Miscellaneous
To change the appearance of a room, it is not necessary to carry out large-scale renovations and change surface finishes. It is enough to change the design of those furnishings that affect the overall perception of the room. These include window and door openings.
The interior door plays a key role in the interior of the room. With its appearance, it can “pull out” an unsuccessful design or, conversely, ruin the entire impression of an expensive and stylish finish. The old panel interior door, which was inherited from Soviet architects, does not fit into the interior of the apartment after modern renovation. There are many ways in which you can radically change the door leaf and give it new life in an updated interior.
How to decorate old interior doors with moldings?
To change the appearance of a room, it is not necessary to carry out large-scale renovations and change surface finishes.
It is enough to change the design of those furnishings that affect the overall perception of the room. These include window and door openings. The interior door plays a key role in the interior of the room. With its appearance, it can “pull out” an unsuccessful design or, conversely, ruin the entire impression of an expensive and stylish finish. The old panel interior door, which was inherited from Soviet architects, does not fit into the interior of the apartment after modern renovation. There are many ways in which you can radically change the door leaf and give it new life in an updated interior.
Moldings on the walls
Wall moldings are not just strips. Frames are made from these elements, which can simply limit part of the space in which a mirror or picture will hang. This selection helps to more clearly organize the space and highlight the subject.
Pictures framed from moldings
Frames made from moldings can also be filled with other finishing material. Previously, tapestries, brocade and other expensive fabrics were inserted into such frames. Today, they are increasingly using a different type of decorative putty, wallpaper, or simply a different shade of paint.
Inside the molding frame is a different color
Another common technique is the design of doorways. In addition to the standard frame of the opening, there is also a frame above the door. This space usually remains empty and is not used in any way. To ensure that there is no imbalance during complex decoration, molding is also glued here.
Slats over the door
Using wall moldings, you can visually make the ceilings higher. To do this, strips are installed at a certain interval. You can use them not only to make frames. These are decorative strips and are not too difficult to create patterns with.
Molding patterns on walls
All these decoration techniques require a large space, otherwise the room turns out to be too “overloaded”. In small rooms, if they are used at all, it is usually only planks at the junction of the wall and ceiling, and maybe a couple of thin strips to separate different textures or colors. Most often you can see moldings in the interior of the living room - these rooms are usually the most spacious. Moldings look good in bedrooms, but not in small ones, but at least in medium ones.
Door decoration
After the door is cleared of old paint and its surface is leveled, you can begin restoration and decoration. There are many finishing options: veneering, painting, wallpapering. Any design can be combined with trim moldings.
Polyurethane molding with smooth profile
Molding is a part that is used to decorate any smooth surface. Its main purpose is to create decorative frames and focus attention on individual zones. This element is universal, as it is used in a variety of fields. Molding is used for finishing walls, ceilings, doorways, furniture, mirrors.
This detail will help make a boring door attractive and combine different types of furnishings into a single composition. To do this, you need to use molding not only on the door, but also to decorate other areas of the interior. In this case, the molding will act as a leitmotif, uniting the door and all objects into a single harmonious interior.
Decorative element
To decorate the door, use the same polyurethane molding that is used to decorate any other surface today:
Moldings for panel interior doors with an ornament are a decorative strip, the surface of which along its entire length is decorated with a repeating relief pattern (monograms, braids, flowers, bows, meanders). Decorative slats with a pattern create a surface with a rich texture.
Molding with a pattern
Molding with ornaments will allow you to recreate the interior of any historical era and add palace notes to the decor.
The molding, which has a smooth surface, is a strip with a continuous decorative profile. There are slats with convex, concave, one-sided and symmetrical profiles.
To form frames on the door, straight molding is combined with corner elements. A corner element is a decorative strip that has the same type of profile or pattern as a straight model, but is made in the form of an angle. Can only be used in combination with a straight bar.
Options for combining corner and straight moldings
Important! The patinated molding goes well with door handles and awnings.
Molding can imitate a paneled door. In combination with surface milling, an ordinary panel sheet will turn into an expensive paneled door.
If the interior of the room has a rich color palette, then with the help of molding you can easily match the surface of the door leaf. Using this element, the boundaries of the sections of the sash are designed, which will be painted in different colors.
