The process of cleaning windows is only tedious if it is done incorrectly.
If you approach this issue wisely, choose the appropriate product and equipment, and strictly follow the instructions, then the glass will always remain clean, and the procedure itself will not take much time.
Read the article about how to properly wash windows in an apartment and on a balcony so that they don’t get dirty longer, how to remove old paint from glass and traces of foil.
How to wash properly without special equipment?
You need to start cleaning windows when the weather is right . It is advisable to choose a cloudy and windless day, since direct sunlight on the glass will cause the product to dry quickly, and they also make it difficult to objectively assess the degree of cleanliness of the washed window.
If the weather is suitable, the task can be completed without special equipment. All you need is a rag, a bowl of warm soapy water and old newspapers.
Clean and streak-free inside the apartment
Instructions for cleaning windows from the inside:
You need to remove all objects that are on it from the windowsill. Blinds and mosquito nets are removed and washed separately.- Add a little liquid soap to warm water. Soak a sponge in the solution and wash the frames.
- Then they begin to wash the glass. Stubborn stains are removed using special means.
- Wipe the inside surface of the windows with clean water, rinsing the cloth 2-3 times.
- Several newspapers are crumpled and polished on the glass. The paper will absorb excess water and will not leave streaks.
High quality and safe from the outside, from the street
Washing windows from the outside without special equipment can be dangerous if the apartment is on a high floor.
The following instructions will help you cope with the task without risking your life:
- the opening sash must be washed according to the same principle as the windows inside;
- To wash the cast half of the window, you will need insurance, since you will have to reach out - you can use a special carabiner designed for climbers, or ask for help from household members, because You cannot bend far beyond the window without insurance;
- first you need to wipe the outer frames, as a lot of dust accumulates on them, then you should walk along the slope with a rag;
- The glass is washed with soapy water, removing all dirt, then rinsed with clean water and wiped with a dry cloth.
When carrying out work, do not lean against glass or an open sash; this is unsafe.
Preparatory work
Washing windows in an apartment begins with preparatory work. Their list and order may surprise many housewives, but everything was gained through practice. So:
- open the curtains, but it’s better to take them off and wash them. Cleaning, so cleaning;
- raise or remove blinds, if installed;
- empty the window sill - move flower pots and decorative items to another place;
- if there is a table next to the window sill, it needs to be moved aside to make it possible to place a stool. A strong table from which you can wash the window should be covered with oilcloth or plastic film;
- Place a dry cloth or film on the floor to prevent dirty drips from the window from staining the floor covering. It is necessary to protect laminate flooring especially carefully - it is afraid of moisture;
- Wipe the glass unit with a dry cloth from the inside and outside. You can use a vacuum cleaner or a wet cloth soaked in warm water. But in the latter case, you need to wipe the window dry to continue cleaning. This operation will remove dust, and with it dirty streaks (there will be some, but not in such quantities), which will allow you to get the job done faster;
- wash the window sill and frame. Many housewives do this part of the window care work last, believing that water with a cleaning solution will contaminate the plastic. This is partly true. But if there is dirt on the frame, it is much more difficult to polish the glass - stains remain in the corners and in the places where the glass adjoins the profile. And it’s easy to remove drips on clean plastic - just wipe with a dry cloth;
- Prepare tools and detergent for work.
Choosing a glass cleaner
You can wash the window using improvised means. They do not require financial costs and are easy to use. If you don’t want to study and prepare the compositions yourself, you can purchase them in the store. There is a wide range of window cleaning products available, and they are inexpensive.
Folk recipes
You can even wash windows with plain water, but this procedure is quite tedious. You can make the task easier with the help of folk remedies that are found in every home:
- Vinegar. To prepare the solution you will need 1 glass of water and 3 tablespoons of 9% vinegar.
- Lemon juice . It is taken in the amount of 4 tablespoons per glass of water.
- Ammonia . For 2 glasses of water you will need 2 tablespoons of ammonia.
- Vodka. It is diluted with water in a ratio of 1:3.
Any of the listed solutions is poured into a spray bottle, with which it is applied to the glass. You will find many folk recipes for washing windows here.
Special formulations
There are many window cleaning products available on the market. Based on the following criteria, you will be able to select the optimal composition:
- Liquids based on benzyl or isopropyl alcohol. They dissolve grease stains well, including old ones, and do not leave streaks behind.
