PVC window profile Proplex

PVC profile Proplex-Optima

The appearance of the Proplex-Optima profile is designed in a modern style - without excessive pretentiousness, in a discreet technological manner.

Profile production is controlled by a specially developed quality assurance system. It includes both control of the production process itself (incoming quality control of raw materials, control at various stages of the technological process, control of finished products - a total of 21 inspection points), and quality assurance subsystems for all service and management processes.

The profile in the mass is milky white with a semi-matte (non-glare) surface.

Advantages of the Proplex-Optima profile:

The design and location of the impost chambers eliminate the possibility of freezing of the profile. The reinforcing profile chamber is located between two small chambers, which prevents heat from flowing through the metal. The reinforcing profile itself has a gap on one side, designed to compensate for changes in linear dimensions with temperature changes. Inside the profile, the reinforcing liner is located with a slot towards the outside, since it is outside that sharp temperature changes occur (heating from the sun, frost, etc.)
Special grooves on the hidden profile planes facilitate the fastening of fittings and reinforcement liners, preventing the screws from being torn off and accurately marking the attachment points
The bead is manufactured with a co-extruded seal. Such a seal, unlike a stretched one, does not decrease in size over time and does not “dry out” or crack.
The design of the bead ensures stepless interfacing with other profiles (dirt does not accumulate at the joint).
The use of transition profiles for glazing beads is not required when producing fixed windows.
The window system uses only two types of reinforcing profiles, while other systems have an average of about four.
The large size of the preliminary chamber improves thermal protection performance.
The presence of bosses on the sashes ensures reliable fastening of the self-tapping screws for the hinges.
The tides in the outer chamber of the window frame reliably fix the screws for fastening the fitting hooks.

Proplex window systems

The enterprise is equipped with modern equipment from engineering companies from Austria and Germany. Proplex pays special attention to the selection of raw materials and components, using materials from leading suppliers from Austria, Germany, France, Russia and the USA in production.

Proplex system of plastic profiles is designed for the manufacture of all types of windows and doors of any premises and is specially adapted to Russian operating conditions.

All Proplex comply with the requirements for plastic windows for thermal insulation, as well as all modern international standards. Windows from the Proplex are recommended for installation in children's, preschool and medical institutions (appendix to the certificate of conformity No. ROSS RU.SL08.N00097 FROM 12/15/05);

Today, Proplex has the largest network of its own regional ones in the Russian Federation, which allows it to ship products in the shortest possible time. Since 2000, more than 17 million Proplex .

Brief technical characteristics of the Proplex 58 profile

Profile installation width: 58 mm
Number of profile cameras: 3
Glazing thickness: 24 mm (single-chamber) - 32 mm (double-chamber)
Height of the outer wall of the glass unit: 2.7 mm
Reduced heat transfer resistance (max.) – 0.64 (with amplifier), 0.75 (without it) m2°C/W
Tightness - class A
Service life – up to 60 years.
Products are certified

Peculiarities

The appearance of the profile is designed in a modern style. The profile in the mass is milky white with a semi-matte (non-glare) surface.
Profile production is controlled by a specially developed quality assurance system. It includes both control of the production process itself (incoming quality control of raw materials, control at various stages of the technological process, control of finished products - a total of 21 inspection points), and quality assurance subsystems for all service processes.
The design of the bead ensures stepless interfacing with other profiles (dirt does not accumulate at the joint.
Special grooves on the hidden surfaces of the profile facilitate the fastening of fittings and reinforcing liners, preventing the screws from being torn off and accurately marking the attachment points.
Optimal price compared to imported analogues.

Brief technical characteristics of the Proplex Comfort profile

Profile installation width: 70 mm
Number of profile cameras: 4
Glazing thickness: 24-32 mm (single-chamber), 32-40 (double-chamber)
Height of the outer wall of the glass unit: 2.7 mm
Reduced heat transfer resistance (max.) – 0.69 (with reinforcing amplifier) and 0.79 (without it) m2°C/W
Tightness - class A
Fittings system -12/20-9
Service life – up to 60 years.
Class for resistance to climatic influences (according to GOST 30673-99) – frost-resistant version.
Service life – up to 60 years. Products are certified

Peculiarities

The appearance of the profile is designed in a modern style. The profile in the mass is milky white with a semi-matte (non-glare) surface.
A mixture composition developed specifically for Russia is used. Proplex profiles are recognized as frost-resistant profiles and are recommended for installation in any climatic zones of Russia, including in the Far North
Compared to three-chamber profiles, windows from the Comfort provide better heat and noise protection, and compared to five-chamber profiles - a better price.

