How to install eyelets yourself on curtains, clothes, awnings, paper step by step

Over the past 10 years, industries in various areas have undergone great development. Consumer goods with various paraphernalia and accessories are flying off store shelves with a bang. Clothing, home textiles, country and tourist products - have such an element as eyelets. In order to find out what eyelets are, how to install these products yourself, what they are used for, when they originated, what they are, and many other questions, read this article.

The grommet is designed to strengthen the edges of holes used for threading braid, cords, ropes or cables

Where are eyelets used?

Eyelets are needed to make a smooth hole in any material and protect the cut edges from chafing . In 1901, the fittings were invented for fastening ship sails; over time, eyelets began to be used in sewing clothes, belts, curtains, as well as for assembling documents or other papers into ring folders.

Small eyelets are installed on almost all models of sports shoes, for example, sneakers. The laces are passed through the metal rings. Thanks to this fittings, the item will last longer, the cord will not fray, and the material from which the shoes are made will not deform.

Who invented the product?

Every person who wonders how to install grommets at home is interested in knowing where this product came from. There is no way to know for sure in what century the fortification was first used. But there is an industry of application: for sailing. The sails required strengthening of the edges so that the rigging of the entire vessel could be threaded through them.

Historically, the grommet came from sailing, where it is still used today as the main way to reinforce holes

Interesting. Rigging refers to all the elements of a ship that are used to control the sails.

The first rivets looked very simple. The edges of the sail, made of special fabric (cotton, etc.), were stitched with several ties of thick thread. The stitching methods were different: their choice largely depended on the required strength and durability of the structure. After the complete mastery of this technology, as well as at the dawn of the metallurgical industry, metal rings began to be used for rivets. The entire process of fastening them was reduced to manual installation, since at that time there was no specialized tool that would allow you to quickly and easily install a rivet. People made do with improvised means.

Various devices can be used to flare the edge of the grommet.

So why don't we learn from the experience of our ancestors? Next, a separate section of the article describes in detail how to install a grommet at home, without using a specialized tool.

Advantages and disadvantages of application

Why eyelets are considered a good invention:

• Curtains with eyelets glide well on a special round curtain. They open silently and easily. The same can be said about paper with eyelets. Such sheets are easy to turn over in a folder.
• Reliable fastening. If curtains on hooks can be accidentally touched and the loops broken, then the eyelets will withstand such a load.
• Aesthetic appearance. Thanks to the fittings, the holes look neat. You can choose eyelets by color, to match the tone of the product, and also choose an unusual shape.
• Clothes and curtains can be washed in a machine without removing the accessories.

The only drawback is that the material on which the eyelets will be installed must be chosen correctly. Many fabrics shrink after washing, as a result of which the hole is deformed, and threads or the edge of the cut material come out from under the fastening of the fittings.

What is it and what are they?

Eyelets are a special type of fastener for curtains. They border the edges of specially made holes, through which the cornice rod is then threaded.

Such products are made of plastic, metal or wood. It is worth noting that the first ones are the most practical:

• they do not oxidize or corrode;
• they can not be removed when washing the curtains;
• they slide easily along the bar with a pleasant rustling sound;
• with proper quality they are reliable and durable;
• You can simply attach them with your own hands.

The market offers models of eyelets of various sizes (the most popular are from 10 to 50 mm) and colors. Can choose:

• transparent - with or without a pattern;
• plain of any shade;
• for any natural material (marble, wood, metal, etc.);
• metal - chrome, bronze, gold plated, etc.;
• with rhinestones.

The eyelets also differ in shape:

• traditional round;
• oval;
• square;
• triangular;
• figured - in the form of flowers, fish, frogs, steering wheels.

Types and materials

Eyelets can be classified according to several criteria.

The table describes in detail the types of fittings and their characteristics:

It is important to select the size and color of not only curtains, but also cords or ribbons. For example, shoe fittings should either match the base material or be the same color as the laces.

Store-bought or homemade?