To imitate a paneled surface, the door leaf is divided in height into three parts. The panels are imitated by two frames glued to the surface of the sash. A panel door with molding takes on an expensive and solid look.
Portal for an interior door decorated with moldings and other stucco moldings
A door with molding also requires appropriate finishing of the entire opening. Its design is carried out using another polyurethane stucco molding, which allows you to create a beautiful portal from an ordinary door frame:
Some elements (domes, rosettes) can be used to decorate the canvas itself. They are glued to the surface of the door leaf and framed with a frame made of molding.
Ceiling moldings
The ceiling is often decorated with moldings. A large empty square just begs to be decorated with something. Typically, corner molding is installed at the junction of the wall and ceiling. It can be thin and simple - with a simple relief, or it can be wide, patterned, like stucco. Moreover, this type of decoration is good not only for classic interiors. It fits into the loft and other modern trends, with the exception of minimalism, perhaps.
Modern style also goes well with moldings
In addition, several decorative fragments can be located on the ceiling. For example, several moldings of different widths, but with a similar decor and profile. They can be placed at a distance from each other. Often, decorative fragments in the form of curls, corners curved in the other direction, half-arcs and other similar decorations are used in the corners. They also put decorative ceiling rosettes under the central chandelier in classical interiors.
Read also: Can Plectranthus be brewed into tea?
But not only in the corner or near it can ceiling moldings be mounted. With their help you can create a unique ornament on the ceiling. Geometrically correct figures are created using polyurethane or gypsum planks. Using flexible molding you can create smooth lines.
There is another technique - a coffered ceiling. This technique is usually used if you need to hide beams or some kind of flaw in the ceiling. In this case, moldings are also often used for decoration.
A coffered ceiling can hide beams, pipes and other unsightly elements
Recently, in most cases, polyurethane moldings are used in the interior. They are durable, easy to install, and not too expensive. All this makes them very popular.
Molding trim
First, the canvas is drawn on paper and the layout of straight, corner and other decorative elements is indicated. The pattern can be any, but you need to be careful not to overdo it and not pile up too many shapes and patterns. The pattern should be proportional to the shape of the sash.
To complete the decoration, you will need to purchase straight or patterned slats and corner elements. Their number is calculated according to the completed drawing.
The door is marked using a long metal ruler and a pencil. Cutting the polyurethane decorative strip is done with a hacksaw blade or a stationery knife. For additional fixation of large decorative elements, you can use thin nails.
Marking the drawing
For ease of work, the canvas is removed from the canopies and laid on a horizontal surface. First, you need to mark an indentation line around the perimeter of the sash. Visually, this will create the appearance of racks and make the door look like a paneled door.
For a standard canvas, the indentation on the side and top is 150 mm, and on the bottom – 250 mm. The bottom "crossbar" should look wider. Then the lines of future frames are drawn. This will create a marking according to which you can lay out the molding on the door.
Layout of corner elements
Corner elements are placed on the door at the corners of the outlined frames. After this, measure the distances between them along the perimeter of the frames.
Straight slats are cut to these dimensions.
Important! Instead of polyurethane decorative slats, wooden molding is often used on an old panel door. To trim it, you will have to use a miter box, since corner elements for wooden slats are not sold, and in the frame they are joined at an angle of 45 degrees. Of all the options for decorating a door, this is the simplest and most affordable.
Fixing the ornament
The frames are assembled one by one. Each part is coated with glue and placed on the surface in the marked place. First, the corner elements are attached, and then a straight part is inserted between them.
An ordinary panel door after decorating with a figured strip
The few minutes it takes for the glue to initially set are used to align each part.
To ensure that the molding stays well on the surface and does not fly off when slammed tightly, it is additionally secured with nails. If the caps are small, then they are not bitten off. The nails are driven into the canvas with the head recessed into the body of the slats, followed by putty.
Finally, the molding can be patinated or highlighted by painting it in a contrasting shade. This design will make the door especially elegant.
