Which lock is best for the front door - features of mechanisms and 10 best manufacturers

Every day, most of the population of our planet is faced with the need to unlock and lock the locks on the entrance doors of their houses, apartments, garages, offices, shops and many other premises. Limited access allows only those selected people who have the key to the installed lock to enjoy the privilege of entry. Human nature does not allow us to hope that some people will not have the desire to use other people's property, which is why locks were invented. The safety of property depends on their quality and reliability, so the choice of device should be approached very carefully. The key parameters that you need to pay attention to when choosing a lock are:

• If it is necessary to replace a faulty lock, when choosing, it is necessary to take into account the compliance of the landing dimensions, or the possibility of altering them without compromising the integrity of the door leaf;
• Door opening direction;
• Thickness, type (interior or entrance), material of manufacture (plastic, glass, wood or metal) and design feature of the door leaf (solid or hollow);
• The new lock has protection against burglary, additional “secrets”, etc. features that can resist interference by unauthorized persons in the design.
• Device cost.

The last factor is higher, the more levels of protection the lock has. The cost is also affected by the popularity of the brand, which is usually directly dependent on the quality of the mechanism and its safety characteristics.

Anti-hacking technologies

There is always a struggle between manufacturers and those who want to open the lock. Companies that produce locking devices and mechanisms analyze the weak points of their products and modernize the design where it is vulnerable. Of course, not a single lock can withstand a professional who needs to get inside at any cost, but you can complicate his task so much that he gives up because it will take too much time to open it, or it will not be possible to do it without noise that will attract unwanted attention.

Among the solutions used to protect locks:

1. Armored linings. Makes it difficult to drill out cylinder mechanisms.
2. Hardened pins in cylinders. They also make it difficult for the drill to work; when it hits a pin, the drill moves to the side, and the mechanism remains intact.
3. Reinforcement of the shank attachment point in structures with levers with armor plates;
4. Code lugs on levers;
5. Artificial weakening of the shank. If you try to use force, the mechanism is destroyed. The lock will have to be changed, but the protection served its purpose - it did not let the intruder onto the threshold.

The best rim door locks

Models of this type are easy to install and do not violate the integrity of the door leaf. They are often used as a measure of additional protection for the premises. They may have different locking mechanisms: wedge latch, safety bolt, etc.

H-Gang Sync TR811

5

★★★★★

editorial assessment

100%

buyers recommend this product

The main feature of the model is the built-in fingerprint scanner. Its use makes it possible to open the door by simply touching the lock. To install the mechanism, you need a drill and a screwdriver, which allows you to install it yourself.

The permissible operating temperature is in the range from -15 to +50 °C, the door width should be in the range of 30-75 mm. The device is equipped with a touch screen. The display is protected from damage and external influences by a layer of high-strength ABS plastic.

Advantages:

• quick installation;
• heat resistance;
• loud siren;
• economical energy consumption;
• automatic locking.

Flaws:

• high price.

H-Gang Sync TR811 is suitable for blocking the front door. A modern solution for ensuring the security of commercial premises.

Geryon Etalon-NRZ

4.9

★★★★★

editorial assessment

93%

buyers recommend this product

The body of the model is made of high-strength steel, which protects it from drilling and damage due to impacts. The deadbolt design consists of three cylindrical crossbars with a diameter of 16 mm. The latch provides additional protection. The package also includes a halyard handle and 5 keys.

Case thickness - 24 mm, key hole removal - 63.5 mm. The mechanism is resistant to clogging and continues to function after foreign objects get inside. The device supports more than 1.5 million secret combinations.

Advantages:

• durable body;
• reliable protection against burglary;
• durability;
• convenient installation;
• low price.

Flaws:

• large dimensions.

Geryon "Etalon-NRZ" is worth purchasing for outdoor use. A reliable solution for installation on garage or storage room doors.

Abloy RI010

4.8

★★★★★

editorial assessment

90%

buyers recommend this product

The deadbolt of this lock automatically latches when the door is closed. It can be locked inside the housing if it is necessary to freely enter the room. The body, socket and striker plate are made of steel and are resistant to impacts and extrusion.

The lock has a third security class and dimensions 100x65x30 mm. A red dot inside the keyhole informs the owner or visitor that the rotary knob is locked. The kit includes all necessary elements for installation.

Advantages:

• automatic locking;
• blocking indicator;
• convenient installation;
• rich equipment;
• small dimensions.

Flaws:

• instability to corrosion.

Abloy RI010 is designed to be used as an additional lock. An excellent choice for installation on warehouse or residential doors.

Gait LT 556 BN-R

4.7

★★★★★

editorial assessment

85%

buyers recommend this product

The cylinder mechanism of the secret is unlocked with an English-type key or a turntable. The body is made of steel, resistant to difficult operating conditions and not subject to corrosion. The lock is locked using a latch.

The dimensions of the mechanism are 86x77x25 mm, the key hole distance is 50 mm. For installation, the kit includes a cover plate and a striker plate. The deadbolt design is based on two cylindrical bolts with a diameter of 12 mm, extending to a distance of up to 22 mm.

Advantages:

• strength;
• mechanism locking;
• simple installation;
• low price.

Flaws:

• heavy.

Allure LT 556 BN-R can be used as an additional lock on the front door. Economical choice for installation on wooden panels up to 50 mm thick.

type of instalation

There are locks:

• mortise;
• loose-leaf;
• invoices;
• mounted

Mounted ones are not purchased for residential purposes. Invoices are rarely used due to the inconvenience of installation and lack of aesthetics. More often they choose mortise and inset locks. The mortise is located inside the door leaf, is attached to it, is not visible from the outside, and is closed at the end with a strip. Inset is a type of mortise. It is installed between two steel door leaves and is its element. Large-sized, designed specifically for heavy, durable structures, available with additional fastening. The downside is that if you are forced to change the lock, you will have to disassemble the door.

Important: the entrance to a house or apartment must be equipped with high-security mortise or inset locking mechanisms.

The best lever mortise locks

Such models are reliable and durable. They are used not only by private homeowners, but also by commercial organizations. The presence of more than 6 levers in the lock mechanism eliminates the possibility of breaking with a master key.

Class GS-SM-012

4.9

★★★★★

editorial assessment

96%

buyers recommend this product

The model has a system of protection against opening with master keys or a key selection method. When the mechanism is locked from the inside, it is locked, which guarantees the safety of people and property in the room. A safe-type double-bit key supports 1 billion combinations.

The center distance is 42 mm, the key hole removal is 66 mm. Other features of the castle include resistance to difficult climatic conditions: extreme temperatures and high humidity. All main structural elements are galvanized.

Advantages:

• burglary protection;
• durable body;
• locking mechanism from the inside;
• not subject to corrosion;
• low price.

Flaws:

• large dimensions.

Class GS-SM-012 is suitable for outdoor use - it can be embedded in garage doors or gates of a private house.

Elbor Granit 1.06.42

4.9

★★★★★

editorial assessment

94%

buyers recommend this product

A special feature of the model is the presence of reinforced cylindrical rods with a diameter of 18 mm. They are able to extend by 40 mm, reliably protecting the door from being knocked out. The lock is also protected from opening with the help of master keys, drilling and other types of hacking.

Elbor Granite is quite massive and has a safety class of 4. The body is made of high-strength metal and galvanized to protect against corrosion. The functional latch creates an additional level of security. Installation is simple and can be done without the involvement of a specialist.

Advantages:

• high strength;
• thick crossbars;
• burglary protection;
• simple installation;
• additional locking from the inside.

Flaws:

• heavy.

Elbor Granite 1.06.42 is designed for cutting into a door with a reinforced structure or even an armored one.

ProSam ZV 9-8/13 SP2.RF8-010

4.8

★★★★★

editorial assessment

88%

buyers recommend this product

The lock body is made of steel and is resistant to drilling, impacts and other damage. The zinc coating protects it from moisture, which ensures stable operation in difficult climatic conditions.

The center distance is 55 millimeters with overall dimensions of 81x108x19 mm. Reinforced crossbars with a diameter of 11.7 mm can extend up to 21 mm. The kit includes linings with halyard handles and a set of steel keys.

Advantages:

• durable body;
• burglary protection;
• extended equipment;
• convenient installation;
• low price.

Flaws:

• large keys.

ProSam ZV is suitable for installation in a door that opens in any direction. Whether it is interior or entrance does not matter.

Mettem ZV9 902.0.0

4.7

★★★★★

editorial assessment

86%

buyers recommend this product

The model has one direction of locking. Three nickel-plated steel bolts extend out of the mechanism up to 22 mm and reliably protect the door from being knocked out. The presence of a latch provides an additional level of security.

The center distance is 65 mm, the body dimensions are 130x82.5x16 mm. A steel faceplate is included for easier installation. The chrome coating protects it from the influence of the external environment.

Advantages:

• quick installation;
• durable body;
• rust resistance;
• low price.

Flaws:

• susceptible to clogging.

Mettem ZV9 corresponds to the second safety class. An economical choice for inserting into both interior and entrance doors.

READ ALSO

13 best metal entrance doors