A wide variety of models of roller, Roman, pleated and other compactly assembled curtains on sale does not necessarily guarantee that among the entire offered range there will be a perfectly suitable product. The main characteristics of industrially produced options are:

• standardized sizes. The typical size range - length, width - is designed for the popular dimensions of metal-plastic and wooden windows;
• neutral colors. For the most part, ready-made curtains have calm, soft colors that are suitable for different interiors. Colored and printed products are more expensive;
• using non-woven or woven synthetic materials as a base fabric. Their advantages are resistance to ultraviolet radiation, ease of cleaning, durability, and strength. The main disadvantage is the synthetic nature;
• standard opening/closing mechanisms;
• standard finish or lack thereof.

For many users, all of the above features are advantages. But if you have a non-standard window size, a desire to create an individual design, or a desire for natural materials, it is better to try to order a suitable model or create roller blinds for plastic windows with your own hands.

How to choose a mounting option

You can install eyelets yourself only if they are plastic or wooden rings. These products are designed to be installed manually. The bushings are easy to unfasten and, conversely, snap into place. Metal fittings are attached using special tools.

The choice of the type of eyelets depends on the material on which they will be attached. For light and elastic fabrics, plastic rings are suitable. They can also be used to attach paper and laces to summer shoes.

Wooden fittings are installed on dense materials, for example, cardboard, leatherette, or curtains of medium thickness. Metal eyelets are used to make holes in rough and thick materials such as leather, jeans or canvas, as well as for thick blackout curtains.

Eyelets: history of appearance

The likely timing of the grommets' appearance remains unknown. It is known that this happened a very long time ago, perhaps during the times of Ancient Greece. Scientists do not know the language in which this word appeared, much less the inventor of this device. The appearance of the grommet is associated with the use of wind power, and the term itself refers to the hole in the sail for threading the fastening threads. In ancient times, this is how the rigging of a ship was formed. Nowadays, the term has expanded its meaning. Now this is an option for strengthening the edges of holes that are less strong than the cable passing through them.

The grommet is often used as a decorative device rather than a means to strengthen the material. Examples include linings in leather products, fiberboard, and foam board. A modern grommet is a mechanism made of a washer and a shaped sleeve. In this case, the material used is mainly metal or plastic.

Self-installation without special tools

You can install the eyelets yourself, without special tools. It is important to smooth the material well before installation.

What else is needed:

• sewing threads matching the tone of the main material;
• sewing needle;
• scissors;
• a piece of chalk or soap for marking;
• roulette.

You can install wooden or plastic eyelets yourself without using special tools.
Algorithm of actions:

1. Place about 3 cm down from the top edge of the curtains. Make markings (how to determine the optimal distance between the fittings, you can read later in the article) with chalk or soap.
2. Attach the eyelets to the fabric and trace along the inner diameter.
3. Use scissors to carefully cut holes.
4. Remove all protruding threads and fabric fibers.
5. The crumbling material can be carefully hemmed.
6. Place the lower parts of the fittings under the canvas, and place the upper parts on top. Press the ring with your fingers until you hear a slight click. Repeat with all holes.

In order for the curtains to slide well, the eyelets must be at least 1.5 cm wider than the rod. Paper folder staples, cords and ribbons, on the contrary, must be narrower than the holes in the rings.

Calculation of the distance between eyelets

The distance between the rings depends on the texture of the material on which they will be attached. The thicker the fabric, the further apart the rings are placed . The exception is paper. Here, the distance between the eyelets depends on the location of the staples in the folder, which will pass through the hole.

For attaching eyelets to tulle or other thin fabric, a distance of about 16 cm is considered optimal. On coarse and dense material, the gap should be about 20 cm. Particular attention should be paid to the rule for calculating the distance between the rings when installing them on thick curtains.

The same spacing will contribute to the formation of even and beautiful folds on the curtains.

It is also important to calculate how many rings will need to be installed.

To do this, you need to use the formula A = (b - 2x): 18 + 1, where:

• A – number of holes;
• c – curtain width;
• x is the distance between the center of the first or last eyelet and the edge of the curtain.