Video on how to decorate a door:
Interior doors with molding will become a bright decoration of the house and will make the interior stylish and non-standard. Decorating with molding in combination with other decorating methods is easy to do yourself, and it becomes an economical alternative to expensive designer models from the store.
Source
What are moldings and what are they like?
Molding is a decorative strip of convex or concave shape. It is used for decoration, harmonization of interiors, visual correction of room defects. Moldings can be narrow - a couple of centimeters wide, and wide - up to 20 cm. They are used for interior and exterior decoration, and can be rigid or flexible. They come with a longitudinal relief (most often), with floral or geometric patterns.
Depending on the installation location, moldings can be ceiling, wall, or corner. Corner ones are usually placed at the junction of the wall and ceiling. Moldings are made from:
- Foam plastic. The cheapest. They have a slightly loose surface, so they are only suitable for puttying and painting. Attached to a flat wall using glue.
Moldings in the living room interior are a very common type of decor.
Only a small part of the options with patterns
Plaster moldings appeared in ancient times. They became the model by which decorative strips for interior decoration were created from more modern and cheaper materials - foam plastic and polyurethane.
Options for finishing and design of the doorway
Owners get rid of balcony and interior doors for various reasons. This interior solution allows you to partially change (improve) the layout of your home, expand the space, give the room an original style, an unusual design; Each owner pursues his own goals. But what after dismantling the box? After all, if you do not properly design a doorway without a door, then the renovation of the room cannot be considered complete. How and with what can this be done?
Options for framing an opening with and without doors in an apartment
Framing a traditional opening involves installing a door frame and door leaf. At the same time, the size and appearance of the door can be absolutely any. This is the most common design for entering a room. The door is used to separate rooms; it performs the function of sound insulation and thermal insulation.
But many decide to design a doorway without a door. The door structure is abandoned in the case when the entrance does not lead to a bedroom, nursery or other room, but to a more public room, such as a dining room, living room, hall, kitchen.
Thus, all these rooms unite and make the atmosphere in the house more comfortable.
Decor options
If you approach the issue of decorating the passage between rooms competently, you will have to solve a twofold problem.
Geometry
The opening in which the door is dismantled is an arched structure. If you choose the right shape, this is an additional plus to the design solution. Categorizing varieties is complex; Sometimes the differences are only in small details. The main types are as follows.
It is advisable to install arches in the classic style at the entrances to the hall and kitchen. In a private house they are also installed on verandas and greenhouses; in fact, it is one of the universal design solutions.
What is not recommended:
Trapezoid. According to professionals, this form has a depressing effect. It visually lowers the ceiling and moves the walls of the room towards the center. Even though the decoration of such an opening is somewhat simpler, this design solution is applicable only for spacious rooms, the design style of which is dominated by broken lines.
Materials used
A definite plus is the naturalness and durability of the material. But framing an arched opening using this technique is not always possible due to the weight of the samples; the load on the floor is large. In addition, the work is characterized by complexity, expressed in the need to select stones by size, process them and fix them on the base.
Clinker tiles. Used for exterior and interior decoration; no “chemistry” combined with durability explains the popularity of the product. The weight of the tiles is insignificant, they are flat and angular, and are attached with an adhesive. This makes it easier to cover the arch. The downside is the small selection of shades; you will have to think about how to diversify the design.
Fake diamond. The best option for finishing the opening. Such tiles are made using the technology of molding chips of natural rocks, to which dyes are added; sometimes a series of granular polymers. This allows you to diversify the range of products by texture, geometry, and shade. The choice is sufficient - imitation of expensive stones (jasper, malachite), limestone, shell rock, so-called “wild”, unprocessed samples.
Features of the design of the opening with piece products
Stucco molding looks classic, but does not fit every opening. With this finishing option, you need to take into account the interior of the room. If the style is metallic, hi-tech, art deco or something else modern, then stucco will definitely not fit into the overall design.
Natural stucco is used extremely rarely in residential buildings, and there are reasons for this. The base is gypsum, therefore, it is heavy, difficult to fix in the opening, fragility of the fragments and the ability of the material to absorb moisture. The latter involves additional finishing processing.
