Favorable price for repairs using Aquastop primer

Aquastop primer will protect the structure from moisture. The solution to this problem is relevant when insulating balconies or loggias. As a rule, loggias or balconies are glazed with expensive, high-quality structures that provide beautiful interior decoration using the best material, but all this is in vain, since condensation collects on the wall and glass.

The problem is the lack of proper hydro- and vapor barrier. To protect structures from moisture, you must use a special water-repellent material, such as Aquastop primer.

Primer for wet surfaces AQUASTOP

Related files

• Download technical specification (TDS)
• Leave a request for material selection
• Information for production

• Review
• Reviews (0)
• Characteristics

AQUASTOP primer for mineral surfaces with high humidity

primer is a one-component primer for external work on concrete , brick, plaster for painting surfaces with high humidity.
Protective primer for concrete AQUASTOP is used to strengthen and level old surfaces, to reduce absorbency and long-term protection of concrete (or any other mineral) surface from moisture and negative atmospheric influences.

Main characteristics:

• protective primer increases the adhesion of the finishing paint to any mineral surface;
• concrete primer AQUASTOP strengthens and levels old surfaces due to its high solids;
• primer for concrete AQUASTOP with high penetrating ability reduces the absorption of the coating material (paint for concrete , paint for plaster , etc.) and reduces paint consumption.

Water-based primer AQUASTOP is ideal for:

• painting plastered surfaces;
• painting brick surfaces;
• drywall painting;
• concrete painting.

AQUASTOP protective primer can be applied with a brush, roller or spray gun.

If you want to buy a primer for concrete and plaster wholesale or retail, call us at 8-800-1000-175 and our specialists will give you a free consultation on the technical characteristics of the products and the use of industrial paints and varnishes for painting concrete and plaster.

Features of using alkyd primer

The primer is universal, since it can be used to process not only metal, but also wood, plastic, and glass. The advantages of the alkyd mixture include:

• high anti-corrosion properties;
• strong adhesion of the finishing coating to the base;
• antiseptic protection;
• resistance to negative environmental influences.

How to use alkyd primer:

1. Before application, prepare the surface of the car. The body is cleaned of old paint and dust, damaged areas are cleaned, and traces of corrosion are removed.
2. Then the metal surface is degreased and coated with a primer using a brush, roller or spray can. The primer should first be mixed and, if the viscosity is insufficient, diluted with white spirit.
3. After drying, the layer is sanded and re-coated with a primer mixture.
4. After drying is completed, the finishing work on painting the car is performed.

Application of alkyd primer

You can use alkyd primer for further painting of a car together with synthetic and acrylic paints, nitro paint, and PVA glue. But in no case should you coat the base during its polymerization, as it may swell. It is advisable to apply paint using the “wet on wet” method, then the adhesion of the layers will be higher.

Primer Eskaro Aquastop Professional concentrate, 3 l

Primer Eskaro Aquastop Professional concentrate, 3 l

Description

Moisture-proofing primer-modifier, concentrate 1:10.

• Increases the moisture resistance of the surface.
• Strengthens the base.
• Evens out the absorbency of the surface, reducing the consumption of finishing materials.
• Increases the strength of the surface layer, improves the adhesion of finishing materials to the base.

When added to mortars:

• Alkali-resistant.
• Increases adhesion and plasticity of solutions during application.
• Priming occurs over the entire thickness of the base.
• Increases strength, abrasion resistance, moisture resistance of the base, resistance to fuels and lubricants.

Purpose

1.
Priming surfaces
made of concrete, aerated concrete, asbestos cement, plaster, putty, brickwork, plasterboard, chipboard, etc. before subsequent puttying, painting with water-dispersion paints, ceramic tile cladding, application of roll materials for interior work in rooms with normal and high humidity and outdoor work.
Suitable for preparing concrete floors before applying self-leveling mixtures. Suitable for processing fresh cementitious substrates! 2.
of cement-based mortars For interior and exterior use.

Types of surfaces for priming

Concrete, aerated concrete, asbestos cement, plaster, putty, brickwork, plasterboard, fiberboard, chipboard, concrete floors before applying self-leveling mixtures, fresh cement bases, etc.

