How to open a plastic window without a handle from the inside

Plastic windows are an indispensable attribute of construction in the modern world. They are easy to use and maintain. However, a person encountering this architectural detail for the first time may experience some difficulties when opening or closing it. To effectively use all the capabilities of new products, you need to know how to properly open plastic windows with a handle.

Handle – protection against inadvertent opening

The principle of operation of a metal-plastic window

The following are the most common causes of breakdowns of such windows, as well as options for their repair:

Part jammed
No lubrication
The window sash is sagging
The glass unit is not in place
The window handle itself is broken

You can do without radical methods

If a mechanism stops and cannot continue to work, all is not lost - the window can be fixed.

If a special blocker, so called because of its special purpose, has been triggered, you need to unblock it.

Most likely, it is designed to protect the mechanism and the glass unit from external damage.

Further actions of the repairer will depend on the brand (type) of the plastic window.

The marking is indicated on the metal locking element.

If it’s “AUBI” or “MACO”, then it’s repaired like this: you need to find a thin metal plate with a spring in the area of the handle and press it against the seal.

It is at this moment that you need to press. Here's what you need to do if the question arises: “How to open a plastic window from the inside if the handle is jammed?”

The window (part of the window) must be in a vertical position at this moment. If everything is done correctly, you can thus remove the ill-fated blocker into an unlocked state.

In case of different markings, slightly different steps must be performed. So, if “Roto”, “Winkhaus”, “GU” is stamped on the metal, then you need to look on the fittings not for a plate, but for a protruding steel tongue. This time it is he who needs to be transferred to the “vertical” pose.

After the latter is detected, you need to press it and leave it in this position, without taking your hands or tool off it. Then, without loosening your grip, try to turn the handle of the locked window.

Now everything should “fall into place.” Replacement of the glass unit that has come out of the window is carried out by adjusting the central adjusting bolt with a special imbrus key.

If the cause is a sagging sash, this can be corrected as follows. Lubricate creaking elements with oil, if any. If there is no need to lubricate rubbing parts.

Otherwise, remove the plug that blocks the visibility of the internal working mechanism in the window. After this, you need to consider which rollers are worn out or squeaking.

What to do if the handle is jammed

You should definitely inspect the handle itself.

Are there any cracks on it?

This may well also be the reason for the window mechanism not working correctly, or completely blocking all movement of the frame.

If cracks are discovered upon closer inspection, you simply need to replace the handle itself - the plastic element whose surface is cracked.

There can be several reasons for a window not working properly.

To carry out a successful and effective repair, you need to try to first identify the reason (those reasons) that led to this state of affairs.

Replacing the seal

Shapes of seals for the narthex and double-glazed windows of different class=”aligncenter” width=”882″ height=”655″[/img]

Using a seal of a different shape does not guarantee the proper degree of thermal insulation. If you don’t remember what brand your windows are, you can take the removed seal with you. So you definitely can't go wrong. So this time, repairing a plastic window begins with a trip to the store.

Please note that the seal must be whole - one piece. Composite of two or more pieces do not provide normal tightness

The old tires are removed

First, remove the old gum. You can simply pull it with your fingers. If it doesn’t work, use something thin and sharp to pry it off. It will come out easily. Then the dust that has accumulated there will be removed from the groove.

Laying the new seal begins from one of the corners. Bring the new rubber band to the groove and insert it, pressing it with your fingers. Some effort is required, but not overwhelming. It will be more difficult in the corners. Here you need to try to lay it out evenly so that it does not wrinkle, but also does not stretch.

Install the seal from one of the corners

When the seal is laid around the entire perimeter, it can be trimmed. This is done with sharp scissors, and the joint is glued with good rubber glue. This is how easy it is to change the seal on PVC windows. Repairing plastic windows like this with your own hands takes about 20 minutes.

