Making and installing a window in a bathhouse with your own hands

Bath window structures can be made from various materials and in different sizes.
The thermal resistance of the bathhouse, how quickly it will heat up and retain internal heat will directly depend on the correctly selected characteristics of the window.

In addition to high thermal characteristics, the window must be aesthetically pleasing and fit well into the external and internal appearance of the building.

Further in the article you will learn all the details about how to make a window in a bathhouse - what and what size it is made of, at what height it should be located, and also how to install it correctly.

Window installation

You can install plastic windows in a bathhouse yourself.
The main thing is to take into account the type of structure, stock up on the necessary materials and tools, and follow the step-by-step guide. In the dressing room, PVC windows can be installed in any configuration and size

Timber or log house

In this case, problems may arise with the installation of plastic windows. The fact is that wood quickly absorbs moisture and releases it. This leads to changes in the size of the openings, which complicates the installation of the structure. To avoid problems with the installation of products, adhere to the following algorithm:

1. Perform casing of the openings.

This is an independent frame designed to hold the window unit. It is mounted in the wall using special grooves. This frame prevents damage to the product during shrinkage of the structure. To perform casing, proceed as follows:

• a groove is formed on the sides of the opening, which is cleaned, dusted, and treated with an antiseptic solution;
• cut out a block of appropriate size;
• the hole is insulated;
• fix the block;
• fasten the casing frame struts;
• install upper and lower lintels, and fill the space between them and the wall with heat-insulating material.

The casing is ready.

2. Mount the window frame in the usual way. The gaps between the structure and the casing are filled with polyurethane foam.

3. Finish the slopes.

Building made of brick or cellular concrete

To install plastic windows in a bathhouse made of brick or cellular concrete, casing is not required. The procedure in these cases will be as follows:

1. Determining the location of the openings. This is done before the construction of the bathhouse begins at the project execution stage.
2. Frame installation. They install only the box without glass. It is fixed using wooden spacers.
3. Glass installation. They are fixed to the frame with anchors.
4. Filling the space between the structure and walls with polyurethane foam. After the material hardens, the protruding parts are cut off with a construction knife.
5. Finish the slopes.

Plastic windows in the bathhouse are comfortable, durable designs. They can be installed in a steam room, but under certain conditions. The products are suitable for use in the washing department and dressing room. The structures can be installed independently. The main thing is to know how to do it correctly.

Can I install it myself?

You can only make a window into a bathhouse yourself from wood. Other types of windows, for example, from PVC, are manufactured using a factory method and can only be installed independently.

Note! PVC windows are allowed for installation only in certain rooms: the rest room, dressing room and shower room. Wooden windows can be installed in all bath rooms without exception.

Advantages of wooden windows for installation in a bathhouse:

• 
  resistance to high temperatures;

• high strength and preservation of appearance in a hot temperature environment over a long period;
• environmental Safety;
• high maintainability;
• high aesthetics.

Disadvantages include high susceptibility to biological contamination and high flammability.

What materials will be needed?

The best wood for bath structures is oak . It is also permissible to use birch and linden. Coniferous lumber is not allowed to be used in the construction of a bathhouse, since at high temperatures they are capable of releasing resin.

To make your own wooden window for a bathhouse, you will need the following materials:

• wooden glazing beads for strengthening glass, 10 mm;
• glass sheet 4 mm thick;
• oak board 125×50 mm for making a window frame;
• oak timber 60×50 mm for the manufacture of window sashes;
• rotary handle - 1 pc.;
• window hinges - 2 pcs.;
• self-tapping screws for assembling elements;
• PVA for gluing elements.

How to do it correctly?

Before starting work on the manufacture of a wooden window, prepare its drawing and cut the blanks taking into account allowances. For identical parts, for example, bars for sashes, a common blank is made. All parts are treated with antiseptics , and then the fragments are cut to the required size.

Instructions for making a window for a steam room step by step:

1. 
   After preparing the necessary parts, they begin to process the tenons and grooves; for this, a hand-held milling tool is used.

2. On a circular machine, longitudinal grooves are made, horizontally and vertically at 90 degrees.
3. Finishing of the protrusions is carried out using a manual milling cutter.
4. Milling a groove for glass is carried out without changing the cutter, alternately on all workpieces.
5. A test assembly of the frame and sashes is performed, during which the accuracy of the parts is checked and, if necessary, structural fragments are adjusted.
6. After the preliminary assembly has been completed satisfactorily, you can glue the parts together using PVA, covering all the corners of the frame and sash.
7. Clamp the glued elements with self-tapping screws.
8. Handles and hinges are attached to the doors.
9. Glazing is carried out.
10. Start installing the window unit.

Required Tools

The set of tools for installing windows will depend on the material of the window and the walls of the bathhouse. If you plan to install wooden windows, you will need the following tools:

• circular saw;
• manual router with a set of cutters;
• electric plane;
• screwdriver;
• wood hacksaw;
• measuring instruments: tape measure, ruler, corner and level;
• chisels;
• mallet and hammer;
• rasp and sandpaper.

Installation of wooden windows in a log house and a timber bathhouse

Installing windows in a wooden bathhouse has its own characteristics, due to the fact that the log house or timber shrinks very much. In the first year of operation, a wooden bathhouse with a height of 3 m settles on average by 3-5 cm. Later it continues to settle for another 5-6 years; moreover, it “lives its own life” throughout the entire period of operation, shrinking and swelling, constantly deforming. Therefore, if you install the window frame close to the opening, then over time the wooden crowns will begin to put pressure on it. And this often leads to the destruction of the frame and glass.

To avoid this, the frame of a wooden window in a wooden bathhouse is mounted on a casing (jam). This is a kind of additional box that will “take on” the weight of the settling log house. The stages of installing wooden windows using frames are as follows:

Stage 1 - Opening measurements

The opening for a window with a frame, naturally, should be larger than when installing a window in a brick or concrete bath, where a frame is not provided. Usually the casing is made from 100x150 mm bars and this size must be taken into account when calculating the window size. The gaps (later they are filled with insulation) between the opening and the casing on the sides are usually 20 mm, on top - at least 70 mm.

Stage 2 - Fastening the casing

There are two ways to fasten the casing in the opening of a wooden bath:

Fastening using an embedded block

In this case, grooves are made in the window opening on the sides. Thermal insulating material is first laid in these grooves, and then the bars are installed. After this, the side walls of the casing are attached to the bars using self-tapping screws or nails.

Fastening with a spike

Tenons are cut out on the side of the window opening, and grooves are cut out on the side posts of the casing. When using this method, the frame is put on the opening as part of the construction set, and, if necessary, can be easily disassembled.

Stage 3 - Window installation

A wooden window is attached only to the frame; the easiest way to do this is with self-tapping screws. If you do not want to drill the box, you can use anchor plates for fastening.

How to carry out the work

All work on creating a wooden window can be divided into the following stages:

• After clearly measuring the dimensions of the window openings, you need to cut the wooden beam. In this case, it is necessary to clearly measure the indicators and not forget that at the ends of each resulting part there must be an acute angle with a perfectly smooth edge.
• Then make recesses for the glass on the resulting bars, this is done with an electric plane.
• Having glued the bars and received ready-made frames, you need to insert glass into them and secure them with glazing beads.
• After this, you need to install the fittings and hang the frames in the window openings; for this you will also need a chisel and self-tapping screws.
• After the glass frames are installed, they will need to be carefully coated with water-based varnish.

When creating windows in a bathhouse, you should take the dimensions very accurately.
These are all the stages of creating windows in a bathhouse, there is nothing complicated or scary about it, you just need to use a metal corner ruler so that all the corners are perfectly even.

Bath windows

In a bathhouse, the windows should look like horizontally elongated rectangles, since it is this shape that allows for the best retention of heat in the room. Windows can be located both in walls and in doors. Depending on the opening method, the window may have a different area.

As a rule, its area is from 5% to 7% of the floor area of ​​the room. The window should be positioned in such a way that you can look out of it while lying down, sitting in the steam room, or standing in the washing room.

Regardless of whether the windows have double or single frames, they must have double sealed glazing (if the frame is single, then the glass is attached to both sides). Of course, making a window in such a window will be quite problematic, but it will greatly facilitate the process of ventilating the bathhouse.

If your bathhouse is built of brick, then the windows in it can be made of glass blocks. Thanks to them, soft diffused lighting will be created. In addition, such windows do not require curtains, and they are more durable and hygienic than conventional windows.

Features of installing a window in a steam room

Rules for equipping a window opening in a steam room

In the process, you should adhere to the following procedure:

• We mark the window opening using a laser level or plumb line. Please note that the builder's level is not accurate enough for this process.
• We cut a hole so that the bottom side falls in the middle of the log for the window sill equipment. For these purposes, you can use a hand chain saw or circular saw.
• We form a spike with a cross section of 5 cm on the side surfaces.
• We make markings and cut 5 cm deep, and then two more such cuts five centimeters from the edges of each side.
• We treat the opening with a protective antiseptic in two layers.
• After drying, we stuff the jute tape using a construction stapler.

Please note that the heat insulator must be fixed as tightly as possible in the tenon, since timber is supposed to be installed in it.

Technology for installing casing for a window in a steam room

We carry out the work in this order:

1. We prepare a beam with a section of 10x10 cm, a height 2-3 cm less than the opening.
2. On one side of each part we make longitudinal markings, marking a recess 5 cm wide and 4-4.2 cm deep.
3. We remove the middle between the cuts, forming a kind of groove.
4. We trim the edges with a chisel and a chisel or hammer.
5. We treat the surface with an antiseptic.
6. We place the resulting casing parts on the tenon in the opening. If necessary, tap the structure with a hammer.
7. We attach a thick board to the top of the sides, which will serve as a kind of support for fixing the upper part of the window frame.
8. At the bottom we fix the board that forms the basis for the window sill equipment.

Making bath doors from fiberglass sheets and one frame

For a washing room where temperatures are not high, a steam- and moisture-resistant and warm door can be made from 2 fiberglass sheets and one frame. The sheets are attached with screws to the frame on both sides. The cavity between the sheets can be filled:

• bituminized mineral wool,
• polystyrene foam,
• polystyrene foam.

In order to ensure tight closure, door locks are made from the bottom and top from the inside. Bottom lock - this can be a regular metal hook. But the upper lock cannot be made of metal, since the temperatures at the top can reach high levels and you can burn your hand on the heated metal.

Here you can only make a wooden bolt or bolt. It is not recommended to install any latches or English locks on the doors, because... there is a risk of accidental locking.

Handles on bath doors should also be made of wood, treated with protective impregnations.

Plastic or wooden

So, the decision has been made - to build a bathhouse with windows. And here again is the dilemma - which windows and doors for a bathhouse are better: made of wood or newfangled ones made of plastic? And how do some differ from others during operation?

Since baths appeared a very, very long time ago, naturally, there could be no talk of any plastic then. Everything was made of wood. And over the centuries-old history of baths, it was decided which tree species are best suited.

Basically, oak, aspen, linden, and larch were used for windows. And they made everything either from the same breed or combined them. Naturally, this was a completely environmentally friendly option. And what a wonderful smell it was! But it is not recommended to make windows from pine, because when it is heated, resin is released.

But wooden windows also have their drawbacks. Due to temperature changes and high humidity, they dried out (or, on the contrary, swelled), causing distortions to appear.

Wooden windows for a bathhouse must be treated every year with special compounds and impregnations to prevent rot and mold. Moreover, they harbor various insect pests, resulting in a short service life.

And in order to extend this period, all modern manufacturers process the wood so that its moisture level does not exceed 12%. Only in this case will it be able to serve for more than a dozen years.

But time moves forward, progress does not stand still, and now plastic windows have appeared. Their main distinguishing features are:

1. Longer service life, unlike wooden ones;
2. Resistance to sudden temperature changes;
3. They are not afraid of high humidity.

But, like wooden windows, plastic ones are also not without their drawbacks:

1. They don't "breathe";
2. When heated, harmful fumes are released, the cheaper the material, the more harmful and more of these same fumes;
3. Even with a slight mechanical impact, deformation, cracks, etc. may appear. which are not so easy to fix, unlike wooden ones;
4. If low-quality material was used, the plastic window may become deformed due to high temperature.

Constructions

And we will start with the design of windows. This is the most important part, once you understand it you will be able to make meaningful choices.

Twin frame with double glass

This design has been familiar to all of us since Soviet times. Two frames with single glasses are connected into a single unit, which opens simultaneously. But at the same time, the frames can be opened independently, if released from the fixation - this is necessary for washing windows. Note that there were also options where there was no possibility of independent opening, because the frames were bolted together.

The appearance of this design was a progress compared to single frames, because an air gap was created between the two glasses, which significantly reduced heat loss. However, it was not possible to achieve tightness - the designers left a large tolerance. In winter we had to seal the windows with paper tapes to eliminate drafts due to the cracks in them.

Today there is no need to install such windows either at home or in the bathhouse. Unless they turn out to be extremely cheap. But this is also unlikely, because manufacturers have already switched to new technologies, and twin frames with single glasses are no longer produced (well, maybe someone somewhere else is making them using old equipment).

CONCLUSION! We believe that the high heat loss of Soviet-style window frames makes them unsuitable for baths.

With double glazing

But wooden windows with double-glazed windows are more than appropriate for a bathhouse. They are exactly worth installing. But first, some background.

The Soviet window block described above is the forerunner of double-glazed windows. Design engineers improved it by achieving tightness. Two glasses, separated by a spacer frame at a distance of 1.4 cm or more, form a closed loop, sealed with sealant.

An isolated gas layer is created between the glasses, so later options arose where ordinary air is either replaced with an inert gas, or a vacuum is created there. Both options reduce heat transfer and increase sound insulation.

The revolution in the window industry was the appearance of plastic windows. Polyvinyl chloride replaced wood. Everyone was happy - both producers and consumers. We will not delve into this topic, we will only say that PVC ultimately had a lot of shortcomings, so the double-glazed window survived, and wood again became the frame material.

The wooden profile is not hollow, like plastic, but is made of solid wood. But its shape is the same as that of plastic. It also allows you to install single- and multi-chamber double-glazed windows, and you know that with an increase in the number of chambers (= gas or vacuum layers between the glasses), thermal protection and sound insulation increases. (At the same time, the price is also rising).

ADVICE! When choosing the number of packages, focus on the area in which you live - look at how many packages are usually placed in houses in order to comfortably survive the winter.

Before moving on to the next type, let's clarify one thing: regardless of the number of double-glazed windows, they are all installed in one frame. But it is not necessary that there is only one frame.

Double frames

If the walls are thick enough, the opportunity arises for another engineering move: installing two independent frames in the opening, that is, opening on their own. At the same time, a distance is also created between them - another gas gap, but not sealed. Windows for a wooden bath can be like this too.

ON A NOTE! In each of these double frames, you can install either a single glass or a double-glazed window, and the double-glazed window itself can be either single-chamber or double-glazed.

In practice, double structures are often found with a single glass inserted into the inner (facing the room) frame, and a single-chamber package in the outer one. If increased thermal insulation is required, the interior can also be with double-glazed windows.

The main disadvantage of this option is its cost. Although for a steam room somewhere in Siberia - just right. In addition, double frames are good for combating condensation.

Installation of wooden windows in a brick (concrete) bathhouse

Stage 1 - Opening measurements

The first step to installing new wooden bathhouse windows should be to measure the existing opening, cleared of debris and plaster residues. The goal is to determine its configuration and dimensions of the new window. The difficulty of measuring is that any building settles a little over time and the opening is never absolutely perfect. This is not scary; minor distortions will be compensated for by a correctly positioned wooden window frame.

So, measurements are made using a laser tape measure, a building level or a plumb line. It is advisable to mark two verticals and two horizontals - on opposite sides of the opening, so that when installing the window you can focus on the smaller number.

Installation of wooden windows in accordance with GOST requires that the following gaps be maintained between the opening and the window frame: at least 1-2 cm on the sides and top, 5-6 cm on the bottom.

Stage 2 - Window Installation

Installing a wooden window in a brick or concrete bath can be done in three ways:

• using mounting blocks
• on dowels (through installation)
• on the anchor

Option 1 - Using mounting blocks

This method is suitable for installing windows in the washing compartment of a bathhouse, as it involves the use of polyurethane foam and silicones, which are unacceptable for a steam room.

Mounting blocks are pieces of boards or slats with a thickness equal to the provided gap between the opening and the frame. First, install the support pads, and then, using a level, install the spacer pads. After the frame is leveled, the pads, starting with the spacers, begin to be taken out one at a time and construction silicone is poured in their place - on the wall and on the frame. After this, the pads are returned back, securing them with silicone, like glue. The pads glued in this way, along with the gaps, are blown with foam. The frozen sagging foam is cut off, if necessary, a window sill is installed and slopes are made.

Installing windows using mounting blocks

Option 2 – Installing wooden bath windows on dowels

This option is much more versatile and suitable for any sauna room, including a steam room. In addition, installation using dowels will combine the windows with the bathhouse into a single structure, and even a hurricane will not be able to tear the tightly fastened frame out of the opening.

To begin with, holes for fasteners are drilled in a wooden frame so that the outermost ones are at a distance of 150-200 mm from the corners, and the others are located evenly along the length between the outermost ones. In any case, this step should not exceed 600 mm.

The length of the dowels used for fastening is calculated by the formula L = gap width + frame thickness + 80 mm. For example, if the frame thickness is 50 mm, the gap width is 20 mm, then the length of the dowels should be 150 mm.

The frame is installed in the opening and leveled using mounting blocks and a level. Through the holes in the frames on the walls, mark the places where holes for the dowel sleeves will be drilled. After this, the frame is set aside and holes are drilled in the walls with a depth equal to the length of the sleeve + 30 mm. Next, the dowels are driven into the resulting holes, the frame is re-aligned and nails are inserted into the sleeves. Then the pads can be removed and the gaps can be filled with any materials suitable for the bath. It is better to give preference to flax fiber, jute, moss, that is, natural materials of natural origin.

Installation of wooden windows with dowels

Option 3 – Installing wooden bath windows on anchors

Not a bad method, which is the only correct one for a very skewed opening with incorrect dimensions. Anchors are special metal plates with mounting holes that are fixed to a wooden frame according to the same principle as the holes for dowels were made in the previous version. The anchors are secured at the ends with self-tapping screws to the frame so that they point inward. In the future they will be hidden behind the slopes. The frame with anchors is installed in the opening and leveled using mounting blocks. Then, through the holes of the anchor plates on the walls, the drilling sites are marked and the anchors are secured using dowels. After this, the pads are removed, the cracks are filled with insulation, a window sill is installed, and slopes are made.

Installing windows with metal anchor plates

Efficient ventilation

An important stage in arranging a steam room is ventilation. In its absence, prolonged stay in the steam room becomes unsafe for human health. And improper installation of air ducts can lead to heat loss and unnecessary fuel costs for proper heating of the room.

You should not make a hole for the ventilation duct directly on the ceiling of the steam room. This will lead to large heat losses, and hence a decrease in the effectiveness of bath procedures.

You should not make a hole for the ventilation duct directly on the ceiling of the steam room

The most common are several options for the location of ventilation ducts in the steam room.

During the actual bathing procedures, the ventilation holes in the walls can be closed with valves. And then open them as needed.

Ventilation grille with valve

Galvanized or stainless steel pipes should be used as ventilation ducts. It is not recommended to use plastic structures in the steam room. The pipes must be secured using special clamps.

Having decided on the ventilation scheme, you should make holes of the required size in the walls or floor.

Holes

Their diameter depends on the area of ​​the ventilated room, but it cannot be less than 100 mm. Then you need to insert ventilation ducts into them.

The ventilation duct is inserted into the hole

The remaining distance between the wall and the pipe must be filled with non-combustible insulation. Attach a protective grille on the street side.

The arrow indicates the protective grille

Is it possible to install PVC windows?

PVC windows are gaining popularity. However, before equipping a steam room, you need to consider the pros and cons.

Advantages:

• affordable price;
• easy installation;
• wide range of shapes, fittings, design sizes.

Flaws:

• the likelihood of a draft if the mechanisms are not adjusted;
• risk of plastic cracking due to high temperature in the steam room;

Construction in the bathhouse

evaporation of harmful substances, adverse health effects.

Installation of plastic windows in the steam room

Plastic, when exposed to high temperatures, releases harmful substances. The structure will not last long due to pressure changes. It is better to refrain from installing PVC windows in the steam room.

Installation of plastic windows in other rooms of the bathhouse

In the hottest part of the bathhouse, it is not recommended to install PVC; in other rooms, for example, in the dressing room, shower room, the products can be installed.

You need to think about the need to install windows in the rooms; ventilation is usually sufficient. In the recreation room, PVC frames with window blocks will not be superfluous.

Average prices

The cost of installing windows in a bathhouse depends on the wall material and the window model: regular wood, wooden Euro-window or PVC window. The most expensive and highly durable are wooden euro windows , the cost of which also differs from the selected wood. Additionally, the final price is influenced by the selected type of installation, casing, foam, type of insulation and fasteners.

Average prices for installing different types of windows in a bathhouse per 1 m2:

• 
  larch, window cost - 10,500 rubles, installation - 4,800 rubles;

• oak, euro - 13,000 rubles, installation - 5,200 rubles;
• meranti, euro - 29,000 rubles, installation - 6,600 rubles;
• alder, euro - 16,000 rubles, installation - 4,800 rubles;
• eucalyptus, euro - 35,000 rubles, installation - 6,700 rubles;
• regular window, economy, oak - 6500 rubles, installation - 1570 rubles;
• PVC window, euro - 6500 rubles, installation - 2600 rubles.

Windows in the steam room of a bathhouse and their sizes: is it possible to install plastic windows?

It is not necessary to install large windows in the steam room. It all depends on your personal preferences. In any case, it should be possible to ventilate the room. If the view from the window is beautiful, then you can install a large window. Otherwise, a small element will be enough. There are no special rules for choosing a window for a steam room.

Under no circumstances should you install plastic structures that will emit harmful substances when exposed to high temperatures. The only option in this case is wooden structures. It might be worth asking how to make a window in a bathhouse that will become a source of pride.

Plastic windows

The popularity of PVC windows is growing every year. They are suitable for any premises - industrial, residential, public, so they can also be used in a bathhouse. Of course, we are talking about a dressing room, a relaxation room or a washing room, because plastic has no place in a steam room, even the highest quality.

Plastic windows for baths

Advantages of PVC windows

Plastic windows have a lot of advantages:

• they are durable;
• do not absorb moisture and therefore are not subject to swelling;
• resistant to temperature changes;
• sealed, have excellent sound insulation;
• do not require care;
• easy to use - easy to open for ventilation.

A plastic window is appropriate in the dressing room

Double-glazed windows, which provide high thermal insulation and tightness, are best suited for a bathhouse. Such windows retain heat even when it is twenty degrees below zero outside. Standard plastic windows are white, but if desired, you can order products with frames of any shade or with imitation of natural materials. The most popular coatings imitate oak, pine or mahogany.

Flaws

First of all, plastic, even very high quality, cannot be healthy. It does not allow air to pass through, which means condensation and stuffiness appear in a closed room. When heated, plastic emits harmful fumes, and the worse the quality of the material, the greater the harm to health. Low-quality plastic emits harmful substances even at room temperature, which is why you cannot purchase windows without the appropriate certificate, at a low price, and from resellers.

Plastic window defects

Plastic has one more drawback - it is easy to damage. A blow to the frame can cause cracks, and mechanical stress can cause scratches. It will not be possible to eliminate such defects, and this reduces the attractiveness of the window. The only way out is to replace the entire structure, and this requires additional investment.

Modern plastic windows are quite difficult to break, but cracks after an impact cannot be avoided

Selection of PVC windows

Selection of PVC windows

Plastic windows differ in size, configuration, quality of fittings and profiles, and number of chambers. Everyone chooses the size and shape individually, depending on the dimensions of the room, its purpose and their own preferences. You can install small rectangular windows, square, in the form of trapezoids or triangles.

Schemes of shapes of PVC window frames

If the interior of the bathhouse is decorated in a marine style, round windows that imitate portholes on a ship will do. If the view from the bathhouse is beautiful enough, you can install a wide panoramic window in the relaxation room or dressing room.

The quality of the profile and fittings is the most important criterion when choosing windows. The profile of German manufacturers is very popular, a little less – Turkish

You need to pay attention to domestic enterprises that produce windows together with German partners, using their technologies and equipment. Such windows have a lower cost, but are of the highest quality, already time-tested

Profile selection. Scheme of plastic windows and fittings

Comparative characteristics of profiles

PVC windows can be fixed or openable.

Blind window

The second option is equipped with a special mechanism, which comes in three types:

• turning;
• folding;
• tilt and turn.

The turning method is the traditional opening of a window using a handle: the sash is rotated along a vertical axis to the right or left, depending on the location of the hinges. With the tilting method, the upper part of the sash moves away from the frame at a certain slope. With the combined method, the sash moves both vertically and horizontally; just turn the handle in a certain position.

The number of chambers in a double-glazed window affects the heat and sound insulation properties of the structure. Moreover, the more cameras, the more expensive the window. A single-chamber double-glazed window consists of two glasses, between which there is an air gap, and a double-chamber glass unit consists of three glasses and, accordingly, two air chambers. The most expensive design is equipped with a three-chamber double-glazed window. Width of double-glazed windows: 24, 28, 30, 32 and 42 mm.

Types of double-glazed windows

Double-glazed windows

Three-chamber double-glazed window

Profile chambers are cells in a plastic frame that not only give rigidity to the product, but also do not allow heat to escape. The more cameras, the more reliable and warmer the profile. The most common are three- and five-chamber profiles, although there is also a six-chamber one. A five-chamber one is more suitable for a bathhouse, since it is wider and it is possible to install thicker glass.

Cameras in plastic profile

Kaleva Deco windows with six-chamber sash profile

In different bath rooms

Yes, there is a point that windows need to be installed differently in different rooms of the bathhouse.

Installation in a steam room

The steam room is a hot room; many people prefer sauna conditions, plus high humidity. All chemistry, if it stands here, will definitely emit volatile organic matter. On the other hand, polyurethane foam is polyurethane, and it is not recommended for use in a steam room. In general, you just need to remember that it is better not to fix the window in the steam room with polyurethane foam.

ADVICE! Instead of polyurethane foam, kosher insulation for steam rooms - jute, flax fiber and the like - are quite suitable.

It is best to fix the window in the opening using dowels, dowels, and anchors.

In other rooms

In all other rooms of the bath there is neither such humidity nor temperature. Therefore, the use of polyurethane foam can be considered justified. Just don't rely on foam alone - it's a bad idea. And when choosing plates, do not take those that bend like paper in your hands. Take stiff, reinforced ones.

*** At this point, it’s time for Scheherazade to finish her permitted speeches. If you find something useful, tell your friends. By the way, we now have a channel on Telegram.

General rules and nuances

According to SNiP and GOST, sauna windows have serious requirements, which depend on the location: steam room, dressing room, relaxation area and shower room. This is due to the different temperature and humidity characteristics of the internal air in each of these rooms.

Main characteristics of window blocks for bath rooms:

1. 
   The window in the steam room is installed small, usually 400x400, maximum 500x500 mm.
   This is due to the fact that such a room, as a rule, has dry air, artificial lighting, and high requirements for thermal resistance.

   According to these characteristics, window frames should be made only of wood, including window locks and latches.

2. In the steam room, the window is placed near the top shelf. The optimal height for the location of the window unit is at eye level of a person in a sitting position.
3. In the washroom and shower, the window is placed on top.
4. If the steam room has safe electric lighting, it is permissible not to install a window in the steam room.
5. Windows should be placed away from the heater, in this case the thermal insulation of the room will be ensured as much as possible.
6. Bath windows are not painted or varnished, they are only impregnated with a special antiseptic.
7. For bath rooms, double and triple glazing is installed.
8. To create effective microcirculation, you will need to open the windows and the front door at the same time.
9. Glazing of bath frames can be done with 4 mm glass.

Attaching the box to the doorway

Having made the markings, you remove the canvas and insert only the box into the opening. According to the rules, the dimensions of the opening should be at least 1 cm larger on each side than the box. However, in practice the gap between them may be larger. The main thing is that it is not wider than the platbands with which it will be closed later.

Your main tool at this stage of installing a bath door with your own hands will be a level and/or plumb line. To make your work easier, you should first align the geometry of the opening itself.

Then you need to cut small wedges. When choosing a size, keep in mind that they are driven flush with the wall, because many people prefer not to pull them out after installation is complete. But this is a matter of taste. Although... it is cost-effective to leave the wedges when the door is supported solely by polyurethane foam. But we will not recommend this method.

ATTENTION! Decide on the method of mounting the box in advance - if you decide to mount it with drywall hangers, you will have to screw them to the box in advance.

So, we have three reliable methods of fastening at our disposal when installing a bath door with our own hands:

• suspensions;
• hidden three-point fastening;
• open six-point.

For suspensions

Hangers are freely bending carved metal plates that are attached to the side of the box facing the wall, and then placed on the wall on both sides, fixed with screws and cut so that they can be hidden with platbands.

ADVICE! To ensure that the ends placed on the wall do not rise above the surface of the wall (if this is a problem when installing platbands), the wall should be recessed to the required area.

Useful video

A video that very clearly shows how the box is secured in the opening using hangers:

Hidden three point mount

Its principle is simple. You can use long screws, dowels, or even anchor bolts to firmly connect the box to the wall. But not everyone likes it when the jambs are perforated with fasteners. Therefore, it was decided to make holes where they would be least noticeable - for example, under the hinges or in the area of ​​the lock on the other side of the door.

ATTENTION! Yes, you will indeed hide any signs of fastening, but if you limit yourself to three points, then the reliability will not be very high.

Six point mount

It can be called the most reliable and least aesthetically pleasing, although plastic plugs, the color of which is close to the color of the jamb, are usually used to disguise the screws.

The same screws, dowels or anchor bolts can be used as fasteners.