PVC profile Proplex-Comfort

We present to your attention the 4-chamber PROPLEX-Comfort system , which is a logical development of the PROPLEX line of profile systems and created in full compliance with modern requirements for the quality of window profiles.
Now you can provide customers with the opportunity to choose among 2, 3, 4 and 5-chamber profile systems under our brand, each of which has a number of specific advantages and carries a specific functional load. Main technical characteristics of the PROPLEX-Comfort system:

installation depth - 70mm;
infill thickness −12: 40 mm;
fittings system −12/20-9;
design class (according to GOST 30673-99) - four-chamber;
class for the thickness of the front walls (according to GOST 30673-99) - B;
class for resistance to climatic influences (according to GOST 30673-99) - frost-resistant design;
class for reduced heat transfer resistance (according to GOST 30673-99) - 2;
heat transfer resistance 0.79 m2*C/W.

Quality characteristics:

For all PROPLEX profile systems, including PROPLEX-Comfort, a mixture composition developed specifically for Russia is used. PROPLEX profiles are recognized as frost-resistant profiles and are recommended for installation in any climatic zones of Russia, including in the Far North;
an installation depth of 70 mm provides an increased level of thermal protection and allows customers to significantly save on heating in winter, which becomes especially important for houses (premises) with an autonomous heating system;
the milky white color of PROPLEX profiles belongs to a warm palette and creates a feeling of psychological comfort in the room;
windows from the PROPLEX profile are recommended for installation in children's, preschool and medical institutions;
Compared to three-chamber profiles, windows from the Comfort series profile provide better heat and noise protection, and compared to five-chamber profiles - a better price.

Technical characteristics of the Proplex profile and drawings of the Optima window system.

3 - number of internal functional chambers
0.65 - heat transfer resistance
The seal consists of 2 continuous contours. Material: weather-resistant EPDM rubber
glass thickness can reach 32 mm

Our reputation is impeccable, and we intend to maintain it the same, achieving a leading position in the market, together with Proplex. Cooperation with the manufacturer means not only that we receive materials first-hand, but also the responsibility that we hold to consumers for the products we offer.

For all the time that we have been installing windows, there has not been a single negative review regarding the quality of Proplex.

PVC profile Proplex-Premium

Advantages of the Proplex-Premium profile:

The increased coefficient of resistance to thermal conductivity is achieved thanks to the five-chamber design and the profile width increased to 70 mm. And also by the fact that the reinforcing profile is separated from the outer front wall by at least two preliminary chambers, and from the inner front wall by 1-2 chambers, which reduces the likelihood of the formation of cold bridges and thereby increases the overall coefficient of thermal conductivity resistance. The increased width of the glass rebate allows the use of the entire range of double-glazed windows, including frost-resistant ones, up to 40 mm thick.
The fold under the glass unit has a slight slope to free the cavity from condensation. When installing the filling into the rebate, a compensation spacer is installed under the glass unit, distributing the load on the rebate, on which, in turn, spacer adjusting spacers are installed.
In order to start producing windows from the PROPLEX-Premium system, it is enough to expand the range by only 3 profiles (frame, sash, impost). The system is concise in the number of profiles used, necessary for the production of basic types of windows.

Interchangeable (universal) components:

Bead profiles from the standard system are suitable.
The design of the lower frame profile hooks allows for the use of additional profiles from the standard system.
The profile is reinforced with standard reinforcing profiles (art. 207 and 203).
The same seals are used.
The fitting system is 12/20-9, the same as that used when using the standard system.

Internal partitions form a chamber under the reinforcing profile. To simplify the orientation of the reinforcing profile, as well as to form an air gap inside the chamber, additional bosses are provided on which the reinforcing profile rests.
The PROPLEX-Premium profile system uses only two types of standard configuration reinforcing profiles. Reinforcing profiles for the frame and impost are made in the form of a rectangular pipe.
On the hidden surfaces of the profile there are technological recesses (“grooves”) to facilitate the installation of fittings and reinforcing profiles. The use of “recesses” reduces the possibility of “turning” the screws, accurately marking the attachment points.
The design of profiles of the PROPLEX-Premium system uses “booms” to ensure more reliable fastening of self-tapping screws in the profile body by increasing their contact area. When installing hinges on the sash profile, fastening with self-tapping screws is carried out through one front and two inner walls.
Calculation of technological dimensions is carried out using the same formulas as when calculating a standard system. There is no need to make changes to the calculation methodology.

PROPLEX-Premium is universal, concise and high frost resistance.

Proplex window systems

Proplex system of plastic profiles is designed for the manufacture of all types of windows and doors of any premises and is specially adapted to Russian operating conditions.

Brief technical characteristics of the Proplex 58 profile

Profile installation width: 58 mm
Number of profile cameras: 3
Glazing thickness: 24 mm (single-chamber) - 32 mm (double-chamber)
Height of the outer wall of the glass unit: 2.7 mm
Reduced heat transfer resistance (max.) – 0.64 (with amplifier), 0.75 (without it) m2°C/W
Tightness - class A
Service life – up to 60 years.
Products are certified

Peculiarities

The appearance of the profile is designed in a modern style. The profile in the mass is milky white with a semi-matte (non-glare) surface.
Profile production is controlled by a specially developed quality assurance system. It includes both control of the production process itself (incoming quality control of raw materials, control at various stages of the technological process, control of finished products - a total of 21 inspection points), and quality assurance subsystems for all service processes.
The design of the bead ensures stepless interfacing with other profiles (dirt does not accumulate at the joint.
Special grooves on the hidden surfaces of the profile facilitate the fastening of fittings and reinforcing liners, preventing the screws from being torn off and accurately marking the attachment points.
Optimal price compared to imported analogues.

Brief technical characteristics of the Proplex Comfort profile

Profile installation width: 70 mm
Number of profile cameras: 4
Glazing thickness: 24-32 mm (single-chamber), 32-40 (double-chamber)
Height of the outer wall of the glass unit: 2.7 mm
Reduced heat transfer resistance (max.) – 0.69 (with reinforcing amplifier) and 0.79 (without it) m2°C/W
Tightness - class A
Fittings system -12/20-9
Service life – up to 60 years.
Class for resistance to climatic influences (according to GOST 30673-99) – frost-resistant version.
Service life – up to 60 years. Products are certified

Peculiarities

The appearance of the profile is designed in a modern style. The profile in the mass is milky white with a semi-matte (non-glare) surface.
A mixture composition developed specifically for Russia is used. Proplex profiles are recognized as frost-resistant profiles and are recommended for installation in any climatic zones of Russia, including in the Far North
Compared to three-chamber profiles, windows from the Comfort provide better heat and noise protection, and compared to five-chamber profiles - a better price.

Source: 4-okna.ru

PVC profile Proplex-Outline

The PROPLEX OUTLINE system is intended for glazing:

balconies and loggias of residential buildings;
summer houses;
non-residential buildings;
production premises.

Distinctive features of the PROPLEX OUTLINE system:

The two-chamber profile in terms of heat transfer resistance (0.405 m2 0C/W) and strength of corner welded joints (frame - 1000N, sash - 1350N) meets the requirements of GOST 30673-99 and SNiP 02/23/2003 for translucent enclosing structures (Test report No. 27- 11/051/1 dated December 23, 2005).

In addition to the obvious price advantage, the PROPLEX OUTLINE system has a number of advantageous distinctive features from PVC and aluminum systems used for balcony glazing:

Compared to aluminum profiles, products made from PVC profiles retain heat better;
Compared to aluminum profiles, PVC profile products provide better sound insulation;
Compared to sliding aluminum profiles, products made from PVC profiles provide better tightness and guarantee no blowing;
PVC profiles, which are less aluminum, are susceptible to mechanical damage (scratches) both during processing, transportation, installation, and during subsequent everyday use;
Almost the same range of components is used in production as in the manufacture of windows from the PROPLEX-Optima system. This minimizes the company's inventory and purchasing costs;
the presence of additional profiles allows for glazing of objects with complex geometry;
the PROPLEX OUTLINE system uses standard 12/20-9 fittings;
to work with the PROPLEX OUTLINE system, it is enough to purchase an additional set of equipment;
possibility of installing double-glazed windows.