How to open without a handle and precautions

How to open a plastic window from the inside without a handle? There are situations when you need to know the answer to this question. So, to open a window if the handle is torn off, falls off, or has another kind of breakdown, you need to act like this:

Inspect the “broken” place (where the handle on the window was previously).
Try inserting objects that fit into the connector (the hole, which is usually square).
If you manage to select a suitable key or iron object so that it stays in the hole and does not rotate, you need to move on to the next stage.
Rotate the object, and with it the mechanism that locks/unlocks the window.

How to open a window without a handle

If the window is unlocked, it will open.

If you fail, you should try another item or another method.

Another way to open a window that is left without a handle is to use a tool in the form of a complex wrench, for example, a hexagon or a tetrahedron.

The last resort is to take a wide screwdriver.

What precautions should be taken when repairing a window (especially if the repairer has no experience in these matters):

In no case should very great efforts be applied to individual parts of the window and its fittings.
It is necessary to close the window during turbulent windy weather, otherwise sharp gusts can damage the no longer working window and its mechanism even more.

In general, the operation of a modern window is not difficult, but it can make it somewhat difficult for a beginner to try to “diagnose the problem.” To solve the most popular problems, tips were given above.

You can watch the video about unlocking the plastic window mechanism:

Noticed a mistake? Select it and press Ctrl+Enter to let us know.

Difficulties and errors

In the process of opening a PVC window without a handle, especially when it comes to extreme opening methods, some difficulties may arise. The worst thing that can happen is that if you work carelessly, you can accidentally damage the glass unit, which will lead to unexpected expenses.

When carrying out extreme opening of the sash, it is necessary to ensure that there are no strangers, especially children, in the work area.

Well, the most offensive mistake that can happen in such a situation is using an extreme method of opening a window instead of a gentle one. To prevent this from happening, it is recommended to first carefully examine the area of work, if possible, consult with a specialist, and only then take specific actions.

How to open a plastic window with or without a handle

Related article: Why lubricate plastic windows

Handle – protection against inadvertent opening

Types of handles for plastic windows

Depending on the set of tasks performed, the following types of products are distinguished:

Window handle without special functions. It allows you to easily control the window sashes.
The handle is equipped with anti-burglary elements. The design of such fittings blocks the sash mechanisms and prevents the window from opening from the outside.
Simple handles that can be quickly removed and installed.
Handle equipped with a lock to securely lock the window.
Handle equipped with a button. This mechanism is an alternative to a lock on a window handle.
Double-sided handle. Such fittings are mainly used for balcony doors. It can be simple, with a lock or with a button.

Sagging of the sash

An equally serious problem, which mainly appears in those whose windows have been installed for a long time. Over time, the sash may sag and catch on the bottom or side of the frame when opening or closing. If this problem is not noticed and corrected in time, then things may get worse.

Although the defect is significant, it can be eliminated if you follow the instructions:

Remove the plastic covers that cover the hinges and inspect the ends.
find the adjustment piece that covers the hinges
select the necessary tool and carry out the correction

IMPORTANT. Adjustment elements are responsible for movement in different directions and directions. You will need to adjust until the sash stops feeling jammed. A smooth movement of the bases should appear. If configured correctly, the sashes will not sag for another year.

How to open a window with a handle

Normal window opening and closing

Despite the simplicity of the action, there are special instructions, following which you can open the plastic window most correctly. When opening and closing window sashes, the following algorithm of actions should be carried out:

Carefully turn the handle 90 degrees to the right. Using your other hand, carefully open the window sash.

Doors in the "open" position

To close the window, press the sash tightly against the window frame. Turn the handle 90 degrees to the left to secure the sash.

Opening a window in “ventilation” mode

To allow air to enter the room, it is often enough to open the window in the “ventilation” mode. To do this, you must follow some rules:

During the opening process, turn the handle 180 degrees up. Then fold the window sash towards you and lower it all the way.
When closing the window, you need to press the sash tightly against the frame. Return the handle to its original position.