It is recommended to place the outer rings 3-7 cm from the edge of the curtain. This way they will look beautiful and the fabric will form an even wave.

Using grommet tape

Eyelet tape is needed to strengthen thin fabrics where the rings are fixed. If the base material is dense enough, then you can attach the eyelets without compaction.

The tape is a strip of fabric with finished edges. One or both sides are impregnated with a special glue, the fixing properties of which are activated at high temperatures.

How to attach ribbon to a curtain:

1. Measure the width of the tape and place a point down from the top edge of the curtain, doubling the measurement result.
2. Fold this part of the material in half, wrong side inward, and iron well.
3. Apply the tape to the edge of the resulting fold, with the glue side down.
4. Iron.
5. Wait for the fabric to cool, cut off the excess tape on the sides.
6. Use a sewing machine to stitch the top edge of the tape to secure it more securely.

For curtains that cannot be ironed, you can purchase grommet tape that matches the color and simply sew it to the top edge of the curtain. Transparent but dense ribbons are sold for tulle.

Punch for eyelets: description, scope of application

To install eyelets, round holes of a certain diameter are required, which are very difficult to make at home with improvised tools.
Experience from industries where accessories are used in the production of footwear, printing, textile products and leather goods came to the rescue. The main purpose of the grommet is to protect the edges of the hole from destruction.

Large companies use the grommet stapler as a tool for filing documents, and the rivets are often decorated with corporate symbols. Industrial enterprises use punches for grommets. Today, many companies offer for sale variants of punches for home use. This hole punch allows you to solve several problems at once: it perforates the material, bends its edges, so no additional processing of the edges is required.

Compatibility with instruments is checked individually each time.

There are the following types of punches for eyelets:

• manual;
• semi-automatic;
• automatic.

The choice of tool for installing grommets depends on what products you want to install.

Let's try to figure out which option you should choose.

It is important to understand the material, how strong the work will be, what the grommet itself will be made of, its shape and range of sizes. The choice of ring size will depend on the functional load of the product

Products come in different colors, shapes and materials.

The variability of the grommet itself will also affect the choice; you can use a metal version made of brass or steel, wood, plastic, coated or uncoated, of various shapes and sizes. Regardless of the type and shape, the fittings consist of two components: a bushing and a washer, so the principle of operation of the punch is approximately the same everywhere.

A hole is made with a punch, a sleeve and washer are applied and secured with a tool.

At the same time, the manual version of the hole punch is in great demand due to its low cost and ease of use in the original version. Usually it includes a punch, with the help of which the hole itself is made directly, a matrix into which the sleeve and washer are inserted, and embossing, by pressing which they are fixed components of the eyelet on the material.

Experts recommend purchasing devices in whole sets, but using universal, multifunctional ones is no less convenient.

Disadvantages of the manual option:

• for different grommet options you will need appropriate attachments for the embossing;
• with a high density of the material used, the process of piercing the material is labor-intensive;
• Not suitable for leather goods.

For “small things”, a hand tool with capabilities limited in terms of the size of the installed products is suitable.

Pros:

• availability;
• use at home.

In order for any eyelet installer to last as long as possible, it must be kept clean, visually inspected periodically, and lubricated with machine oil.

A semi-automatic hole punch is suitable for working with materials of increased strength, since the hole itself is punched automatically by the sharp edge of the sleeve itself

If we choose this option, then the choice of the eyelets themselves is especially important.

Hole punch eyelets must have a sharp edge.

Minuses:

Purchasing specialized eyelets.

Pros:

• versatility (suitable even for working with tarpaulins);
• availability;
• minimum effort;
• performance.

Installation pliers are not universal - the clamp for eyelets and blocks of different sizes is selected individually.

In industrial production, automatic punches are used.

Pros:

versatility in materials and eyelet sizes.

High performance.

• minuses:
• high price;
• weight and dimensions of the punch.

For large eyelets you will need more serious equipment.

