Most garages are used not only for parking cars, but also as workshops. In the absence of natural light, it is uncomfortable to stay in them for a long time, and it is difficult to perform any tasks. Therefore, in such rooms it is imperative to install windows with the most convenient design. During their installation, it is necessary to adhere to certain requirements and take into account possible consequences.
To ensure good lighting of the entire internal area of the garage and to protect the windows from burglary, window structures are placed as high as possible, almost under the roof Source 1pogarazham.ru
Overview of types of windows in the garage
Often car owners use the garage not only to store the car, but also as a workshop or for other needs.
It is very difficult to stay in a dark room where there is no daylight at all for a long time, and it is harmful to your eyesight. If possible, it is better to install windows in the garage. And how and what - this is discussed below. You can find tips on how to paint garage walls here. The picture shows an example of a garage with windows
Windows in the garage are needed if only because the room itself is dark, and installing even one small window will allow you to add light inside. In addition, the windows will serve as additional ventilation, with which you can ventilate exhaust gases and also help moisture evaporate. However, you should be careful and install windows in a garage that is located on your own property, or in a cooperative that is guarded. In order to protect against intruders, it is recommended to install anti-burglary fittings on windows or roller shutters for additional protection. Read the instructions on how to make a cellar in the garage on this page.
As a rule, garage windows are made small. Either rectangular, elongated in length, or small square windows. The best option is to install plastic windows with double glazing in the garage. Such structures do not require much maintenance and perfectly retain heat in the room. Most often, garage windows are installed higher than regular windows.
The standard sizes of single-leaf windows are 55x50 cm, and the sizes of double-leaf windows are 115x100 cm. Such windows are easy to install, do an excellent job of ventilation and provide good additional lighting, despite their small size.
- Glass block garage windows have now gained a lot of popularity in installing them in garages. A glass block is glass that, by transmitting light, reduces visibility, that is, windows made of glass blocks are light-emitting, which at the same time speaks of their uniqueness. Glass blocks can be used to install not only windows, but also entire partitions. In addition to their good ability to transmit light into a room, glass blocks have excellent sound and heat insulation properties, as well as fire resistance. To install this type of window, you will need polymer-cement or cement-sand mortars.
The photo shows an example of double-glazed windows
The shapes of windows in the garage do not have to be round or rectangular. You can use a little imagination and make original frames, which will significantly transform the room both inside and out. Instructions on how to make ventilation in a garage are here: https://kakgarazh.ru/ventilyaciya/instrukciya-kak-sdelat-ventilyaciyu-v-garazhe.html.
The photo shows possible design options for garage window frames
The most common type of windows in the garage are small oblong windows located high, as in the photo below.
The picture shows a standard garage with small plastic windows.
Windows can be single-hung or double-hung, or not open at all. This is at the request of the customer.
A double-leaf plastic window in the garage is shown in the photo
How to do it?
The installation of plastic windows in a garage is done most often, so let’s look at the installation of windows in a garage using the example of plastic windows:
- For installation, you will need U-shaped gaskets made of rubber or plastic and metal slats;
- For self-installation, you will need to connect several glasses using profiled gaskets or putty to create sealed double-glazed windows. And the details listed above will help secure them;
- Installation of plastic windows can be done at any time, since the material from which they are made does not absorb moisture;
- Before the actual installation process, it is necessary to clear the window opening and install the frame into it, checking its location with a level. Next, fix the frame using anchors;
- Seal the cracks with polyurethane foam, and after drying, trim off the excess foam using a knife;
- Next, plaster and paint the foam, thereby protecting it from ultraviolet radiation;
- The final stage of installing a garage window is waterproofing it using silicone putty.
Cost of garage windows
The main influence on the cost of garage windows is the size, design and material of the future window. The minimum cost starts from 1300 rubles, this does not include installation. Read the guide to choosing the type of cellar for your garage.
Where to buy or order garage windows?
Where to buy or order in Moscow:
- Swedish Garages Company, Kashirskoye Shosse, 65, contact phone number;
- OSK Windows company, st. Marshala Novikova, house 16, contact phone number;
- StroyVest LLC, Moscow region, Shchelkovsoke highway, Oseevo village, contact phone number.
Where to buy or order St. Petersburg:
- Company 33 masters, Dalnevostochny Ave., building 14, of. 4-09, contact phone;
- Oknosphere company, Novokolomyazhsky Ave., 4, building 1, contact phone number;
- Company Construction Group Tanger, st. Litovskaya, house 0, contact phone: 8 812() 915-74-88.
As it turned out, windows are an integral part of the garage, and one might even say, very necessary, if we are talking not just about a place to store a car, but about a garage complex.
Preparatory work
Before starting construction, you need to draw up a drawing of the garage and prepare the place where it will be installed. A metal garage can be of two types - stationary and on metal skids. The first option is considered more reliable and protected from car theft. To secure the supporting parts of the box, either welding or bolts are used.
Building a metal garage
Garage drawing
The foundation for such a garage is made of strip or slab. It should rise above ground level by about 10-15 cm so that melt water does not flood the floor.
For construction you will need:
- concrete solution;
- reinforcement with a cross section of 10 mm;
- steel corner 50x50 mm;
- sheet steel 2 mm thick;
- profile pipes 60x80 mm;
- insulation;
- building level;
- locks, bolts and hinges;
- electrodes and welding machine;
- grinder with cutting and grinding wheel;
- primer;
- metal paint. Acrylic protective paint for metal
When all the tools and materials have been prepared, they begin to clear the area. They remove tall vegetation and stones and mark the boundaries of the foundation. Using a tape measure, a square, twine and wooden pegs, markings for the foundation are made. The standard parameters of the base are 3.5x6 m, but may vary depending on the project.
Windows in the garage - installation rules, types, installation process
A garage is a home for a car, motorcycle and other types of transport. The purpose of such a room is long-term storage of complex mechanisms, the important role of which is proper air circulation.
There are many ventilation systems, but windows, as a budget and simplest option, will never become outdated. In addition, their presence is simply sunlight, which is necessary when visiting the garage frequently. We will try to tell you in detail how to install windows in a garage without damaging the property, as well as what material is best suited.
Other sources of natural light
In many garage co-ops, long buildings are divided into individual bays. It is almost impossible to install windows in them, but you also cannot do without light. Try one of the alternative options for bringing natural light indoors:
- Translucent systems for roofs, such as skylights and light tunnels, will provide sufficient access to sunlight;
- Garage doors equipped with glass panels that fill the doors completely or partially.
These methods of supplying natural light to the garage are also convenient if you bought a ready-made garage that did not have windows. Alterations will be minimal, and the result will be the best.
General rules
In urban environments, garages are usually located close to each other and it is simply impossible to install windows in them. If, however, they are actually installed, then they must be provided with additional protection, since window openings increase the risk of break-in.
The most commonly used are grilles or roller shutters; they are installed in the garage from the inside or outside. Also, an effective way of protection is to install various security systems. They should be placed under the ceiling and have the shape of an elongated rectangle of such a height that a person cannot crawl into them.
It is advisable to plan windows in garages made of bricks or blocks when designing a construction site. In this case, they can be made of any shape and size. If you have to make holes in already finished walls, then everything will be somewhat more complicated, since there is a certain risk of damaging the integrity of the walls.
Additional work
The next step is to attach the window to the opening.
The technology for installing double-glazed windows involves the use of dowels or anchors with a diameter of 6-8 and a length of 75-80 (mm). To fix the ebb, use metal screws with a length of 9 and a diameter of 4 (mm). To adjust the window, hexagons are used. The gaps formed between the frame and the opening are filled with foam. is made after it is protected from ultraviolet rays. To install the window sill, you will need to measure the width and length of the structure. The product is adjusted using a grinder or jigsaw. It is set according to level. The plugs must fit into the wall. Glue is used to install them. If necessary, the window sill is mounted at a slight angle relative to the glass unit (no more than 3º). This technology prevents condensation from flowing under the window.
The cavity formed under the window sill is blown out with construction foam. The gap between its upper part and the frame is filled with silicone. To simplify the procedure for installing a PVC window sill, experts recommend using Z-shaped galvanized plates. The next stage is the final adjustment of the structure. The handle is screwed to the glass unit and the protective tape is removed.
Window size
It is better to install small windows, since the size affects heat losses (a large amount of heat escapes through it, collecting in the garage).
When choosing large openings, the level of security is reduced (the larger the window unit, the easier it is to get inside), as well as the cost of installation increases due to the larger area of glass and installation work (the larger the glass unit, the higher the price).
Windows may differ in their purpose - they can serve for additional lighting, or they can be a decoration element. Although the principle of their design is the same, their operation may differ.
Their main types:
- Glass blocks are glass that transmits light but reduces visibility. Glass blocks perfectly insulate sounds, retain heat and are fire resistant. Installation of this type of product is carried out using a polymer-cement mortar or a mixture of cement and sand.
- Plastic window systems - in such double-glazed windows, the structure is firmly fastened along the perimeter of the glass, the space between which is sealed. Installation of plastic structures is carried out on a rubber or soft plastic gasket, after which they are secured with metal slats. Such structures are sealed, retain heat well, are easy to install, and are resistant to mechanical and other damage. Reliable in protection against penetration from outside.
- Wooden window frames - their feature is the ability to independently manufacture them from wooden beams and glass. Installation of wooden structures is carried out with special jagged nails. They require regular maintenance; the wood of the frame must be treated with additional impregnations. Unfortunately, they are easy to hack, and their level of thermal insulation, if not designed correctly, leaves the best.
Material selection
As in any building, the garage can have window frames made of different materials. The most common options are wood and plastic. Each material has individual characteristics, installation features, advantages and disadvantages.
Plastic
Plastic double-glazed windows have proven themselves when installed in residential buildings. The structures minimize heat loss, are very easy to use, have a long service life and decorative properties. Other advantages of plastic openings include the following:
- Resistance to external influences. Windows protect the interior space from intruders and do not crack at low ambient temperatures.
- Possibility of modification. The surface of the glass unit can be covered with a specialized film to increase the degree of protection or tinted to visually hide the garage space.
- Fire resistance. Thanks to the zero fire propagation index, plastic windows are not subject to fire, but only begin to melt and contribute to the extinction of the fire.
It is advisable to provide for the installation of plastic structures at the stage of design and construction of the garage. This will allow you to provide the necessary security system in advance, leave an opening of the appropriate size and simplify the further installation of windows.
Wooden
Wooden window structures are an affordable option for installation in a garage. In terms of technical characteristics, wooden openings are not inferior to plastic ones, since the frames provide reliable protection and, due to their special structure, ventilate the room even in winter. Treated wood is resistant to precipitation and has a long service life, but requires proper installation and additional insulation.
Making an opening
You can ensure good lighting in your garage and protect it from burglary by making window openings as high as possible, almost under the roof. For the same reason, the sizes of windows in garages are small. As mentioned above, the best option is to mark them in the initial garage project.
Thus, maximum accuracy is achieved during its installation. If holes have to be made in an already finished wall, then the work will be somewhat more complicated.
First you need to mark the location of the opening on the wall. It is important to remember that making significant changes to the design of any building can lead to quite serious damage, even destruction of the object. Therefore, before starting work, it is necessary to consult with specialists.
If the engineering issues have been resolved, then you can move on to further work, namely, punching or building a window opening. It is important to add here that if the garage is made of brick, then it is better not to touch the walls at all.
If we are talking about foam blocks or beams, then a gas or electric saw is suitable for sawing through the opening. It is quite possible to ensure strength during construction by placing a frame of welded metal plates inside the opening.
What about a metal garage?
It is also possible to make a window in a metal garage, but with great difficulty. At first glance, the problem is solved with the help of an aluminum profile. But the question of fastening arises. It will not be possible to weld the iron frame of a wall with aluminum - you need argon welding or highly qualified welders who have learned the secret of welding steel and aluminum in the field, which is the garage. Trying to weld embedded heels onto a metal wall and screw an aluminum frame to them is not the best solution - a gap appears offset along the plane, which cannot be foamed.
The solution is to make the outline of the opening from a metal plate and weld it to the wall. Then everything is the same as installing windows in a frame garage.
Window installation
If wood is used as a material for the manufacture of a garage window, then the work should be carried out as follows:
- It is necessary to first insert the frame into the opening in order to measure the gaps between it and the opening. The width of the gaps will determine the thickness of the inserts under the box.
- Screwing hinges to the sashes and frame. Boxes with double-glazed windows are hung on hinges. It is important to check for any slope and eliminate it before carrying out installation work.
- Construction foam is poured into the gaps between the window frame and the walls.
Wooden window
Their installation begins with strengthening the frame and screwing the hinges.
- easy to make and install yourself;
- ease of repair;
- wood is more environmentally friendly.
- need additional insulation in winter;
- It is necessary to carry out preventive maintenance (painting, cleaning).
Plastic window
Modern plastic windows have superior characteristics to other types. They are manufactured exclusively in factories, and installed by the company that sells them. You can save money by installing it yourself.
Installation of plastic windows is similar to wooden ones. The only difference is that it itself has a slightly different device - a double-glazed window is inserted into a plastic frame and fixed with special clamps. The glass unit is removed from the frame and the frame is installed. The box is leveled and secured.
A glass unit is inserted and fixed into it. The gaps between the box and the frame are filled with foam using choppers. After the polyurethane foam has hardened, cosmetic work is carried out - plastering, putty, grouting and wallpapering or painting.
- durability;
- ease of care;
- good sound and heat insulation.
This includes ventilation, which plays an important role and is of particular importance in ensuring the storage conditions for metal equipment, as it allows you to clean it from harmful gasoline vapors and remove excess dampness, and sunlight, which helps save money on artificial lighting. There are many options for window designs - for every taste and price category.
Consequences
In the title I noted that it might even be worth moving into a garage with windows now. Of course, in reality I don’t have any serious thoughts about this, but there are still reasons to write this way, and they are absolutely opposite:
Improving conditions of stay
Do you really need windows in a garage? Yes, even rather necessary, since they provide the following:
- Availability of sunlight. The car is not the only inhabitant of the garage; you also spend a lot of time there, and human eyes need a good source of lighting. You can, of course, make do with lamps alone, but, firstly, it will be more expensive, and secondly, it will cause severe strain on your vision;
Artificial light solves the problem, but solar light does it better
- Ventilation. Ventilation in the garage is of particular importance, as it allows you to clean it from gasoline vapors harmful to humans and remove excess dampness, which is very harmful to the car itself.
So one of the reasons for the possibility of a hypothetical move to a garage is the emergence of more comfortable living conditions in it. And in fact, thanks to the abundance of light and clean air, I began to spend more time in it and equipped a comfortable workshop.
The presence of even a small window contributes to the arrangement of the workshop
Reduced security level
Now for the bad: Having windows increases the chances of intruders wanting to break into your garage. A thief cannot get through a blank wall, but criminals have learned to open double-glazed windows. So the second reason for a possible move is the need for additional security.
I recommend immediately equipping the installed window units with blind, hinged or roller shutter bars. This, of course, will lead to additional expenses, but they are still incomparable with the cost of your car.
Hinged grille protects the window from burglary
The ideal option in the situations described is, for example, a one-story house with large windows and a garage. In such a building, you don’t have to worry about the safety of the car, and in order to work in the workshop it will be enough to simply move to another room. But this option is not suitable for apartment owners.
Windows in the garage
There is a constant debate about whether windows are needed in a garage. Some argue that windows make it easy to enter the garage, while others insist that a garage with windows provides an opportunity to reduce energy costs.
Oddly enough, both sides are right. If you choose the wrong windows for your garage, heat loss increases and there is a high risk of robbery. Properly selected and installed window openings will reduce electricity consumption, which now costs a lot, and will provide additional ventilation to the room.
Assembling a double-glazed window
Garage assembly: Double-glazed windows assembled in a handicraft way do not meet technical standards, the geometric and linear dimensions of each product are different, as a result of which the windows fail quite quickly.
Automated production: Double-glazed windows are assembled on an automatic line, which avoids defects and unevenness. The glass unit is pressed with a given force under computer control, due to which the thickness complies with technical standards. The window turns out really smooth and of high quality.
Design features of garage windows
If the garage is used only to protect the car from theft, rain, snow and wind, then windows in the room do not need to be installed, especially in a metal box made of corrugated sheets. But, if repair work is often carried out in the room, then it is better to install windows in the garage.
What technical characteristics should garage windows made of any materials have:
- must retain heat - high heat-saving characteristics;
- complete tightness - old wooden frames will not be able to meet this requirement, even with high-quality repairs and double glazing;
- windows in garages must be burglary and intrusion resistant;
- the owner must be able to open the window from the outside - this is necessary in case of a fire or simply if the keys to the garage are lost, this also happens.
Which garage windows will meet all of the above characteristics?
Types of garage windows - a brief overview
Let's look at the basic designs of garage windows that you can buy:
- glass blocks are good because you can choose a window of any size and shape. Features of glass blocks are the reflective properties of glass. Such windows allow light into the garage, but it is impossible to see the garage from the outside through the glass. Glass blocks are soundproof and have low thermal conductivity, resistant to fire. It is easy to install the blocks yourself in a window opening, securing them to an adhesive mixture or cement mortar;
- plastic windows for the garage - well-known double-glazed windows are completely sealed, retain heat excellently, are easy to install, and are inexpensive. You can order a window design according to individual characteristics - shape, dimensions, original locking fittings;
- wooden window frames can be installed if the garage is located next to the house, in a protected area. Such windows are easy to break; the wood of the frame must be treated with fire retardant and antiseptic impregnations;
- In private cottages, garages with panoramic windows are becoming fashionable, but they are not cheap.
The most popular among car enthusiasts have long been inexpensive plastic windows in garages, which, with excellent technical characteristics, are easy to assemble and install yourself.
Is it possible to insert PVC products with your own hands?
Installation of plastic windows is a simple process at first glance and does not require special knowledge in this topic. But, if you analyze all the nuances, you can come to the conclusion that this event still requires experience.
it is important not to make a mistake with the measurements of the window opening
Secondly, it is necessary to efficiently dismantle the old double-glazed window - this will also require time and effort, because it will be difficult to cope with this work alone.
Another nuance is to prepare the window opening for installation of a new plastic double-glazed window.
Of course, any apartment owner who has at least once prepared a door or window opening for further installation of the product can cope with this. If you do not have such experience, you will have to spend a lot of time to do everything right.
If you want to save money, you can hang the double-glazed windows yourself. But this requires preparing the tools, all the necessary consumables, and also reading the relevant literature in advance.
It will be important to watch visual videos, as well as preliminary analysis and analysis of all potential errors that may arise during the installation process.
Is it worth installing metal-plastic frames yourself?
You can install a metal-plastic window yourself if you are confident that the work will be done efficiently and in the future you will not have to call installers to correct mistakes. Otherwise, it is better to still seek help.
There are several moments when it is recommended to leave installation in the hands of masters:
- The windows have a non-standard shape.
- The preparation of the opening was carried out incorrectly, leaving large gaps.
- No experience in this field.
- It is necessary to carry out the work quickly, as the temperature conditions outside are low.
In this case, it is better to contact the appropriate company - the installers will complete all the work from start to finish in a few hours.
If mistakes were made during dismantling and additional work is required to seal the frames, you should also contact the organization for installation. If the window opening has a non-standard shape, it’s also not worth taking risks - it’s better to trust the professionals.
Dimensions and features of installation of plastic windows in the garage
To ensure good lighting of the entire area of the garage and to protect the windows from breaking in, they are located as high as possible, almost under the roof. For the same reason, the sizes of windows in garages are small - single-leaf structures are 50 x 55 cm, double-leaf structures are 1 m x 1.15 meters.
For complete lighting of a standard garage, two single-leaf rectangular windows are sufficient. Each garage owner chooses the shape of the structure at his own discretion, it all depends on the characteristics of the room.
A garage with windows is not only convenient, but also significant savings in energy costs. Installing plastic windows is a reliable and affordable budget option. You can always order the required window sizes and install it yourself. The installation process is simple and the savings are significant.
There is a lot of competition in the plastic window market, so you can always find a company that offers high-quality windows for garages with free installation.
Advice. Standard double-glazed windows are cheaper than designs that are made to individual sizes. Make sure you have the ability to install standard frames on your garage wall.
Do-it-yourself installation of plastic and wooden windows
The process of installing a plastic window is simple:
- first you need to prepare the opening - to do this, we knock out a hole in a brick or concrete wall according to the size of the frame or use a grinder to cut out the required window size in the wall of the garage;
- clear the opening from construction debris;
- We level the frame using wooden blocks and plywood spacers;
- the wooden window frame is secured with anchors to the walls on the sides and bottom (step 60 cm);
- The frame is fixed on top with a rubber gasket (thickness 5 mm, width equal to the width of the frame);
- then install spacers and fix the gaps between the frame and the wall with foam;
- Having installed the window frame, hang the frames and be sure to check whether the sashes open freely.
Now all that remains is to cut off the protruding foam and plaster the perimeter of the opening.
The principle of installing plastic windows is similar:
- clean the opening and level the frame;
- fix with anchors;
- foam around the perimeter;
- we clean off the remaining foam and plaster the opening.
For complete sealing from the outside, the perimeter of the window frame can be additionally treated with silicone-based putty.
Corrugated sheeting - a cheap and reliable choice
If you need to quickly and efficiently build a garage, then the option made from corrugated sheets looks the most promising. First of all, a person must purchase the desired brand of material on the market.
For such a task, brand S-20 or corrugated sheeting with a sheet thickness of 0.7-0.9 mm is quite enough. In this case, the capital letter indicates the purpose of the metal component (used to create wall coverings), and the number indicates the rigidity of the material, respectively, the higher it is, the stiffer the corrugated sheet.
Next, we smoothly move on to installing a monolithic foundation. Initially, we dig a trench about 0.5 m down, fill it with sand and fill it with water.
Also, do not forget about the wells for the racks (the depth is the same as the trench). We fasten the wooden formwork and install metal reinforcement.
We install the racks, level them all to the same level, fill them with concrete and wait several weeks. While this process is going on, we are simultaneously constructing a metal frame and cutting pipes.
Next, using a welding machine, we attach horizontal rods to the racks (there are 3 such points). We adjust the corrugated sheet to the required dimensions, fastening it with fastening materials.
Window burglary protection
It is imperative to take care of protecting your garage. There are several options for protection against hacking:
- internal metal grille - think over a clever locking element so that only you can open such a grille if necessary;
- anti-vandal glass will increase the cost of a double-glazed window by 20 percent, but it is impossible to break such a window;
- Blinds or roller shutters are reliable protection for large window openings.
Experts advise simply making the size of the window in the garage such that it is difficult for an adult to enter it; 1 m x 0.50 cm is the best option.
Safety Tips
When installing garage doors, safety precautions should be a priority. There are several ways to minimize the risk of hacking:
- small opening size (50 x 50 cm or 100 x 50 cm) is the simplest solution that does not require additional finances;
- installing a window under the ceiling, as a result of which it is impossible to reach the opening without a ladder;
- metal grate. Can be installed inside and outside. When installed externally, embedded anchors must pass through the wall and be secured with a nut and a large washer - there is no possibility of pulling them out with a crowbar;
- use of impact-resistant glass (tempered or triplex). The price of a window generally increases by about 20%, but eliminates the possibility of breaking the glass with improvised means, and thieves, as a rule, do not carry a sledgehammer with them;
- Aluminum roller shutters look beautiful, but are weaker than grilles.
When using glass blocks, the most reliable solution is to place reinforcement in the masonry joints with its ends extending into the wall. You can see how it looks when laying a window in the photo below.
Alutech panoramic door systems
Panoramic doors of the Alutech brand are considered one of the best for arranging garages, service stations, and car dealerships. They are functional, durable, guarantee high sound protection, and minimize heat loss. A large selection of design solutions allows you to choose the best option for a specific object. The sections are made of corrosion-resistant aluminum profiles with or without thermal breaks. The manufacturer’s range also includes three door options, each of which has features and advantages.
AluPro is a modern model that guarantees optimal protection against extraneous sounds and heat loss. Gate sections are assembled from aluminum profiles without thermal breaks; if desired, you can additionally install a wicket gate. There are different designs, including combined ones, where sandwich panels are used simultaneously with panoramic ones. Sections can be filled with the following materials:
- Composite aluminum panels with a thickness of 2.6 cm and 0.3 cm. In the first case, the gap between the embossed metal sheets is filled with heat-intensive extruded polystyrene. In the second case, the space between two smooth aluminum sheets is filled with high-pressure polyethylene.
- Gates made using panels glazed with single acrylic 0.3 cm thick.
- The products are 2.6 cm thick, glazed in two layers of impact-resistant acrylic, the transparency of which does not change depending on operating conditions.
The gates of the AluPro line are as follows according to the type of panel:
- ALP, with a canvas of panels of the same size, with glazing of 2.6 cm and 0.3 cm. Models can be anything, including combined ones, where acrylic glazing is combined with sandwich panels.
- ALPS, in which the bottom panel is made of steel, the remaining panels are glazed with sections of sandwich panels or panoramic acrylic with a thickness of 2.6 cm and 0.03 cm.
- Software in which one or more sections, except those at the bottom and top, are panoramic, the rest are made of sandwich panels. The software line also uses panoramic panels, glazed with 0.3 or 2.6 cm acrylic.
AluTherm is a design made of aluminum profile with a thermal break, which provides reliable protection against heat loss.
In the designs of the AluTherm line, a combination of sandwich and panoramic panels is allowed, which allows us to offer consumers the following types of gates:
- LSA, in which the canvas consists of panoramic panels of the same size. Products are glazed with 2.5 cm thick double or triple acrylic glazing or 2.6 cm thick composite panels.
- ALPS, structures with a lower section made of sandwich panels with a pattern, the remaining sections 2.5 or 2.6 cm thick are glazed with acrylic, made of composite sandwich panels.
- PO – gates with one or several panoramic sections of 2.5 or 2.6 cm, the rest are filled with sandwich panels.
Panoramic sections of AluTherm series garage door systems are filled with the following materials:
- Composite panels 2.6 cm made of aluminum, acrylic sheets. For maximum protection against heat loss, the space between two embossed aluminum sheets is filled with polystyrene.
- Glazing 2.6 cm thick made of two-layer acrylic.
- Triple glazing 2.6 cm thick made of acrylic, which increases the thermal insulation characteristics of the room by 9%.
Aluline is an excellent option for those who value refinement and high strength characteristics. Panoramic gates are made from a narrow aluminum profile with a visible part of 6.5 cm and almost invisible interpanel seams. The door leaf is made entirely of panoramic panels with double glazing, the thickness of the glass unit is 2.2 cm. The panoramic sections are filled with:
- Composite panels are 2.2 cm thick, and polystyrene is placed between the embossed aluminum sheets.
- Double glazing 2.2 cm made of transparent impact-resistant acrylic.
Alutech doors are manufactured with different numbers of imposts, which allows you to choose the best option depending on the type of room. The manufacturer offers systems with:
- Standard sectional division, two imposts.
- One impost.
- Four imposts.
- Without vertical imposts, the maximum width of the structure is three meters.