ON A NOTE! Having pre-drilled holes for fasteners, do not forget to widen it to recess the heads and future plugs.

Useful video

There is nothing complicated in this method, but it is better to make sure by seeing how the installation of a bath door is done in the video with your own eyes:

Stage 3. Important points during manufacturing

Finished wooden trims should not prevent the doors from opening by at least 90ᵒ. Regarding other parameters, they are selected individually in accordance with the size of the opening. For fastening, you can use spikes or connect elements in half a tree.

Original platbands

The lower part of the product is made in the same carved way and must include the bevel required for the drainage. It is typical that the thickness of the lower part should exceed the thickness of the upper by at least 1 cm.

How to make platbands

Small slats are nailed on both sides of the opening - they will hide differences in the walls (if any). The thickness of the slats should match the width of the gap, at least approximately. The final fastening is carried out only after careful adjustment of the joints.

Window glazing

Windows must have double glazing. Even if the window frame is single, glass is attached to it on both sides. If you achieve a tight fit between the frame, binding and glass, the window will not fog up. For this purpose, all cracks are sealed with putty or lime-cement mortar. It is imperative to make a window - it will facilitate the ventilation process.

If the walls of the bathhouse are built of brick, then the window openings can be sealed with hollow glass blocks. They will give the light in the bathhouse softness and diffuseness. In addition, it is impossible to see inside the room through them from the outside; they are stronger than window glass, easy to clean and resistant to moisture.

To ensure that the laying of glass blocks is as smooth as possible and has tightly filled seams, it is better to make a panel from them according to the size of the window opening, which is then installed entirely. The width of the mortar joint between blocks should be 6 mm. Compensatory temperature gaps must be left in the window opening on the sides and top of the panel. These gaps are filled with an elastic gasket made of heat-insulating material (for example, bituminized glass wool).

Articles about baths:

• back to the section “Building a house with your own hands”
• Bath brooms
• Bath and sauna in the house
• Ventilation holes in the bath
• Bath ventilation system
• Internal structure of the bath
• Interior decoration of the bath
• Construction of a chopped bathhouse
• Construction of bath walls
• Auxiliary materials for the construction of a bathhouse
• Choosing a place for a bath
• Choosing a stove for a bath
• We make furniture for a bath
• Reducing humidity on the walls of the bathhouse
• Which sauna should you choose?
• Choosing stones for a bath
• Installation of a sewerage system for a bathhouse
• Caulk of a wooden bath
• Operation of hatches and chimneys
• Materials for building a bathhouse
• Installation of a concrete floor in a bathhouse
• Installation of a wooden floor in a bathhouse
• Bathroom ceiling installation
• Lighting in the bath
• Features of choosing tiles for a bath
• Finishing of sauna log houses
• Bath heating
• Cleaning the ash pan
• How to choose the right stove for a sauna
• How to take a steam bath correctly
• Heaters for solid fuels
• Steam room ceiling
• Rules for lighting the stove
• Types of sauna stoves
• Bathhouse repair
• Chimney pipe repair
• Repairing the crown of the chimney
• Bath walls
• Arrangement of the roof of the bathhouse
• Thermal insulation of the bath
• Oven Installation Instructions
• Bathhouse foundation
• Cleaning chimney bricks
• Choosing an electric heater for a sauna

Window sashes

1. Taking into account the size of the assembled window frame, we prepare eight blanks. We make spikes and eyes.

2. We assemble two frames, connecting the parts with waterproof glue.

3. After the glue has dried, we use a molding cutter from the front side along the perimeter of the edge of the frame.

4. Using a 10 mm groove cutter along the perimeter of the frame, we make a quarter cut with a depth of 20 mm. The operation is performed with a double pass of the cutter.

5. Select a quarter for the glass using a 10 mm groove cutter. On the outer sash of the window, the quarter is made on one side, and on the inner sash - on both sides.

6. Using a sharp chisel, cut off the curves in the area where the cutter transitions from one surface to another. Then we sand the wooden window.

We move on to the next stage - installing fittings and hanging window sashes.

If you are satisfied with the results of your work, then all that remains is to glaze the sashes. It is advisable to seal the glass with silicone sealant.

The product is coated with two layers of varnish. After the varnish has dried, a self-adhesive seal is glued around the perimeter of the sashes.

That's all! The wooden window is assembled with your own hands and is ready for installation in the window opening. Having assembled one window in this way, you can then produce bath windows for friends and neighbors.