- Liquids in which surfactants are the base component. They have high cleaning properties and are safe for windows and human health.
- Sprays with ammonia. They are chosen to combat stubborn stains, as well as to give the window surface a glossy shine.
The auxiliary components are: acids, silicones, antistatic agents, water-repellent substances. Popular brands of window cleaning products:
- Clin (140 rubles),
- Mr. Muscle (200 rubles),
- Unicum (110 rubles) and others.
The rating of the best window cleaning products is presented in this publication.
Professional products
Household chemicals require compliance with the instructions for use regarding dosage, method of application and keeping on the surface. Particular care is needed when cleaning tinted and decorative glass, as well as surfaces with solar reflective and colored coatings. It is better to test the detergent on an inconspicuous piece of glass.
Reference: the most popular cleaning products on the market are: Mister Muscle, Sanita, Clin, Cif, Help. The compositions of the listed products have been developed and tested under industrial conditions. Advantages: the effect is almost instant, the product is evenly distributed over the surface, and there are no streaks as a result.
How to choose a rag?
When choosing a rag for cleaning windows, you need to start from what material it is made of. Possible options:
- Faux suede . It collects water and dirt well and does not leave lint behind.
- Microfiber. A reusable rag that not only collects dirt, but also polishes glass perfectly.
- Viscose. Such rags are suitable for applying detergent, but collecting moisture with their help will be problematic.
Popular brands of rags for cleaning windows:
- Master fresh microfiber (80 rubles),
- Starwax microfiber (320 rubles),
- Bagi “Miracle Rag” napkin made of viscose (520 rubles), etc.
You will find tips on choosing cloths for cleaning windows in this article.
Common mistakes when cleaning windows
To ensure a high-quality wash, it is recommended to take into account common mistakes and avoid them.
It is very important to take into account weather conditions and the ability to work comfortably during work.
Among the main ones:
- Incorrect selection of funds. It is necessary to avoid aggressive compounds and abrasive particles, even if the contamination is strong. All rags and napkins used must be soft, and the chosen products must not leave a yellow residue;
- Selecting the wrong tools. Hard sponges can damage the surface, as well as other equipment that is potentially dangerous for the window structure. Any sharp objects, including knives, are not suitable for removing dried particles;
- Wrong choice of weather. It has already been noted when it is best to wash the window surface. The winter season is unsuitable for such a procedure. You should also avoid rainy weather. Strong wind or scorching sun are also not the best conditions for cleaning windows. The water will dry out too quickly and leave a residue;
- Window cleaning is not complete. It is necessary to wash every detail of the entire structure thoroughly. If you only wash the glass, it will be of little use. Against the background of a dirty structure, the cleanliness of the glass will not be too noticeable.
For wet cleaning, it is better to choose not very sunny, windless weather.
How to wash quickly, easily and effectively?
Any window can be washed quickly if you don’t waste time scrubbing away dirt and removing stains. To do this, you need to use detergents with a combined composition, which will include surfactants and alcohol.
It is most convenient to apply the liquid from a spray bottle . This also helps save time. Be sure to pay attention to the rag. It should collect water well and not leave streaks or lint behind.
Another way to quickly clean a window is to use a special device, such as a robotic glass cleaner. It is enough to plug it into the network and install it on the window, and after finishing the work, rinse the rag and put the device away for storage.
Read more in this article.
When is the best time to wash windows?
It is a little surprising that young housewives often do not know when to wash windows in spring and autumn. The answer lies on the surface: the optimal time for washing windows is cloudy, windless weather with above-zero temperatures . It is more difficult during summer cleaning. The sun, heat and breeze, even a small one, quickly dry the detergent both outside and inside the room. And these are stains that are difficult to remove. In addition, in bright light it is difficult to assess the quality of work - glare makes it impossible to see poorly washed and polished areas.
Difficulties with bars
If the window frames open into the living space, then cleaning windows with bars will not be difficult. The situation is more complicated with cast non-removable structures.
There are several options:
Use a steam cleaner.
Its nozzle is inserted into the existing opening and the device is connected to the network. Under the influence of steam, all dirt will dissolve, even without the use of detergents. However, if the opening is too narrow, then wiping the glass with a rag will not work.- Residents of the first floors (provided the windows are low) can use the Karcher mini-wash.