Surface preparation

The surface to be treated must be dry, clean and durable. Before priming, clean the working surface from dust, chalk and lime whitewash, weak plaster and putty coatings, oil, bitumen and other contaminants. If the surface is damaged by fungus or mold, treat it with Eskaro Biotol E or Biotol Spray, following the recommendations on the label.

Application

After dilution, mix thoroughly. Apply by roller, brush, air or airless spray (nozzle 0.017–0.021”, pressure at least 110 bar) in 1-2 layers. Apply wet on wet to highly absorbent, porous surfaces at least 2 times. Carry out work at ambient and base temperatures from +5ºС to + 35ºС

Dilution
When priming:
Dust removal of cement floors: 1:2 Preparation of the base for the floor: 1:3-1:5 Priming for external work: 1:4-1:5. Priming before painting highly absorbent, porous surfaces: 1:5-1:6 Priming before painting surfaces with normal porosity: 1:6-1:8 Priming before gluing wallpaper and other roll materials: 1:8-1:10

To modify mortars, mix soil with mixing water in the following ratio:

For plasters - 1:5 - 1:20 For cement and lime mortars intended for application: 1-5mm thick - 1:5; thickness 5-20mm - 1:10

Attention!

It is possible to increase the viscosity of the resulting mortar mixture and lengthen the hardening time.

Tools

Brush, roller, air, airless spray.

Cleaning Tools

Immediately after use, rinse with water. Dried soil is cleaned mechanically.

Compound

Acrylic copolymer dispersion, functional additives, water.

Color

Light pink, transparent after drying.

Consumption

Consumption of diluted soil is 8 – 15 m²/l per layer. Consumption depends on the type and preparation of the surface, the degree of dilution and the method of application of the product.

Drying time

1-2 hours at a temperature of + 20°C and relative humidity 65%. As the temperature decreases or humidity increases, the drying time increases accordingly.

Precautionary measures

The soil is non-toxic, fire and explosion proof, and does not contain volatile organic solvents. Do not mix with other primers and organic solvents. Follow general occupational hygiene rules. Keep out of the reach of children. If soil gets into your eyes, rinse with plenty of water.

Disposal

Remains of dried soil must be disposed of as household waste; polymer containers must be collected for recycling or disposal as household waste.

Frost resistance

Attention! Frost-resistant products are those that have a date of manufacture indicated on the packaging.

Density

1 kg/l

Storage conditions

Store and transport in undamaged original packaging at temperatures from +5ºС to +35º. Protect from frost and direct sunlight.

Do not use without dilution! The high dry residue of undiluted concentrate primer creates a smooth “slippery” film on the surface, on which paint is poorly applied, the surface is painted unevenly with gaps.

Technical information

Our own, developing chain of supermarkets “Poryadok” and self-pickup points, cooperation with the best transport companies, control of order completion time - all this allows us to deliver goods anywhere in Russia in a short time!

You no longer need to remember passwords - access to your personal account is provided using a unique SMS code. No one will be able to find out your personal data or take advantage of bonuses or discounts on a discount card.

Loyalty card of the “Order” chain - discounts for regular customers, as well as prizes for product reviews. Receive discounts on goods in the online store and the retail chain “Order”!

In the online store "Order" prices are significantly lower than in retail stores. In addition, registered users regularly receive discount coupons and special offers.

This product does not have a single review, add a review and be the first!

Primer Aquastop concentrate

During construction work, as well as when insulating apartments and houses, craftsmen often create a layer of waterproofing. Protection from moisture is essential for premises for various purposes; thanks to it, moisture does not get inside the building. Nowadays there are many different building materials used for waterproofing. One of the popular and effective products that protect surfaces from moisture is aquastop primer. This article will discuss in detail the characteristics, advantages, applications and methods of applying this primer.

Basic properties

The primer is made by mixing several components:

• sludge, consisting mainly of cement and various chemical additives;
• setting dry powder;
• silicon compounds, which increase the insulation value;
• keys, which is a special substance made from high-strength rubber.

One of the main materials that make up aquastop is rubber, which prevents the penetration of water and moisture.

This primer is different in that it comes in two consistencies - a ready-to-use mixture, and as a concentrate. The finished mixture can be immediately applied to the surface, but the second type - concentrated primer - can be used only after mixing with water to the desired state. This feature of the concentrate should not cause concern; it will not lose its technical characteristics and properties when diluted with water. It is worth noting that the Aquastop primer concentrate, instead of regular latex, contains special components that have a high dispersion rate.