Technical information on the PROPLEX OUTLINE system:

Glass, single- and double-glazed windows up to 22 mm can be mounted in the profiles.
Advantages of glazing beads: ease of installation and replacement of double-glazed windows.
The design of the bead ensures stepless interfacing with the frame (dirt does not accumulate at the joint).
Linings for double-glazed windows ensure optimal distribution of loads on the end of the double-glazed window.
Weather- and wear-resistant seals prevent water from penetrating into the glass rebate.
A co-extruded glazing bead seal, unlike a stretched one, does not dry out or crack, and does not shrink in size over time, which ensures long-term tightness.
The seals fit tightly and do not lose their functional properties for many years; thanks to their elasticity, they ensure easy opening and closing of the sashes.
The edges of the profile are rounded. Water does not linger on the ledges and flows down easily.
The frame, sash and impost are reinforced with metal liners. This allows the structure to withstand wind loads and prevent the sash from sagging under the weight of the double-glazed windows.
Drainage holes in the sash and frame ensure the removal of water and condensate.
It is possible to hide the holes with drainage covers. The tides in the internal chambers of the profiles reliably fix the self-tapping screws for fastening the fittings.
Condensate is drained along the inclined part of the profile fold.

PVC systems PROPLEX – Austrian technologies to protect comfort

Proplex PVC systems are designed for the manufacture of windows and doors for any premises and are specially adapted to the operating conditions of our country. The profile system meets all thermal insulation requirements, as well as all major international standards.

At the moment, the Proplex company supplies the following PVC profile systems for window and door structures:

PROPLEX-Optima (three-chamber, 58 mm);
PROPLEX OUT-DOOR (96/116) (three-chamber, 58 mm);
PROPLEX OUTLINE (two-chamber, 46 mm);
PROPLEX-Comfort (four-chamber, 70 mm);
PROPLEX-Premium (five-chamber, 70 mm);
PROPLEX-Lux (“wide” 127 mm frame);

Why choose Proplex windows?

The Proplex company produces high-quality polyvinyl chloride profiles for the manufacture of plastic windows and doors, confirmation of the highest consumer qualities of which are the results of numerous tests and tests carried out by various institutes and laboratories, from which it is clear that the Proplex window profile system in many respects exceeds existing standards established in countries Europe.

Windows made from the Proplex profile are recommended for use in government institutions, such as kindergartens, hospitals, maternity hospitals, which traditionally have high requirements for product quality. Such windows are optimal in any climatic zones of Russia and the CIS countries.

In 2002, the Proplex window and door profile system was awarded the “Russian Mark” gold quality mark.

Over 10 years of operation, Proplex has become one of the five leading companies in the PVC profiles market out of more than a hundred brands existing today in terms of production and sales volume, as well as brand awareness according to marketing research statistics for 2005-2008.

Proplex has all the necessary certificates , and also meets international requirements for the quality of PVC profiles, established by international standards ISO 306, din 53453-7, as well as ral gz 716/1.

The PVC profile system is designed for doors and windows located in any premises, and is also specially adapted to Russian conditions and meets thermal insulation standards and basic international standards.

At the design stage, Proplex took into account the shortcomings of the profiles of existing systems on the market, as well as the specific environmental and climatic conditions of Russia. Proplex windows are one of the few that meet increased requirements regarding heat and sound insulation.

Profiles are produced in Austria on high-tech lines of companies recognized as leaders in this field, using the original recipe of PVC mixtures and additives, the uniformity of which is considered the best in the industry, and which was specially developed by Chemson. In terms of its color qualities and strength, the Proplex profile is considered one of the best among existing window and door systems.

As of 2009, more than nine and a half million Proplex plastic windows were installed.

By choosing Proplex PVC profile you get the best price-quality ratio.

Distinctive features of the Proplex profile.

s is a system developed for the Russian climate. The design took into account the disadvantages of other profiles, as well as the specific climate of Russia. The Proplex profile has become one of the few systems that fully comply with high requirements and global standards for thermal insulation.