Installation using specialized tools

You can install the eyelets yourself if you have special tools. Metal fittings are more difficult to fasten; hand strength is not enough for the eyelets to snap into place. Much depends on the width of the ring.

For heavy and thick fabrics, rings with a thick stem are used. In this case, the pressure on the grommet should be very large.

Installing eyelets with clips

There is a type of metal grommet with clips that can be installed by hand using a small hammer. The disadvantage of such rings is the presence of a front and back side. They are usually installed on bags and shoes.

Algorithm of actions:

1. Press the ring onto the material so that a dent remains.
2. Using the extruded lines as a guide, cut a hole.
3. Place part of the eyelet with clips under the material.
4. Place a ring with recesses on top.
5. Bend the clamps using a hammer.

Then you need to remove protruding threads and fibers of the material.

Installing eyelets using pliers

In specialized stores you can purchase pliers for installing eyelets. The tool resembles pliers. The kit comes with removable attachments of different sizes. They are called punches and matrices.

How to install eyelets using pliers:

1. Reinforce the material with grommet tape.
2. Attach a nozzle of the required size to the pliers and punch a hole.
3. Insert the part of the ring with the leg from below.
4. Close with the top half of the ring.
5. Install the nozzle into the pliers to close the ring.
6. Place the grommet between the closing parts of the pliers and slowly press them down.

It should be taken into account that such eyelets also have a front and back side. It is important to position them correctly relative to the sides of the material.

Press installation

You can install the eyelets yourself using a special press. This tool has a lever and a pressure plane. It is used for eyelets with short and long legs. The set includes punches and dies for rings of different diameters.

How to use the press:

1. Strengthen the material with adhesive tape or fold it in half.
2. Select a punch of the required size and make a hole.
3. Place part of the ring with the leg under the material.
4. Place the washer on top.
5. Place the desired matrix in the press and gently press the lever.

It is important to ensure that the washer does not slip or move, otherwise the grommet will be installed crookedly. You'll have to remove it and install a new one.

How to install grommets without tools

It is quite possible to rivet the grommet so that it closes the hole without special units; in some cases the result will be better, especially when compared with cheap, low-quality pliers.

Ways to install eyelets using improvised means:

1. A bolt with a round head slightly larger in diameter than the grommet. Instead, a bearing, steel ball, etc. are also used. The striker is placed on the walls of the grommet and hit once or twice with a cloth, then the “petals” are bent with the same hammer, striking from the center to the edge of the grommet.
2. Phillips screwdriver (or screwdriver bit). The sting is placed in the center of the grommet, on the wrong side, and the handle is lightly struck with a hammer, as if it were a hand punch. It turns out to be a quadrangle - the part is rotated 90 degrees and the blow is repeated. The walls move apart and are tapped with a hammer to make the edging flatter.
3. A blade from a stationery knife. It is placed across the block and hit from above with a hammer so as to cut the walls almost to the fabric (or other material). Rotate 90 degrees and repeat the operation. You will need 3-4 such cuts. Then the “petals” are bent and flattened with a hammer.

Advice! To avoid scratching the grommet and staining the material with a hammer or other tools, you should place a craft mat, plywood, or the like under the bottom. material, and on top - a piece of fabric.

Installation technique for curtains or tulle

Before purchasing fabric and curtain rings, you must correctly calculate the material consumption. Considering the fact that when installing eyelets, the canvas will not hang evenly, but will become wavy, more fabric will be required than the width of the window.

Since the standard distance between eyelets on thin fabrics is about 15 cm, to calculate the width of the tulle, you need to multiply the result of measuring the width of the window by 3. A narrow and often repeating wave hides a lot of material.

Thick curtains will require less fabric because the eyelets will be far apart and the wave will remain large and sparse. The width of the window must be multiplied by 2.

Further procedure:

1. Calculate the required number of rings.
2. Install grommet tape if the fabric is not stiff enough.
3. Punch holes and install eyelets.
4. Thread the rod from the cornice through the holes.