Main advantages

Today more and more people are buying Aquastop. The primer is popular not only in Russia, but also abroad, which is understandable. The main positive qualities of Aquastop waterproofing include the following:

• high level of water resistance and water resistance;
• convenient use;
• wide scope of application;
• protection of the surface from the action of salt and alkali;
• increasing the adhesion of the base and finishing material;
• reducing the level of surface porosity;
• reducing the consumption of paints used;
• equalization of absorbency;
• protection against absorption of glue into the surface during further pasting with decorative material.

Some of the line's materials contain a special substance - a biocide, which prevents the formation of mold and mildew under the outer coating. We also produce façade primer containing siloxane, a modifier primer that can be combined with mortar to increase its strength and ductility, and ready-to-use primer and mastic.

Aquastop concentrates are perfect for protecting loggias or balconies from moisture. They will ensure hygiene and reliability of structures, protect them not only from humidity, but also from liquid substances of various aggressive vapors.

Properties and features of using Aquastop primer

Aquastop brand primer perfectly fulfills its main function - protecting the surface from the harmful effects of moisture. For a balcony, waterproofing the main structures (layer of insulation on the floor, walls, parapet, ceiling) is the most important stage, since deterioration of the thermal insulation properties will lead to a change in the microclimate in this room.

1. Basic properties of the primer Area of ​​use
2. Specifications
3. Advantages

Overview of properties, areas of application

The effectiveness of any waterproofing material, be it a dowel, Perfecta primer or Aquastop, is noted only if certain compounds are used on suitable structures.

Where will they be used?

Aquastop brand primer is used on various types of surfaces: concrete, plaster coatings, aerated concrete and asbestos cement, putty, brick structures, chipboards, etc., as well as lightweight materials - plasterboard.

Waterproofing of this type is applied before the finishing coating: paints, tiles, various types of roll coatings. This is a universal material, unlike its dowel-type analogue.

Characteristics

The primer in question represents a group of deep-penetrating compounds that helps strengthen the structure being treated, and also makes its surface more even and smooth, which usually leads to a reduction in the consumption of the finishing coating.

Aquastop primer is intended for rooms with high humidity

Aquastop is characterized by waterproofing qualities, as well as resistance to alkaline solutions. If such soil is added to the building mixture, the adhesion of materials will improve.

Positive traits

The main advantages can be identified:

• Versatility;
• Excellent properties, which improves the performance characteristics of the structure;
• Simple application technology.

Comparison of some waterproof materials

Perfecta waterproofing mixture is a coating composition that is used indoors and outdoors. It can be used to cover facades, loggias, foundations, basements, plinths, etc. The properties of this material are similar to the Aquastop analogue.

But the Perfect mixture is resistant to both alkalis and salts. This is a leveling waterproofing material with a high degree of elasticity. It can withstand significant mechanical loads and waterproofing non-deformable bases.

But, for example, a key is a highly specialized product. This is a rubber profile that is used to seal seams and individual sections of reinforced concrete structures of objects for various purposes.

Another analogue is Hercules coating waterproofing mixture. Main characteristics: vapor permeability, resistance to corrosion, salts, oil products.

What is the best price?

The cost of the concentrated composition Aquastop varies from 300 to 3,000 rubles/piece. And the price is determined based on the volume (1-10 l) and type of soil, as well as its properties and consumption on the treated surface.

For comparison, the coating composition Hercules 25 kg and Perfecta 20 kg are in the same price category - 700 rubles / piece.

The difference is primarily in the mass of the mixtures. Hercules is susceptible to salts; this substance is not used on gypsum surfaces. This is an advantage of the Aquastop analogue, since it can be used together with different types of materials.

The dowel is offered at a low price (180 rubles/linear m), which is due to its narrow scope of application and specific waterproofing technology. Returning to the Aquastop primer, we should note its leveling ability, as well as its ability to increase the surface’s resistance to abrasion.

These features, among other positive qualities, distinguish this concentrated composition from a number of analogues.

Applying primer

Any protective material, be it a key, coating mixtures such as Hercules or Aquastop, requires surface preparation. Adhesion can be improved only if the structure being treated is thoroughly cleaned. If necessary, use a brush to remove all dirt and dust.