The surface of the profile is even and smooth, it is semi-matte. No special care is required, and occasional abrasions and scratches are almost noticeable. Having been successfully operating for 15 years, Proplex has settled into the top five leaders of the window market in terms of indicators such as production and sales volumes, as well as brand awareness.

The service life of the profile is 60 conventional years. In 2007, it passed new tests, as a result of which it became known that its durability had increased.

The design of the profile system is simple and technologically advanced. Any window shape can be made. They provide comfort, protection from noise and allow you to save on energy consumption.

Our company began its activities more than 10 years ago with cooperation with the Proplex company. Our employees are constantly trained and receive the latest information from the profile manufacturer. This allows us to produce the best Proplex windows in Belarus.

Source: www.okna-may.by

Proplex windows technical specifications

PROPLEX is the first Russian developer and largest manufacturer of PVC window systems using Austrian technologies. The plant for the production of PVC window profiles and window sills was built in 1999 in the Moscow region by a team that stood at the origins of the Russian window industry. The enterprise is equipped with modern equipment from engineering companies from Austria and Germany. PROPLEX pays special attention to the selection of raw materials and components, using materials from leading suppliers from Austria, Germany, France, Russia and the USA in production.

PROPLEX Optima | System 58mm

PROPLEX-Optima is a system of high-quality three-chamber PVC profiles for the production of window structures.

The design of the PROPLEX™ PVC profile system is quite simple and technologically advanced and allows the production of windows of any shape. PROPLEX™ windows installed in an apartment, office or country house will provide an excellent level of comfort, protect against excessive noise and allow significant savings in energy consumption.

Specifications:

Number of cameras in profile - 3
System width, mm - 58
Reduced heat transfer resistance of the profile, m2*S/W - 0.75 (0.64)
Reduced heat transfer resistance of the window, m2*S/W - 0.75
Double-glazed window width, mm - 4-34
Fittings system - 12/20-9
Profile durability, standard years - 60

Information from the official PROPLEX website

PROPLEX Balcony | System 46mm

The PROPLEX-BALCONY system is designed for glazing:

balconies and loggias of residential buildings;
summer houses;
non-residential buildings;
production premises.

In addition to the obvious price advantage, the PROPLEX-BALCONY system has a number of advantageous distinctive features from PVC and aluminum systems used for balcony glazing:

Compared to aluminum profiles, products made from PVC profiles retain heat better;
Compared to aluminum profiles, PVC profile products provide better sound insulation;
Compared to sliding aluminum profiles, products made from PVC profiles provide better tightness and guarantee no blowing;
PVC profiles, which are less aluminum, are susceptible to mechanical damage (scratches) both during processing, transportation, installation, and during subsequent everyday use;
Almost the same range of components is used in production as in the manufacture of windows from the PROPLEX-Optima system. This minimizes the company's inventory and purchasing costs;
the presence of additional profiles allows for glazing of objects with complex geometry;
the PROPLEX-BALCONY system uses standard 12/20-9 fittings;
to work with the PROPLEX-BALCONY system, it is enough to purchase an additional set of equipment;
possibility of installing double-glazed windows;

Specifications:

Number of cameras in profile - 3
System width, mm - 46
Reduced heat transfer resistance of the profile, m2*S/W - 0.55 (0.45)
Reduced heat transfer resistance of the window, m2*C/W - 0.63
Double-glazed window width, mm - 4-24
Fittings system - 12/20-9
Profile durability, standard years - 60

Information from the official PROPLEX website

PROPLEX Comfort | System 70mm

We present to your attention the 4-chamber PROPLEX-Comfort system, which is a logical development of the PROPLEX line of profile systems and created in full compliance with modern requirements for the quality of window profiles. Now you can choose from 2, 3, 4 and 5 chamber profile systems under our brand, each of which has a number of specific advantages and carries a specific functional load.