This device supplies water under high pressure. After using it, not only the glass, but also the grilles will be perfectly clean. If Karcher is not available, then a regular hose will do, but its efficiency is lower. - Call specialists. They have devices that can help you cope with any task. However, cleaning services will cost money.
The last and most labor-intensive option is removing window structures. Although it will not be possible to do without special knowledge and tools.
What tools are needed for cleaning
First, let's list the items that will be useful in your work:
- large container for water (basin or bucket);
- soft sponge;
- a microfiber cloth (or a soft cloth that does not leave threads on the glass);
- glass scraper (a manual “mop” with a sponge on the edge - makes it easier to clean up water stains, preventing the appearance of streaks);
- spray bottle (to make it easier to apply detergent).
When you need to wash the entire window, and not a small fragment, you will still need a lot of water. To achieve perfect glass cleanliness, you cannot save water.
Assistant devices
To make the process of washing windows easier, you can use special devices, of which there are many today. They not only save time, but also help you get to hard-to-reach places if you can’t reach them.
Such devices are indispensable for residents of high-rise buildings, as well as for owners of glazed balconies and loggias:
- Telescopic mop . It has a retractable handle that allows you to reach corners at great heights.
- Magnetic brush . The device is represented by 2 halves, which are attracted to each other by magnets. A person washes only the inside, and the brush located opposite him repeats his movements on the outside of the window.
- Rubber scraper with a short handle (water scraper). With its help, it is easy to remove foam and dirty water from glass after basic cleaning.
- Steam Mop . Powered by electricity, dirt is removed under the influence of a jet of steam. The device can be used for various household needs, for example, for washing tiles.
- Vacuum cleaners for windows . The devices operate on batteries or are powered from the mains. The principle of operation of the device is simple: using a built-in spray bottle, detergent is applied to the glass, then it is wiped with a special nozzle. The completion of cleaning is the suction of liquid into the reservoir. As a result, the entire process takes a few minutes.
- Robot vacuum cleaners for washing windows. These miniature assistants are divided into vacuum and magnetic. The devices operate independently, with virtually no human intervention.
The more complex a device is from a technological point of view, the more expensive it is. You can find out how to wash windows with a Karcher steam cleaner here, how to use a window washer - here, how to use a telescopic mop - here, a magnetic brush - here, robotic vacuum cleaners - in this article, washing vacuum cleaners for windows - in this one.
Private questions
The material reviewed did not include some specific issues that concern site visitors.
How to wash if there are grates
At first glance, it seems that bars create serious problems when caring for windows. But that's not true. The reason is simple - they are usually installed on the first two floors of the house. Therefore, a stepladder will help when cleaning glass on the first floor, and magnetic brushes or a telescopic mop on the second. The washing technology is no different from the standard procedure.
It’s even easier if there are swing bars. In this case, there are no problems at all.
How to clean on high floors
Cleaning windows from the outside on a high floor is really problematic if one sash opens into the apartment and the other is blind. Here, the first place is not the quality of washing, but safety. After all, the risk of falling from a height and breaking is very high.
To solve the problem you can:
- hire a cleaning company;
- use magnetic brushes (how to use them here);
- buy a window cleaning robot (a way out of the situation, but not the best solution);
- use a mop with a special handle.
The above tips are good, but they do not allow you to remove dirt in the corners and near the profile. Therefore, the vast majority of housewives take a risk and stand on the windowsill, holding the frame with one hand and cleaning the glass with the other. The editors of the site categorically do not recommend climbing out of the window opening. But if the desire exceeds the arguments of reason, we advise you to become attached to the battery. The rope or cable must support the weight of a person with a large margin. You need to fasten it around your waist and crosswise over your shoulders so as not to accidentally slip out of the belay.
How to clean sliding windows
Sliding windows are cleaned from the inside and outside in the same way as hinged windows. Moreover, in most cases they can be removed from the guides, which simplifies the cleaning process as much as possible.
How to wash windows on the balcony
Difficulties in cleaning balcony windows arise when there is side glazing and there is no opening sash. In this case, it will not be possible to get to the outside of the glass from the balcony. But the existing sash does not always solve the problem. After all, the side window is still difficult to access. You can try washing with magnetic brushes. Only here you need to try, firstly, to deliver the tool to the place of work, and secondly, not to break the glass when the magnets collapse. After all, strict control over the halves of the device is extremely difficult to ensure.