If the curtain or tulle fabric is elastic, but there is no grommet tape at hand, you can install the rings without it. You should make the holes a little smaller than necessary, then the fittings will not fall out.

Curtains for the hall

The design adds coziness to the room. Made in a single image create a feeling of unity.

Decorations for the hall are designed to bring beauty and aesthetics into the house.

Look great with different interior styles.

Styles:

• minimalism;
• modern;
• Scandinavian;
• Provence;
• high tech;
• madder;
• loft;
• modern

It is important to choose the right patterns, tones, combine, match colors with objects in the room in order to put emphasis on something. Provence supports warm, pastel colors

Multi-layering of products is appropriate in country and modern.

A minimalist style is perfect for the living room. Refinement and sophistication are its basis.

The right combination of decorations in the style of the room is the right choice for decorating your home. By combining the colors of the product and the rings you can completely transform it.

Installation on leather materials, shoes

When fixing the eyelets on the rings, it is better to use pliers or a press. It is important that the hole is smooth, so you should punch it with a special nozzle. It will not be possible to carefully cut it out with scissors, as creases and cracks will appear on the skin.

Algorithm of actions:

1. Strengthen the area where the fittings are installed by folding the material in half, with the wrong sides facing each other.
2. Mark the location of the rings with a marker.
3. Select a punch of the appropriate size and make a hole.
4. Insert the matrix tool of the required diameter, place the eyelet and secure it.

You need to work with leather only on a hard and flat surface so that the material does not deform and the fittings are fixed correctly.

Distinctive features

Thanks to them, the curtain can be closed quickly and easily. They are located so freely that they do not impede the movement of the canvas. They move smoothly and calmly along the cornice. They don’t sag, stay straight, and don’t form wrinkles. When moving, they do not affect it, ensuring wear resistance of any model.

A distinctive feature is that it can be attached to curtains. They look installed on special equipment. In fact, even a non-professional can secure them. The time and effort spent will not keep you waiting long. Carefully hung curtains compensate for the work.

In places where there are slits, beautiful natural folds are created along the entire length of the curtains, which allows you to create romantic comfort.

Installation on paper products

The easiest way to install eyelets yourself is on paper or cardboard. Those who have never installed such accessories are recommended to practice on paper before attaching the ring to fabric or leather.

Algorithm of actions:

1. Use a ruler to measure the distance between the staples that will pass through the holes. According to the result, mark the location of the rings on paper.
2. Use a hole punch to punch holes in the sheet. If the hole punch blade is too narrow. You can widen the hole by twisting the tip of a stationery knife in it. Excess paper needs to be cut off.
3. Insert the fittings with the foot on the wrong side. Cover the top with a washer.
4. Secure the eyelet with pliers or a press.

Since the small paper rings are made of thin metal, they can be secured by hand. To do this you will need some kind of cone-shaped object, such as a nail. It should fit in diameter. Using a small hammer you can secure the grommet. However, you will have to get used to it. The first attempts may be unsuccessful.

Application area

The part is widely used in the production of clothing, shoes and accessories. Shoelaces for tying shoes, belt tongues, and laces for bags are threaded into it. Another area of ​​application is parachuting, where fastening reliability plays a very important role. The awning fixing cables are also threaded into the eyelets. This use case can be seen on tourist tents, marquees, and large trucks. The device is also known to signal makers who are familiar with the arrangement of street advertising: banners with large format printing, banners, etc.

Eyelets have not bypassed the office, where sheets of paper are sealed with the help of these parts. Heavy draped curtains are also hung on these holes. At the same time, the product is still relevant for sailing ships, but now these are either private yachts or sports vessels. The device is also called a block, which is not entirely correct, because the design consists of a ring and a bushing, which is also called a block.

The grommet sleeve is also called the leg and block, the washer is called a ring, sometimes a cap.

Tips for installing grommets on a canvas awning

Tools you will need to install the grommet on the tarp by hand:

• hammer;
• bumper;
• pencil;
• roulette.