Artificial stucco. There are enough advantages of this polyurethane imitation - low weight, inertness to moisture, a huge range. Fragments from PU are supplied to the market in various sizes, patterns and designs - panels, decorative slats, pilasters, borders. If the layout of the opening design elements is drawn up correctly, finishing by gluing products is not difficult. In addition, polymer moldings are easy to paint, hold varnish, and therefore are used in openings leading into any room, even with excess humidity. An additional advantage is the low cost of samples.
Panels. Finishing the opening in this way is a good option, since you can choose a ready-made kit (extensions + trim) for an arch of any shape and geometry; the assortment allows.
Plastic. The most popular material due to its low cost and ease of attachment to the base. Light weight, a variety of modifications of samples, the presence of locking connections - these are all positive aspects, as well as easy care of the arch. The downside is that the opening, trimmed with plastic panels, will have to be regularly restored, or even replaced with individual fragments. The material is easily scratched, and it is not always possible to level out this defect. The tendency of polymers to undergo thermal deformation also plays a role. For an opening into the kitchen this is not an option.
Tree. Durability, quality - this method of arch design has many advantages. Wood lends itself well to restoration, and it is not difficult to change the tint and even the pattern - there are well-established technologies. With the right choice of lumber (by density), temperature deformation can be avoided. The only negative is the cost of expensive breeds. But this is not an obstacle either - brushing, bleaching and a number of other techniques help give the tree a different look; the list is large. If the main criteria are the durability of the decoration of the arched opening, the ability to change the style, color design, then cladding with wooden panels is the best choice.
Useful tips
When choosing an opening design option, you need to focus on the design of the room. The discrepancy between styles does not give the desired effect and introduces a certain dissonance into the perception of the interior.
The specifics of the room are also important. This applies to regular maintenance of surfaces, including the opening. When choosing finishing materials, it is advisable to take into account how difficult they are in terms of cleaning, washing, and so on. If we are talking about the passage between the kitchen and the hallway, it is hardly worth considering the option of textured cladding. And decorating with stucco with a pattern is also impractical.
When the details are carefully thought out, finishing a doorway without a door with your own hands is not something difficult. And small mistakes turn out to be a plus - they can be perceived as part of the idea in terms of originality of the design. But at one stage - preparation - advice from a professional will not be superfluous. If the opening is in a load-bearing wall, then determining its geometry is possible only on the basis of engineering calculations.
Source
What is decorative molding?
The long-familiar platbands, panels, baguettes, and carved borders are called moldings.
A general definition has been given to overlay elements for the artistic design of smooth surfaces of walls, ceilings, framing of openings, arches, decorating furniture (for example, a fireplace), and door panels. Unlike traditional wooden baseboards and gypsum stucco, modern molding is made from polystyrene foam, polystyrene foam, polyurethane, and metal.
Decorative overlays are produced in various configurations, sizes and sections. Innovative technologies for manufacturing cast parts make it possible to imitate natural materials such as wood, gypsum, natural stone and even precious metals. Using water-dispersion paints and special coatings, you can paint polymer molding in different colors, and also change the surface texture if desired. Lightweight elastic elements are used as ceiling plinths under suspended ceilings, decoration of building facades, and car bodies. Decorating walls with wallpaper and moldings is actively practiced in interior design.
Why do you need molding?
Its main purpose is to separate one surface from another. For example, baseboard is used to separate a wall from the ceiling and floor, and limit molding is used to separate a wall with one type of finish from another wall.
The second purpose is to cover cracks, ends and joints. This purpose is fulfilled by door frames, linoleum moldings, and corner joints in various finishing systems. The third application is to use it to decorate a room.
For example, an ordinary arch in a house does not look too flashy and is already ordinary. However, if you decorate it with the help of molding, you can emphasize this element and highlight it from the overall picture of the room.
A small room can be visually made more spacious by installing longitudinal moldings along the walls - this will make them appear longer. Conversely, too large a surface can be divided into parts by decorating it with crosswise moldings.
Types of door moldings
You can update the door leaf and frame the opening with original platbands thanks to modern types of molding. The surface of decorative parts can be smooth or textured. The choice of design elements depends on the overall style of the interior and the materials from which they are made. Wooden door moldings are used in classic room design.