The doors are open 45 degrees

Reasons for incorrect sash position

First you need to understand the factors that lead to such problems. In 90% of cases, the reason for opening a window in two positions at once is the incorrect operation of the fittings. The main harness (tires, scissors, extensions) is located at the end of the sash. The counter strips that secure the transom are installed on the end of the frame (impost).

Stages of operation of the fittings for different sash positions:

Swing opening. When the handle is turned 90°, the strikers come out of the fixation of the hooks and the transom opens.
Ventilation. The handle moves another 90°, the lower hook remains in the horizontal striker, providing support. The sash tilts to the distance of the upper scissors.
Micro-ventilation. A special limiter has been added to the design, allowing the transom to be opened in ventilation mode by 3-5 mm.

When working in each of these positions, the elements may not function correctly.

Micro-ventilation mode (slit)

Ventilation is important both in summer and winter. Due to the natural gaps between the frame and the glass, old wooden windows did not require any special treatment. Modern PVC window blocks are so sealed that they do not let air through under any conditions. In order to maintain room ventilation in winter, a micro-ventilation or slot ventilation mode has been developed in plastic windows. To implement this, you must adhere to the following rules:

To open the window slightly, turn the handle at an angle of 45 degrees from the top position. Holding the sash with your free hand, carefully tilt it towards you until it stops.
To close the sash, press it tightly against the window frame. The handle for closing the windows turns to its original position.

Slit ventilation is also suitable in winter

Opening a window without a handle: rules for the necessary extreme

Sometimes in life there are situations when you need to open a window without using the window handle. Examples of such cases could be an unexpected breakdown of fittings or an extreme fire situation. There are several rules for opening a window without a handle. By adhering to them, you can carry out the opening process without much damage.

Rules for opening a window from the outside

In order to open a plastic window without a handle, there are several ways:

“A thin ruler is the main tool.” Using a thin metal ruler, you need to carefully penetrate the gap between the frame and the glass. Slide the ruler (or thin metal plate) towards the latch, engage it and carefully move it down. The flexibility of the plastic from which the window is made will allow it to withstand the pressure of the metal and at the same time give in gently to pressure. The disadvantage of this method is the possibility of minor scratches on the frame.
“A screwdriver to help open.” To use this method, you need to determine the location of the latch. Using a screwdriver, carefully press out the window sash. If done correctly, the sash should open slightly. To open completely, turn the handle to the desired position.
“Drilling is the only solution.” This is an extreme way to open a window with your own hands. It is recommended to use it only when other methods have proven ineffective. As a rule, the latch location is drilled out. After drilling out the locking mechanism, use a pen or screwdriver to fully open the window. During this procedure, the window unit is significantly damaged and needs to be replaced.
“A chisel to help burglary.” It is used in cases where all methods have not been successful and anti-burglary fittings are not installed on the windows. In such a situation, you can try to pry off the doors with a crowbar or chisel. As a result, the window unit is permanently damaged and requires specialist intervention.

Features of outward opening windows

How to open a double-glazed window from the outside if the sash opens in the same direction? This question is quite fascinating, because before attempting to open such a window, you need to study its features.

Typically, such designs have double-sided locking handles, which allows them to open in the other direction. There may also be additional fittings that open the sash, for example, in ventilation mode. If there is such a function, that’s great: you can try using a ruler to switch the window to this position, push your hand inside and open it.

Quite often this method does not work with this type of window. You can try to pry them off with a crowbar or a chisel, but in the end the window will be broken and it will need repairs because the locking mechanism will be disabled.

How to open a plastic window from the outside with a screwdriver without damaging it. Determine where the latch is located. In that place, use this equipment to try to press the window sash.

A more complicated version is when there are several pins in the opening mechanism. In this case, you need to act step by step. Opposite each of the trunnions, it is necessary to tear off the sash, pushing the trunnion behind the bar, and proceed to the next one only after the previous trunnion is fixed on the other side of the bar.

READ Insulating the walls of a wooden house from the inside

You can open it by clicking on the fittings. Then, if everything was done correctly, the sash will open slightly. The next and final step is to turn the locking handle.

It must be emphasized that all these methods are effective only in this case if the window is equipped with standard fittings. But if the attackers are masters, they can also break windows with Roko and Mako anti-burglary fittings.

How can you open a plastic window from the street? Armed with a narrow iron plate or steel ruler, this element must be carefully placed between the frame and the glass unit.

Your next step is to get to the latch of the plastic window. Managed? Then we hook it with the inventory and slowly pull it down.

There is absolutely no difficulty here because plastic is a fairly flexible material that will not withstand metal pressure. The only disadvantage of this method is the likely occurrence of minor scratches and even dents.

As a result of these actions, the cylinder of the locking mechanism should jump out of the hook; if the locks are located on several sections of the valves, which is the case in most cases, the function must be repeated by inserting a screwdriver in front of each of them. The moment the pin jumps out of the hook is accompanied by a loud click.

This opening method is quite simple, and, most importantly, after such a break-in, the fittings remain intact. The only thing is, if you do the work sloppy, you can scratch the plastic.

Available Methods

It happens that you need to quickly solve the problem of how to open a modern window from the street side without damaging it. For example, a child is locked indoors and the lock on the front door is broken. The keys were forgotten in the room, and the door was locked. There are several methods that allow you to open a plastic window system from the street without problems.

This is done using a thin steel plate and an iron ruler. A standard screwdriver, which is found in almost every home, will also work.

Screwdriver opening method

a power screwdriver comes into play , use it where the latch is located. First, you should press the metal-plastic sash, then open it, gently pressing on the fittings. After the sash opens a little, the handle of the functioning locking system is turned.

Opening with ruler/plate

A plate or ruler can help solve the problem . In this situation, the diagram will have a slightly different appearance. The tool is placed between the glass and frame. The goal is to get to the latch, then hook it with this tool and pull it down. Opening a window with a good level of physical fitness can be done relatively easily using this method. The fact is that plastic is a material characterized by excellent flexibility. And if you make an effort and follow all the steps described above, the window will open with ease.

Drilling

There is another, complex method that allows you to open a PVC window from the outside - you will need to drill a small hole in the frame . It is through this that you can open the window using a handle and a hole. It is worth saying that this is how thieves work, breaking into windows and damaging plastic structures, so this method is not suitable for everyone.

Call a specialist

The best option for opening a PVC system from the outside is to call emergency service representatives . To prevent the window from being opened by strangers, it is worth using special fittings that are thought out to the smallest detail to prevent break-ins. A so-called “mushroom trunnion” will do. It is equipped with so-called anti-burglary windows, specially designed to counter attempts to open the plastic structure from the outside.

Alternative windows

There are special metal-plastic window designs with sashes that open inward/outward . There are many advantages of such windows. There is no need to take flower pots from the windowsills when ventilating, and there is no need to worry about insects flying into the room. A mosquito net will provide protection from them. It is worth taking into account that the mesh is installed exclusively on the inside of the room and, most likely, the window handle will rest against it. Therefore, when closing the window, this grid should be rolled up and removed.

Installing the windows described above is an opportunity to save living space. For example, you can place interior items against a window opening.

Protection of PVC window structures from gusts of wind is carried out using a variety of fittings components, which allow you to install the sashes in the manner you need.

Plastic windows are functional. Many of them have double-glazed windows that open exclusively outwards. And they do not differ from standard windows, since the sashes can have a micro-ventilation function and do not have partitions in the middle. Some models have 2-sided handles.

Keep in mind that in order to close such a structure, you will need to lean directly through the opening on the street. And if you do not live on the first floor, then such a trick is quite dangerous, since windows with double-glazed windows that open outward are preferably used exclusively for rooms located at a low altitude.

If PVC windows open outwards, then, like double glazing systems, they have some special limitations. For example, when installation is carried out directly in a window opening with a quarter, then the structure must be reduced by 1/4, otherwise the sash will rest against it and therefore will not be able to open. If the window opening is without 1/4, there are no restrictions.