Industrial climbers will help resolve the issue.
It’s a little simpler with a loggia - there is no side glazing. A mop with a telescopic handle will help out here. You can use magnetic brushes, but the problem arises when moving from one double-glazed window to another. The brush cannot penetrate the profile holding the glass.
How to prevent divorces
It is not always possible to wash windows in an apartment without streaks. There are several reasons:
- the glass is poorly washed. There was dirt left on them that the detergent could not wash off the first time. In this case, the procedure must be repeated. If the problem is not resolved after repeated washing, change the cleaning solution. After all, there could be dirt on the glass that the used glass cleaner is not able to wash off;
- window care work is carried out in sunny or windy weather, as a result of which the water quickly evaporates, leaving a thin film of chemical elements on the glass;
- the washed glazing was wiped with a poorly wrung out or dirty rag;
- removal of the cleaning solution was carried out using pendulum or circular movements, but from bottom to top (not to be confused with washing - it’s the other way around);
- The water turned out to be hard, as a result of which a limescale deposit settled on the glass, which is difficult to remove with a rag.
Knowing the problem areas, you can give advice on preventing divorces.
- Wash plastic windows in cloudy, windless weather.
- Do not wash the entire window at once, but wash each glass unit separately. This will allow you to quickly carry out the work without allowing the cleaning solution to dry out.
- You need to wipe the glass dry with smooth circular movements, from top to bottom.
- At the final stage, polish the glass using newspapers, a suede cloth or nylon tights. These handy products can remove remaining stains without repeated washing with clean water.
- A solution of glycerin and water will help to consolidate the results of your work. It wipes the window glass, as a result of which it will not sweat.
In addition, stains can also appear from a dirty window block profile. Therefore, it is recommended to wash it first.
What are the nuances of washing windows after renovation?
Some difficulties arise if windows have to be washed after repair work. Experts advise covering the window opening in such cases with plastic film, but in practice workers do not always follow the recommendations of more experienced comrades. It happens that the owners, relying on their neatness, stain the double-glazed windows with building materials. There are no difficulties in removing stains if you know which product to use in each specific situation. Let's put them all in a table.
Table 1. Products for removing stains from building materials.
Type of pollution | Stain remover |
Polyurethane foam on a double-glazed window | "Solvent 646" |
Nitroenamel | Acetone |
Enamel | |
Adhesive from masking tape | Vegetable oil, turpentine, drying oil or isopropyl alcohol |
Cement | Orthophosphoric acid |
Acrylic paint | White alcohol, gasoline |
Chalk and lime whitewash | Cif for shiny surfaces |
When removing stains from building materials, there are two things to keep in mind.
- When working with solvents, good ventilation of the room must be ensured.
- Phosphoric acid instantly corrodes plastic. Therefore, all precautions must be taken to prevent acid from coming into contact with the PVC frame or window sill.
How to clean plastic and wooden window structures?
Plastic windows are not picky to care for , but in order for them to last longer, they need to be washed correctly:
to remove stains from glass, you can use gels based on alcohol, ammonia or surfactants; ordinary soapy water does the job well;- To care for double-glazed windows, you cannot use powders with abrasive particles and caustic acids;
- you need to pay attention not only to the glass, but also to other components;
- To make cleaning easier, you can use various devices, with the exception of hard brushes, which will lead to scratches.
Old-style wooden frames have many cracks and openings into which dust gets clogged. You can remove it with a toothpick or cotton swab. To care for glass, use non-aggressive solutions, for example, soap or vinegar water.
Do not wash wooden frames with soda, as it destroys the paint and can harm the structure.
You can find out how to wash plastic windows correctly here.
What is the best way to clean glass?
The described methods clean glass equally well from various contaminants. If you act carefully, these methods do not leave streaks and return the window to its original appearance - complete transparency.
Soapy water
A simple way to get rid of limescale (caused by washing with tap water) is a solution of laundry soap:
- Dissolve shavings of 72% soap in a bowl of cold water. Stir well - the soap particles stick to the glass, so they shouldn’t remain. Approximate proportions - 2 tbsp. l. soap with a slide for 5 liters of water.
- Clean water is collected in another basin.
- Using a sponge, wash the glass with soapy water. The movements are made from top to bottom - this way there are fewer stains.
- Rinse with water from the second basin.
- Wipe with microfiber or a regular cloth.
If there is a window scraper, then clean (after rinsing) water is driven off with vertical movements. If not, you can wipe the glass with a crumpled newspaper so that there are certainly no streaks left.
Alcohol
Alcohol helps remove any dirt from the glass (even traces of paint remaining after repairs). Suitable for both medical and technical. Apply it to a rag and wipe the contaminated areas. Leave it alone for 2-3 minutes, and then wash it off with water without additives. Small stains are rubbed with a cotton pad or swab.
40° vodka also gives the glass a shine. It is used against plaque and old stains. But it will cope much worse with a drop of acrylic paint or silicate glue on glass than strong alcohol.
Newsprint
A very old method of cleaning windows that still works with any type of glass:
- Rinse windows with water without detergent.
- Blot the main moisture with an open newspaper. You don’t have to do this, but then the next step will take more time.
- They wipe the glass dry with crumpled newspapers.
The secret of newspapers is that their thin paper does not leave characteristic stains, like a towel and rags. And the ink polishes the glass well. It is advisable to take black and white newspapers, because colored ink can leave marks when wet.
Store-bought cleaning products
The most obvious method of cleaning glass is using special detergents. They are highly effective and are sold in any industrial store. The following brands are deservedly popular:
- Amway (especially LOC and LOC Plus products);
- Larrin;
- Cillit Bang (Power Cleaner);
- Pro-Brite;
- "Niko" (washing SIL);
- "Lima";
- Cif;
- "Mister Muscle".
Using these preparations according to the instructions, you can easily remove water stains in shower stalls, any types of deposits on windows and most difficult stains.
Soda and vinegar
This famous combination copes well with dirt on glass:
- Add 100 ml of 9% vinegar and ¼ cup of baking soda to 2 liters of warm water. Stir until the soda is completely dissolved. The powder may scratch the glass.
- Soak a sponge or soft cloth in the solution.
- Wash the glass with vertical or horizontal movements. The main thing is not to make circles, or the soda will cause faint streaks.
- Wipe with paper napkins or towels.
In addition to plaque and stains, the mixture is effective against permanent marker. When there are little ones in the house who want to draw on the windows, this is very useful.
Lemon
Sour citrus is the closest substitute for vinegar in terms of the effect it has. Apply this way:
- Squeeze 50 ml of juice from the lemon.
- Mix the juice with a glass of water.
- Apply to glass using a spray bottle. You can also use a sponge, although it’s not as convenient.
- Wipe with a dry soft piece of cloth.
Another way is to cut a lemon in half, remove the seeds and rub the dirty area with half. Helps well against glue and paint stains and marker marks.
Another unusual way to use lemon is to prepare an “infusion”:
- They take the peels of several fruits and push them into a jar.
- Fill to the top with table vinegar.
- Close the jar and put away for 2 weeks.
- Then it is filtered and little by little added to the water intended for washing glass.
Lemon acid
Acid is used a little differently than lemon juice:
- Add 1 tbsp to a glass of water heated to approximately 50 °C. l. acids. Stir well so that there are no crystals left to scratch the glass.
- Pour into a spray bottle and spray on glass.
- Wash off the window with a damp sponge.
Ammonia
Ammonia is a powerful agent that removes lime and nicotine deposits well. The properties of ammonia are eloquently indicated by its presence in the composition of window cleaning preparations. It is used like this:
- Add ammonia to the water (at the rate of 1 tablespoon per 1 glass). Stir thoroughly. Intensifying the effect of ammonia, vinegar or formic alcohol (also 1 tbsp) is sometimes added to the mixture.
- Apply to dirty glass. It is most convenient to do this with a spray bottle, but a dish sponge will also work.
- Wipe with light pressure using the same soft sponge.
- Without rinsing, wipe the glass with microfiber or a simple cloth.
The disadvantage of alcohol is a strong unpleasant odor. Therefore, after cleaning, the windows are opened for ventilation.
Glycerol
Liquid glycerin copes with any type of plaque:
- Mix with cold water. Proportions - 50:50 or 60:40 (more glycerin). Sometimes 3-4 drops of ammonia are also added.
- Shake the mixture.
- Moisten a sponge or a piece of cotton wool - depending on the area being treated.
- Apply to glass and leave for 10-15 minutes. Then they wash it off.
