Replacing window glass in a wooden window is a very common reason for clients to contact our company. These are mainly one-story houses and dachas, since if anti-vandal bars are not installed there, then the risk of damage to the glass in the window increases significantly. Our craftsmen will quickly arrive and replace the glass in a wooden window, according to your application for this service.
The cost of the service itself is inexpensive and acceptable for our clients. The work is carried out only with high-quality materials and good tools, which we purchase only from specialized companies.
Replacing glass in wooden windows
Glass is the most vulnerable point in the design of any window. Leaving the frame open without fixing it, careless handling when closing and opening the window, throwing a foreign object at the window - all this inevitably leads to the glass in a wooden window cracking or breaking. In this case, its complete replacement is necessary.
Glass replacement is often required during routine window repairs. Scratches, chips, and cracks that may be on the glass affect not only the aesthetic appeal of the window, but also its heat-insulating qualities. Therefore, if any, even minor, damage is detected, the old glass urgently needs to be replaced with a new one. If the solution to this problem is postponed, then even an imperceptible crack can eventually turn into a real gap, which will lead to the complete destruction of the glass.
Measurement rules
Not all window glass for a wooden frame will be rectangular, so simply measuring the length and width may not be informative. Often, experts measure the frame on both sides; if there is a difference between the indicators, then a measurement is taken in the middle.
To measure glass, use a special meter or tape measure, since when measuring with a standard ruler, its length may not be enough and the results will be inaccurate.
What to measure:
- frame length;
- its width;
- diagonal.
The difference between the results obtained from the inside and outside is insignificant, most often it is 1% or 1 cm.
You shouldn’t pay attention to such indicators; you can simply cut out the desired piece of rectangular or square size and use it for its intended purpose. If the difference is more than 1 cm, then you need to take into account all the parameters and cut the sheet exactly according to the template.
It is best to cut the glass with a small gap smaller than the dimensions of the frame. This will allow you to quickly and securely insert it without creating drafts in the frame in the future.
Reasons for replacing glass in windows
The main reason for replacing glass in a wooden window is mechanical damage, for example, if it is broken, cracked, its structure is damaged, or chips, cracks and other damage appear on it. But there may be other reasons for replacing glass, which are aimed at improving the performance of the window.
Replacing glass in wooden windows can improve the following characteristics:
- increasing heat and sound insulation;
- improvement of functional content (tinted, anti-vandal, triplex);
- giving higher safety and mechanical strength;
- changing the window configuration;
- change in decorative characteristics.
Required materials and tools
The process of replacing glass in wooden windows does not require special knowledge or professional skills. Local conditions will be decisive when choosing equipment. The components also depend on the design features.
Basic tools and materials:
- glass, selected depending on the expected temperature and mechanical effects;
- when making it yourself - a tool for cutting glass (glass cutter), a limiter (table) where the glass profile will be cut;
- chisel (remove glazing bead);
- when repairing a supporting structure - hinges;
- hammer, screwdriver, hacksaw, pliers;
- In the work, a ruler (tape measure), cutters (cleaning the groove from old materials), markers (pencils, pens) for marking, a rebate and a zenzubel to eliminate the distortion of the frame quarters will not be superfluous.
How to cut off the desired fragment?
Don't be afraid to insert glass into the window yourself: this process is not very complicated. The only difficulty is cutting the glass to the required sizes. To do this, you can purchase an inexpensive glass cutter, but you will need to practice a little, otherwise there is a risk of damaging the glass that will be inserted. The best option is to purchase glass of the right size. This will save you from having to cut the material yourself and guarantees smooth edges. A glazier can help you cut out the required element.
Sequence of work when replacing glass in a window
- removing the sash from the window;
- removing fragments from the frame and glazing beads using a chisel;
- removing old putty with a chisel or spatula and small nails that used to hold the glass;
- cleaning the glass grooves from putty residues;
- cleaning, drying, repairing and priming folds;
- installation of new glass;
- securing glass with small nails or glazing beads;
- securing the glass with putty on the outside of the groove;
- removing excess putty from the frame.
Replacement of glass unit
The double-glazed window is the main, but most fragile and vulnerable part of the window. The glass may break, crack or be scratched. In addition, over time, for some reason, a double-glazed window may cease to perform its heat-protective functions. To eliminate such problems, as well as to improve the performance of the window, it is necessary to completely replace the damaged glass unit. Replacing a double-glazed window will help solve problems such as disruption of functions, heat and sound insulation, as well as fogging of the glass or its coating with a layer of ice.
When starting a replacement, you need to clearly understand what exactly your goal is. If the main goal is to insulate the room, then you need to choose a double-glazed window with energy-saving glass and a large number of cameras. If you want to increase the sound insulation of a room, you need to choose double-glazed windows with glass of different thicknesses.