Conclusion

From the article you learned that standard plastic windows can be easily opened from the outside using a regular screwdriver or a metal ruler. If some nuances are not completely clear to you, ask questions in the comments, and I will definitely answer you as soon as possible.

Did you like the article? Subscribe to our Yandex.Zen channel

November 27, 2016

Windows, Plastic

If you want to express gratitude, add a clarification or objection, or ask the author something, add a comment or say thank you!

How to open a plastic window correctly?

In order for a plastic window to last as long as possible, it is very important to open and close it correctly. This directly affects the service life. Which ventilation mode should I choose and what is the difference between each of them?

When double-glazed windows are installed in the house, you need to learn how to use them. If you open such a structure incorrectly, this may lead to breakage of the fasteners, and as a result the window will have to be repaired.

Tips for use

As it turned out, plastic windows are very easy to use and maintain. Most problems can be fixed by yourself without calling a window technician if you follow the instructions described above.

You can learn more about the types of double-glazed windows for plastic windows in this article.

The windows are easy to maintain and easy to clean. The main thing is to choose the right detergent.

It is possible that information with a solution will be useful to you if the plastic window does not close.

Liquid detergents can easily remove dirt. To avoid small scratches on the frame, it is not recommended to use abrasives or powders.

And in order to avoid problems with window mechanisms in the future, you should carefully select a window manufacturer and provide the profile with proper care.

Some recommendations for the proper use of PVC windows:

It is necessary to periodically ventilate the room to prevent air from stagnating.
Clean windows as they become dirty using a soap solution (without acetone).
Avoid abrasive products to avoid scratching the profile.
When opening and closing the window, you must turn the handle without putting pressure on it.
All moving and stationary parts must be lubricated twice a year.

With proper care and use, PVC windows will retain their appearance and technical characteristics for a long time.

Plastic windows: ventilation instructions

So, the profile sashes can be installed in different positions. Let's list them.

To fully open a tilt window, you need to turn the handle 90 degrees and place it in a horizontal position, then carefully pull the sash towards you.

If you need to close the window, you should first press it against the frame, and then return the handle to its original position, that is, turn it 90 degrees again.

To set the PVC folding windows to ventilation mode, turn the handle up 180 degrees and pull the sash towards you.

The window opened in two positions at once

This can happen when you try to open a sash that is already set to ventilation mode. Visually, the fault looks like this: the sash is slightly open, its upper edge has moved away from the frame, the handle is locked in a horizontal position.

This position is undesirable for a window system, since the entire weight of the sash falls on the lower hinge, which can lead to its breakage, so you need to act quickly enough.

To return the window to functionality, you need to perform several steps:

1. Disable the blocker - this is a part whose function is to prevent the window from breaking if it is used incorrectly. Depending on the design features, this can be done by pressing the trunnion-shaped lock against the sash seal or by installing a metal tongue located near the handle parallel to the sash. If there is no blocker, this item is omitted.
2. Firmly press the upper corner of the sash from the hinge side to the frame.
3. Close the window by turning the handle all the way down.
4. Now all that remains is to make sure that the window is functioning normally by trying all possible modes one by one.

Disabling the blocker

The window will open in two directions and if you try to set the already open sash to ventilation mode, only in this case the handle will take a vertical position.

The procedure is the same, only after the upper corner of the sash is pressed against the frame, the handle should be installed horizontally.

If the window opens in two positions at once, even with correct operation, there may be several reasons for this:

Micro-ventilation on plastic windows

Most PVC products have a micro-ventilation mode. It allows you to let fresh air into the room, but at the same time does not let in large quantities of cold wind, rain, snow and other aggressive environmental factors. Standard ventilation is not always convenient in winter, since under the above conditions, a fully open window in the room creates an uncomfortable environment. And the best option is micro-ventilation.

