Price of plastic windows for home series 1-LG600 “Ship”

In 600 series houses, in ships

◀ In apartments ◀ Plastic windows

Homes of the 600 series, popularly known as "ship". They got their name from the long lines of glazing on the facade. These panel residential buildings, built in the 70s of the last century, are also known as “Brezhnevki”.

Ship houses are typical only for St. Petersburg. Most often there are buildings from 9 to 15 floors, less often 5 floors. In this category there are additional modifications of the series: 600.1 and 600.11. Compared to the 600 series, in these two the kitchen size is increased to 10-11 meters. Noise and sound insulation has been significantly improved, but not ideal.

House 600 series. Ship. Dot.

An apartment building of the 600 series, a ship, where more than half of the windows have already been replaced with new plastic ones.

Plastic windows in ship houses. Installation Features

Houses 1 – LG 600 series look aesthetically pleasing from the outside. Apartments in ship houses are not very comfortable. The windows in the kitchen are high, the thermal insulation of the walls leaves much to be desired. It will not be possible to carry out redevelopment in the ship, since the panels carry the load of the upper floors. Let us highlight the main features of installing windows in ship houses:

• The slope in the ship's house after replacing the windows with plastic ones will have a depth of 10 cm.
• The lower connection of the window to the wall can be designed as a slope. But it will be more convenient to install a small window sill with a depth of 10-15 cm.
• A window sill in a ship's house can be mounted not only under the window, but also under the balcony door, where it will serve as a threshold.
• New ebbs in the ship's house will be needed with a depth of 15 cm. The length of the ebb will be significantly greater than the width of the window and will be 3.2 m.
• After fixing the plastic window in the opening, the seams are sealed with polyurethane foam. It is unacceptable for the foam to be open on the street side, since it quickly collapses under the influence of ultraviolet radiation. To protect the sealing layer in a ship's house around the perimeter of the window, outdoor trim will be required.

Metal-plastic windows in "SHIP"

A very common series of houses in St. Petersburg is 1-LG-600 or simply “Ships”. These are 9-15 storey panel buildings, they were built in the 1970s-1980s. There are many such houses located in the Grazhdanki district, Kirovsky and Krasnoselsky districts of St. Petersburg.

“Ships” are characterized by very thin external walls up to 18 cm and most often there are no window sills. There are no freight elevators in these buildings; the windows are large and have to be lifted to the upper floors manually.

Installing a PVC window in the “Ship” is necessary to preserve heat inside the premises, as well as increase sound insulation. The process does not require large expenses.

Our company offers profile systems from various manufacturers, such as IVAPER-GEALAN, KBE, VEKA, REHAU.

Installing a window in the “Ship” does not cause any difficulties. The options for making windows in this series of houses are limited: mainly there are two types of three-leaf windows, as well as balcony blocks.

We offer to buy windows from “Ship”, directly from the factory, much cheaper in two versions of the window design.

The first option is a window with a single-chamber double-glazed unit of two glasses and a frame 62 mm wide. It will satisfy the needs of buyers planning a budget and practical option, which is not inferior in its characteristics to a double-glazed window due to the additional option in the form of energy-saving film and the injection of Argon into the window structure, which increases heat and sound insulation.

The second option is a window with a frame at least 70mm thick and a double-glazed unit of three glasses.

On our website you can buy a metal-plastic window in the “Ship” in St. Petersburg inexpensively. Just choose a window option, print out the order form and come to our office to conclude an agreement. We guarantee 100% that the price of the window will not change if the actual dimensions of the window do not differ by more than 10 cm. Price for plastic windows in “Ship” with delivery and installation “TURNKEY” with a single-chamber double-glazed unit of two glasses and a frame width 62 mm:

A metal-plastic window in the “Ship” for the kitchen of THREE sashes is inexpensive in St. Petersburg, only 14,999 rubles “ALL inclusive” A metal-plastic window in the “Ship” of THREE sashes for the room is inexpensive in St. Petersburg only 16,499 rubles “ALL inclusive” Metal-plastic door on a balcony with a window, in the “Ship” is inexpensive in St. Petersburg only 16,699 rubles “ALL inclusive”

Replacement of windows in ship houses 1 – LG 600 series. Recommendations from Montferrand specialists

• In ship houses, you should not skimp on thermal insulation. Conventional single-chamber double-glazed windows are not suitable for glazing. To keep the apartment warm and prevent condensation from forming on the windows in winter, it is necessary to install windows with the warmest energy-saving or double-glazed windows.
• For a ship's house, metal-plastic windows made from profiles 58-62 mm thick will be sufficient. Such windows, with properly selected double-glazed windows, will provide warmth and comfort in the apartment. Profiles with a thickness of 70-80 mm will help to further increase thermal insulation, which will allow the use of double-glazed windows with a thickness of 44 mm with the highest heat and sound insulation characteristics.
• The windows in the ship's house are divided into three sections, at least one of which must be made openable for washing the window and ventilating the premises. If it is uncomfortable to wash blind sashes, then it is better to make all window sashes openable.
• The slopes in the ship's house can be finished with plasterboard or a plastic sandwich panel. The sandwich panel is preferable because it is warm and does not require special care during operation.

Prices for windows with installation and slopes

Triple-hung window

Height 1420 * width 2680
RUB 18,000

Triple-hung window

Height 1420 * width 2680 19500
RUB
Cost of product including delivery, lifting, installation and slopes. With window sill and low tide.

Triple-hung window

Height 1100 * width 2360
RUB 16,000

Triple-hung window

Height 1100 * width 2360 17500
RUB
Cost of product including delivery, lifting, installation and slopes. With window sill and low tide.

Four-leaf window, loggia

Height 1460 * width 2470
RUB 18,000

Four-leaf window, loggia

Height 1460 * width 2470 18200
RUB
Cost of product including delivery, lifting, installation and slopes. With window sill and low tide.

Balcony door with window

Door height 2130 * width 670 mm Window height 1420 * width 1790 mm
RUB 18,000

Balcony door with window

Door height 2130 * width 670 mm Window height 1420 * width 1790 mm 19500
RUB
Cost of the product including delivery, lifting, installation and slopes.
With window sill and low tide. It is possible to conclude a contract at the address

Plastic windows in a 600 series house, in a ship

Nine-story house 600 series, ship. Almost all the windows have already been replaced with new plastic ones.

• Features of glazing of buildings of the 600 series:

• window sills and slopes can be no wider than 15 cm;
• on the outside, the installation seam must be hidden with platbands;
• On the loggia in the ceiling there is a gap in the interfloor ceiling;
• There are no double-hung windows in 600 series homes;
• characteristic of the kitchen are “L”-shaped windows 90 cm wide;
• the balcony door is sometimes located perpendicular to the window, so when calculating the price of glazing, strips and connectors for joining are taken into account;
• loggia size 300x90 cm;

The main feature of the houses in this series are window openings located around the entire perimeter of the residential building and at different levels, white in color, with a huge number of loggias. At the same time, the external walls are made of aerated concrete and are quite thin. The windows have no sills or slopes.

House 600 series close up

House 600 series close up. Windows and loggia window openings are clearly visible.

What affects the cost of windows in a ship’s house 1 – LG 600 series

• The cost of windows for a ship's house in the basic version is calculated in the Veka WHS profile with Winkhaus fittings made in Germany. Double-glazed windows provide energy savings. Windows from the Rehau Blitz profile will cost RUB 1,500-2,000 more than the basic version.
• The use of profiles with a thickness of 70 mm will increase the cost of a window in a ship's house by 10-25%.
• A ship window with double-chamber double-glazed windows will cost 1000-1200 rubles more than the same design with single-chamber energy-saving double-glazed windows.
• A window with two opening sashes will cost 1600-2300 RUR more than with only one opening sashes.
• A mosquito net on an aluminum frame will increase the cost by 1100-1300 ₽.
• Climbing the stairs in the ship house will cost 50 ₽ per floor.

Advantages of installing plastic PVC windows in houses of the 600 series (“ship”)

Replacing wooden glass openings with plastic ones will help solve the issue of noise levels, and glazing the loggia with plastic structures will significantly increase the level of thermal insulation in the room. Thus, you can increase the living space of your apartment due to additional warm space. It, in turn, can be used either as a storage area or as an additional seating area.

Plastic window systems are highly durable. They are not afraid of fire. The structures are manufactured at the factory in accordance with all international standards. Finished products undergo multi-level quality control. Buying windows made of PVC plastic profile means taking your stay in the apartment to a new level of comfort. When you will be cozy and warm in winter, and cool and easy to relax at home in summer.

Windows to the "ship"

Home → Calculator → windows to the ship

Windows on the “ship” are ordered in residential areas of the city. Due to the fact that houseboats have poor thermal and sound insulation, we recommend installing warm Rehau windows. The calculator offers 3 different options: basic, warm and maximum warm. You can calculate the cost of a window online in profile and mm with single-chamber and double-glazed windows. On our website, the cost of a PVC window in St. Petersburg is indicated on a turnkey basis with accessories and services. You can accurately calculate the cost of the window by size after a free measurement. The master will arrive at a time convenient for you to take measurements, drawings and conduct a consultation. For your convenience, PVC windows in St. Petersburg can be ordered at home during measurement, so as not to waste time traveling to the office. And our promotions and special offers will help you buy windows cheaply.

Where they are: found in residential areas of the city, the main array is located in Krasnoselsky, Primorsky, Kirov, Vyborg districts.

House type: panel

When built: 1967 – 1989

Please note that the prices listed below are indicative. The total amount includes: dismantling, installation of products, window sill, drainage, and slope.

In order to find out the exact cost, you can call us or call a measurer at a time convenient for you for FREE!!!

Dimensions: height 1,130 mm, width 2,380 mm
Window sill: 150mm, Drain: 170mm, Slope: 150mm

Dimensions: height 1,440 mm, width 2,670 mm
Window sill: 150mm, Drain: 1760mm, Slope: 150mm

Dimensions: height 1,420 mm, width 2,380 mm
Window sill: 150mm, Drain: 170mm, Slope: 150mm

Dimensions: height 2,150 mm, width 2,380 mm
Window sill: 150mm, Drain: 170mm, Slope: 150mm

Glazing of loggias can be done inexpensively using various systems. Aluminum sliding balconies, like plastic sliding ones, are installed no higher than the seventh floor. For this purpose, the Provedal aluminum profile and Sliders sliding structures are used. We also carry out plastic warm glazing, the cost will be known with all the work after measurements. You can get advice on replacing glazing in a house-ship by calling 8(812) 454-20-10 or at all Becker Windows sales outlets.