Should I make a window in a plastic window after installation?

Modern plastic windows are a completely ready-to-use product that does not need to be modified with a file to achieve convenience and practicality.

But, as is the case with many other things, windows are almost always sold in a minimal configuration. This means that they can and should be improved.

We will talk about the main methods of improvement (modernization) in this article. But let’s make a reservation right away: not all of them are definitely useful, but you can argue on this topic endlessly - any opinion will be subjective.

Installation of the supply valve

The supply valve allows you to solve the problem with the tightness of plastic windows. It automatically ventilates the room by letting in a small amount of air from the street and shutting it off in strong winds.

The valve is built directly into the metal-plastic profile. Expensive models have an external acoustic visor that minimizes noise penetration.

Inlet valve shown

The effectiveness of the valves goes to zero if the hood in the apartment is completely or partially clogged. Plus, there are many nuances, so you should install valves only after you understand the features of their functioning.

The cost of upgrading one window is from 1,500 to 7,000 rubles.

Window insert

Installing a window in a plastic window is no worse than using a supply valve.

A small window in the ventilation mode provides optimal air flow, which spreads at a height of 1.2-1.7 meters from the floor, which eliminates incredibly harmful and nasty “floor” drafts.

The insert of a vent into a plastic window is shown

To insert a window, one of the sashes is redone. This work can be ordered from many window companies, and they will do it quite quickly.

The price of inserting a window is from 3000 rubles.

Types and features of frame designs

There are many types of structures. They can be standard or made to order, depending on the window opening. But there are several main varieties:

Types and sizes of window frames.

  1. Blind window frames that cannot be opened. To allow natural light to penetrate, they are located, for example, along a blank wall along which the staircase to the 2nd floor is built.
  2. Openable. The number of moving sashes can vary from 1 to 3 or more, if the size of the window opening allows and the width of the sashes is not too narrow.
  3. Lifting and sliding. These windows differ in the way they open and are most often located in rooms with a certain interior to maintain style.
  4. Bindings with installation of a window. Moreover, there can be several vents and usually their number is determined by the number of window sashes.

It is the use of such an additional element of the window frame, such as a window, that provides a number of advantages:

  1. Through an open window, cold air entering a warm room does not rush to the ceiling, unlike a plastic window with a tilt-and-turn mechanism. Thanks to this, air flows in the room and there are no drafts.
  2. The window leaf does not affect the general properties of the window frame, but increases the strength and reliability of the window structure due to the presence of a spacer;
  3. The window has a much higher range of regulation of opening for ventilation, which means there is more opportunity to influence the flow of cold air into the room. That is, by slightly opening the window throughout the day, you can provide fresh air to the room during the night, when the body is especially susceptible to drafts. In this case, the temperature inside the room will not undergo any significant changes.

In addition, the placement and fastening of the window vent inside the window frame may vary. The cost of the window as a whole and its appearance will depend on how this fastening is done.

Scheme of a mortise window.

  1. Mortise. This model of window is part of a single frame of the window frame and therefore is adjusted as accurately as possible, avoiding gaps. This type of fastening is considered the most reliable.
  2. Split. The window is assembled separately from the window, and then, after cutting one of the sashes, it is simply inserted into the resulting space. The fastening of such a window is carried out using overhead external hinges.
  3. Sliding. This type of window is also made separately, but it is attached to specially prepared horizontal guides, which are cut into the sash. This is the most complex window design in terms of execution and fastening; it is done extremely rarely. The sliding window has a very unusual and attractive appearance.

When making your own window sash with a window, a split model is most often chosen. It is the easiest to execute and attach, especially if you don’t have too many skills in making a wooden window. After this skill has been developed, you can begin to manufacture more complex structures.

Ventilation limiter

The limiter connects the swing sash to the impost, preventing it from opening beyond a certain level (10-15 cm).

Read more here:

The improvement is also intended to protect children - they will not be able to open the sash all the way and climb out of the window. The air limiter will protect your pets.

