Composition, types and features of use of Moment Montazh glue

Stamps

Glue Moment “Liquid Nails” is produced in 16 variations. Each has its own adhesive strength, differs in composition and is designed for a specific material.

• Express MV 50. Universal assembly adhesive, does not contain solvents, used for joining wood, PVC, insulating boards. You can plant baguettes, door jambs, and decorative elements.
• “One for everything. Super strong." Manufactured using Flexec technology. Plastic, monocomponent, has a high adhesive force, so it can be used to glue heavy and large elements. They can work on any surface with any porosity, seal cracks, and seal. Moisture accelerates the hardening of the joint, so it can be used in rooms with high dampness. They can be used to connect natural stone, concrete, brick. The product is not used for working with glass, copper, brass and PVC.
• “One for everything. Transparent". It has the advantages of the previous brand, it helps to seal seams in water, but not in conditions of constant immersion. Shelf life: no more than 15 months.
• Glue Express Decor. White acrylic composition. Quickly glues any materials, but maximum adhesive ability is achieved with hygroscopic surfaces. Suitable for fixing decor.
• “Moment Montage. Waterproof." It belongs to moisture-resistant products of class D. This is a universal composition marked MB-40. They can firmly glue any materials.
• "Super strong MVP 70. Transparent." Due to the gripping force of 70 kg/m. sq. quickly glues any materials. Typically, wall panels and interior design elements are mounted on it. There is also a white composition.
• "Superstrong Lux MV-100." It has the qualities of the previous brand, but its adhesion force is 100 kg/m. sq. To glue heavy elements to them, there is no need to use supports or clamps.
• “Extra-strong MP-55.” It is made on the basis of rubber. They can be used to glue heavy objects of any texture. After application, it forms a thin film that is dry to the touch, protecting the bonded surface from contamination. The strongest adhesion occurs at the first contact of the surfaces during the destruction of the protective shell, so it is not recommended to move the working elements after bonding.
• "Universal MP-40." Based on synthetic rubber. It is easy to wash off. You can glue fiberboard, concrete, marble masonry, natural stone, polystyrene panels, glass and fiberglass. Reliable and quick to engage. Can be stored at low temperatures down to -20 °C.
• "Installation moment for MP-35 panels." You can glue polystyrene and foam panels. The characteristics are similar to the “Universal MP-40” brand, it is just as durable, but can be easily washed off until completely cured.
• "Instant Grip MP-90." Designed for quick gluing of materials that do not absorb moisture. You can fasten polystyrene, foam, brick, plywood and stone bases.
• "Transparent combat MF-80." The base is Flextec polymer. The glue is characterized by fast setting and can be used as a sealant. Colorless, solvent-free. Smooth, non-absorbent materials can be joined.
• “Moment Fix. Universal", "Expert". Fixes almost instantly, has a coupling force of 40 kg/m. sq. Used for indoor work only. Between uses, the composition must be kept closed to prevent a film from forming. You can install ceiling slabs, floor moldings, wood and metal decor, sockets, wooden wall panels and fill small gaps up to 10 mm deep.
• “Moment Montage. Polymeric". It has an acrylic-water dispersed composition and has excellent adhesive properties. Can be used to fill deep cracks and becomes colorless after drying. Bonds paper, cardboard, foam plastic, wood, polystyrene foam surfaces, parquet mosaic and PVC. Release form: bottles.

Basic principles of installing slabs using liquid nails

1. Before gluing to a fresh concrete base, you must wait a month for the moisture to completely evaporate, as well as other substances that are released during the hardening process.
2. The painted base must first be sanded to remove the gloss. Then just install the PVC panels.
3. “Moment” assembly adhesive should be applied with constant pressure, in a strip in the shape of a snake or straight lines along the perimeter of the slab with a distance of approximately 2 cm from the edge.
4. Rubber glue sets within a quarter of an hour. Therefore, when using it, a rapid evaporation operation should be carried out, then the tile is installed in place and pressed tightly mechanically (using a screed, brackets). After a day, the clamps can be removed.

Moment liquid nails adhesive is a simple and convenient replacement and addition to the traditional mechanical method of fastening products and parts during construction and finishing work indoors and outdoors. Due to the absence of metal fasteners, the finished structure looks neat and harmonious. Moment Montage adhesive is one of the most popular and affordable of all similar materials.

Adhesives Moment Installation based on synthetic resins

These mixtures are produced by the company's factories located in the United States. Composition Extra-strong MP-55 contains phenol and aliphatic hydrocarbons, so be sure to follow safety precautions, as the composition is flammable and the vapors are hazardous to health. Suitable for quick and durable gluing of any materials and their combinations, however, due to the solvents contained in the composition, it is not used when working with polystyrene foam.

Due to the above characteristics, the main area of ​​application of the glue is outdoor work. It is also used for installation of facing panels and tiles. The adhesive strength increases as the glue polymerizes. Primary – 55 kg/m², final – 70 kg/m². Available in tubes of 423 g.

Extra-strong MP-55

Variety of adhesives Moment

The composition of adhesive mixtures determines their properties and purpose. The basis of 90% of adhesives is synthetic polymers or prepolymers. The company produces and uses all modern polymers: acrylates, resins, polyurethanes, silicones, polyvinyl acetates, silane-modified polymers, synthetic rubbers. One adhesive may contain mixtures of two or more polymers, which improves the properties of the composition.

Moment single-base and double-base adhesives are available. The adhesive base hardens when exposed to atmospheric components, when the solvent evaporates, or when a hardener or catalyst is added. In this case, the glue kit includes two tubes.

Variety of products Moment

An important distinguishing feature of adhesive mixtures is the type of solvent. The safety features when using a particular brand of glue depend on it. The company pays great attention to the development of technologies for environmentally friendly and safe compositions based on polyacrylates, which are produced in the form of aqueous dispersions.

Among the other characteristics by which Moment brand products are classified are the physical state of the adhesive mass, curing speed, adhesiveness, and water resistance of the resulting compound.

Moment adhesives are packaged in containers of various sizes. This way you can purchase the required amount of material and fully use the contents before polymerization begins inside the tube.

The Henkel company produces household and construction universal adhesives. Moment Montazh adhesive mixtures are widely used in construction.

Moment Installation adhesives, or liquid nails, are produced on the basis of polyacrylate (MB marking), polyurethane prepolymers (MF), synthetic resins (MP marking), silane polymers (MS).

Principle of operation

To get started, you need to install the tube (the container in which the glue or sealant is located) into the gun body. To do this, press the lever and pull out the piston. Then, insert the tube into the free space and press the rod all the way, while simultaneously holding the rear lever with your finger. After this, we cut the tip at an angle of 45 degrees and begin gluing.

The operating principle of the pistol is very simple. When the trigger (rear lever) is pressed, the rod moves and squeezes the glue out of the gun. The glue comes out of the tip of the device. After finishing work, close the tip with a cap and hide the device until next time.

The photo shows a liquid nail gun

Instructions for use

During work, you must follow safety rules.

Before starting gluing work, you need to clean the surfaces from dirt and foreign objects, sand them, then degrease them. The materials to be bonded must be at room temperature.

The optimal air temperature for work is +10 °C and above. Some types of polymer adhesives can be used at subzero temperatures.

If the glue is in the form of a cartridge, then before use you need to cut off the protective seal and put on the cap. The end of the cap is cut at an angle of 45° to the desired diameter.

Next, the cartridge is installed in the construction gun: press the locking tab, pull the rod towards you, insert the cartridge into the gun body, push the rod back until the disk stops at the bottom of the cylinder.

Make several idle trigger presses until the glue starts to come out. To stop feeding, press the locking tab. This movement reduces the pressure of the compound inside the cartridge.

General terms of delivery and pickup:

— At the moment, self-pickup is not available!

— when paying on the spot, payment for products occurs before the machine is unloaded (deposit);

— in case of partial or complete refusal of high-quality and paid for products at the time of delivery, the funds are returned to the buyer in proportion to the reduction in the cost of the order;

— when ordering goods according to an individual size or with cutting to an individual size (linoleum, gypsum board, plywood, cable, rolled metal, etc.), 100% prepayment of the order is made, refusal of quality goods sold by the meter, as well as goods manufactured Custom size is not possible;

— delivery is carried out daily from 9-00 to 18-00;

— the cost of delivery does not include unloading, lifting, as well as cutting and sawing of materials;

— unloading time is limited depending on the weight of the cargo;

— delivery is carried out to the place where the car can travel without violating traffic rules and risking damage to the vehicle;

— pick-up is carried out only after prior agreement with the manager of the online store;

— large-sized material (insulation, barrels, etc.) is calculated based on the cubic capacity of the cargo;

— additional requirements for the car, for example, a small height for entering a parking lot or an open body for vertical unloading, are paid additionally: + 25% of the cost of the standard tariff.

Cost of loading and unloading and lifting to the floor

Multiline phone

Delivery to Russian regions:

— delivery to Russian regions is carried out through the transport company SDEK and PEK 2 times a week;

— goods are shipped to the transport company only after 100% payment for the order;

— transport company services are fully paid by the buyer upon receipt;

— delivery to shopping centers SDEK and PEK 500 rub.

— return of goods of proper quality through TC is carried out at the expense of the Buyer.

Opening hours:

Monday-Saturday: from 8:00 to 19:00

Mode of application

The gluing instructions are useful for those new to installation.

When using the composition, they are guided by the principle of surface cleanliness. The part and base are clean before and after work. At regular intervals, cleaning must be done in different ways.

Preparing the base

The following operations are carried out with the base:

• Cleaning. Depending on the surface, rags, brushes, wet washing, and detergents are used.
• Drying. Relevant both when using water (washing detergents) for cleaning and without. A dried base will ensure good adhesion.
• Processing with sandpaper. Roughness significantly increases the bonding strength. Therefore, if possible (when the base is wooden, from a material of similar strength), sandpaper processing is performed, after which the base is roughened.

When the surface is ready, apply the adhesive mass. From a tube or dispensing syringe, apply an equal amount in strips along the edges, a spot amount in the center of gravity or along the entire perimeter of the adhesive element.

Cleaning the surface of excess glue

After the mass is distributed over the part, pressing is performed. In the marked place on the base, first press the corner, then the entire element.

“Express” only needs a few minutes until it sets completely. The final cleaning work is carried out after a few hours. Excess is removed using spatulas and a damp, soapy cloth. Handle the rag carefully so as not to dislodge the fresh adhesive.

"Montazh Express" is an excellent replacement for dowels, nails, screws and other fasteners that spoil the interior aesthetics of the house.

Types and purposes of the composition

Liquid nails are divided into several types, depending on the polymer composition. A mixture labeled “Instant Contract” is considered universal. This glue can be used for almost any task. It firmly bonds parts made of metal, ceramics, plastic, wood, and PVC panels in five minutes. To perform specialized work, there are the following varieties:

• “Express decor” - used for joining wood, plastic and PVC. Most often used for fastening cornices and baguettes;

• Liquid nails “For mirrors” are indispensable for fixing mirror panels and mirror tiles on any surfaces (some types of glue can damage amalgam, so it is important to attach mirrors using a specialized compound);
• “Super strong” - used for fastening wall panels made of plastic and PVC (may have differences in transparency and are intended for outdoor use);
• “Express” and “Very Strong” - used for external work on facing stone and any types of ceramic tiles.

It is convenient, for example, to attach bamboo wallpaper to this adhesive mixture, and there is no need to clean and prepare the surface in any special way. It is only necessary to remove the chalk or loose plaster.

It is convenient to attach tiles using liquid nails, and this installation option is considered more durable than traditional tile adhesive. The only negative is that liquid nails are more expensive and their use is only justified for repairing and replacing ceramic tiles.

To attach PVC panels, you need to choose a transparent glue that will not leave marks when dry.

Pros and cons of using

Comparing this material with other adhesives that are suitable for construction and repair, we can highlight the following pros and cons of their use.

Attention!

The service life of such glue rarely exceeds 12 months.

The best brands of glue - selecting the composition for certain materials

Of course, useful tips for using the adhesive can be read on its packaging. But what if you come to the store and you need to choose an adhesive that is optimal for a specific material. Not all sellers are competent in such matters. Therefore, it is worth considering the highest quality compounds that have proven themselves in certain cases.

One of the most popular compositions among buyers is Extra-Strength Moment Installation produced by Henkel. This is a good glue that is suitable for fixing heavy types of facing materials: natural stone, wood, metal siding. But if you use materials such as polystyrene for your work, then this glue will not suit you. In such situations, it is worth buying the Superstrong Moment Installation composition, made on a water basis. Do not forget that liquid nails of this type are not suitable for Teflon and polyethylene.

For work inside the house, composition LN601 from the manufacturer Macco is unrivaled. This neoprene backed adhesive is great for many construction and renovation jobs. It glues plywood, natural wood, chipboard, metal and plastic moldings equally well. However, this composition will not be able to cope with the installation of ceramic tiles and mirrors. Because of this, there is no point in buying it for bathroom renovation.

Another glue that will become a reliable assistant in repairs and construction is the Multi-Purpose composition of the Russian company Titebond. It is also made on a neoprene base and is suitable for wall cladding with metal, plastic, wood, fibreboard, chipboard and ceramics. Thanks to its good adhesion to brick and concrete walls, this adhesive will hold even the heaviest finishes. The only area where such liquid nails are not used is swimming pools. In addition, it is not suitable for working with polystyrene.

Experts often have their own opinions about what glue can be used when working with certain materials. Based on the words of the pros, water-soluble, quick-drying compounds Titan WB-50 or Solvent Free are ideal for installing ceramics. They withstand light vibrations and moisture very well. For the purpose of gluing mirrors, adhesives that do not contain substances that dissolve amalgam will be optimal. Among them, it is worth highlighting LN-930 and Zigger 93. When renovating a bathroom, it is recommended to use compounds with increased resistance to moisture. Among these, Nail Power and Tub Surround stand out.

Source: obustroen.ru

How long does liquid nails take to dry? Installation time

What it is

When purchasing liquid nails, not everyone reads the instructions for use. The material is so widespread and accessible that it seems that there are no surprises to be expected from it. But this is not so, since the general name hides several solutions with different characteristics. In the original version, the glue consisted of artificial rubber with the addition of polymers.

When it first appeared, especially plastic clay, which was mined in Texas, was used as a fine filler. Since such raw materials could only be used in America, and the adhesive composition turned out to be successful, experiments began with other additives. Thanks to this, many varieties of the product appeared, but the name remained.

Instagram positive_magazin_krasok

The range of liquid nails is very wide. The general name hides several solutions with different characteristics.

How long does it take to dry liquid nails during installation - Apartment renovation

Liquid nails are a type of construction adhesive intended for joining homogeneous and dissimilar materials and capable of withstanding quite large loads. This product got its name from the American brand Liquid Nails (translated from English as liquid nails), created back in 1968 by Macco.

The development appeared on the domestic market in the mid-nineties and since then has been an indispensable assistant in the professional field. Liquid nails have also been used in everyday life. True, without knowing how to use liquid nails, you can seriously damage the surfaces being treated. Therefore, it is imperative to study what the material is and what the technology for working with it is. It would also be useful to know how to wash liquid nails if something suddenly goes wrong.

Table of contents

1. Composition of liquid nails
2. Types of liquid nails
3. What are they for?
4. Subtleties of choice
5. Liquid nails: instructions
6. Special pistol
7. How to remove liquid nails?

Composition of liquid nails

The basis of the “mixture” is synthetic rubber and various polymers.

In the classic version of the “product,” the filler is a special clay with increased plasticity. It is mined in the USA, in the state of Texas. Here, in fact, the key production capacities of “local” manufacturers of liquid nails are concentrated.

A number of developers use calcium carbonate instead of “miracle clay” (in simple terms, just ordinary chalk). According to many experts, this does not have the best effect on the strength characteristics of the product.

What is it used for?

Recommended uses include a variety of products including wood, silicate glass, ceramics, organic glass, aluminum alloys, natural cork, plasterboard, foam polymers, siding, wood fiber boards or shavings.

High-strength adhesives can be used to secure sinks and other plumbing fixtures, window and door frames, baseboards, countertops and mirrors. Sometimes craftsmen use liquid nails instead of sealants; they are used to insulate seams, fill microcavities, cracks in walls, ventilation ducts, and corner joints of design structures.

Extrusion from a gun

For a large amount of work, it makes sense to use a special gun, which will reduce product consumption and facilitate the application procedure. The principle of operation of pistol devices is similar to syringes; the entire body or half of the tube body can be inserted into the pumping structure; sometimes it looks like a skeleton on which a packaging container with glue is fixed.

The easy-to-use models feature reverse motion, which significantly speeds up gluing, which is especially important in industrial environments. When constantly performing large volumes of work with adhesives, it makes sense to use a gun that runs on electricity.

The technical features of the units are indicated in the accompanying instructions, the reading of which should not be neglected.

Polyurethane compounds

All polyurethane universal mounting mixtures do not contain cyanide. Used both as an adhesive and as a sealant. Like all polyurethane prepolymers, they harden when exposed to water. After drying, they retain elasticity, which is important when installing moving structures or gluing materials that are subject to vibration during operation.

It is allowed to use these compounds in outdoor work, as they are not afraid of ultraviolet radiation. Used for gluing all types of materials, except polyethylene. They have restrictions in temperature conditions for storage and work (+5-+40 °C).

The Henkel company produces polyurethane universal liquid nails Moment Transparent Grip MF-80. Bonding strength – 80 kg/m². It is a transparent viscous mass with a characteristic odor in tubes weighing 300 g.

Liquid Nails Transparent Grip MF-80

Polyurethane liquid nails cannot be frozen before use.

Specifications

The main features of Moment Montazh liquid nails from the rubber family include the following:

• the composition contains harmful volatile substances, hence the pungent odor; When working, it is recommended to ensure good ventilation of the room;
• has high moisture resistance and frost resistance (up to -40°C);
• it is an installation material, but can also be used as a sealant;
• works with almost all materials;

• better than acrylates for gluing smooth and non-moisture-absorbing surfaces;
• some species have instantaneous grip;
• storage temperature ranges from -20 to +30°C (after defrosting it completely restores its properties);
• shelf life – 18–24 months;
• sold both in cartridges and in tubes, weighing 125–400 g;

• operating temperature – from -12 to +35°C;
• working time – 10–30 minutes (depending on the type of glue);
• setting occurs after 24 hours; complete drying time depends on the external temperature and air circulation, but no more than 7 days;
• cleaned with white spirit;
• Most adhesives are beige in color.

The technical characteristics of water-based adhesive mixtures are as follows:

• no pungent odor;
• waterproof and frost-resistant (down to -20°C);
• suitable for installation of a wide variety of materials;
• the surface must absorb moisture;
• storage temperature – from +5 to +30°C;

• shelf life – 18 months;
• Available in the form of a cartridge and tube, weighing from 125 to 400 g;
• can be used for interior and exterior work;
• working time of glue – from 5 to 15 minutes;

• painting is possible after drying (it is recommended to use acrylic paints);
• high initial grip strength;
• excess unhardened mixture can be easily removed with a damp cloth;
• The color of the glue is white, some become transparent after drying.

Application

Glue liquid nails "Moment Installation" should be used in accordance with the instructions, do not forget about safety rules when working.

When gluing, you need to be guided by the following principles:

• Pre-prepare and clean the work surface and degrease it.
• The operating temperature should be approximately 10°C, including at the work surfaces.
• You need to apply glue to one of the selected bases, choosing the optimal method for this: dotted, in the form of wavy lines or a straight strip.
• After fastening, you need to fix the base for 10-15 minutes. To avoid holding with your hands, use masking tape or special fasteners.

Advice! If it is necessary to carry out high-quality sealing of seams no more than 2 cm wide, you can use Moment Installation liquid nails.

It is necessary to follow safety rules, since the work is carried out with a highly flammable substance. It is necessary to exclude the presence of open flame sources and protect the respiratory system during work.

Liquid nails “Moment installation”: application features (2 videos)

Liquid nails “Moment installation”: varieties (15 photos)

Universal mounting mixtures based on polyacrylates

All these mixtures have a common property - odorlessness and anti-allergic qualities. Compositions of this type are not intended for gluing Teflon and polyethylene. To obtain a strong connection, it is advisable to use compounds for gluing two surfaces, one of which is capable of absorbing glue. They have similar areas of application and shelf life (18 months). They differ in packaging volume and speed of initial setting.

The compositions are available in white or transparent. This depends on the type of polyacrylate isomers used in the mixture. Information about color is already contained in the names of this or that product in this series.

Installation Superstrong MVP-70 is a white pasty mass. Available in tubes for a plunger gun weighing 400 g. It has a high degree of initial setting (70 kg/m²). The time before intensive polymerization begins after application to the surface is up to 15 minutes.

Superstrong adhesive MVP-70 is used for gluing wood (wall panels), ceramics, foam plastic (curly ceiling cornices, baguettes). It can withstand heavy loads, so it can even be used to glue heavy solid wood panels. Moment Superstrong MVP-70 can be used both for interior work and outdoors. This glue does not decompose or depolymerize over time.

The Henkel company produces acrylic adhesive Superstrong Plus with increased primary strength, up to 100 kg/m². The manufacturer allows the possibility of using this composition for installing door blocks.

Moment Superstrong Plus MV-100

Compositions Express MV-50, Express Decor MV-45 are specially designed for finishing work. With their help, you can quickly install friezes, baseboards, and other decor. The initial adhesion force of the compounds is lower (45 kg/m²), so they are used for gluing light objects. Available in 250 g tubes or 450 g cartridges.

Express Decor

What does assembly adhesive consist of?

The glue is able to interact with the material of the working surfaces, so it can easily damage it. This property depends on the type of solvent included in the mixture. Mounting adhesive “Moment” is divided into two types:

1. Based on synthetic resins. These liquid nails contain organic solvents, which gives them a pungent odor. They react with plastic, which means they are not used for gluing foam or PVC parts. The packaging always bears the designation “MR”. The connections obtained using these adhesives are characterized by high strength and increased resistance to moisture. This type of liquid nails is highly flammable.
2. Based on polyacrylate-water dispersion. These liquid nails on the packaging contain o. Their composition is chemically neutral, so they are used for interior decoration. They are usually used to secure baseboards, baguettes or PVC tiles.

Advice! If the technical description says that the adhesive contains polyvinyl acetate or polyacrylate-water dispersion, then it is suitable for processing PVC.

How to remove protruding adhesive

When working with glue, it may get on the front part of the parts being fastened. In this case, the drops must be quickly wiped away. It is better to do this with a cloth soaked in a solvent containing acetone. It is suitable for all types of liquid nails, but still gives a subtle result, so do not over-tighten. If the composition has already dried, then the solvent will only help in conjunction with mechanical cleaning. A good result is obtained by heating the frozen glue using a regular or construction hair dryer. When the surface temperature rises to 50-60C, the nails become softer, which makes them easier to tear off.

If liquid nails get on your clothes, this does not mean that you have to throw them away. Anti-glue can be used to clean fabric. Although on glued objects, where glue is used in a thick layer, this solvent is ineffective, but on clothing it can often cope with the task. The disadvantage of this method is the ability to change the shade of the fabric. For sensitive items, it is better to first warm up the nails with a hairdryer or iron, and then put the clothes in the freezer. As a result of a sudden change in conditions, the glue will lose its properties. Once frozen, it will be possible to peel it off. This is a good method, but it is ineffective on knitted items.

If you need to clean your hands that are stained with acrylic-based glue, you just need to wash them with soap. Formulations with artificial rubber are washed off the skin with Vaseline or vegetable oil. Considering all the difficulties with cleaning, it is much easier when using liquid nails to protect the edges of the parts with masking tape, so as not to have to scrub anything off later.

How to use?

Liquid nails are very often used during installation. Despite the fact that working with them is relatively simple, you still need to follow a few rules.

For example, you should remember that glue is applied only to a clean, dry surface. In addition, after spreading the solution, you must press the parts tightly in the desired position for 2 minutes.

You should also remember that the glue is applied in strips or dots. In this case, there is no need to spread the composition over the entire surface; gluing will be good without it.

Drying usually takes about 12 hours, but it can last 18 hours or a day - it depends on the brand and manufacturer. It is better not to touch the structure while it is drying.

If the gluing elements are quite heavy, then it is advisable to wait a week, then the glue will dry completely and will be able to completely hold the structure.

The composition is needed for gluing parts in difficult places.

We should not forget that nails based on organic compounds are quite dangerous - you should not allow the composition to come into contact with the skin. The glue must be applied with a special gun.

In stores, liquid nails can be found in the form of cartridges, which helps to use the adhesive solution in doses and save money. At the same time, the shelf life of the composition is quite long.

However, everyone has situations when they need to not only apply glue, but also remove it. High-strength adhesive mortar is especially difficult to remove.

To remove newly applied liquid nail, you should try washing it off with water and solvent. You can use a regular sponge for this.

However, this option is not yet the most difficult, since the composition has not yet had time to dry. If the glue has already dried, you will have to wash it off with special substances that are available in stores.

Video:

However, not everyone has strong solvents on hand. For such cases, the use of a conventional scraper is indicated. You just need to work with it very carefully so as not to spoil anything.

You can try to heat the frozen glue. In this case, the mass will become liquid and viscous, it can be easily washed off, you just have to heat it up to 60 degrees.

Many people still have the question of how to properly use a nail gun. This is also quite simple - you need to press the metal tongue of the gun, then pull the piston in your direction, which will make room for the adhesive solution.

After fixing the cylinder, you need to press the piston back, and then you can squeeze out the nails by pumping the trigger.

Some people don't know how to open a tube of solution. This question is often asked by beginners, but in fact there is nothing complicated here.

Video:

The tube is either sealed - then you need to open it with a knife, or you just need to pierce it from the top if the container is tin. It is best to pierce with a nail, because there is a protective film inside.

Kinds

The Moment Montazh line includes about sixteen products. Depending on the materials and complexity of the work to be done, you can easily select the most suitable adhesive composition. It is determined by the corresponding markings (MV and MR). The numbers next to them indicate the initial setting force (kg/m²).

“Moment Installation – Express” MV-50 is used for all types of work. It is solvent-free, moisture-resistant and suitable for the installation of wood, PVC and insulation panels. It can be used to attach baseboards, door frames and decorative elements.

• “One for everything. Transparent" has the same properties as Superstrong. It is often used for urgent sealing of seams under water, but is not suitable for permanent immersion. It has a shorter shelf life, only 15 months.
• “Moment Installation – Express” MV-50 and “Decor” MV-45 are distinguished by quick gluing and are used for fastening decorative elements made of various materials. The best adhesion will be with hygroscopic surfaces.
• “Moment Montage. Waterproof" MV-40 is characterized by resistance to moisture of class D2 and versatility, providing strong bonding of any materials.

• “Moment Montage. Superstrong" MVP-70 Transparent glues quickly enough, with a load of up to 70 kg/m². It is used for mounting wall panels and decorative elements. The Superstrong MV-70 is available for sale in white.
• “Moment Montage. Superstrong Plus MV-100 has the same technical characteristics as Superstrong MV-70, only the gripping force is much greater - 100 kg/m². To fasten heavy elements, it does not require supports or clamps.
• “Moment Montage. Extra-strong "MR-55 is made from rubber, is suitable for heavy structures, and holds any materials together.

• “Moment Montage. “Universal” MP-40 is based on synthetic rubber and is easily washed off. It is suitable for fastening fiberboards, concrete walls, marble or natural stone masonry, polystyrene bath panels, fiberglass, glass surfaces. Glues quickly and is reliable. Can be stored at sub-zero temperatures down to -20 degrees.
• “Moment Installation for panels” MP-35 is specially designed for fastening polystyrene or foam panels. It holds the same materials as Universal MP-40, is durable, but is easily washed off before it hardens.

• “Moment Montage. Instant grip" MP-90 grips perfectly from the first minutes of use and glues surfaces that do not absorb moisture. It perfectly holds polystyrene, foam, brick, plywood and stone together.
• “Moment Montage. Transparent grip" MF-80 is made on the basis of Flextec polymer and sets quickly. Can be used as a sealant, is transparent and solvent free. It is suitable for smooth, non-absorbent surfaces.

• “Moment Fix. Universal" and "Expert". Fixation is almost instantaneous, the adhesive force is 40 kg/m². Used for indoor work only. If glue is not used, it must be kept closed, as it quickly forms a film. It is intended for the installation of ceiling slabs, floor skirting boards, wooden and metal decorative elements, sockets, wooden wall panels, as well as for filling gaps up to 1 cm.
• “Moment Montage. Polymer adhesive is a composition based on acrylic water dispersion and is not liquid nails. It has excellent adhesion, becomes transparent when dry, and is used to fill deep cracks. They can glue paper, cardboard, polystyrene foam, wood, parquet mosaic, polystyrene foam, PVC. Available in bottles.

Purpose

Construction adhesive “Moment Installation” is used for the following purposes:

• for installing mirror bases on different planes;
• for attaching PVC panels;
• to attach shelves and decorative structures to any base;
• for fastening tiles.

Waterproof, which allows it to be used in conditions of excessive dampness. They can be used to glue tiles or mirrors in bathrooms, showers, swimming pools, kitchens, etc.

Specifications

The attractiveness of the MV-50 in the construction market is due to positive reviews based on the following important characteristics:

• Moisture resistance. It has the ability not to absorb moisture in contact with the frozen surface. To preserve the ability, it is advisable not to dilute the glue with water.
• Frost resistance. The holding capacity does not disappear due to freezing, which allows you to not worry about temperature changes. The glued elements will not fall or be damaged.
• Does not require solvent. With proper transportation and closing at the end of use, the “express” does not harden, so “liquefaction” of the adhesive composition is not required. The thickening mass is suitable for use, or mixing with “fresh” is allowed.
• Rapidity. The presented “liquid nails” set at high speed, which means that energy is saved - there is no need to hold the element to be glued or wait for it to set.

Please note that one of the surfaces (which is glued or glued to) necessarily absorbs moisture. Otherwise, adhesion is low, which will either prevent the elements from gluing together or make the fastening weak

The composition is suitable for use at temperatures from 5 degrees above zero Celsius.

Composition of liquid nails

Their chemical composition is of great importance for the work and use of liquid nails. The composition of the adhesive determines its characteristics and application.

Water-soluble or polymer nails are made from polyurethane or acrylic. More often in their name you will see the adjective “acrylic”. These compounds do not smell, excess is easily washed off with warm water, tools and hands are easy to wash, they do not burn. However, acrylic liquid nails are afraid of water, humidity, frost and cannot be applied in a large layer.

Related article: Modern materials for waterproofing

Adhesives based on synthetic binders, rubber or resin, form a strong crystal lattice, even when applied in a thick layer. However, such adhesives have a strong smell and can only be washed off with solvents. It is unlikely that you will set them on fire, but they burn well, although they are not afraid of frost.

How to choose liquid nails - an overview of popular options

When choosing glue, first of all pay attention to the following factors:

• processed material;
• load on adhesive seams;
• operating conditions (outdoor or indoor).

Today, there are many different manufacturers and variations of liquid nails that can be easily found on the market or in a building materials store. However, they all differ not only in the brand and country of manufacture, but also in quality and final result.

The most popular and frequently used liquid nails, which are preferred by most professionals, are Moment, Titebond, Makrofix, TYTAN, Krass, Kim Tec, Quadro and others.

Let's take a closer look at popular brands that have had a good reputation for many years.

How to work

Liquid nails are sold in tubes or special tubes. To work with tubes, you need to purchase a special construction gun for sealant (that’s what sellers call them).

Tool

There are sealant guns:

• Open, semi-case and case (closed);
• Mechanical and pneumonic.

The most acceptable option for use in household repairs is a semi-body mechanical gun.

Related article: Kitchen renovation from a photo: analysis of an 8-meter kitchen renovation in a panel house

It is more convenient to work with a closed mechanical gun.

Before applying liquid nails, you must prepare the surface. Remove dirt, dust, and old sealant.

If you work with metal, be sure to remove rust and also degrease the material.

The glue is applied to one or both surfaces (read the instructions on the package). The glue is applied dotwise, in a snake or in stripes.

The thickness of application depends on the type of glue chosen. Let me remind you that water-based adhesives cannot be applied in a thick layer.

Typically, glue is applied to the product being glued. When gluing, for example, an apron wall panel to a kitchen wall, the apron is gently pressed against the wall. Displacement of the apron along the wall is unacceptable.

Liquid nails set, usually in 10-15 minutes, but there are options for 40 minute setting. While the nails are setting, it is better to press the product to the surface. It is enough to press the product with your hands for 2-3 minutes, then place emphasis or press it with a load.

It is especially important to press down on a product that is glued to the ceiling, such as ceiling tiles.

Adhesives dry within 12-24 hours. Manufacturers indicate a more precise period required for drying on the packaging or in the instructions for this product.

A large number of brands of liquid nails with basic and additional properties force us to give advice:

How to use glue

During work, you must follow safety rules.

The principles of working with “Moment Montage” will be as follows.

• Before starting gluing work, you need to clean the surfaces from dirt and foreign objects, sand them, then degrease them. The materials to be bonded must be at room temperature. The optimal air temperature for work is +10 °C and above. Some types of polymer adhesives can be used at subzero temperatures.
• If the glue is in the form of a cartridge, then before use you need to cut off the protective seal and put on the cap. The end of the cap is cut at an angle of 45° to the desired diameter. Next, the cartridge is installed in the construction gun: press the locking tab, pull the rod towards you, insert the cartridge into the gun body, push the rod back until the disk stops at the bottom of the cylinder. Make several idle trigger presses until the glue starts to come out. To stop feeding, press the locking tab. This movement reduces the pressure of the compound inside the cartridge.
• The glue is applied to one of the planes to be glued. This can be done in several ways. If uneven areas are glued, then the composition is applied pointwise. The dots have a size of 20 by 20 mm, applied every 0.2-0.3 mm. When you need to glue tiles or other materials of a small area, the glue is applied in waves, which enhances the primary adhesion. When gluing skirting boards and other narrow, long decorative elements, liquid nails are applied in a continuous strip. When the surface area is too large, a roller may be needed; it can be used to apply glue to even, smooth materials. A trowel is used to create greater surface contact and instant holding power. Using a notched trowel with a notch depth of 6 mm, the glue is evenly distributed over the material, with a distance of 2.5 cm from the edges.
• After application, the object is pressed tightly and fixed for a quarter of an hour. In order not to hold the element with your hands, you can secure it with masking tape or special fasteners until the glue dries completely.
• To prevent the adhesive from going beyond the joint, it can be limited by placing a toothpick on top.
• If the excess still protrudes beyond the seam, then the acrylic composition is dissolved by ordinary water, so it can be removed with a damp cloth, and white spirit will help to dissolve synthetic-based liquid nails. Excess glue is removed from porous surfaces after drying by careful cutting.

When you need to glue materials with low moisture absorption ability:

• the glue cannot be applied in a continuous layer, since in order to dry it needs to be in contact with air or ensure the presence of moisture;
• sometimes you need to apply glue first, and then after 5-10 minutes. separate the elements so the solvent can evaporate. Only after this can the parts be pressed tightly and secured.

Construction adhesive can be used as a sealant for joints up to 20 mm wide. It is necessary to carefully fill all cavities and press down the side surfaces tightly.

The average consumption of the product is 0.2-0.4 kg/m. sq. Synthetic compounds are characterized by rapid flammability, so it is better not to use near fire and not to smoke while working.

It is better to carry out gluing in a respirator, since toxic fumes from synthetic nails can cause harm to health.

Unused composition should be stored in a closed condition. Empty containers of liquid nails are disposed of as household waste. Do not allow any glue residue to enter the drain.

About liquid nails

Using liquid nails, you can connect a variety of materials, for example, wood, plastic, glass or drywall, ceramic tiles.

In kitchen renovations, liquid nails are most often used for gluing kitchen panels above the kitchen work surface, as well as when installing a new window sill and other installation work.

pros

Using liquid nails to fasten something, as opposed to using mechanical fasteners, has a number of advantages:

• First of all, it's fast;
• Secondly, there is no need to damage the mounting surface and the product itself;
• Thirdly, no additional tool (drill, hammer drill) is needed for fastening;
• Fourthly, liquid nails can be used to fasten products that are not fastened with screws. For example, mirrors or a glass apron for the kitchen.

Minuses

Liquid nails have negative qualities that you need to know about:

• First of all, they are not transparent;
• Secondly, liquid nails take a relatively long time to dry and the product must be held on the surface while it sets;
• Thirdly, when dry, visible residues of liquid nails begin to turn yellow.

No. 1. How long does it take for Moment Installation liquid nails to dry?

In the modern world, so-called liquid nails have gained particular popularity. It is worth noting that this installation material is a special construction homogeneous or heterogeneous adhesive, which is designed to connect together several surfaces of homogeneous or different types, and this is done with one click of the hand.

Nails of this type can withstand increased loads, and they have been widely used in everyday life since the early nineties. Particularly popular in our country are liquid nails of the Moment brand. The fact is that they do not spoil surfaces and act about ten times better than the usual PVA.

How to choose the right liquid nails and where to use them

To understand how long it takes for Moment liquid nails to dry, you need to decide what they will be intended for. For example, there are options that glue wood and ceramics, plastic and metal parts, but they will also dry differently.

You cannot connect rubber and vinyl products, as well as artificial stones, using this type of nails.

Liquid nails are divided into several types:

• neoprene - based on organic solvents, which have a pungent odor;
• acrylic - water-based, which do not have a special odor.

Thus, these nails are analogous to dowels and connect literally everything. It is worth immediately understanding how to use glue correctly in order to achieve the best results. To understand what needs to be done, you need to read the instructions included with the specific type of liquid nails.

For each type of building material, the liquid version of nails is selected separately, but the surface must be treated the same, since it should be cleaned and dried as much as possible. Only after this, “Moment” nails are applied in liquid form with a spatula, or using a large special mounting gun.

Advantages of liquid nails "Moment"

The main advantages of the liquid nail product include:

• high level of adhesion, that is, the ability to connect different surfaces;
• Liquid nails will not dry instantly, so there is the possibility of repeatedly changing the position of the parts;
• excellent composition of building materials, which ensures their safety for the health and life of consumers;
• resistance to frost and high humidity;
• resistance to vibration and friction;
• resistance to many types of fungi and mold;
• not subject to combustion;
• does not have increased toxicity.

Gluing any other surfaces, parts or elements to a high ceiling is a pleasure. It is worth noting that to fully realize the benefits of liquid nails, you should pay attention to their characteristics.

Liquid nails, which are based on polyurethane, will not be able to glue Teflon and polyethylene, and acrylic nails can only connect porous materials.

How long will Moment liquid nails take to dry?

The characteristics of liquid nails will determine the rules for working with them and the period during which they will dry. You should work with the acrylic version only in a ventilated area, and also away from open sources of fire.

For most types of nails, it is important that they are stored at the correct temperature, from five to twenty-five degrees Celsius, and the package should not be stored open for more than a year.

When asking how long liquid nails will dry, it is necessary to distinguish between the time of setting and complete polymerization. Grasping, that is, the time when the object will hold on its own, is under different conditions from fifteen minutes to half an hour.

To clarify how long it takes for a regular liquid nail “Moment” to dry before complete polymerization, you need to refer to the instructions; as a rule, this process takes no more than twelve hours or a couple of days. After this, the glued object is able to withstand pressure of at least eighty kilograms per square centimeter.

The characteristics of quick-drying options allow it to completely polymerize in just twenty or forty minutes, but the negative side is that it will no longer be possible to change the position of the part. It is worth noting that in order for liquid nails to set and dry correctly, they must be used correctly, namely, squeeze out a strip of about seven millimeters in diameter. At the same time, you can be completely confident that it will dry on time and the consumption will be more than ten linear meters.

In order to prevent liquid nails from damaging the object when drying, you must follow a number of rules. For example, a mirror surface will first have to be coated with varnish on the back side so that it does not deteriorate from the glue. By the way, you can select special liquid nails for mirrors in the Momenta line.

infoforemontik.ru