A cutter for a metal profile for drywall

Today, drywall is very popular. It is used to level walls, create partitions and decorative structures. GKL is mounted on a metal profile lathing, the individual elements of which are fastened with special self-tapping screws. At the same time, their caps sometimes interfere with the tight fit of the plasterboard sheets. To avoid this, a drywall cutter is increasingly being used.

What is a cutter

A cutter is a hand-held tool that is used in installation work to connect metal profiles into frames, as well as for fixing sheet products.

This technology involves making holes in materials superimposed on each other. In this case, the ends of the holes on the reverse side are formed with rolling, which ensures a strong connection.

The area of use of the cutter began to expand rapidly after the spread of profile systems for plasterboard in repair and construction work.

The formal purpose of the tool is to quickly install metal frames of suspended ceilings and plasterboard partitions.

The design of the cutter is quite simple, including several elements:

a movable handle connected to a lever and a punch;
a bracket having two legs and a stop with a recess;
fixed handle fixed to the bracket.

For convenient storage of the tool in a suspended position, a loop is provided. The movement of working elements is carried out using movable axes.

The operating principle of different types of cutters remains unchanged:

the operator applies force to the movable lever;
translational movements of the punch are formed;
The punch, resting against the profile, makes holes in its plane until it stops.

The edges of the holes are bent, thanks to which it is possible to create a reliable and durable connection.

The degree of impact on the tool depends on the force applied. The punch easily passes through the entire thickness of the plasterboard sheet due to the length of the lever and additional attachment mechanisms.

Tool structure

The profile cutter consists of the following parts:

two extended handles;
working part. On one side it has a working head with a bat. On the other side, jaws with a hole for a bat are attached to it;
connecting parts. They are located between the jaws so that the bit influences the front part of the part. This includes the punch and die. They are the ones that most often need to be replaced during the operation of the tool. You can buy a set of these elements with different parameters (size and shape) at once, so as not to run to the store every time.

Note! It is not recommended to replace the punch or die frequently. This can lead to rapid breakdown of the seat and, as a result, malfunction of the entire tool.

The device of the cutter
Often, a manual cutter for connecting profiles has a straight head. Here only one bit is inserted into the slot. But there are tool models equipped with a turret head. It is a type of drum on which bits with different diameters are attached. The equipment is easily changed by turning the drum. The hand tool is designed to be used with one hand. It is much easier to work with than a stapler.

Advantages disadvantages of work

Using a cutter in the installation of a frame made of profiles has a number of advantages.

There is no need to purchase and use other fasteners. Taking into account the purpose of the tool, we are talking about self-tapping screws and self-tapping screws.
The device does not leave any dents on the surface after passing through the profiles.
Save working time and labor costs on marking. When creating connections using clamps, there is no need to mark control points and lines.
The holes are formed smooth, which eliminates subsequent processing.
Installation work is completed faster than when using hardware.
There are no protruding heads from self-tapping screws that prevent the sheet material from tightly adhering to the surface of the frame.

To construct a frame from profiles, self-tapping screws or a cutter are used. Each option has its own advantages and disadvantages. It is inappropriate to compare them, since prerequisites have been derived for them that predetermine the appropriateness of a particular method.

To create frame structures of increased strength, it is recommended to choose the method of creating connections using hardware. This gives additional durability and rigidity under heavy loads. To eliminate the problem with protruding caps, use flat self-tapping screws with a press washer.

Connections using a cutter are quite reliable, but stability is observed only in certain directions. When a load is created at an unnatural angle, the profiles may become detached from the frame.

This method is not suitable for installing ceiling structures. And using a tool to form the sheathing is a completely reasonable solution. The method is also suitable for temporary fastening of materials. To further strengthen the support, you need to add screws. There will be no excess consumption of material, since the combined option involves increasing the interval between hardware.

The following factors stand out among the disadvantages of using a cutter:

inability to withstand heavy loads;
the difficulty of operating the tool with one hand (especially for inexperienced craftsmen);
difficulties in disassembling the frame during dismantling, when it is planned to reuse the material (the whiskers on the reverse side are not easily unclenched, and it is important not to deform the profile itself).

Features and varieties

The advent of drywall changed construction in a new direction. Today it is used for most types of repair work. Partitions are used in residential buildings, public buildings, educational institutions and offices. Thanks to the facing material, builders create multi-level ceilings, which makes the room cozy and allows you to hide communication systems.

Cladding is only a small part of the scope of application of plasterboard; it is also used to create designer columns or facades. And everywhere there is only one requirement for it - connection reliability and durability. Therefore, most professionals prefer to use a metal profile cutter. The tool has good durability and works flawlessly.

Three modifications of the cutter are sold in stores:

Small size. The option is intended for domestic use. The advantages of the model are ergonomics and low price. The quality of the connection is no different from premium products, but there are also disadvantages, for example, there are often defects or low-quality tools that break after a single use.
Reinforced. Such designs are intended for construction work by repair teams. It is recommended to use only for wall cladding on a domestic or commercial scale. Because the tool will not withstand excessive load and will break.
Professional. Only used when complex projects need to be completed to decorate or cover floors, ceilings or walls. The model is indispensable when carrying out major repairs at production sites or during the creation of partitions for office premises.

The first two options attract users with their low price and compactness. They are easy to transport in your pocket or toolbox. Following the recommendations specified by the manufacturer, the service life of the device will be from 2 to 4-5 years. However, the latter figures are only possible if the cladding is carried out every six months.

A professional cutter is an indispensable assistant for the implementation of complex construction projects. The advantage is the ability to operate for an hour or more, while it has wide functionality, which allows operations to be carried out faster and with better quality.

There are other types of cutters: flexible, devices that use a needle roller and cassette ones. The one that is suitable for the current job is selected. Because not all tools can be equally good.

Criterias of choice

In the absence of experience in using a cutter, it is difficult to choose a tool among a huge assortment. Therefore, it is recommended to take into account the advice of experts.

The first step is to decide for what purpose you are purchasing:

volume and nature of work;
duration of the planned installation.

The answers to these questions allow you to find out whether it is worth spending money on a hinge mechanism, or whether you can get by with a classic type design.

For wall coverings in several rooms, you should consider models from well-known manufacturers. A professional tool can withstand long-term installation. When choosing it, attention is paid to such parameters.

Type of cutter

Pliers for fixing profiles are available in different versions.

Manual - completely cope with the operation, but have limited capabilities. Such models are called amateur. They are used for periodic work with light loads.
Reinforced - with such a tool you can safely work with thick metal. Cutters are used primarily by repair teams. Some models have removable elements, which expands their range of capabilities.
Professional - in such designs there are multi-stage levers that transmit mechanical reinforcement to the punch. This is generally a heavy tool, suitable for large-scale construction work. They are not easy to operate; they require experience and skill. After flashing it leaves neat and even holes.

One-handed and two-handed . Designs can be one-handed or two-handed. The first option is equipped with a spring that opens the handles after squeezing them is completed. It is easier to work with such a tool, especially if the profiles are made of high-quality metal. Two-handed pliers can handle thicker profiles. However, it will not be possible to operate them with one hand due to the large distance between the handles.

Handle coating . The tool is made of durable alloys. Most models on the market are made of tool steel. The handles may or may not have anti-slip coating. Rubber, heat-resistant plastic and other polymer materials are used as protective materials.

Profile properties . In this case, the type of materials being joined is taken into account. Hand tools are capable of making holes in guides with a thickness of 0.55 mm. When installing ceiling frames and thick profiles, it is recommended to choose a tool with a reinforced mechanism. An option such as replacing the cutting punch is also welcome. These models easily make holes in metal 1.5 mm thick.

Hole diameter . Making large diameter holes will require a lot of effort. A set of bits is included with the tool. Their parameters determine the range of capabilities of the cutter. For example, the set includes bits from 2 to 5 mm. These will be the minimum and maximum diameters of the holes.

Weight . Another important criterion is the weight of the ticks. Hand tool work is performed with one hand. A structure that is too heavy will complicate an already difficult task. Therefore, when choosing a model, it is important to try on the cutter in your moving hand (move it to the sides, raise and lower the product). If your hand gets tired from primitive manipulations, it’s better to look at other options.

What else should be taken into account when choosing pliers:

maximum thickness of connected profiles;
length of the handles (the model is selected taking into account physiological abilities);
build quality;
presence of backlash;
comfortable grip of the handles;
durability of the coating;
user reviews regarding products of a particular brand.

Tips for use

A cutter is a very simple and undemanding tool, however, it also requires proper care and compliance with certain rules:

most cutters are designed for a total profile thickness of no more than 1.5 mm;
you can’t make breakthrough breakthroughs;
hitting is also prohibited;
The cutter must be placed strictly perpendicular to the plane of the profiles being pierced;
you cannot make a breakdown in the place where the profile is built up or joined;
The hinges need to be lubricated periodically.

A profile cutter for drywall is a simple and convenient tool. Even a beginner can assemble a frame with its help.

How to use the cutter

Installation work can be completed efficiently by adhering to the following rules for using pliers.

How to fasten a ceiling profile (PP) with a guide profile (PPN) using a conventional cutter

You should start by checking the functionality of the tool. To do this, it is suggested to make several test connections. Based on the nature of the passage of working elements into the plane of the profiles and the quality of the holes, appropriate conclusions are drawn.
The next step is to check the strength of the connections. Under the influence of forces, the reliability of the frame is controlled. A negative result may indicate low quality of the metal from which the profiles are made. In this case, it is better to make connections with self-tapping screws or replace weak material. Professional flaring does not guarantee a long service life of the frame structure when connected with a cutter.
Installation work begins with installing the profile. To do this, make markings by placing two parts overlapping.
The junction is grabbed with pliers. Next, the steel sheet is slightly split.
The junction of the steel elements is fixed by squeezing the handle. The grip is weakened when using a mechanism with a return spring.
After releasing the tool, check the strength of the connection.

The quality of the equipment directly influences the result of the connection. If, after fixing the joint, the antennae do not unbend completely, the problem lies in the pliers themselves. When working with a professional device, you should focus on the grip strength of the handle. Heavy pushing is often caused by insufficient impact, so the attempt should simply be repeated (passing through the same holes).

Recommendations from experts

A cutter for connecting profiles is a fairly easy-to-use tool. But there are certain nuances here, knowing which you can not only extend the life of your purchase, but also make it much easier for you to work with it. The list of recommendations given by experts includes the following points:

immediately buy a set of replacement parts. This will save time on their purchase and subsequent replacement;
The weak point of the cutter is the rubber covers of the handle. They need to be replaced as they wear out;
when the springs come out, it is better to contact a specialist to prevent final breakdown;
do not skimp on your purchase, as repairing the product can cost much more than its original price. A good and expensive tool will last much longer than a cheap analogue;
It is better to choose models from trusted manufacturers. This way you will definitely buy something worthwhile;
Take care of the tool, replacing worn parts in a timely manner.

Following these recommendations will help you maintain the functionality of the divider for many years, enjoy your purchase and the results of its work. Knowing what to look for will make it easy to choose a profile cutter. Thanks to him, your repair will be high-quality, convenient and fast.