Panoramic sectional doors come in different colors and are equipped with a closer and a lock. To ensure maximum protection against burglary, vandals, the structures are equipped with locks, household and deadbolt, and a drive release lock. To lower or raise the gate system manually, it is additionally proposed to purchase a chain gearbox.
Source
Optimal for a passenger car
Now let’s decide what size a garage for a passenger car should be so that you can not only park the car there, but also store spare parts, tools, a bicycle, fuel and lubricants and a spare set of tires. The length of such a building should be 3-3.5 m longer than the length of the car - this will be convenient for taking purchases out of the trunk, looking under the hood, and also a place for tires, a workbench and everything that does not fit on the balcony at home, will remain.
How wide is the garage? The optimal width of the garage should be the same 3 m greater than the width of the car, so that you can open the door comfortably without fear of scratching it. And there will be free space for shelves with things necessary for any motorist.
What height should the garage be? The optimal ceiling height in a garage is three meters; even a fairly tall passenger car can be safely driven under such a ceiling. In addition, such a height of comfort for a person allows you to arrange a mezzanine. If we recall the “Priora” from the previous example, then the optimal house for it will have a length of 7.35, a width of 5-6 and a height of three meters.
In addition, such a room is well suited “for the future”, since a larger car, even an SUV, can fit into it without any problems.
For jeep
By the way, about SUVs, because owners of private houses often prefer such cars - either due to status or out of dire necessity. What can you say about the size of a garage for a jeep? Here, as for a passenger car, you need to take into account the size of the equipment.
SUVs usually add significant length and height, which is why the room for them should be higher and larger. For example, let's take the ToyotaLandCruiserJ200, its length is 4.95 m, its width is 1.97 m, its height is 1.88 m. We take the numbers we know and add them, and as a result we get comfortable garage dimensions with a length-width-height of 8-5-3 meters.
It makes sense to make it 2-3 meters wider and a meter higher for greater comfort. If you are the owner of a particularly large jeep, for example, with a pike body, then the convenient length of the garage can increase to 10 meters.
For minibus
If you are the owner of a minibus or a GAZelle truck, then the size of the garage you need increases.
Minibus garage dimensions:
Let's calculate the dimensions of a garage for a gazelle with an extended platform. Its length is 6.7 m, and its height, including the awning, can reach 2.5 meters. Here the length of the garage should be about 10 meters, especially if you are going to not only store the car in it, but also carry out its repairs and loading and unloading.
In the latter case, it makes sense to make an extension to the room on one side, where it will be possible to store cargo separately from spare parts, oil and gasoline.
And, naturally, it is necessary to significantly increase the height of the garage for the gazelle, up to three and a half meters.
For a gazelle, garage dimensions - photo:
Panoramic gates, characteristics
Panoramic garage doors are one of the types of industrial sectional doors. Their difference from other models is the presence of transparent acrylic inserts that replace traditional sections. Transparent inserts allow daylight to penetrate into the room. Aluminum profiles and impact-resistant acrylic are used in the manufacture of structures.
Panoramic structures can be glazed with polycarbonate or cellular plexiglass. Gates are also differentiated depending on the type of glazing. Manufacturers offer the following varieties:
- Standard glazing and gate.
- Standard glazing and partial or full glazing.
- Continuous glazing with glass or polycarbonate with a horizontal dividing bar.
- Continuous glazing and dividing lintel located vertically.
- Quite light weight and high structural strength.
- Ergonomics, functionality.
- Resistance to corrosion and negative atmospheric influences.
- Reliability, high penetration protection, meeting Russian and European standards.
- Optimum light transmission guaranteeing maximum visibility inside the garage.
- Reliable protection against heat loss, which is important in winter, allows you to reduce the cost of heating the room.
- Safe to use in any situation.
The design is designed in such a way that it guarantees maximum finger protection against pinching. This is possible due to the fact that the thickness of the panel and the gate frame are the same, the shape of the heads guarantees maximum joining of the parts with each other. All possible varieties of the product allow them to be installed in rooms with a roof of any shape, ceilings of different heights, and low lintels.