This finishing option harmoniously combines with tapestry wallpaper, baguettes, panels and furniture made of precious wood. The patterned overlays of the door leaf and the details of the carved platbands are covered with gilding or foiled with gold leaf. Baguettes, pilasters, capitals, rosetons, crowns and carved panels are an incomplete list of the range of polyurethane moldings. All these varieties are used to decorate entrance and interior doors. Overlay parts made of lightweight and at the same time durable material give surfaces an original look due to unusual shapes and textures.
Please note: metal molding is more often used for entrance doors due to the possibility of damage to external surfaces and adverse environmental influences.
Smooth and figured platbands and panels on the door leaf can be coated with water-based paint to match the wall decoration or the frame can be highlighted with contrasting colors. The advantage of this finish is the ability to repaint the surface of the door and frame of the opening depending on the change in the interior of the room.
Read about installing and finishing door slopes with your own hands in this article.
The following article talks about how to choose an entrance door.
Cashing the opening of interior products
A variety of methods are used to frame a doorway; these can be either natural materials or their artificial analogues.
Read also How to reupholster a spring sofa with your own hands step by step
Often used:
- Plastic materials (PVC);
- MDF panels;
- laminated chipboard;
- Tree;
- Polyurethane.
As a rule, this part of the room is framed with wood. Very often, wooden platbands are made from spliced wood. Moreover, pine very often acts as a source of wood, since it is durable. Wooden frames are usually coated with a layer of varnish; it looks very noble. Telescopic cashing is also very popular.
The carved cash looks beautiful. As a rule, carvings are made by craftsmen with their own hands, and each such pattern can be very elegant and unique. MDF trims are more affordable. But at the same time they are not considered to be of lower quality and durability. They are absolutely not susceptible to rotting and many external influences.
The only negative feature of this material is that it does not withstand moisture well. The easiest way to care for plastic trims. They retain their original appearance for many years. As a rule, plastic trims have the most interesting and bright design.
They are able to retain their color for a long time.
Plastic is completely insensitive to humidity and temperature changes. If you want to route electrical wires and cables through the doorway, a PVC frame would be an excellent solution. This casing has a special cable channel that simplifies this process. Some models look very luxurious due to the fact that they imitate wood patterns in appearance. In general, PVC completely replicates the quality characteristics of plastic.
Platbands are also divided by appearance. Their width can be any, as well as thickness.
All of them are divided into:
As a rule, these types of platbands are mass-produced in factories.
But carved platbands are a separate type, which is a product of the master’s hands, distinguished by its uniqueness.
Decoration with decorative stone
A decorative stone can decorate any doorway. Very often it is used after installing an iron door. It is able to hide any imperfections and transform the appearance of the opening. Decorative stone is quite durable and looks very elegant.
It is resistant to external influences and looks great in any lighting. During the day it will sparkle in the sun, and in the evening it will sparkle luxuriously in dim light. Decorative stone is now used to decorate the passage using adhesive installation.
A decorative analogue of natural stone is lighter and more affordable in cost. You can choose a model of absolutely any color and texture. So, you can decorate the passage with a wide variety of pebbles, creating a unique pattern. The decoration of the corners with decorative stone in the Roman style looks beautiful.
Also, many decorate the opening using the torn edge technique. It involves laying stones in a chaotic, not perfectly even order.
This way you can even create the effect of antique masonry and lay out any fancy shape.
Plaster
Plaster is now very often used to emphasize the bizarre shape of an arched partition. In this case, decorative relief plaster is used. It is also combined with other finishing materials, such as artificial stone and tiles. Venetian and microcement plaster are also used as finishing, since such cladding looks very elegant.
But not everyone can finish a doorway in this way; for this you need to have special skills.
Wallpapering
Using wallpaper, they decorate not only the doorway itself, but also the door leaf. Moreover, in the second case, the wallpaper that is most resistant to external influences is used for this, since the door is very often touched with hands. The simplest wallpaper can get dirty very easily, so it is important to use only high-quality and durable coatings. Wallpaper allows you to completely disguise the door, thus hiding the opening.