The procedure for waterproofing balconies using Aquastop

Before protecting premises from moisture, they must be properly prepared. First, you need to dismantle the floor covering and, if necessary, remove the supporting structure, such as joists or support beams. Then you should clean the concrete slab from debris and dust with a brush and remove paint from it so that it cannot interfere with the penetration of the waterproofing substance into the base.

If necessary, the stove must be repaired. It is necessary to seal the cracks and remove the crumbled area with a hammer drill. In a place where reinforcement is visible under the destroyed concrete, the concrete must be removed.

After this, you should work with gloves with a smooth surface. Aquastop does not need to be mixed with anything else before application; the primer is completely ready for use. It is necessary to take a small amount of the substance into your hand, then squeeze it lightly and quickly but carefully apply it to the defect area. It is important that the composition covers not only the hole, but also the areas around it. The hand can only be removed after 10 seconds, when Aquastop has hardened and bonded securely to the surface.

All damage should be treated in a similar manner. If the defect is large, then there is no need to try to repair it in one go. The hole in such cases is eliminated step by step, in small sections.

This method of eliminating defects has many advantages, they are listed above. Moreover, the price of this primer is pleasantly surprising. And coupled with economical consumption and durability, this material makes repairs truly profitable.

Water-repellent primer

Almost everyone has had to deal with the construction process in their life: it could be the construction of a new facility or a major renovation of a purchased residential property. Priming is an integral element of high-quality work; the brand of the chosen product will directly determine the further advancement of your labor-intensive activity and the preservation of the results of your work for many years.

This is especially true for rooms that are regularly exposed to high levels of humidity, such as the kitchen and bathroom. For a bathroom, a water-repellent primer is a vital necessity, indicated by special operating conditions. Aquastop primer, a review of which is presented below, has gained wide popularity among representatives of primer coating.

Purpose and application

Bathroom primer is a special emulsion for treating load-bearing and other building structures, preventing the destructive effects of water on interior decoration items.

The main objectives of the primer coating are to protect the finishing material from moisture and enhance the interaction of the surface with the base. There are two types of soil: adhesive and strengthening; both have waterproofing properties, but have different purposes in construction. The first is used indoors with high humidity, the second - for external finishing work.

The use of waterproofing primer applies to various types of products made from:

• concrete materials;
• metal;
• drywall;
• wood;
• plastic.

Composition and technical characteristics

When finishing walls, a primer will help protect the wall from the appearance of mold and the proliferation of harmful microorganisms. When choosing a primer, it is important to consider the quality of the base surface material.

Based on their composition, primers are divided into the following types:

1. acrylic - have received popular recognition due to their properties that allow them to be used on all types of surfaces, affordable pricing, as well as a wide variable range; the depth of its penetration into the walls reaches ten centimeters;
2. silicone - used for outdoor work, creating a waterproof barrier to the facade and providing reliable protection for external decorative items;
3. aluminum - the tasks of such a primer include protecting metal surfaces from the harmful effects of water and preventing the formation of corrosive manifestations on them;
4. epoxy – the main coating areas include metal and concrete; they guarantee long-term operation of the decorative coating due to high-quality adhesion and anti-corrosion properties.

The main technical characteristics of the primer for wet areas, such as loggias, facades, indoor pools, include:

1. soil density, expressed as the ratio of mass to volume (kg/dm);
2. temperature conditions for delivery, storage, operation (from zero to plus fifty);
3. consumption per square meter of covered area (from 0.1 to 0.2 l);
4. the time interval for complete drying varies between four and six hours, depending on the conditions.

The characteristics of Aquastop waterproofing have the following parameters:

• a concentrated white solution with a density of one kilogram per liter;
• the temperature during use should be in the range from ten to thirty-five degrees Celsius (the optimal figure is twenty degrees), during storage the container should be out of direct sunlight, the room temperature should not fall below zero to avoid freezing of the soil composition ;
• the approximate consumption of soil is determined by one liter per eight square meters;
• Complete drying time ranges from two to six hours.

Attention! The effect of the moisture-repellent properties of the coating appears twelve hours after application.

Consumption per 1 m2

Consumption is one of the most important parameters, which is determined by the quality of the surface being processed. Environmental factors (temperature, humidity) and soil composition have a direct impact on consumption indicators.

There are no clear prescribed standards; there are only approximate calculation figures that allow you to determine the expected consumption.

1. Insulating primer for concrete pavements will be wasted as follows: three hundred and fifty grams per square meter.
2. Structures made of plasterboard and wood will require one hundred and twenty grams of the composition per 1 sq.m.
3. The consumption of universal soils should be calculated as follows: from one hundred thirty to two hundred and fifty milliliters per square meter.

Important! The approximate consumption of soil is indicated by the manufacturer on the container containing the composition.

Features of bathroom primer

Bathroom primer has a number of distinctive features that determine its main purpose.

• It has antiseptic properties that prevent the occurrence of fungal infections of walls and the formation of mold.
• Effectively protects the structure from moisture.
• Provides maximum penetration depth of the solution.
• Accompanying additional surface strengthening.
• Once dry, it forms an invisible film coating.

The range of moisture barrier soils includes various brands of composition, including Aquastop Prof, which can be combined with mortar, Aquastop Bio - contains a special biocide substance that gives the soil fungicidal properties and suppresses the development of fungal infections.

Advantages and disadvantages

The advantages of the moisture-proofing primer Aquastop include the following indicators:

1. is available for sale both in the form of a concentrate and in diluted form;
2. ensures systematic leveling of the main surface, reducing its porosity;
3. priming helps reduce decorative consumables;
4. has an expanded area of ​​application for various types of base;
5. thanks to its light texture, easy to apply;
6. The waterproofing primer gives the main surface antistatic properties, expressed in repelling dust.

The disadvantages of the soil include:

• after activating the moisture-protective function, a number of waterproof primers create an additional layer of protection that does not allow steam to pass through, which significantly increases humidity levels;
• the cost of a Russian-made product with a volume of five liters will cost the consumer approximately five hundred to seven hundred rubles.

Attention! In order to prevent the formation of voids, craftsmen add strengthening soil to the mortar, which is based on cement.

Surface preparation

Before you begin applying insulating primer to the walls, it is necessary to carry out a number of measures that are of paramount importance to obtain the desired effect and maintain it for a long period of time.

1. Thoroughly clean the base from dirt, dust and other debris.
2. Remove any remaining putty or other material.
3. Eliminate fungal infections of the walls, if any.
4. We clean the surface with special sanding paper.
5. If necessary, remove cracks by plastering.
6. Let it dry, then go over the wall with sandpaper again.
7. Wipe away any remaining dust.
8. Now we take, dilute the Aquastop primer concentrate and apply it to the surface.

Favorable price for repairs using Aquastop primer

Aquastop primer will protect the structure from moisture.
The solution to this problem is relevant when insulating balconies or loggias. As a rule, loggias or balconies are glazed with expensive, high-quality structures that provide beautiful interior decoration using the best material, but all this is in vain, since condensation collects on the wall and glass. The problem is the lack of proper hydro- and vapor barrier. To protect structures from moisture, you must use a special water-repellent material, such as Aquastop primer.

Application of primer

Aquastop is a special material that is designed to produce hard water-repellent coatings on various substrates:

• brick;
• concrete;
• plastering;
• cement;
• aerated concrete;
• plaster;
• plasterboard and so on.

It is used when priming moisture-sensitive and porous surfaces. The Aquastop product line includes several types of water-dispersion primers, which are widely used in the construction industry.

Primer production was founded back in 1994. Currently, products of this kind are very popular in Latvia, the Scandinavian countries, Estonia, the Russian Federation, Belarus and Ukraine.

Aquastop waterproofing can be used for residential, office or industrial premises. The line includes products for external and internal use. They are suitable for priming kitchens, bathrooms, laundry rooms and other rooms with high humidity levels. Most often they are used to protect foundations, basements, facades, loggias, balconies, terraces, walls, floors, and indoor pools from moisture. Typically, waterproofing is performed before puttying, painting with water-dispersion enamels, wallpapering, or tiling.

The main characteristics of Aquastop waterproofing

The primer has a number of distinctive features. The principal feature of Aquastop waterproofing is the form of its release. The company produces both a ready-to-use primer and a concentrate primer. This material has a concentrated composition and is diluted with water to the required consistency before use.