This recipe is often used to prevent pollution. After washing, the solution is applied to dry glass from a spray bottle. The invisible layer repels dust, and in winter it serves as protection against frost and ice.
Salt
Salt copes with plaque worse than other methods. But it removes dirt, fingerprints and dried stains well:
- Throw 2 tbsp into a glass of water. l salt. Stir thoroughly so that no crystals remain.
- Wet a microfiber cloth. It is acceptable to use a sponge and a rag, but microfiber works best with a saline solution.
- Wash the glass with a napkin.
- Wipe with another microfiber or regular cloth.
How to wash the window sill, mesh, frame and other components?
It is necessary to regularly wash not only the glass, but the entire structure as a whole. Features of component care:
- You should start washing the frame first. If this is not done, the dirt in the corners will smear and stain the glass. Particular attention is paid to fastenings and drain holes. After washing, they must be dried.
- Rubber seals are washed with soapy water and allowed to dry. If this is not done, then over time the seal of the window will be compromised.
- The mesh is convenient to wash in the bathroom. First, it is wiped with a sponge soaked in soapy water, and then rinsed with a shower.
- You need to take care of your window sill regularly. Remove dust and minor dirt with a soft damp cloth. Complex stains are removed with an alcohol or vinegar solution.
- Slopes do not tolerate contact with aggressive substances and hard brushes.
This article will tell you how to wash the mesh; this article will tell you how to wash the window sill.
How to keep windows clean
It is not difficult to prolong the results of window cleaning if you use glycerin or, for example, corn flour. Both products will help create the thinnest coating on the glass - it is invisible to the naked eye, but at the same time prevents the surface from sticking dirt.
Recipe: 60 ml of glycerin mixed with 40 ml of water, add 5 drops of ammonia. The resulting composition is applied to clean and dry windows, left for 20-30 seconds, then wiped dry.
Corn flour acts in a similar way; it is taken in the amount of 1 tbsp. l. for every liter of water. The protective agent is prepared as follows: water - 1 liter, corn flour - 1 tbsp. l. This solution is used to wipe glass at the final stage of cleaning. When cornmeal gets on plastic elements, it does not damage them.
To keep windows clean, you don't have to wash them often. The main thing is to do it correctly and efficiently. What is the best way to wash windows and what solutions to use is a matter of taste: some people prefer commercial solutions, while others remain faithful to traditional - folk - methods of solving the problem.
Cleaning double-glazed windows on the balcony
To clean the windows on the balcony you will need a mop with a long handle. With its help you will be able to reach the upper corners.
If all the frames are sliding or open inward, washing them from the outside will not be difficult. Be sure to pay attention to their attachment points and guides . If dirt gets into them, it will cause problems with frame movement.
If necessary, double-glazed windows are removed. To do this, the plugs are dismantled, after which the structure is removed from the guides. This article will tell you more about how to wash windows on a balcony, loggia, how to wash panoramic windows - this one, sliding ones - this one.
What weather is best to wash windows?
When cleaning windows, be sure to wear protective gloves.
When thinking about the best way to wash windows, do not forget about the main thing - the weather, which is ideal for cleaning them.
The bright sun is unlikely to help, because the stains will not be visible, and the liquid on the surface will dry very quickly, making it impossible to wipe it off with a rag. And the rain is unlikely to be a help, because it will not allow you to wipe the glass dry. Therefore, it is best to do this business in cloudy weather, when there is no precipitation.
In addition, it is worth remembering some rules that will make cleaning safe and simple:
- be sure to wear protective gloves;
- if products containing ammonia are used, it is important to properly ventilate the room after cleaning;
- if the windows are high, use a mop with a long handle; it is much safer than a pyramid of chairs and stools.
To summarize, it is worth noting that washing window openings is not the easiest task, which requires a certain skill and experience. It is important to remember to put your own safety first. And the use of folk recipes will ensure the cleanliness of the glass and allow you to wash the windows without streaks.
Lifehacks for cleaning at a high level
Washing windows at height requires insurance. It is good if a second person performs this role. He should hold the washer by the body when he leans out.
You cannot stand on a stepladder or stool next to an open window. Loss of balance can lead to falling from a high floor.
For safer care of double-glazed windows, you can use special devices , for example, a telescopic mop or a robotic window cleaner. Read more about cleaning windows on high floors here.