You can cover the canvas with wallpaper of the same color and pattern as all the walls adjacent to it. This finishing option is very often used to decorate the passage to the office. If you have an embossed door installed, you can only partially cover it with wallpaper. Using wallpaper you can even create designs on the door leaf. In this case, you can cut out geometric shapes and other fragments from them.
You can also use wallpaper to highlight the door leaf by contrasting it with bright wallpaper that differs from the color of the walls. Moreover, such a coating can be partially painted to make it more unusual and interesting.
Arched structures are also decorated with wallpaper.
Decorating doors with moldings
Preparatory activities
It is important to know: the chemical method of removing old coating is used outdoors or in spacious workshops (for these purposes you can use a garage with an open gate).
Decorating a door with polyurethane molding
Builders advise: it is better to lay the door for sticking the molding on the floor, then the created pattern will be clearly visible and can be easily adjusted.
Applying an artistic coating to door molding
Recommendation: if cracks appear on it after applying the coating, apply varnish to them with a thin brush and press the foil again.
There are many options for decorating interior and exterior doors. It all depends on the general style of the interior and the imagination of the owners. Monochromatic painting of doors and trim is suitable for a minimalist or Japanese style in the interior, patination of surfaces for Provencal, bright highlighting of moldings with natural patterns for an ethnic style.
For a photo selection of beautiful interior doors decorated with moldings, see the following video :
Source
Where can they be used?
Moldings in the interior are used in the following cases:
- To harmonize the interior. Smooth empty walls and flow are not always attractive. The use of moldings allows you to make the interior more harmonious.
- To separate colors, materials, textures on walls.
In classic interiors, molding is a tradition
The main function that moldings perform in the interior is decoration and decoration. At the junction of materials with different thicknesses, textures, and colors, this method of decoration allows you to turn an unaesthetic transition into a decorative element. The method is easy to install, most of it has a low cost.
Preparing the opening
The process of preparing the work surface varies due to the materials chosen as finishing.
Leveling with plasterboard without frame using glue
Recommendation for everyone who carries out repair work with their own hands: be sure to use a primer to create the best adhesion to the wall surface and decorative mixtures.
Types of finishing materials
The choice of materials for finishing a doorway on the construction market is extensive; there are both economy-class options and expensive alternatives. Everything depends directly on the needs, desires and capabilities of buyers, as well as several important aspects:
Using the example of the most popular options for finishing a doorway, we will consider in more detail the workflow for each of them.
Plaster
This option can be called the most popular due to the simplicity of the work and the practicality of using the finishing material.
The only thing you should take care of before starting finishing is to cover the floor with film or newspapers so as not to damage or contaminate the surface.
It is important to remember that the thickness of one layer should not exceed 2 cm, otherwise voids or cracks may form, and this will negatively affect the durability of the finish.
(function(w, d, n, s, t) w[n] = w[n] || []; w[n].push(function() Ya.Context.AdvManager.render( blockId: “RA- 510923-1”, renderTo: “yandex_rtb_R-A-510923-1”, async: true >); >); t = d.getElementsByTagName(“script”)[0]; s = d.createElement(“script”) ; s.type = “text/javascript”; s.src = “//an.yandex.ru/system/context.js”; s.async = true; t.parentNode.insertBefore(s, t); >) (this, this.document, “yandexContextAsyncCallbacks”);
If everything is met, all you have to do is wait until the surface has dried, and you can start finishing: painting, wallpapering or applying decorative mixtures.
Clinker tiles, mosaic
This material is intended for cladding a variety of areas of a residential building, including the doorway. There are no special installation rules; options are offered depending on the interior design:
Covering a doorway with tiles or mosaics does not require any special tools or special skills; the work process consists of step-by-step actions:
Scheme for laying clinker tiles
To ensure that the products are fixed evenly on the surface of the opening, you should prepare plastic beads in advance, which are inserted into the seams between the tiles. It is removed after the adhesive mass has hardened, no earlier than 24 hours later.
It is very important that if glue gets on the surface of the tile, it should be removed immediately, since the hardened mass is very difficult to remove.
When the opening is completely ennobled, the seams between the tiles are sealed with special grouts, the color of which is matched to the tone of the walls or finishing materials.