Thus, Aquastop primer has economical packaging and you will not have to pay for excess water when purchasing. In addition, you will have the opportunity to independently determine the required degree of concentration of materials based on the absorbent characteristics of the base. Waterproofing can be diluted with water without fear of losing quality, because instead of the usual latex, a special dispersion substance is used for its production. It should be remembered that the concentrate primer is not used without prior dilution, otherwise a film will form on the surface, which will not allow the wall to “breathe”.

Substrates covered with a layer of Aquastop waterproofing are characterized by excellent water resistance, resistance to salt and alkali, and to significant mechanical load. The material is very simple and easy to use and lends itself well to subsequent processing. It is not without reason that the term “Aquastop” itself is a common noun and is often used to refer to any moisture-proofing material.

Main advantages

Today more and more people are buying Aquastop. The primer is popular not only in Russia, but also abroad, which is understandable. The main positive qualities of Aquastop waterproofing include the following:

• high level of water resistance and water resistance;
• convenient use;
• wide scope of application;
• protection of the surface from the action of salt and alkali;
• increasing the adhesion of the base and finishing material;
• reducing the level of surface porosity;
• reducing the consumption of paints used;
• equalization of absorbency;
• protection against absorption of glue into the surface during further pasting with decorative material.

Some of the line's materials contain a special substance - a biocide, which prevents the formation of mold and mildew under the outer coating. We also produce façade primer containing siloxane, a modifier primer that can be combined with mortar to increase its strength and ductility, and ready-to-use primer and mastic.

Aquastop concentrates are perfect for protecting loggias or balconies from moisture. They will ensure hygiene and reliability of structures, protect them not only from humidity, but also from liquid substances of various aggressive vapors.

Alkyd primer for metal for cars: rating of the best

The market offers a wide variety of soil mixtures, which is why buyers cannot make a choice. Considering that the car is constantly exposed to the negative influence of the external environment, it is necessary to ensure maximum adhesion of the primer to the paint. Having selected low-quality material, the car owner may encounter a problem - the coating will begin to swell and slide. To prevent this, a rating of the best soil mixtures that provide almost monolithic adhesion has been compiled:

• KUDO KU-200x;
• Tikkurila Otex;
• TEX GF-021;
• Belinka Base;
• KERRY KR-925.

The rating is based on the quality of materials, final properties tested in practice, as well as customer reviews.

Primer KUDO KU-200x alkyd universal (0.52 l)

Aerosol primer is intended for wooden and metal surfaces to prepare them for final painting. The primer mixture is suitable for any type of paintwork. It has high anti-corrosion properties, weather resistance, and excellent hiding power. Alkyd primer KUDO KU-200x is sold in cans, so it is very convenient to use for car parts. By spraying, the mixture penetrates into any hard-to-reach places.

Primer KUDO KU-200x alkyd

Primer Tikkurila Otex alkyd base AP white 0.9 l

The soil mixture has a thick consistency, so it must be diluted with a solvent. Alkyd primer dries quickly, making it widely used for coating windows, cars, tiles, and fiberglass. The Tikkurila Otex mixture adheres perfectly to surfaces painted with almost any type of paint. But the highest adhesion is achieved with water-based or alkyd-based paints.

Primer TEKS GF-021 universal gray 1 kg

The mixture is intended for priming metal surfaces. It is used before painting the car body with alkyd and oil enamels. Primer TEKS GF-021 protects metal from corrosion, is resistant to low and high temperatures (from -45 to +60 °C), and is weather-resistant. The disadvantage of the material is the drying speed, which is 24 hours. The manufacturer of alkyd primer for metal recommends using it at an air humidity of no more than 80%, at a temperature not higher than +5 °C. Failure to comply with application conditions will increase the drying time of the material.

Primer Belinka Base white 1 l

The soil material penetrates deeply into the wood structure. Belinka Base mixture is used to protect wooden surfaces from the effects of the external environment, fungi, and insect pests. The soil is mainly used for treating wooden houses and log houses. But the mixture is also in demand among car owners. With its help, wooden linings in the car interior are perfectly primed.

Primer KERRY KR-925 universal (0.52 l) black

Designed for metal and wood. It is advisable to use an alkyd primer for treating the body, car rims, individual sections of the car, and interior elements. Aerosol primer provides an even and smooth coating, so it is in demand among novice auto repairmen. The mixture has frost-resistant properties, protects the surface from corrosion, as well as the negative effects of the external environment.

Primer KERRY KR-925