Louvered shutters for wooden windows

Made in the romantic spirit of old Europe or having absorbed the juice of native customs, shutters and blinds will give a special thematic color to your home, you just have to correctly decide on the expected result! Your home will be protected from the scorching heat of the fierce summer sun, only rare modest rays of which penetrate inside, giving kind caresses - metal shutters not only protect your home, but also the comfort of its inhabitants, creating an optimal microclimate. You can close their doors when needed, protecting your home from the oppressive heat. They are also a guarantee of the integrity of your windows - even small stones will not pass through them. And the safety of your things and household belongings will be under reliable control if the windows are reliably protected.

Wooden blinds and shutters for windows: practical and beautiful

Wooden shutters are a new (or well-forgotten old) fashionable trend in window design. Their design harmoniously combines classic and modernity, and their decorative properties are complemented by protective ones. Therefore, it is not surprising that today, when interiors that include elements in a folk style have become very popular, interest in such a universal architectural detail as shutters has also increased.

Wooden shutters (ranch shutters) are one of the most original ways to give a room an exclusive and stylish look. Their use is relevant in cases where the task is to protect a room from rain, wind and heat, without preventing the penetration of street air and light into it. On the ground floors they can also replace grilles.

The photo shows internal wooden shutter blinds.

Ranch shutters are made from the same types of wood as wood windows and doors: oak, pine, larch. Finished products are treated with a special impregnation that protects them from moisture and rot and increases their service life.

The photo shows external wooden shutters.

They differ from ordinary shutters in that their shutters are not solid, but are made up of lamellas similar to those of blinds, installed at equal distances from each other and turned at an angle of 45 degrees to the plane of the window. But it’s only a stretch to call ranch shutters a type of blind, since the slats in them are fixedly fixed, and the luminous flux cannot be adjusted with their help.

Depending on the location of installation, louvered shutters are divided into two types:

1 External shutters, which are installed on windows from the outside.
2 Internal shutters, which are installed indoors.

External ranch shutters are used mainly in cottages and private homes, mainly on the first floors. Internal ones are suitable not only for houses, but also for apartments.

In terms of design, the following types of ranch shutters are popular:

Swing. A classic model, convenient for use on standard windows. The shutters consist of two leaves that swing open to the sides.
Harmonic. A modern model created for wide and panoramic windows. Shutters consist of three or more shutters, which are assembled like an accordion.

What it is?

Shutters are external enclosing structures that are installed on the façade of a building, where windows are located.
They are swing doors made of durable opaque materials on hinged hinges that open towards the street, followed by fixation on steel hinges fixed to the outer wall.

Roller shutters, or roller shutters, are enclosing structures that are made of steel or plastic horizontal plates connected by hinges.

The roller shutter canvas is wound onto a rotating shaft for opening and unwinds when the structure is lowered to block the window opening.

Is it possible to install them?

Shutters and roller shutters are always installed on windows or doors to prevent entry into the room from the outside. In some cases, installation of such structures is not possible for the following reasons:

The apartment building is part of a historic building and changes to the visual characteristics of the façade are prohibited by law.
If the design of the external walls or windows does not allow the installation of these structures, for example, when the windows open towards the street.
If the window is an emergency exit from the building, blocking it is prohibited.
If such a design does not allow the mandatory continuous technological process to be carried out in the room.

In a private home, or in free-standing retail pavilions, such structures can be installed without restrictions. In case of violation of the facade of a capital structure related to urban or village development, you will have to obtain permission from local authorities.

What are they for?

Roller shutters and shutters have different designs and mechanisms of action, but perform similar functions :

Prevent unauthorized entry into the premises by unauthorized persons.
The shutters can be closed from the inside, and the roller shutters can be activated from a remote control provided by the owner.
They protect the exploited space from negative environmental influences - strong winds during hurricanes, freezing rain, hail.
They exclude the penetration of direct sunlight into the room with subsequent physical wear and tear of the finishing elements, which is especially important if the room has not been used for a long time and the owner wants to keep it in its original condition.
When a room or apartment is located on the ground floor, roller shutters and shutters protect the personal space of residents from prying eyes.
If there is effective insulation in the body of the structure, shutters and roller shutters ensure an increase in the thermal and noise insulation properties of the property.
In case of fire, enclosing structures provide additional protection of translucent materials from destruction, which eliminates the flow of air to intensify the flame.