Modern wooden windows have a complex structure, so replacing a double-glazed window yourself is quite problematic. In order for the new double-glazed window to be installed with high quality and to please you for a long time, it is better to contact experienced specialists who know all the features of the window design, have experience in similar work and have all the necessary equipment.
Why is it necessary?
Double-glazed windows sometimes require repairs. This can happen after deformation or depressurization due to improper installation, with regular violation of operating standards, or after mechanical damage, which is the most common cause. If a double-glazed window is damaged and the heat-shielding properties are lost, and condensation, plaque or ice forms inside it, then repair will not help, the only way out is to replace it.
Only an experienced technician should repair a damaged double-glazed window, since it is almost impossible to do such a complex job that requires special knowledge without the proper experience. Repairs require special knowledge of window design, as well as skills and experience in troubleshooting. A double-glazed window is a rather complex system, so if the mechanisms break down, the technician needs to know certain design features and be able to correctly select the parts that require replacement.
Our services
provides services for replacing glass in wooden windows in Moscow. If for any reason you need glass replacement, our company’s specialists will immediately provide you with professional assistance.
You can contact our company not only in case of glass damage, but also to improve energy-saving, strength or decorative characteristics. Remember that replacing glass in wooden windows is a complex process that requires accuracy, special skills and knowledge, so it is better not to take risks and entrust it to experienced specialists.
Peculiarities
Replacing glass in wooden windows is a simple process. It has a number of features and is carried out in three stages:
- dismantling old glass or its remains;
- cleaning the work area from contamination;
- glass installation, sealing.
When selecting glass, you should know some nuances.
- Services that specialize in glass cutting and work with large volumes of material accumulate a huge amount of waste. In such workshops you can always pick up a small canvas (for example, for a window) for a fraction of the cost.
- Glass is selected in accordance with the intended functionality. In areas with cold climates, the use of K-glass (minimizes infrared radiation) is a must, which blocks thermal radiation and helps save energy in winter, and also protects from the sun in summer. Tempered glass is indispensable when glazing areas with a high risk of accidents. When destroyed, it crumbles into small pieces that cannot cause significant damage.
- The thickness of the glass determines its fragility, durability and thermal conductivity. This parameter directly affects the light transmittance and the choice of equipment and cutting tools for processing.
- Replacing glass requires knowledge of GOST standards and approvals. It includes recommendations for the manufacture of wooden frames and their glazing.
The advantages of wooden frames for renovation work are obvious. Glazing a double block will not take much time if you have everything you need. During repairs, maximum attention should be paid to fitting the glass and its installation.
The main task is to prevent the presence of voids and cracks between the edges of the glass panel and the frame. This problem is solved using a special mastic, putty or silicone-based sealant. The composition is pre-applied to the frame.
The consumption volume of the composition depends on the size of the fold. As practice shows, a 500 gram jar of mastic (putty) fixes glass measuring 1x0.5 meters. If the color of the composition does not fit into the interior design, the frame can be painted.
Before applying the dye, the mastic should be dried.
The technical characteristics of the substance make it possible to compensate for possible slight deformations of glass under the influence of temperature. At the same time, the material acts as a sealant.
Prices for replacing glass on wooden windows in Moscow
| Service | Note | Price |
| Replacing damaged glass in wooden windows | A technician will arrive and replace the glass within one day. | 1500 - 3500 RUR/m2 |
| Replacing damaged glass in plastic windows | 3000 - 3500 RUR/m2 | |
| Replacing single-chamber double-glazed windows in plastic windows | 3000 RUR/m2 | |
| Replacing double-glazed windows in plastic windows | 3500 RUR/m2 | |
| Replacing tinted glass | +30% | |
| Replacement of triplex glass | 6000 RUR/m2 | |
| Replacement of energy-saving glass | +20% | |
| Tempered glass replacement | +30% |
Price list for window repairs in Moscow
Tips and tricks
- Domestic manufacturers, using modern technologies, supply products of the highest quality, which are cheaper than imported analogues.
- The weight and service life of wooden frames depends on the type of wood.
- The calculation of the cost of glazing is determined by the price of materials (wood, glass), the complexity of the design and the equipment used.
- Periodic maintenance (impregnation) significantly increases the service life of the glazing.
- The costs of high-quality materials for balcony glazing are compensated in the future.
- The wood for the construction of the balcony frame must be well prepared (dried and planed).
- Choose the glass thickness correctly (based on local features and financial capabilities).
- You should adhere to the assembly technology as closely as possible. If possible, you should consult a specialist.
- Preliminary calculations should include possible costs for special tools and consumables, as well as equipment for preventive measures.
It's no secret that window glass has a limited service life. They break, lose transparency and heat-conducting characteristics. The window loses its functionality. The way out of the situation is to replace the glass.
If we are talking about a simple wooden window, repair work will not cause much difficulty. Restoring and replacing glass in complex frame structures using double-glazed windows will require special knowledge, equipment or the help of a professional.