Decorative rock
Another option that is used as an alternative to clinker tiles is decorative stone. It has several advantages over other finishing materials:
The installation process is very similar to laying clinker tiles, but there are several important points that should not be forgotten:
This finishing material comes in two types:
Wooden panels, MDF
An equally popular option for finishing door slopes are wooden or MDF panels laminated to resemble wood, which harmoniously fit into the classic style. The advantages include:
The process of installing panels made of wood or MDF will require you to purchase additional materials - wooden slats that will be used as sheathing:
Photo instructions for finishing the opening with MDF panels
To hide the fasteners, you can use special furniture wax or adhesive plugs, matching them to the color of the panels.
This finish will look rich, even if inexpensive MDF panels with a textured pattern imitating exotic wood were used.
Laminate
Many finishers love laminate for its flexibility, which allows this material to cover almost any openings, corners and nooks found in residential premises. The only thing worth worrying about is that it does not tolerate moisture well and after contact with water, swelling may form at the ends of the products, and such defects cannot be eliminated.
The laminate is attached using self-tapping screws to the sheathing in the same way as finishing with PVC or MDF panels.
If the walls are relatively smooth, then you can use liquid nails and spacers, which will press the material to the surface of the walls for several hours.
Stucco molding – gypsum and polyurethane foam
One of the most interesting, but in its own way capricious materials is stucco. When using it in the interior to decorate a door opening, you should maintain a single concept of the overall design, fit it into the style of columns, pilasters with capitals and other similar decorative elements.
The stucco molding on the opening should be combined with other interior elements, for example with floor and ceiling plinths
There are two types of stucco on the construction market:
The advantages of polyurethane foam decor also include:
Stucco molding looks ideal in the frame of a doorway with an arch, especially if the width allows the erection of monolithic column supports along the edges.
Moldings in the interior: photos, ideas
When decorating rooms with moldings, it is necessary to take into account not only the geometry of the room, but also the design style of the furniture. Decorative strips should have common features with the design of other interior items. Then the design will be consistent and harmonious.
You can insert beautiful wallpaper into molding frames
Wall moldings can be painted to match the walls. In this case, the moldings are not too noticeable, but the interior looks more harmonious
With the right approach, and in a modern style, moldings, and even patterned elements, are not superfluous
If the ceiling were just white, there would be obvious disharmony - too overloaded walls, and an empty ceiling
In a long and narrow hallway, frames visually expand the space
So that the wall is not empty
It's hard to think of another way to decorate
Wall moldings in the form of frames
If you need non-standard decorations, use moldings
The style of moldings should be consistent with the style of furniture design
Doors and wall decorations in one format
Moldings in the living room interior
There doesn't always have to be a lot of them
For spacious and bright rooms
In bedrooms, you should be careful with moldings
Molding decoration is used to decorate walls. With their help, a variety of shapes are created, which can later be designed in different styles.
Molding is a decorative element that looks like a strip with volume. The width and shape vary, and the length, as a rule, does not exceed 2 m 40 cm. The profile of the molding can be simple, almost flat, or convex and complex, including small decorative elements.
Molding decoration is used to decorate walls. With their help, a variety of shapes are created, which can later be designed in different styles. They can be combined with wallpaper, paint, MDF parts, decorative or Venetian plaster. Decorating with moldings is justified in large areas; in this case, they help visually break up wide and long planes into smaller areas and zone the room.
Doorway shapes
Finishing openings between rooms without a door is complicated not only by the choice of material used, but also by what shape this very opening will be.
The solution to this issue will affect the harmony of the transition between rooms, the lighting of the rooms, the combination of styles in the interior and the practicality of movement.
Rectangular
A common option is rectangular. Such an opening remains immediately after dismantling the door frame and it has its advantages:
A wide rectangular opening allows the slopes to be used as niches for interior items
Arched
The arch has an interesting ability: in rooms with low ceilings it visually raises them, and in cases with high ceilings, on the contrary, it lowers them. Moreover, the wider the arch-shaped opening, the lower the ceiling appears.
Many people prefer this option for its softness and lack of sharp corners, which makes transitions between rooms more invisible. The arch fits perfectly when exiting the hall; if it is wide enough, the movement between rooms will be imperceptible.