Every owner of the premises can do without these security elements, but the safety of the facility and its owner’s property will remain at risk.

Design

Ranch shutters are a type of window decoration made from wood, a completely natural, environmentally friendly material that never goes out of style. Among the interiors in which they will look appropriate, we can highlight the following styles:

Country
Eco style
Ethnic
Nautical
Mediterranean
Scandinavian
French
Loft
Shabby chic.

This non-standard window decor looks especially good in spacious rooms and studio apartments. This does not mean that louvered shutters are completely contraindicated for small rooms, but in order not to overload a small space with them, you will have to use your imagination.

For example, choose models with narrow slats or paint them in some color other than “wooden.” You can also install shutters on the floor, leaving the top of the window open. There are a lot of options.

The only thing you need to remember is that the slats that make up ranch shutters are always slightly open and cannot completely protect the room from views from the street. They are not combined with other types of curtains and are usually not used in rooms located on low ground floors.

Wooden shutters and blinds are considered evidence of refined taste and financial well-being, because in order to fit them correctly into the interior you need to have a sense of style, and they are not cheap. But if you still decide to decorate the windows in your home with them, the result may exceed your wildest expectations.

Installation rules and technology

Installation of roller shutters and shutters is carried out on the facade of the building or in the body of the opening. When installing finished products, you should prepare household electric and hand tools , and also study the algorithm for performing work in this category.

Roller shutters

Roller shutters are mounted to the lintel of the window, so that the upper part - the shaft with the protective box - does not cover the light opening. During installation the following steps are performed:

Marking the façade of the building at the site where the future structure will be installed.
Removing the protective casing from the finished product.
Marking locations for drilling holes for anchors.
Drilling fasteners.
Fixing the roller shutter bracket to the wall using reliable hardware.
Marking guide strips along the opening.
Arrangement of guides and limiters.
Installation of a remote belt drive from the inside of the room.
Checking the functionality of the roller shutter upon completion of installation.

If you have an electric motor, you need to connect a power cable line to the control panel. If several such structures are installed in a room, they should be combined into a group with the installation of one machine in the panel.

Regular and roller shutters

To attach ordinary wooden or metal shutters, a simple installation technology is also used:

Marking the outer side of the opening in such a way that the place of the vertical joint of the sashes after closing is strictly along the line of symmetry of the window.
Read also: Ventilation of premises: how to do it correctly, existing standards
Marking the location for drilling the wall for hinge mechanisms.
It follows that if the building material of the enclosing structure is weak, the best solution would be to install an angle steel layout along the opening on each side for reinforcement.
Installation of hinge mechanisms to the facade of the building.
Hanging the sashes on the pivot hinge rods.
Insertion of a lock in the area where the shutters join.
Devices for fixing hooks on the facade to hold the shutter leaves in the open position.

After installation, it is necessary to test the shutters in working position. The doors should close and open freely , the lock tongue should fit into the strike plate without effort.

Wooden shutters - design, production, installation

Modern methods of external design of window openings have taken the best that previous generations have created and combined them with modern technologies for processing and protecting wood. wooden shutters appeared - aesthetic, reliable and comfortable.

Not so long ago, the wealth of the owners was judged by the way the shutters were decorated. They were usually made from the same material as the window, leaving room for the creativity of wood carvers, and then painted white. Modern shutters rarely resemble wooden lace, but due to the fact that the impregnating materials leave the structure and natural grain of the wood visible, they are no less good.

The shutters can be made from the same wood as the windows, or you can choose a contrasting finish. Thanks to high-quality tinting, even pine blinds can be turned into a real design work that will make the facade of your home memorable and unique.

Typically, the shape of the shutter matches the shape of the window, and we can produce not only ordinary rectangular, but more complex arched or trapezoidal structures, and the sashes can be asymmetrical. Even the simplest shutters, the panels of which are assembled from vertical slats, look stylish and modern. Frame shutters, assembled like blinds, look more elegant.

The main function of the shutter is to protect the house from those who want to enter without the permission of the owners or throw a stone. Even ordinary type-setting wooden slats will cope with it perfectly, and special metal slats can strengthen the structure so much that the shutters can successfully resist burglary attempts. Forged decorative overlays will give the shutters a special charm and additional strength.

Related article: Service life of wooden windows according to GOST

Shutters can be manufactured with various opening and closing mechanisms. The most common are traditional swing doors, with one or two doors. Sliding shutters are ideal for large window openings. Depending on the design, the mounting method is selected - on slopes, to a wall or to a window frame.

Wooden shutters are quite heavy, so we use special fittings to install them. Professional installation guarantees no problems during operation, so our craftsmen perform this work especially carefully.

For any questions regarding the manufacture and installation of wooden shutters, please contact our managers.

Designs and types

Window shutters vary depending on the installation location, functionality, opening method and number of sashes, as well as design style.

Single leaf swing doors

They consist of an outer frame, which is fixed in the window opening, and one sash, hung on vertical hinges. Similar models are installed on small blocks. The locking system uses either an internal lock or safe analogues with the possibility of double-sided opening (from the inside and from the outside with a key).

Made from steel or wood. The most common places of use are in country houses or country houses, where anti-vandal protection is primarily important due to the prolonged absence of the owners.

Double-leaf swing doors

The most popular type of swing structures. It is a block of two, usually identical, doors that open symmetrically in different directions. Such designs, unlike single-leaf models, can be installed on wide windows, especially if metal is used as the material.

Sliding

Unlike previous options, the sashes here open not on hinges, but on guides located at the top and bottom of the window frame. This option is great for indoor installation, if you need to save space, or if the swing door has nowhere to open. There are also designs in which the displacement of the doors is carried out according to the principle of a sliding wardrobe.

Such shutters are often used on wide windows, but it should be taken into account that part of the translucent area will always be closed from external light.

Folding multi-leaf

Here, the opening can be realized either in a hinged way or exclusively in a folding way. In the first case, each of the doors is divided into two or more sections connected by canopies.

In the second, the sashes are folded on special accordion-type fittings. The latter option is especially popular in panoramic glazing, since it allows you to shade almost its entire perimeter, and when folded it takes up a minimum of space.

Indoor and outdoor

This feature characterizes the shutters according to their installation location:

External. They are mounted from the outside on the facade of the building, in accordance with the style of which the material and design are selected. Such structures must be weather-resistant and protect from uninvited visitors. For their manufacture, durable types of wood or metal are used.
Internal. They are located on the side of the room, taking into account the interior design. The main advantage, compared to external analogues, is the ability to close and open shutters without leaving the room.

Classic wooden shutters: types and advantages

The latest technologies: blinds and grilles have begun to push wooden shutters into the background. However, today, shutters are becoming more and more popular and at the same time they have radically changed their appearance. They have become more beautiful, high quality and functional.

Wooden shutters can vary greatly in appearance. They are decorated with all kinds of carvings, interesting ornaments, and painted. You can make shutters yourself.

Wooden shutters are becoming more and more in demand; they replace ordinary curtains and at the same time they perfectly protect the home from prying eyes, strong gusts of wind, cold and sun.

Types of wooden shutters:

Swing. There are two types: with one door and with two. The former are used for small windows, and the latter can be installed on wide or narrow openings.
Multi-leaf. This type of shutter has several leaves. These doors fold to form an accordion. This design only covers the window halfway.
Louvered.

Louvre-type shutters can be hinged or folding. Using a special mechanism, you can adjust these shutters yourself, making the room sunny or dark. Wooden shutters can be installed both outside and inside.

Advantages and disadvantages

Shutters and roller shutters are very popular among individuals and companies throughout Russia. Users of such window protection systems note a number of their undeniable advantages:

Protecting the premises from burglary.
Possibility of preserving an object for a long period without damaging the interior decoration from the sun.
Complete isolation of space from dust.
Masking the interior from prying eyes.

At the same time, such products have several subjective disadvantages:

The main disadvantage is that it affects the appearance of the facade, which is not always acceptable.
Darkening the space of the room, which interferes with insolation and also causes additional costs for artificial lighting.
During long-term operation, the mechanisms require maintenance.
If the element jams, you will not be able to open the roller shutters yourself.

Despite the minor disadvantages, many property owners often install security elements on their windows, and consumer demand for these products in our country is only growing.

Decorative wooden shutters: advantages

Wooden shutters and blinds are a completely new and certainly fashionable trend in window design. They are also commonly called ranch shutters. They combine classic and modernity, and along with decorative properties they also perform a protection function. Therefore, interest in them has grown greatly.

Wooden blinds are a decorative element in the interior that will transform and decorate, as well as protect you from the bright sun and intrusive glances. The charm of these shutters will perfectly complement the decor of your home.

Beautiful wooden shutters and blinds are usually made from the same type of wood as the windows themselves. Usually this is oak, larch or pine. This wood is of higher quality and practical. To increase the service life of these shutters, it is necessary to treat them with a protective impregnation - this will prevent the appearance of fungus and mold, and protect them from moisture and rotting.

Advantages of this type:

Comfortable;
Beautiful;
Practical;
Environmentally friendly.

This type of shutter is usually used in country houses, dachas, cottages, mainly on the first floors outside. But interior ranch shutters can look charming in the interior of an apartment. Made from natural wood, they not only serve as decoration, but are also not harmful to health.

Related article: Height from floor to window according to GOST

Wooden louvered shutters for protection

Basically, shutters are usually installed for decoration or protection from dust, heat and wind. If you decide to protect your home from uninvited guests, then you need to strengthen your shutters, make them more reliable and durable.

Wooden louvered shutters are a very unusual and interesting piece of decor. They can be used to decorate and protect your home, both outside and inside. They will look very stylish and impressive.

In order for your shutters to be durable, they need to be installed and attached to the windows correctly and correctly. The most important thing is to choose the right fittings for this. Canopies and locks must be made of durable steel and at the same time securely attached to the wall or window. You need to choose a lock very wisely so that it can serve you for quite a long time.

Types of locks for wooden shutters:

Mounted;
Overhead;
Internal lock with pulls.

The last type of lock is the most reliable; it is even used in car and armored doors, and is also installed on plastic windows. You also need to pay special attention to the shutter sashes. To prevent them from sagging or warping, they need to be strengthened with special metal corners. Then they will close tightly and well. The fittings can be decorated with a variety of forgings, then it will not only be durable and strong, but also beautiful.

Installation of metal shutters from the manufacturer.

Our production has been improving the production technology and design of louvered shutters for 12 years. Today we have managed to achieve in production an almost complete abandonment of profile pipes and overlaps of strips of various sections. Now all structural parts are made of sheet steel by repeated bending into various complex polygons. The undoubted advantage of this is the maximum possible concealment of all welds; the frame can be more massive. The doors can also have different thicknesses from 40 to 60 mm.

The slats on the sashes have a zigzag shape, that is, there are two fold lines along the entire length. With a relatively small thickness of metal, they are very rigid, do not play and do not deform. This way you can buy the highest quality metal louvered shutters of increased strength and at reasonable prices.

The design of shutters installed on the inside of windows is optimal for using them for decorative purposes - the interior, as if by magic, acquires the expressive features of an exquisite romantic style. By installing good protective metal shutters from the manufacturer, you lay an excellent foundation for creating an individual and specific interior - your guests will not help but be envious! Well, the evenings, warmed by the warm breath of home comfort, will give you good feelings!

Beautiful louvered shutters: do it yourself

The shape of shutters is very diverse. You can find such types of shutters as: arched, monolithic, frame, panel, rectangular, square, hinged, sliding and louvered. Louvered shutters are usually used as a beautiful decoration. They can be of different colors and sizes.

Louvered shutters are an excellent decorative element that do not require special care and they cope better than curtains with the scorching sun. They also perfectly retain heat in the house.

These lattice shutters can be purchased at a store or made by yourself. To make our own, we will need different materials and tools. Especially: saw, drill, screwdriver, axe, tape measure, plane and level. It is also worth purchasing ordinary wooden blinds so that you don’t have to make them yourself, as this is a very labor-intensive and complex job. Before you start constructing shutters, you need to treat wooden products with an antiseptic and drying oil. It serves as a water repellent.

Progress:

We begin work by making a wooden frame. It consists of two crossbars, 4–6 cm in size, and jibs. The frame must match the size of the window.
Then we adjust the finished wooden blinds to the size of the frame. We measure and cut to the required size.
We attach the blinds to the frame. To do this, drill two holes at the top of the inside of the frame. And then we thread a strong thread through them and fasten the blinds.
We install a special mechanism that controls the blinds.
Checking the operation of the blinds.
We attach the shutters to the window with level awnings.

Once the work is completed, the shutters can be decorated as you wish. You can paint the shutters or cut out various patterns and carvings. Then they will turn out more beautiful and unique, to the envy of the neighbors.