Quality characteristics:

For all PROPLEX profile systems, including PROPLEX-Comfort, a mixture composition developed specifically for Russia is used.
PROPLEX profiles are recognized as frost-resistant profiles and are recommended for installation in any climatic zones of Russia, including in the Far North;
an installation depth of 70 mm provides an increased level of thermal protection and allows customers to significantly save on heating in winter, which becomes especially important for houses (premises) with an autonomous heating system;
the milky white color of PROPLEX profiles belongs to a warm palette and creates a feeling of psychological comfort in the room;
windows from the PROPLEX profile are recommended for installation in children's, preschool and medical institutions (appendix to the certificate of conformity No. ROSS RU.SL08.N00097 FROM 12/15/05);
Compared to three-chamber profiles, windows from the Comfort series profile provide better heat and noise protection, and compared to five-chamber profiles - a better price.

Related article: Adjusting the flap of a plastic window

Specifications:

installation depth - 70mm;
filling thickness -12: 40 mm;
fittings system -12/20-9;
design class (according to GOST 30673-99) - four-chamber;
class for the thickness of the front walls (according to GOST 30673-99) - A, B;
class for resistance to climatic influences (according to GOST 30673-99) - frost-resistant design;
class for reduced heat transfer resistance (according to GOST 30673-99) - 2;
heat transfer resistance 0.79 m2*C/W.

Information from the official PROPLEX website

PROPLEX Comfort Plus | System 70mm

We present to your attention the 4 (5) chamber system PROPLEX-Comfort Plus, which is a logical development of the line of PROPLEX profile systems and created in full compliance with modern requirements for the quality of window profiles. Now there is a choice among 2, 3, 4 and 5 chamber profile systems under the PROPLEX brand, each of which has a number of specific advantages and carries a specific functional load.

Specifications:

Number of cameras in profile - 4.5
System width, mm - 70, 88
Reduced heat transfer resistance of the profile, m2*S/W - 0.79 (0.70)
Reduced heat transfer resistance of the window, m2*C/W - 0.83
Double-glazed window width, mm — 22-52
Fittings system - 12/20-13
Profile durability, standard years - 60

Information from the official PROPLEX website

PROPLEX Comfort Premium | System 70mm

PROPLEX-Premium is a system of high-quality five-chamber PVC profiles for the production of window structures.

Design features of the PROPLEX-Premium profile:

The increased coefficient of resistance to thermal conductivity is achieved thanks to the five-chamber design and the profile width increased to 70 mm. And also by the fact that the reinforcing profile is separated from the outer front wall by at least two preliminary chambers, and from the inner front wall by 1-2 chambers, which reduces the likelihood of the formation of cold bridges and thereby increases the overall coefficient of thermal conductivity resistance. The increased width of the glass rebate allows the use of the entire range of double-glazed windows, including frost-resistant ones, up to 40 mm thick.
The fold under the glass unit has a slight slope to free the cavity from condensation. When installing the filling into the rebate, a compensation spacer is installed under the glass unit, distributing the load on the rebate, on which, in turn, spacer adjusting spacers are installed.
Internal partitions form a chamber under the reinforcing profile. To simplify the orientation of the reinforcing profile, as well as to form an air gap inside the chamber, additional bosses are provided on which the reinforcing profile rests.
The PROPLEX-Premium profile system uses only two types of standard configuration reinforcing profiles. Reinforcing profiles for the frame and impost are made in the form of a rectangular pipe.
On the hidden surfaces of the profile there are technological recesses (“grooves”) to facilitate the installation of fittings and reinforcing profiles. The use of “recesses” reduces the possibility of “turning” the screws, accurately marking the attachment points.
The design of profiles of the PROPLEX-Premium system uses “booms” to ensure more reliable fastening of self-tapping screws in the profile body by increasing their contact area. When installing hinges on the sash profile, fastening with self-tapping screws is carried out through one front and two inner walls.
Calculation of technological dimensions is carried out using the same formulas as when calculating a standard system. There is no need to make changes to the calculation methodology.

Specifications:

Number of cameras in profile - 5
System width, mm - 70
Reduced heat transfer resistance of the profile, m2*C/W - 0.84 (0.76)
Reduced heat transfer resistance of the window, m2*C/W - 0.81
Double-glazed window width, mm — 12-42
Fittings system - 12/20-19
Profile durability, standard years - 60

Information from the official PROPLEX website

PROPLEX Optima (door system) | System 58mm

PROPLEX-Optima is a system of high-quality three-chamber PVC profiles for the production of window structures.