The absence of massive doorway decor emphasizes the beauty and complexity of the rest of the interior
A nice addition are ready-made solutions - arched extensions, prepared for installation in doorways.
Extensions and developed edging of the opening emphasize the complex shape of the opening, placing a visual emphasis on it
Trapezoidal
This form is used very rarely, due to the fact that in small areas such a solution has the opposite effect: the room does not expand, and the ceiling visually lowers. Especially in cases where the upper horizontal part of the trapezoid is too narrow. It may seem that when decorating the opening they wanted to make an arch, but did not have enough strength and skills.
Such an opening looks good when it matches the shape of the room located behind it, as in this picture
The polygon will fit well into the passage where double-leaf interior doors were planned or installed. Using drywall, you can easily and effortlessly turn a rectangular opening into a smooth trapezoid by securing it at the corners of the opening.
Asymmetric
A doorway that embodies the fantasies of the owners of a living space is an asymmetrical shape. Designers love it for its ability to bring the most amazing solutions to life. The opening ceases to be the boundary of two rooms, it turns into a decoration of the apartment, into an element that attracts the eye and emphasizes the given style.
An asymmetrical opening is the highlight of any interior
However, there are nuances here that many people forget about and encounter difficulties during the work process:
Installation
When decorating walls with moldings, they are glued onto a previously prepared surface with the reverse, flat side. Be sure to check the fit - it must be tight. If you plan to have a complex design with moldings , you must first apply a drawing to the wall, according to which the installation will be carried out.
Moldings for wallpaper stickers are pre-painted in the chosen color; in other cases, they are first pasted and then the final finishing is carried out.
Many people want to diversify their interior. In addition to transforming the room itself, many try to highlight the doorway, using a wide variety of methods. The design of the doorway is the first thing guests will see when entering the room. They will definitely pay attention to him. Therefore, it is important to know how to highlight this part of the interior.
Decoration with curtains
A simple but very interesting option for decorating a doorway using curtains is a look into the past. Several decades ago, people demarcated their living space in this way, decorating the passage with wooden or fabric curtains. The desired effect was achieved: the boundaries of the room were visually outlined, without creating a closed space.
Curtain - a simple and effective solution
But similar solutions are still popular now, but the variety of shapes and materials has become much greater. The most commonly used are bamboo sticks, which are very durable and produce a pleasant sound when colliding with each other. You can paint them yourself in the desired shade or choose a ready-made option to suit your interior.
You can use curtains anywhere, even on the border between the hallway and the bathroom, although this is a little intimate, but if home owners are interested in this option, then why not experiment.
Source
Finishing features
A doorway is very often finished without installing a door leaf. In this case, you can save a large amount of money on the purchase of a door structure and its installation. This finish is distinguished by the fact that it is very diverse and original. Most of the apartments have ordinary doors, and this way you can diversify the interior. A special doorway can become the highlight of any interior.
A doorway can blur the boundaries between rooms , but at the same time separate them. This design can make the room visually wider and more spacious. The finishing is also distinguished by the fact that in this case the doorway is not necessarily designed in a classic rectangular shape, as is the case with door structures, but preference is given to other shapes. For example, you can make a dome-shaped, rounded, diamond-shaped, trapezoidal passage.
The doorway is also designed according to the closed type principle. In this case, it is filled with screens and partitions. This solution is perfect for zoning rooms and highlighting different functional areas. A peculiarity of the decoration of the doorway is that it always initially has the shape of a rectangle.
You can change its shape with fancy patterns without having to carry out complex installation, which is a big advantage of this design.
The decoration of the doorway can complement the interior design. Thus, strict standard forms are more suitable for classical styles, while newer and more unusual solutions are used for modern interiors. This design can have any complex geometric shape.
Another feature of finishing is that it is carried out in one stage. After this, you will not have to maintain the structure, as is the case with doors. When designing and finishing, you can use absolutely any materials; there are no restrictions on this. In addition, the finishing is distinguished by the fact that it is quite simple; anyone can do it themselves.
A doorway can have doors, an arch, or curtains.
The principle of its design is divided into two large groups:
