How to clean frosted glass with your own hands: advice from professionals

Modern stylish home furnishings, especially kitchens, are often decorated with glass with a matte finish, which is often contaminated not only by drops of vegetable oil and other fatty liquids, but also by the sweat and grease traces of human hands. It is not so easy to remove such contaminants from matte surfaces without damaging the surface protective layer. Therefore, in this article we will take a closer look at how to wash frosted glass from greasy stains at home and preserve the beauty and aesthetics of its appearance.

Main causes of pollution

Before you start cleaning up contaminants, you need to familiarize yourself with the main reasons for their occurrence.

Dust

Most often, dirt on the glass door surface appears due to high dust levels in the room. If you do not clean your apartment for a long time, dust particles will begin to settle on the glass and gradually accumulate. Therefore, it is recommended to regularly do wet cleaning to keep the room dust-free. Each room must be cleaned at least once a week.

Handprints

Some people touch the door glass with dirty hands, and because of this, hand marks remain on it. Regular glass coatings are easy to clean from such prints, but matte surfaces are much more difficult to wipe off. Difficulties arise due to the following reasons:

• unevenness and roughness that complicate the cleaning process;
• matte coating that absorbs dirty stains.

Dried splashes and drips of water

Doors with opaque glass inserts are often installed in bathrooms. After using the doors for a long time, dried splashes or even water stains appear on them. Such stains are considered the most harmless, since they are the easiest to wipe off. To do this, just wipe them with a cloth soaked in soapy water.

Stains from grease, soot and food

Such stains appear on structures that are installed in the kitchen. The main feature of these contaminants is that they are absorbed into the surface of the doors and into the frosted coating of the glass. Therefore, it is very difficult to clean products from traces of soot or grease. You will have to use special detergents that contain substances to combat greasy stains.

Street dirt

Residents of private houses often encounter street dirt on their door coverings. Most often it appears on products that are installed in the loggia or veranda. It is easy to get rid of ordinary dirt, as it can be easily washed off with water.

It is important to know!

Before you begin the procedure for cleaning frosted glass from traces of grease, you should familiarize yourself with the following information:

1. Frosted glass has a rather rare feature of its structure, which consists of a special surface coating. Due to this, it becomes so difficult to wash off a greasy stain on frosted glass. This is due to the fact that microparticles of any substance in contact with the matte surface begin to penetrate into the microscopic recesses of the matte coating, which prevents 100% cleaning using standard detergent components.
2. Washing old grease stains on such glass is much more difficult than fresh stains. Therefore, it is recommended to be more attentive to the care of frosted glass and try to remove all dirt as soon as it appears.
3. When using any cleaning component, first of all, you need to take care of preserving the skin of your hands and the respiratory system, so it is recommended to carry out the treatment procedure with rubber gloves, opening all windows and doors, thereby ensuring free access of oxygen.
4. Before applying a specific cleaning agent to the contaminated area, you should first test on an inconspicuous area of ​​the glass for the joint interaction of the components, and if nothing happens, then you can safely use the selected ingredient to eliminate the full treatment.

Required tools and materials

You need to choose the right tools for cleaning frosted glass. Allowed to use in work:

• Means and compositions for cleaning windows and glass surfaces;
• soft rags;
• microfiber cloths;
• plastic or rubber spatula;
• soap-water solution;
• acetone, ammonia, vinegar, chalk and alcohol;
• alcohol-based solvents.

Homemade chemicals and solutions will help you get rid of grease stains and more, without much effort. Before using them in your work, you should carefully read the instructions and the list of surfaces to be treated. Strictly follow the dosage and application rules. It must be remembered that frosted glass has a coating layer and is very easy to damage.

You can try to remove old stubborn stains with a steam cleaner, setting it to the “Continuous suction” mode. Dishwashing detergents do not contain abrasive components; they can also be used at work.

Except for those that contain acid, for example “San Klin” or “Shumanit”.

Soap solution

Use a soapy solution to knock out fresh dirt:

1. Apply to a sponge. Rub dirty areas thoroughly.
2. Wash with lukewarm water.
3. Dry with a soft cloth.

The soap solution is also suitable for prevention. Clean frosted glass with it at least a couple of times a month.

You may also be interested in: How to get rid of the smell of diesel fuel on clothes

Using household chemicals

You can wash frosted glass in interior doors using household chemicals, but not all of them. Recommended chemicals:

1. To clean cloudy glass surfaces, you can use regular dishwashing detergent: the surface is treated with a solution, washed off with warm water and wiped dry. To clean glass inserts with detergent, it is advisable to use a soft cloth. If there are dried stains, pre-soaking is required.
2. You can also clean frosted glass inserts with sprays containing alcohol or acetone. These substances dissolve grease stains and glue marks well. Such contaminants should be removed before washing the glass completely. Use products containing alcohol or acetone with caution, as they have a negative effect on the silicone door seals.
3. When washing frosted glass elements, it is prohibited to use products containing acids, alkalis, ammonia and gasoline. Cleaning abrasive powders and metal brushes are also prohibited: they will scratch the matte glass surface. To remove difficult stains, it is good to use a rubber spatula.

Potassium permangantsovka

Potassium permanganate will remove old coffee and greasy marks, and will also cope with fresh glue stains:

1. Put a little potassium permanganate in warm water.
2. You stir. Do this until the liquid turns a rich dark red color.
3. Apply to a sponge and wipe the glass.
4. Wash with running water and dry with a soft cloth.

It will also be useful: How long do fresh champignons last in the refrigerator?

Dishwashing detergents

Just be aware: dishwashing detergents contain a lot of foam. Clean it with a sponge or microfiber. The most powerful remedies include:

1. "Mister Muscle". With its help, you can easily remove dust and small greasy dirt on the frosted glass of the door.
2. Pril and Ajax. Will overcome old greasy stains, remove traces of glue and grease

The sun's rays harm wet matte surfaces no less than all those annoying vampires. Therefore, clean in the evenings.

Store formulations

"Mister Muscle"

Just the name of a detergent often brings a smile, so tired of annoying advertising. But if you look through thematic forums and analyze the reviews of housewives, then most people prefer this cleaning product. This is one of the best options for removing dirt from frosted glass.

But "Mr. Muscle" is effective if the panel is only slightly dirty. It is powerless against a layer of dirt and oil stains. And the expense of funds turns out to be large; Taking into account the cost, use in such cases is hardly advisable.

Folk recipes

There are several folk remedies that will help clean the matte surface on glass.

Ammonia

The most popular cleaning agent for coated glass is ammonia. It is used to prepare a detergent that effectively fights almost any stain. To prepare the solution, add 10 milliliters of ammonia to a liter of water. The mixture is sprayed with a spray bottle and rubbed with a cloth. After this, the wiped coating is washed with cold water.

Vinegar 9%

Experts advise using vinegar liquid to clean glass. It will help get rid of ordinary dust and wipe away stubborn greasy stains. To prepare the solution, add a tablespoon of apple cider vinegar to a glass of water. Then soak a rag in the solution and wipe the door with it. To prevent the coating from smelling like vinegar, it is washed again with soapy water.

Baking and soda ash

Sometimes vinegar and ammonia do not help clean the surface of the glass from dirt and you have to use soda ash and baking soda. It is added to water in a ratio of one to five, after which the matte product is treated with the soda mixture. You can also not dissolve the soda, but simply rub it into the surface, rinse with water and wipe with a dry towel.

Powdered chalk or starch

If there is a lot of dirt on the glass surface, you can use starch or chalk powder from which a cleaning solution is prepared. To do this, add 45 grams of the substance to 500 milliliters of water, after which the liquid is thoroughly mixed. Then soak a cloth in a container with the mixture and wipe the glass with it. Remains of chalk are wiped off with a regular dry sponge or rag.

Denatured alcohol, vodka and cologne

An effective means for cleaning dirt can be prepared from cologne, regular vodka and denatured alcohol. All components are mixed in equal quantities. Then the liquid is evenly applied to the dirty surface and left for 10-15 minutes to soak in the dirt. After this, use a rag soaked in water to wipe off the remaining dirty marks.

Potassium permangantsovka

To combat old stains, you can use a manganese solution. When preparing such an effective manganese mixture, 55 grams of manganese are added to a liter of boiled water. The solution is stirred until it turns a dark reddish color. Moisten a sponge in the prepared liquid and wipe the surface of the door glass with it.

Steam

Sometimes people don't want to use cleaning fluids, so they steam the frosted glass instead. For this, a special steam generator is used, which not only removes dirt, but also degreases the door. Steaming should last for five minutes. Then wipe the cleaned surface with a dry cloth to remove any remaining moisture.

Proven ways to clean a mirror without streaks

There are different ways to clean mirror surfaces from dust and dirt. Let's consider those that are used for any type of reflective glass.

Mirror in the bathroom

Increased humidity levels contribute to the gradual process of fading of the mirror. To prevent this phenomenon, you need to use a special mixture based on melted wax and turpentine. The solution is prepared at a ratio of 1:2 and applied to the back of the glass. To prevent fogging, the contour of the hanging mirror is covered with plastic tape. Another option is to coat the back of the accessory with oil paint.

Step-by-step washing sequence:

1. Wipe with a dry cloth.
2. Wiping with a damp (not wet!) cloth.
3. Rinsing the mirror cloth.
4. Treatment with cleaning agent.

You can add shine with a proven folk remedy: sprinkle with lemon juice and leave for 10 minutes, wipe with a dry piece of gauze. Citric acid dissolved in water will remove old stains.

Raw potatoes cut in half will effectively remove dirty deposits. The reflective glass is wiped with half a vegetable, then rinsed and wiped dry. To add shine, soak a cotton cloth in milk and polish the surface.

You can wash a dull mirror at home and return it to its original shine by diluting the blue in water, soaking a piece of fabric in the solution, washing the cloth and then wiping it dry.

Table vinegar essence mixed with water in equal proportions will help remove limescale stains. After treatment with the mixture, the reflective glass should be treated with a soft, dry cloth.

To add shine to your bathroom, use ammonia. If you wipe down the shower stall and polish it with sheets of newspaper, you can remove soap smudges that remain after taking a shower.

To clean mirror surfaces, use wet wipes - wet wipes leave soapy streaks.

Industrial detergents

No less effective at removing stains on frosted glass:

• Laundry soap. A piece of the bar is grated on a coarse grater. The resulting shavings are mixed with warm water. The solution is suitable for routine wet cleaning. Works well on dirt and fresh greasy stains.
• Dishwashing liquid. Like soap, it is used to clean simple stains and pre-wash frosted glass. It is applied to a damp cloth or the soft side of a sponge, and then to the surface.
• Glass products. Compositions containing ammonia or isopropyl alcohol will also clean matte surfaces. For routine cleaning and removal of recently appeared stains, for example, “Mr. Muscle”, “Clin”, “Help” are suitable. A more serious problem will be solved by “Fratty Cleaner”, “IKeep!”.

Reliable old methods

Modern household chemicals are reliable.
These include special liquids and sprayers. But they require additional safety measures, working with gloves, or even a respirator. Allergies and a strong smell in the apartment are not the most pleasant consequences of using special products. It’s easier to focus on old, still Soviet methods. The following proven methods will help you successfully resolve the issue:

1. Potato starch. It must be dissolved in water at the rate of 1 tbsp. spoon for 1 liter. Stir thoroughly until the grains disappear completely. Cold water should be used. You can even wash off dried dirt with this product.
2. Salt. If you wash a window with its solution, it will shine. You need to add 30-40 g of salt to a ten-liter bucket of water. This solution is good for use in the fall, and then in winter the windows will freeze less. Salt can be replaced with chalk, but then the glass will have to be wiped with more force.
3. Potassium permanganate. Its weak solution copes well with dirt and leaves almost no streaks.
4. Laundry soap without dyes or fragrance additives. It needs to be finely chopped or grated, placed in warm water and stirred until foam appears. The soap solution removes dust and dirt well, but after washing you will need to wipe the surface with a dry cloth made of natural fabric.
5. Kerosene. Although this is outdated, it is a very reliable tool. For 10 liters of water you will need 3 tbsp. spoons of kerosene. There are no streaks left after washing with this composition, but the smell will be present until the remaining active substance has completely evaporated.
6. Ammonia. In pure or slightly diluted form, it removes glue residues, paint, grease stains, and soot well. If you add alcohol to water, it will be much easier to clean the windows.
7. Vinegar. Using its solution, you can return tarnished glass to its former shine. For the same purpose, a washed window can be wiped with a soft cloth slightly moistened with linseed oil.
8. Alcohol and glycerin in a combination of 1:20. Treatment with this combination prevents glass surfaces from fogging.

Remove stains and add shine

Any cleaning product will show good results only if it is used correctly. Frosted glass should be washed in the following order:

1. Moisten the glass sheet with a soft cloth or sponge soaked in warm water.
2. Using top-down movements, clean the dirt with a solution of laundry soap or dishwashing gel. Then remove the remaining product with warm water. If an industrial glass cleaning liquid is used, wipe the surface with crumpled paper or a dry cloth.
3. Using the selected solution, old stains are removed if previous formulations have not dealt with them.
4. Using a spray bottle, spray the glass with a solution of chalk or starch and leave it until dry.
5. Use a dry cloth or crumpled newspaper to clean off the powder and rub the surface until it shines.

If the glass requires cosmetic care, a solution of chalk or starch is sufficient to clean it. Then the treated surface is polished.

What difficulties may arise

There may be a stain on it that will take some effort to clean. It can easily break under pressure. Then it is possible to lay the glass horizontally with the dirty side, or carefully select a cleaning liquid. Before physical cleaning, leave this liquid on dirty areas and only then remove it.

When cleaning the house, difficulties may arise with glass.

Sometimes the cleaning liquid is not selected very well and the glass literally “attracts” dirt to itself. Cleaning it is quite difficult and you don’t want to do it often.

From time to time you need to tidy up glassware that has a narrow neck. Warm water is poured into it, and a couple of drops of cleaning liquid or eggshells are added. In this state, the dishes are left for a while, then shaken and, making sure that the bottom and walls of the vessel are clean, you can rinse it and dry it.

General cleaning of frosted glass

• Before washing frosted glass from grease stains and other contaminants, moisten the glass with water and leave for two to three minutes;
• Spray the selected cleaning agent onto the surface and wipe with a soft cloth using light circular motions;
• Do not press too hard on the product and process the glass on both sides;
• After the procedure, rinse the solution from the surface with a damp, clean cloth, and then wipe the glass dry. This will avoid soap stains;
• When washing, use only cold water!

Step-by-step instruction

To clean frosted glass, just follow a few steps:

1. Soak a sponge or soft cloth in warm, clean water.
2. Apply cleanser to stained areas and scrub lightly.
3. The final step is to remove the residue and polish with a dry cloth.

Wash the frosted glass on the doors as carefully as possible: do not allow strong drips, do not press on the edge, trying to clean a thin strip along the strip. Otherwise, it’s easy to damage the door, squeeze out or break the glass

A fresh stain is easier to remove. Therefore, it is recommended to treat the matte surface immediately.

How to remove difficult stains

To remove old grease stains, use alcohol or acetone. To do this, soak a soft cloth or cotton pad in the solution, then wipe the contaminated area. Make sure that the product does not get on the seal, trims or moving parts of furniture or doors. If this happens, immediately rinse the solution with warm water and wipe dry.

A chalk solution will provide effective and safe removal of grease and plaque, stains from food and drinks, traces of glue, tape and paint. To obtain the product, mix two to three tablespoons of crushed chalk or chalk powder with a glass of cold water. Spray the resulting mixture from a spray bottle onto the surface and leave until it dries. Then carefully remove the stains with paper or a napkin.

Instead of chalk solution, bleach or ammonia is also used. In the first case, add 50 grams of lime to a liter of water and mix. The cleaning method is the same as with chalk. To prepare an ammonia solution, add a spoonful of ammonia per liter; for a vinegar mixture, add a spoonful of vinegar per glass of water.

You need to moisten a soft cloth in ammonia or vinegar solution and begin to wash the affected areas of dirt. To make the work more efficient, take a special chamois for glass surfaces or a rubber spatula. After treatment, wipe the surface with a damp cloth and wipe the glass dry.

In addition, difficult stains can be removed using steam. To do this, use a steam generator or steam mop. Water vapor effectively removes greasy and old stains, food and finger marks, and helps fight mold and mildew. The steam generator is suitable for almost every material, including frosted glass.

We learned what to use and how to clean the frosted glass on the door. By the way, the methods listed are suitable for washing or cleaning shelves, tables and other furniture made of this material. Now let's learn about regular care of frosted glass, which will allow you to maintain the products in proper shape.

What should you absolutely not wash frosted glass with?

This type of glass has a specific surface that appears as a result of sandblasting or acid treatment of the glass. The rough texture is very sensitive to the influence of aggressive agents, so treatment of such glasses should be completely avoided:

• strong abrasive compounds and materials;
• products that contain silicone, any acids or alkalis;
• hard (metal) scrapers and spatulas.
• Strong solvents and detergents.

The use of these products may damage the coating layer on the glass.

Rules of care

Cleaning glass is a tedious and time-consuming process. Maintenance of frosted glass must be correct. Some recommendations must be followed to avoid surface damage.

How to care for glass:

1. A solution of glycerin and alcohol made in a ratio of 20:1 will help prevent fogging.
2. Remove dust frequently with a microfiber, suede or wool cloth. To keep it from sitting down longer, add a few drops of essential oil.
3. Do not press on the surface.
4. Wipe with light circular movements on both sides.
5. To prevent streaks from remaining on the surface after using detergent, it is necessary to rinse the glass with cold water and immediately remove excess moisture.
6. To keep the surface clean longer, treat it with car polish.
7. Do not allow sunlight to come into contact with wet sandblasting. When exposed to ultraviolet rays, the surface becomes dull.
8. Do not touch frosted glass with your hands. There will certainly be greasy fingerprints on them.
9. Do not allow surfaces to dry out on their own. There will be divorces.
10. After cleaning, rinse with vinegar solution. It disinfects surfaces. After such cleaning, the treated inserts will remain clean longer.

Advice from professionals

Knowledge of the subtleties of caring for matte surfaces, and most importantly, their daily use, greatly facilitates the task of washing and prevents the formation of stains that are sometimes difficult to deal with. Care instructions:

1. The matte surface of the glass should be washed with cold water, and after washing, wipe immediately with a microfiber cloth.
2. If you want to add shine to a matte surface, then treat it with a water-starch solution (for 1 liter of water you need a tablespoon of potato or corn starch). Wash the glass with this mixture and wipe it dry.
3. Daily wiping of matte inserts or products made from it with suede or velvet will keep them clean and attractive.
4. It is better to wash frosted glass in the evening. This way, the likelihood of exposure to ultraviolet radiation is minimized. Its impact may cause the surface to become dull.

Following these simple rules for care and cleaning will help you quickly and efficiently remove unwanted dirt without harming surfaces. When deciding to install them (this applies to interior doors) or buy (furniture sets and household items made from it), you should know that caring for them is somewhat more difficult than for glossy surfaces. And if they already exist, then they should be looked after, washed and cared for correctly. You already know how to do this, strictly follow the technology, and your matte surfaces will always be clean and undamaged.

How to remove grease stains from frosted rough glass

You can clean a rough glass surface using the following products: PROFOAM 3000, AJAX, PRIL or Mister Muscle. But how can you clean frosted glass from greasy stains if you don’t have these products? You should use chalk diluted in water, a bite, ammonia/ethyl alcohol, and after treatment, rub the contaminated area with newspaper, eliminating not only the remnants of the product used, but also grease stains.

Frosted glass surfaces are very popular nowadays, but they require special care, since dirty doors and glass are unlikely to please the eye. However, it is important to approach cleaning frosted glass correctly in order to restore it to its former attractiveness and not harm it.

What is the difference between frosted glass and regular glass?

Frosted glass differs from regular glass in manufacturing technology and appearance. It is done as follows:

• a special decorative film is glued onto ordinary glass;
• coated with a coating that saturates the shade and gives it a matte finish.

Because of this, the surface of the glass becomes rough, which makes it difficult to clean and increases the intensity of contamination. That is why it is important to know how to properly clean frosted glass with or without a pattern from greasy stains so as not to damage the surface.

What to pay attention to

Caring for frosted glass has its own specifics, and before choosing a product to wash the insert, you need to make sure that it is not its plastic counterpart. In appearance they are almost identical, but in properties they are not. And what is good for one material may well harm another. The simplest testing is done like this; if you lightly hit the panel with a metal object, and the sound will be clear - silicate glass, only frosted; more deaf - a polymer-based substitute (plexiglass, plexiglass).

Not all preparations are suitable for washing matte inserts. Products that contain:

• organic solvents;
• alkalis or acids;
• gasoline, even aviation gasoline;
• abrasive components. As an example, detergents and tooth powders. And even more so various brushes and scrapers.

So that after washing the frosted glass there are no streaks on it, it must be wiped dry immediately. If moisture remains on the surface, then after it evaporates, characteristic “patterns” will certainly appear.

In most cases, even the best preparation does not help to clean glass from dried drops of grease. A good solution is to soften this layer; then it can be easily removed with a damp cloth. At home, you can use a steam cleaner (suction mode) or a modern iron with this function.

Ordinary starch gives the characteristic shine to frosted glass; it is diluted at the rate of a tablespoon/liter and used to wipe the insert. After this treatment, dust and dirt will not stick to it, and your fingers will not be imprinted. It is advisable to practice weekly.

It turns out that choosing a product for cleaning frosted glass is not so difficult. It remains to add that if you regularly monitor the condition of the doors, you won’t have to waste time looking for medications and cleaning the panels. In this regard, the advice is simple - you need to wipe the inserts daily with a soft cloth, preferably velvet or suede. And then frosted glass will always look perfect.