Algorithm of actions:

1. Make markings, determining the optimal distance between the rings.
2. Use a punching tool and a hammer to make holes.
3. Place the parts of the eyelets with the leg under the material. Place the washer on top.
4. Using a hammer, secure the eyelets to the awning.

It is advisable to fold the tarpaulin in half at the location where the fittings are installed so that the fastening is secure.

Awnings require rings made of durable material. Eyelets must be chrome-plated or galvanized so that the quality of fastening is not affected by aggressive weather conditions.

In addition, a special coating makes it easier for the awning to slide along the rod. You can buy plastic rings. They are easier to install and do not corrode. The main thing is to buy special eyelets for heavy materials so that they fasten well and are made of thick, wear-resistant plastic.

The manual installation method is suitable for those who have experience working with eyelets. The rest are recommended to use professional equipment that reliably solders the parts of the rings together. To attach fittings to a tarpaulin awning, flaring and nozzles for punching holes are often used.

Different types of rings are processed with appropriate rollers. If it is not possible to install the fittings professionally, you can use a hand press. Various dies and punches are always sold complete with this tool, so choosing bits for a specific ring size will not be difficult.

If the awning is intended for frequent use and there will be a heavy load on it, such as shelter from rain and wind during a hike, then reinforcement of the eyelets will be required.

To keep them even stronger and not come off during a sharp gust of wind, you need a lining made of coarse fabric. It is inserted between the 2 halves of the ring before snapping them into place. In specialized stores you can buy reinforcing tape for eyelets. It is sold in rolls of 5-15 m. You can choose the desired color and width.

It is possible to install eyelets on any material yourself. The main thing is to choose the right rings and auxiliary tools.

However, the manual installation method is suitable in cases where the fittings have to be inserted 1-2 times; for constant work with eyelets, for example, when sewing bags or clothes, professional tools will be required.

DIY sewing

Ready-made models are sold, but you can sew them yourself. Sewing will not take much time and will not be a huge task.

Step-by-step instruction

When purchasing rings, you need to focus on the color of the fabric. If you select decorative elements, for example, tiebacks, then you need to focus on them. In special kits to complete the installation on the cornice, there are not only eyelets, but also clips, tiebacks, and pins.

You need to choose natural materials, high quality and durable.

Installation will not be difficult. You can also string them onto your own curtains. Count a certain number of rings. Compare with the width of the material. The number is divided by the length of the canvas. The distance is from 15 to 25 cm.

Important! Sealing tape must be used when installing elements. Fabrics for sewing:

Fabrics for sewing:

• thick curtains;
• elegant;
• tulle;
• velvet, velor, wool.

Thick curtain fabric is most often selected for the living room or bedroom. Velvet and velor are combined with the style of the room. Light linen fabrics are more suitable for the kitchen. They do not absorb odors and do not fade in the sun.

When choosing fabric, you don’t need to skimp on the material. Take this into account for the top allowance when hemming. Leave a margin at the bottom, as it should not hang down to the floor.

Important! Good tools make for a quality installation

The style, color, density or lightness of the fabric is selected at your discretion

But it is important that they fit harmoniously into the design of the room

Tools for work

1. Hole puncher for creating holes.
2. Small tailor's scissors.
3. Forceps.
4. Chalk or just soap.
5. Centimeter.
6. Iron or press.
7. Sewing machine.
8. Grommet tape.

Installation:

1. It is necessary to process the side sections of the product.
2. Marking is carried out along the width of the canvas. Keep in mind that you need to leave 2 cm from the edge and a little more for the seam allowance.
3. The tape is ironed on the reverse side. Use gauze; delicate items require careful handling.
4. Folding the seam allowance, sew on a sewing machine.
5. Punching a hole in the fabric is done with scissors or punches.
6. The excess material is cut out. Using the previously made marks, a crosswise cut is made.
7. The diameter of the element should correspond to the cut made in the fabric.
8. Eyelets are inserted. There is one piece on the wrong side, and a second piece on top. Excess threads are removed with scissors and protruding material is tucked in. The eyelets are pressed on both sides, and so on every detail.