By the way, there are two types of limiters - classic and with rigid fixation. In classic ones, the sash can move open 10-15 cm, but with rigid fixation it does not, so it does not hit the frame in strong winds. Thus, the option with rigid fixation is somewhat more practical and functional, but classic models, as a rule, are much stronger and more reliable.

Classic ventilation limiter

Hard ventilation limiter

The price of one limiter with installation is from 300 rubles.

Comb

A simpler and cheaper ventilation limiter. The design does not allow the doors to move around in strong winds, opening and closing randomly.

The main purpose of the comb is to regulate ventilation

The comb does not provide protection for children, but it allows you to regulate the intensity of ventilation, which is very convenient. The plastic models are weak, but they still work properly for several seasons.

The price of a comb with installation is from 300 rubles.

Hinged mosquito nets

Anti-mosquito nets with plastic or metal loops are convenient in apartments on the ground floors and in private houses. They open like swing doors and allow you to clear the window opening in just a couple of seconds.

Hinged maskit net shown

Cleaning windows with such screens is also a little more convenient. The only negative is that removing the nets for the winter is not so easy, although this procedure does not take more than a few minutes and only requires a screwdriver.

How to choose a size?

In order to order PVC windows with a window , you need to know the dimensions of the window opening. Typically, the sashes divide the window approximately in half, but this is not necessary. You can order a window, the upper part of which will be a window, and it can be equal in length to the opening. You can order a design with a small square window, it all depends on the wishes of the buyer.

8. Energy-saving double-glazed windows

Energy-saving double-glazed windows use special glass that blocks the outflow of heat from the room and takes maximum solar energy from the street.

Despite the skeptical reviews of many people, the effect of energy-saving double-glazed windows is present - the apartment will actually become warmer in winter.

Energy-saving double-glazed windows will make your apartment much warmer

On average, a single-chamber double-glazed window with energy-saving glass has similar thermal conductivity to a double-chamber one, but costs 20-30% less and weighs less. But you will have to sacrifice sound insulation; a special coating does not protect against noise, but the third glass does.

Therefore, it is worth installing energy-saving double-glazed windows only if it is necessary to make the glazing as light as possible, but warm (for example, on dilapidated balconies). In other cases, the benefits are rather dubious.

The price is 30-40% more expensive than the analogue with conventional glass.

Plastic window with a window - adjustment, price and reviews, how to remove?

Double-glazed windows have become a trend today; people are massively replacing old wooden windows with new ones.

And during operation, some inconveniences emerged. The ventilation mode is somewhat inconvenient in winter.

The room is greatly cooled, but the air does not have time to refresh the room.

A window with a small sash is ideal for ventilation. A healthy microclimate is created, heat remains in the room, and the flow of fresh air smoothly enters the apartment. You can safely leave the small sash on ventilation mode all night and not worry about hypothermia in your home.

If we talk about the components of a window with a small door, then they are the same as in a PVC double-glazed window. The structure in the opening consists of fittings, double-glazed windows and a plastic profile. Various types of decoration slightly transform a PVC window.

Application area

The first double-glazed windows that appeared on sales markets decorated only window openings. Over time, their scope has expanded, but for a long time they remained inaccessible to many, as a result of their high cost.

The window industry developed, competition appeared, and the introduction of new technology ultimately affected pricing. The scope of their application has expanded.

The bags began to be used in the glazing of loggias and balconies. A big advantage of their production is the installation and assembly of custom-made packages.

That is, you can glaze the opening of any size.

Based on this, small companies appeared on the market, which gave impetus to the wider use of PVC windows. Now they can be seen not only in window openings, but in mobile and stationary partitions, glazing of large areas, etc.

Advantages and disadvantages

Advantages of windows with vents:

  1. Cool air entering the room at the top of the window, meeting the flow of warm air, manages to heat up.
  2. There is no need to empty the window sill.
  3. The presence of an additional impost strengthens the structure.
  4. You can install it anywhere. For example, for cats they make a hole at the bottom.
  5. Reduces the ventilated area , so you can leave it overnight, which is convenient for cold regions.
  6. The opening mechanism is very simple and convenient.
  7. The location of the opening in the upper part makes it impossible for children or a cat to reach it.
  8. When cooking in the kitchen , use it freely.
  9. Eliminates the possibility of drafts.

Minuses:

  1. The presence of an additional structure leads to its rise in price.
  2. Additional imposts reduce light transmission into the room.

Kinds

  1. Mortise. The presence of a small door was initially included in the double-glazed window design.
    It is a separate sash with hinges and double-glazed windows. This is a very successful and reliable option, hence the inflated cost of products by a total of 30%. Just like the sash, the mortise opening has three modes: summer and winter ventilation, full opening.
  2. Split. Here the door cuts in when the glass unit is mounted in the opening.
    The sash is removed and the glass is cut to fit the door to the required size. The difficulty in such work is considered to be its adjustment and fastening so that it is perfect. The service life is significantly shortened compared to the first type of penetration.
  3. Sliding. The essence of this method is that during ventilation the internal sliding of the glass is used.
    They are located in special runners, due to which the glass moves a certain distance and returns to its original position. This option is considered the most modern, but there is a drawback in the vulnerability of the mechanism.

    It is not advisable to make such a design yourself; you should trust experienced specialists.

Criterias of choice

The double-glazed window is a key point when choosing a window.

The main characteristic of a plastic window is its glass unit. It is he who is responsible for the sound and heat insulation system and light transmission ability.

To choose it, it is worth considering some nuances:

  • type of home;
  • sash sizes;
  • space for the door (top, bottom);
  • number of storeys;
  • noise level;

It is worth paying attention to the choice of hole in the window.

This is how it happens:

  1. Folding , when the sash opens down, the handle rotates 180 degrees.
  2. Rotary , the handle is turned 90 degrees and the sash opens from left to right.
  3. With micro-ventilation , the handle is rotated 135 degrees and a small air flow is provided.
  4. Tilt and turn , combines all opening modes.

Price

Regardless of the functionality of a plastic window with a door, the price mainly depends on the manufacturer.

Today, the products are successful from ROTO, Siegenia Aubi, Rehau Blitz (Germany). Their product is characterized by high wear resistance and reliability.

What does it depend on:

  1. The company that produces the product.
  2. Product design without or with installation.
  3. Availability of additional decorative elements.
  4. Profile designs.
  5. Material of fittings, glass unit, profile.
  6. Seller's company.
  7. Number of cameras.
  8. Opening size.
  9. Difficulties in installation.

When ordering windows, you should pay attention to the final turnkey cost, which differs from the price of the package itself.

Examples of prices:

Removing/adjusting the window

To remove the small sash, you need to close it with the handle down. Then remove the top decorative trim on the hinge, and perform the same procedure with the bottom trim.

Alternately remove the pin from the upper and then the lower loop by pressing on its upper part. Hold the door and open the handle. We take it by the frame and lift it up. The sash will be removed.

Let's say the door leaf is slightly skewed; you can adjust it using a key (4 mm), which has six edges.

To raise or lower the door, remove the decorative trim from the bottom of the door. There is an adjustment groove in its upper part. If you need to raise the sash, turn the hex key to the right, lower it to the left.

If you need to adjust the upper part of the hole in the horizontal plane, then a hex wrench is also used here. To do this, you should open the small flap wide and find the element that needs to be adjusted. When you turn the key, the sash will move in both directions.

Reviews

  1. Gosha, Moscow. “My mother was given a window with a door that has discrete ventilation, which she is very pleased with.
    A bag without a hole could not be opened for a long time in the cold season, and it was necessary to remove flowers from the windowsill so as not to freeze. The only drawback is that we ordered it additionally.”
  2. Anonymous. “I saw the windows in the neighboring house, they look just crap, last century.”
  3. Mikhail, Voronezh. “We got an apartment from the developer with a window. We like it, it’s familiar.”
  4. #64997074.“We also received housing with a hole in the plastic window. It's terribly infuriating, you always have to reach for it to open it, and there's a blank glass underneath it. We experience inconvenience when washing it. There is much less light and an outdated look. We believe that such a window has only disadvantages.
  5. Alexander, Saratov. “A double-glazed window with a window is just great. I suffered for a long time from the stuffiness in the old apartment. Finally, I moved into a new living space, and immediately what I thought of was to install a plastic window with a window.
    Although the sellers dissuaded me, citing an additional fee for it. But my decision was firm, and I insisted on ordering a PVC window with a hole. The package was installed, and in the first minutes I did not regret my decision.

    When I open the window in winter, the heat is retained compared to the whole sash. I calmly leave it overnight, and in the morning I feel rested from the smooth flow of fresh air. If we talk about appearance, then it’s somehow familiar to me with a window. There is no need to install additional ventilators.”

0.00, (ratings: 0) Loading…

Source: https://househill.ru/otdelka/okna/plastikovye/plastikovoe-s-fortochkoj.html

Fan insert

You can embed a fan into the double-glazed windows on plastic windows, which will effectively ventilate the room in the summer heat and beyond. It can also be used as a hood in the kitchen or in a room where people smoke.

The fan ventilates the room well

It is important to choose a fan model that will be protected from mosquitoes and water by a special grill on the outside. Such a fan will not be cheap, as will its installation in a double-glazed window. Plus, there are a lot of nuances, so this topic needs to be studied in detail before damaging a double-glazed window.

Price including work – from 3000 rubles.

Let's summarize

We have listed the most common ways to modernize plastic windows.

There are doubts about the appropriateness of some of them, but you can safely install a handle with a lock, a ventilation limiter (or a comb) and mosquito nets on hinges. They are inexpensive, but at the same time they make using windows much more comfortable.

Plastic window with a window - price, reviews and how to remove the window

Plastic windows have been used for many years in the construction of houses, cottages and apartments. However, when installing them, the question often arises whether it is worth equipping plastic windows with vents or whether a single glass unit with a tilt-and-turn design is sufficient.

At first glance, it may seem that this design is a rudiment of old wooden frames, and it is not necessary to install it on completely sealed plastic double-glazed windows, but the advantages of using a window for ventilating the room are obvious, and its presence allows you to obtain the following advantages:

  1. If the plastic window installed in the kitchen is equipped with a window, then if smoke occurs during cooking, there is no need to open the entire sash; just open the window slightly and a small kitchen area will be ventilated in a few minutes.
  2. For those who set up greenhouses with indoor flowers in pots on their windowsills, such a window will also be much more convenient than models that are not equipped with this device. In this case, there is no need to remove vegetation from the windowsill while airing, eliminating the possibility of delicate plants freezing.
  3. If there are small children in the house, then the child will not be able to independently open the window , which is located at a considerable height. In addition, children suffer from colds much more often, and if drafts occur in winter, acute respiratory infections and other troubles will not take long to appear.

Window designs with vents

The vents with which plastic windows are equipped may differ in design and workmanship.

  1. The mortise design is a single unit with a double-glazed window and can be located either in the upper left third of the window or in the right part. Such a double-glazed window costs much more than its analogues, but its quality is an order of magnitude superior to them.
  2. The split design is installed on a ready-made sash and can be implemented in emergency cases, when there is a need to ventilate the room, and it is not possible to install double-glazed windows with a mortise design. Aesthetics and reliability in this case leave much to be desired.
  3. The sliding design is extremely rarely used for installation. Installation is carried out by inserting horizontal runners into the window sash, along which the window moves. This model is more often used in wooden double-glazed windows, but even in them the reliability of such a design is not always at a high level.

Installation

The most reliable option for equipping a plastic window with a window is made during the process of its creation. Thus, the mortise structure forms a single system with the frame, which allows the frame-window tandem to operate for many years without distortions or disruption of the geometry of the component parts.

If for some reason it is necessary to add a window to an existing double-glazed window installed in a window opening, and this must be done with the highest quality possible, then for this purpose the sash in which it is planned to be equipped with the device is carefully dismantled and a new sash with a window is made according to its standards.

This option is the most financially expensive, but the quality will not be inferior to the design, which initially had the possibility of such ventilation.

How to remove a window

If a window of a sliding or split design is used, then dismantling occurs in the reverse order of installation. In this case, it is enough to unscrew the screws with a screwdriver that hold this structure in the opening.

A window made in the window body, which is a single unit with the sash, cannot be dismantled separately; in this situation, it is necessary to remove the window sash.

Dismantling the sash occurs in the following sequence:

  1. The window opens in such a way that there is free access to the sash hinges.
  2. In the upper hinge, you must carefully remove the rotary shaft, while constantly holding the sash.
  3. After the shaft of the upper hinge is removed, the sash can be easily removed from the lower hinge.

Installation of the sash is carried out in the reverse order, and it is necessary to constantly hold the sash during this operation, and also securely fasten the rotary shaft of the upper hinge.

Adjustment

If problems arise in the operation of the window while the window is under warranty, fixing the problem yourself will void the warranty completely, so you need to call a specialist from the company whose workers installed the double-glazed window.

If the warranty period has expired, you can do the adjustments and repairs yourself.

Often a problem in the operation of the window arises due to its distortion.

It can be eliminated if you apply force in the upper direction to the lower corner of the window, in this case a slight bending of the fastening occurs and everything “falls” into place.

If the handle is jammed, then it is necessary to lubricate all moving parts of the locking mechanism with machine oil.

Cost of a plastic window with a vent

The cost of a window equipped with a window will be slightly higher, but you can pay for an additional level of microclimatic comfort.

There are a huge number of different companies on the market offering installation of double-glazed windows at a very attractive price, but this is most often done in order to “make happy” as many buyers as possible in a very short time and leave the market.

A high-quality metal-plastic window cannot be cheap.

Depending on the number of sashes with which the windows are equipped, the price may vary significantly.

  • A window measuring 1300 * 1300 mm with one window costs about 10,000 rubles.
  • If there is one sash, the price increases and amounts to 10,500 rubles.
  • Equipped with two doors will cost from 11,000 rubles.

Also, pricing is influenced by the number of double-glazed windows; the more there are, the higher the price.

Reviews

  1. Sergey, Moscow. We got a window with a window for free as part of a promotion in one of the building materials hypermarkets.
    We installed it in the kitchen and almost immediately it showed a significant advantage over the others in terms of ventilation. In general, we are happy with the purchase.
  2. Elena. Armavir. After the old wooden frames became completely unusable, there was no desire to repeat the experience of previous years with the presence of drafts and leaky windows, so the decision was made to completely replace the frames with modern plastic double-glazed windows. In order not to pay twice and thrice due to stinginess, they bought expensive ones. This tactic met all expectations, and the windows have been serving without complaints for more than five years. A blind window with a window was installed in the kitchen, which at first caused some concerns that the ventilation of this room would be insufficient, but all fears turned out to be in vain and the window copes with its function perfectly.
  3. Nikolai. Ryazan. Plastic windows are incomparably better than their wooden “ancestors,” but they also have their drawbacks. First of all, this is the cost, which can be very “biting” when replacing all the windows in a large, two-story house. Ideal tightness is an advantage of windows of this design, but it is also a disadvantage. The room needs to be ventilated much more often, so windows with a window will cope with this task much more effectively than solid double-glazed windows with a fully opening sash.

Blitz tips

  1. When installing double-glazed windows, you should choose only high-quality ones. It is better to order installation only from those companies that have been engaged in this type of business for more than one year.
  2. Immediately after installing the windows, carefully check the glass for defects in the form of microcracks or chips.
  3. Windows equipped with a window are a little more expensive, but it is better to install such a window right away than to subsequently re-equip the double-glazed window.

Source: https://orcmaster.com/remont/okna/s-fortochkoj.html

Rating
( 2 ratings, average 4.5 out of 5 )
Did you like the article? Share with friends:
For any suggestions regarding the site: [email protected]
Для любых предложений по сайту: [email protected]