Features of frame care
From this part we begin to wash the windows. For plastic frames, it is better to use a soap solution or industrial liquids in the form of sprays.
For wooden structures, you can add a little washing powder to the water , be sure to wait until the granules are completely dissolved. The internal parts must be treated with the selected solution; the perimeter of the structure is washed from top to bottom.
To remove the detergent completely, you need to thoroughly rinse the rag and, if necessary, replace the water with clean water.
How to remove different types of contaminants?
If the windows are dirty not only with dust, it is not always possible to deal with the stains with soapy water. Depending on the type of contamination, different means are used:
scratches are polished with GOI paste;- the film is removed using a steam generator;
- the resin can be washed with turpentine, alcohol or gasoline;
- remove paint with acetone;
- bird excrement is removed with toothpaste;
- the foil is soaked in water and carefully removed with a plastic or rubber scraper.
You can find out how to remove scratches on window glass here, and how to remove protective film here.
Household chemicals to help
Cleaning frosted glass from difficult stains is carried out with compounds from a professional line. Use industrial products and gloves. First, work on the dirt, after which the glass is washed completely.
How to clean:
- Ajax Super Effect perfectly cleans matte surfaces without leaving streaks. Allows you to achieve shine, a convenient applicator makes application easy. Apply the composition from a distance of 20 cm. There is no need to rinse with water. Wipe with a clean and soft cloth.
- Mr. Muscle is one of the best options for sandblasting stain removal. The product helps if the surface is slightly dirty. Mr. Muscle does not help with thick layers of dirt, greasy and oily stains.
- Ecover is an ecological super-cleaning spray. Cleaning frosted glass is not a problem for him. Ecover is biodegradable and does not harm the environment. Does not contain synthetic fragrances, suitable for heavily soiled surfaces. How to clean frosted glass on doors: apply to a dirty area, wait a minute, wipe with a sponge, rinse with water. This cleaner will keep your sandblaster sparkling like new.
When choosing cleaning products, you need to make sure that it is not its plastic counterpart. In appearance they are almost identical, in properties they are not.
It is recommended to wash glass with household chemicals once every 2 weeks. The rest of the time, clean with soapy water. The main difficulty is that sandblasting is difficult to wipe dry. They don't use newspapers. Only frequent changes of microfiber or suede cloth will help.
Robot vacuum cleaners
A device that can take on all the work of cleaning windows and carry out washing without human intervention is a robot vacuum cleaner. There are still few varieties of such devices on the modern technology market, but the existing models have already earned positive customer reviews. The brands WINBOT, Windoro, Hobot are especially popular.
With this device, washing windows at height turns from a dangerous routine job into a pleasant experience. Cleaning, like hand washing, consists of wet and dry cleaning, resulting in sparkling clean windows.
- WINBOT. It is suctioned to the glass using double suction rings. When the device is turned on, the built-in pump creates an internal vacuum. The robot moves thanks to the alternating suction of the double rings. Using the front microfiber cloth soaked in a cleaning solution, most dirt is removed. After this, scrapers are put into operation to remove remaining dirt and moisture. To complete the process, the back dry microfiber rubs the glass surface to a shine. The robot is controlled from a remote control. You can wash the window inside and outside the room, no matter how high the floor it is located, without getting up from the sofa.
- Windoro. This device attaches to the glass surface using a magnet and is battery powered. First, the robot determines the boundaries and dimensions of the space to be cleaned, moving along the perimeter, after which it begins cleaning, moving in zigzags.
- Hobot. All models of this manufacturer are distinguished by high functionality and reliability, silent operation and convenient control from the remote control. The device can operate both from the mains and from a separate battery, so the range is not limited.
Each of the listed devices is designed to clean windows inside and outside. The cost of such devices ranges from 15 to 25 thousand rubles. Your own safety and comfort are worth it.
Double-sided magnetic brush
A dual-sided brush with two jaws held in place by a magnet is a safer way to clean windows than a telescopic squeegee.
The design of this tool involves the use of two brushes at the same time - one to wash the window while inside the apartment, and the other to wash the window outside. The second moves synchronously with the first due to the action of a magnet mounted on a brush that is operated from the inside.
It’s also not always possible to master a magnetic brush the first time. You should feel the force of attraction of the magnet. If the attraction is not strong enough, you will not be able to clean the glass.