.

Soak a thick cotton pad with acetone.
Wipe down the plastic.
Wipe off any traces of product with a damp cloth.

Instead of acetone, you can use nail polish remover. Its composition is not so harmful to the coating, but shows less effectiveness.

Special products for plastic restoration

You can return white plastic objects to their original appearance using special products that are designed to restore plastic in cars. You can buy them at auto repair shops and spare parts stores.

Apply to the problem area following the instructions.
Wait until dry.

Before use, be sure to read the instructions.

Bleach

Option for small items. It involves completely soaking the item in chlorine.

How to do it:

Dilute bleach or bleach (1 tbsp) in water (1 l), adding a little soda (1 tbsp).
Place the item to be restored into a container with liquid. Leave overnight.
Remove and rinse the item thoroughly under cool water.

If the yellowing is very strong, soaking in pure bleach without diluting it with water is allowed.

Various alcohols

Due to the fact that plastic does not react chemically with alcohol solutions (methanol, ethanol, isopropanol, etc.), they can be safely used to whiten yellowed stains. But to be sure of a successful outcome, it is better to check the reaction of a particular plastic surface to such a radical substance. To do this, walk (with rubber gloves!) over the most inconspicuous area with a cotton pad soaked in alcohol; if everything goes well, then you can safely wipe all the yellowed areas. There is no need to rinse off alcohol solutions, but the room must be ventilated.

Causes of yellowing of plastic

There are many reasons why plastic turns yellow, the most important of which are:

prolonged exposure to direct sunlight;
use for cleaning household products containing large amounts of chemicals;
natural aging of the material;
impregnation with fat or soot;
effects of nicatine;
sudden changes in temperature conditions.

You can restore the neat appearance of yellowed plastic using household or folk remedies. But this is not an easy, lengthy procedure, and the desired effect is not always achieved.

Methods for bleaching plastic using traditional methods

Among folk products, the best solution to this problem is laundry soap, alcohol, washing powder in combination with soda or hydrogen peroxide. The choice of product depends on the type of contamination and how long ago the stain appeared.

Laundry soap

The yellow spot becomes visible immediately after its appearance. Fresh dirt can be easily removed using laundry soap. To prepare a folk remedy you need:

Divide into two equal parts. Pass one half through a grater.
Divide the resulting shavings into 200 ml of warm running water.
Stir the contents vigorously until a homogeneous soap solution is formed.

The consistency should be generously soaked in the sponge and spread over the problem area and left for 30-45 minutes. As soon as the component is absorbed into the plastic, you need to carefully remove it with a sponge, then wipe with a damp cloth.

Alcohol

A common reason for the formation of a yellowish coating on plastic window frames or window sills is prolonged exposure to the sun's rays. Ethyl alcohol will help cope with this problem. To carry out the treatment, soak a piece of fabric in it and apply it to the problem area, if necessary, rub it lightly. After 20-30 minutes, wipe the treated area with a damp cloth.

It is worth considering that this method of removing yellowness is not suitable for every type of plastic. Poor quality material will begin to crack or become cloudy when exposed to alcohol. It is first recommended to apply a few drops of alcohol to an inconspicuous area and wash off after 20-30 minutes. The reaction of the material should be observed for 1-2 hours.

Washing powder combined with soda

Household appliances or windows are susceptible to the formation of grease and soot if they are located in the kitchen. Such dirt appears on the outer part of the window frame when the apartment is located on the 1st floor or near the road. An effective method to eliminate this problem is to use washing powder in combination with soda. To prepare this product you need:

Mix 1 tbsp. a spoonful of powder with the same amount of soda. Mix the ingredients.
Dilute the components in 500 ml of warm running water. Mix the components thoroughly until a homogeneous solution is formed.

It is necessary to moisten the sponge generously in the powder-soda solution, then wipe the problem area and leave to soak for at least 6 hours. After this time has expired, it is necessary to wash off the composition with a damp cloth or rag.

Hydrogen peroxide

If plaque appears as a result of aging of the material or after using a low-quality household product, then it is difficult to bleach it. This can be done only after 3-6 treatments, but even then the stain may not completely disappear. It is recommended to use a ready-made pharmaceutical solution of hydrogen peroxide for this purpose.

It should be poured undiluted onto a napkin or sponge, then transferred to the damaged area and left to soak for 1-2 hours. But, you cannot use technical hydrogen peroxide with a high concentration in undiluted form, it will lead to corrosion of the plastic, and it will be impossible to restore it in the future.

Chlorine bleaches or stain removers

Such products must be used very carefully and carefully (remember personal protective equipment and try to avoid inhaling vapors). Naturally, we do not take pure bleach or white, but chlorine-containing bleaches or stain removers at the rate of 1 tablespoon per 1 liter of water. Soak the plastic elements in this solution for 10-12 hours, then rinse thoroughly and do not forget to wipe.

Care and prevention

You can prevent the appearance of yellowness on a plastic surface by observing the following measures:

do not smoke indoors or near windows;
Prevent exposure to direct sunlight by using curtains, blinds or kitchen cloths;
use for processing only those products that are suitable for cleaning plastic;
ventilate the room more often;
Clean the surface from dirt immediately after it appears.

Several times a week, it is recommended to wipe household appliances or window sills with a sponge soaked in a mild soap solution to maintain a neat and tidy appearance.

Purchasing a product made of high-quality material and observing regular care and basic preventive measures for plastic contamination is the key to preventing the formation of yellowness. If plaque does appear, it should be immediately eliminated using folk or ready-made household remedies.

Why does plastic turn yellow?

The appearance of yellowness on the surface of plastic can be caused by several factors that occur due to environmental influences or improper use.

Burns out in the sun

Exposure to ultraviolet rays has a detrimental effect on some plastic components. As a result, they are destroyed, which leads to a change in color.

Temperature changes

A sharp change in ambient temperature does not negatively affect the color and quality of plastic products. The fact is that such an impact causes the appearance of microcracks on the surface, which leads to the disintegration of the outer layer and volatilization of the dye included in the composition.

Unsuitable cleaning products

If you use inappropriate products to clean the material, it will quickly deteriorate. For example, plastic does not at all tolerate the effects of aggressive substances based on acids or alkalis. With each use, the structure of the plastic is disrupted and it loses its declared properties.

Dust, grease and soot

Similar problems appear on products located in the kitchen or if the apartment windows overlook the road or factory. Fortunately, this problem can be easily solved with cleaning.

Poor quality material

Unfortunately, when producing plastic, not all manufacturers adhere to the correct manufacturing technology or use incorrectly processed raw materials. If low-quality components were used to create the product, this may also cause yellowing.

Whitening yellowed plastic: effective life hacks

The housing of household appliances, work surfaces and modern windows are made of high-tech plastic, which may lose its original color over time. You can bleach yellowed plastic at home using folk recipes or special products. With a little time and effort, you can return to its former whiteness.

Hydrogen peroxide (3%) and hair lightening agent (6-9%)

If everything is not completely neglected, then hydrogen peroxide itself will be enough, with which we wipe all yellowed areas with a cotton pad or sponge (depending on the area). One procedure cannot be done here; such manipulations must be carried out from 3 to 5. If the result still does not suit you, then add 2 tbsp to 1 liter of water. spoons of hydrogen peroxide and hair lightener, thoroughly wipe the surface with a moistened sponge (with gloves!) and its whiteness will again delight you as before. If you want to know for what other purposes this cheap drug can be effectively used, take a look at the Novate.Ru page, you will be surprised at a lot.

Effective ways to remove yellow discoloration

Many housewives are faced with the problem of yellowed plastic. You need to understand the reason for the loss of color. This may be exposure to sunlight, which especially affects plastic window sills. Sudden temperature changes and tobacco smoke turn the color of kitchen appliances yellow. The use of low-quality raw materials in production provokes early darkening of technical plastics. Proper, timely care is important, in the absence of which the product will cease to be white.

Home Remedies

Among the substances that can be found on the farm, there are several effective ones:

Baking soda. You need to prepare a cleaning solution by mixing 100 grams of soda with 100 ml of warm water. Using a soft sponge, apply it to the darkened area and leave for several hours. After the solution is cleaned off, the area is washed with clean water and wiped with a dry cloth. This method is suitable for washing small parts that can be soaked for a long time. A diluted soda solution can be used to clean yellowed dentures.
To remove yellowness, 70% vinegar essence is suitable. Before handling, you should wear rubber gloves for protection. Moisten a soft cloth with vinegar, wipe the yellow areas, rinse with water and dry.
Hydrogen peroxide. Regular peroxide can help with the onset of yellow spots. For spot treatment, you can use cotton pads, which need to be moistened and wiped over the stain in several stages.
The soap solution must first be prepared by grating laundry soap in the form of fine shavings and adding warm water. Wipe thoroughly with a rich foam with a soft sponge, rinse with water and dry.
Dishwashing liquid. The advantage of the products is that they can be used without harm to plastic products.
Washing powder. A quality optical brightener powder will help combat the loss of white color on a variety of plastic surfaces. You need to prepare a homogeneous substance from the powder with water, apply, wait a while, and rinse thoroughly with water until completely lightened.
Alcohol. You will need protective equipment, including a face mask, to prevent inhalation of ethanol fumes. Due to the chemical composition of alcohol, you need to check an inconspicuous area of the product for damage. If the plastic holds up, you can wipe the entire yellowed surface with a moistened cotton pad. Then clean with a damp cloth.
Nail polish remover. The acetone in the product can wash off the paint on the plastic; you must first check the reaction to the substance. Then you need to moisten a cotton pad and spot-clean the surface of yellow marks, trying not to leave streaks.

Related article: Do-it-yourself window sill heating

Specialty chemistry

Specialized household chemicals can quickly and efficiently wash yellowed plastic:

Wet wipes for plastic. A less time-consuming way to bleach plastic on household appliances, from a mixer to a computer. It is worth wiping the darkened areas daily until the desired effect appears.
Chlorine bleach. The use of chlorine in cleaning is a universal method for cleanliness and disinfection. You can whiten problem areas by applying a cleaning solution for a while, rinsing with water, and wiping dry. Old stains can be bleached by soaking the body panels in bleach overnight. The yellow deposits in the toilet and bathtub will disappear after several uses of this product.
Professional spray bleach. Suitable for all plastic surfaces. It is often used to carefully whiten an old plastic window sill, removes yellowness, and forms a transparent film on the outside that protects against the negative effects of the environment. Easy to use, used by housewives to wash the plastic parts of the chandelier, without removing it from the ceiling.
Dye. A radical way to get rid of yellow spots forever. White spray paint is 100% effective, allowing you to return it to its original appearance.

Professional household chemicals for removing various contaminants are presented in a wide range in the departments of household goods; you just need to choose the right one and use it according to the instructions.

Step-by-step cleansing scheme

First of all, it is necessary to remove large construction debris. It is advisable to remove the plugs if they are not attached with glue. Sweep away the dust with a dry cloth. It's better to use an old knitted T-shirt; it's soft and won't scratch the plastic.
After removing the main contamination, you should walk over the surface with a wet cloth to moisten and control the removal of dust residues. Now you can apply the cleaning agent and leave it for 20 minutes.
After the time has passed, it is necessary to wash off the reagent with warm water, rinsing the cloth several times.
The cleaning procedure should be completed by wiping the surface dry with a soft cloth with good absorbent properties.

To preserve the appearance of a PVC window sill, before starting repairs, you need to cover it with polyethylene or paper, try not to step on it, do not use metal scrapers and hard brushes for cleaning, and do not use aggressive compounds or strong solvents.

The article has been verified by the editors

Features of removing yellowness

It is worth washing off the yellowness of the surface after careful preparation - when working with aggressive substances, it is necessary to protect the skin of the hands, face, and eyes. It is worth choosing an effective cleaning product and familiarizing yourself with the rules for cleaning various items.

Windows and sill

Double-glazed windows, window sills, and balcony doors are exposed to the sun, whose ultraviolet radiation causes color fading. High-quality plastic loses its snowy whiteness over time. It can be returned by selecting an effective cleaning component. The main rule is to first remove cement residues. It is necessary to use soft rags and sponges so as not to damage the surface during bleaching; dirt gets clogged into microcracks, which is difficult to get rid of.

Technique

The refrigerator and microwave in the kitchen are the leaders in the level of contamination; they need to be cleaned once a week. Before processing, you must turn off the devices from the power supply and do not place them under running water, otherwise a fire may occur.

Dishes

Plastic dishes and containers for the refrigerator are convenient for daily use, but the yellow coating forces you to purchase new kitchen utensils. This can be avoided if you clean your dishes in a timely manner using natural cleaners. The use of special bleaches is strictly prohibited; dangerous components can enter the gastrointestinal tract along with food, causing severe poisoning.

Plastic suitcases and mobile phone cases have become an integral part of our lives. Although they do not require daily care, they can also turn yellow over time. Their bleaching is no different from other plastic coatings; improvised substances or household chemicals will do an excellent job of removing yellowness.

Method 7: Mixture of vinegar and baking soda to remove old stains

If you need to remove an old, stubborn greasy stain, you can do without special detergents. Start by applying a thin layer of baking soda to the dirt using a damp sponge.

A mixture of baking soda and vinegar for the toughest stains.

Then add a little vinegar to the powder. Wait for the chemical reaction to complete. Carefully remove the mixture along with any loose dirt. Repeat if necessary.

Advice from the author: The mixture is quite aggressive, so try not to use it unless absolutely necessary.

How to care for plastic to avoid yellowing

You can protect the material from premature aging if you follow several rules:

install an air conditioner in the kitchen to control the temperature;
install a strong hood to eliminate splashes of fat during cooking;
install high-quality double-glazed windows from a trusted company;
to protect against fading in the sun, hang blinds or thick curtains on the window, and bright napkins on the windowsill;
completely stop smoking for the sake of your own health and cleanliness in the house;
carry out timely cleaning of dirt, weekly general cleaning;
the choice of bleach depends on the degree of yellowing of the plastic;
before processing, you need to test the reaction of the material so as not to permanently spoil the item;
use microfiber cloths and soft sponges to avoid damaging the surface;
wipe household appliances with technical wipes with special impregnation to form a protective film.

Bleaching plastic is a feasible task, the main thing is to approach the matter responsibly and prepare thoroughly. Then plastic products and appliances will shine with their original whiteness, just like the kitchen and toilet itself. There is no need to get rid of what appears at first glance to be a damaged item or spend the family budget on another purchase.

Types of stains on windowsills

First of all, you need to figure out what stains may appear on a plastic window sill . By knowing what to watch out for, you are more likely to prevent them from occurring.

Different stains can be washed off using different methods.

Do you have flowers growing on your window? You will likely have to spend a lot of time dealing with the yellow spots that inevitably appear after watering if the pots are not airtight.
Have you recently replaced a window? You will have to deal with drops of primer, pieces of polyurethane foam and other traces of installation work.
After the winter period, stains from glue and adhesive tape will probably appear.
Sintepon crumbs can stick to fat, and it will be very difficult to wash such a formation.
Dirt coming from the windows can leave marks on the surface of the window sill.
Do you often place pots and plates on the windowsill? There will probably be greasy stains , which are not so easy to remove.
Even on plastic, traces of rust can accumulate , which “crawl” there from metal elements.

In addition, if the kitchen is small, many housewives use the window sill as an additional work space. This also negatively affects its cleanliness, and it is almost impossible to predict what stains will appear there.

Now let’s take a closer look at how to deal with each type of window sill contamination.