What is this option? This is an opportunity to perform so-called slot ventilation, where the distance of the opened sash is only 7-10 mm. As a result, air does not penetrate into the room immediately, but gradually, while the room does not become cold, strong wind does not enter, and dust and moisture do not penetrate.

In this mode, an open window has many advantages:

Creating a comfortable and healthy atmosphere.
Absence of adverse environmental factors.
No drafts.
Maintaining optimal indoor temperature.
Prevents the formation of condensation, which can lead to mold formation.
In the summer, no heat from the street enters the room, that is, the room remains pleasantly cool.
There is no conflict with anti-burglary mechanisms, since they operate in this mode.

How to properly open the sash for micro-ventilation? This is quite easy to do. This is done by turning the handle. The mechanism itself is installed in special scissors, which are located on the doors.

First make sure that the frame is completely closed and the handle of the plastic profile is in a vertical position. Now grab it and bring it to a horizontal position, at the same time the rotation should be very small - 45 degrees to the side. You will notice that the frame is only a couple of millimeters away from the profile.

To properly close the structure, you must first determine the position of the handle. The same is true when changing ventilation modes. First, close the frame again, and only then change its position.

The window does not close - reasons and solution

The nature of these malfunctions is in many ways similar to the problems that arise when opening the doors. They are solved in a similar way, but there are additional nuances that you need to know about.

Jamming of the blocker

In the case of open windows, the issue with the blocker is easier to solve, since there is access to it. The mentioned device is a spring-loaded mechanism and is located on the inner edge of the active leaf. How to troubleshoot problems depends on their nature:

Haste when closing the sash
- such actions often lead to the handle being blocked. Moreover, the window itself may be completely serviceable, so restoring the functionality of a jammed mechanism will not be difficult. In this case, before closing the plastic window, if the sash is jammed, you should first press the lock and then turn the handle.
The blocker slips past the mating part, as a result of which the handle remains inoperative
- it cannot be turned. This mainly occurs due to imbalance of the hinge group or deformation of the sash. If the handle is stuck in the open position, the opening mechanisms must be adjusted to resume correct operation. It may also be necessary to return the skewed sash to its correct rectangular shape.
The locking element has bent
- this can also cause the handle to jam. To restore its functions, you need to press the plate towards the street.
The springs of the locks fail
- such a breakdown can at any time cause the sash to jam. If a faulty spring is detected, the lock must be replaced immediately.

When you can’t quickly fix the problem on your own, it’s best to remove the blocker altogether. To dismantle the device, it is enough to unscrew one or two screws. You can install a new blocker yourself or invite a specialist.

Foreign objects getting into the fittings

The window opening mechanism may become clogged with debris, which prevents the sash from closing. Mostly, such problems are encountered after repairs, if the necessary measures have not been taken to protect the fittings. In this case, frozen building mixtures (cement, putty) or small pebbles interfere with the normal movement of the locking eccentrics. Moreover, even the gearbox can become clogged with debris. To resume normal operation of the window, it is recommended to remove construction dust and crumbs with a vacuum cleaner, and then wipe with a napkin and lubricate the fittings. If this does not help, you will most likely have to disassemble and clean the gearbox. In this case, it is better to call a specialist.

Skewed slot ventilation strip

If the sash sag or the screws loosen, the counter strip of the slot ventilation device may prevent the sash from closing in the upper zone of the light opening. In this case, you need to adjust the position of this element or tighten the screws. To make it easier to find the correct position, the strike plates have oval holes for screws, which allow you to move the element a few millimeters without unscrewing. If attempts to adjust the bar yourself are unsuccessful, it is better to remove it, close the sash and call a specialist.

How to close incorrectly opened windows?

Often, due to the incorrect position of the handle, it is not possible to close the sash completely. But don't worry. Anyone can get a jammed plastic window back into working order.

It is necessary to find the handle rotation lock and press firmly on the plate while at the same time trying to turn the handle. As a result, it should return to its original position. Most manufacturers install similar blockers for force majeure circumstances.