The methods of attaching to the cornice are not limited to this. They hang it on a bar, use special clamps, and string it on a cornice or rope.

Eyelets combine practicality, ease of use, reliable design, and ensure the durability of the product. Suitable for all rooms, they are wear-resistant. Feel free to choose and combine curtains. Installation does not take much time. At the same time, the resulting design will delight you for many years.

Sometimes even changing one detail can change a room beyond recognition, and beautiful eyelet curtains may well be that.

How to sew curtains and tulle on eyelets yourself - step-by-step instructions

Sewing curtains yourself using eyelets will take some time. However, unlike products purchased or ordered from an atelier, making them yourself will cost much less. Costs will be associated only with the acquisition of the necessary material.

Fabric calculation

Having determined the total amount of material, calculations are made taking into account hems, where the allowance is:

• lower edge – 8–10 cm;
• the upper part can be up to 25 cm. Such a margin is required, since the eyelets must be attached to several layers of fabric;
• lateral edges – 3–4 cm.

In the case of sewing a curtain consisting of two parts, in order to fit the pattern, the material is taken with a reserve.

Tools and materials

To attach grommets to curtains you will need:

• grommet tape;
• scissors;
• ruler;
• pins for marks;
• chalk with a pointed end;
• pliers.

To install metal rings, you also need a hammer drill, a hammer, and a rubber gasket. The latter is necessary to soften the blows of the hammer on the fittings during fastening.

Initial material processing

Before securing the rings, the fabric is pre-compacted. After all, even dense material is not able to withstand the loads from the fittings installed on it for a long time. This applies to both plastic and metal products.

Therefore, to reduce the load on the curtain, a grommet tape is pre-attached. However, if it is not possible to use such a tape, then dublerin can be an alternative sealant. Although this material is inferior in its characteristics, it is still quite suitable as a reinforcing element. In any case, the tape is selected so that its width is greater than the outer diameter of the rings.

The upper part of the fabric is folded twice to the width of the installed tape, and the fold is ironed. In turn, on the sides, the seal is cut off with a margin equal to the width of the hem. After the manipulations, the canvas unfolds, and the tape is adjusted along the intended upper fold and secured with an iron. To ensure that no traces of a hot electrical appliance remain on the canvas, the work is carried out through a sheet of paper. To more securely fasten the eyelet tape, a seam is made along the very edge of the hem.

Markings for eyelets

After the grommet tape is secured, dots are applied to the curtains indicating the centers of the fittings. The marked places are marked with pins. Then the contours of the holes along the inner diameter of the eyelets are marked on the fabric, and the intended part is cut out along them with a margin of 2 mm. After that, rings are installed on both sides and snapped or pressed with a press.

Tip: To speed up and make work easier, use a flaring tool and a punch.

At this stage, the main task is to apply the central points evenly. To ensure that the edges of the curtain are in the same position, there should be an odd number of spaces between the eyelets.

Marking and preparing holes

Before installing fasteners, you should mark the product. The eyelets should be installed at intervals to prevent sagging of the material between them. Having placed the inserted grommet in the right place, circle it (the sleeve along the outer edge or the ring along the inner edge).

You may also be interested in: Flexible cornice - choose the type and install it yourself

Then the holes are prepared. If their diameter is small, the holes can be pierced with an awl. Sometimes a hole punch is used for piercing. To prepare larger holes, punches are used. If there is no suitable tool, you can use a specially made homemade one. To do this, you need to select a tube of a suitable diameter and sharpen one of its edges. The hole should be such that the grommet bushing is inserted tightly, but does not cause tears or deformation of the material. It is convenient to punch holes on a piece of thin rubber or linoleum.

If the holes need to be large, make a cross-shaped cut with scissors and then cut out the excess material. The bushings should be inserted from the front side, and the rings should be put on from the back. The installation of plastic fasteners ends here.

Video of installing plastic eyelets with your own hands: