Capital buildings are built to last. In extreme cases, for many decades. Initially, it is difficult to predict which layout will be relevant over time. A way out of the situation was found in structuring architectural spaces to meet the requirements of the current moment using partitions. PVC partitions allow you to quickly and cheaply transform existing premises into what is required today.
Plastic partitions
Plastic partitions for offices at low prices per m2. You can order partitions from us, and since our company is a manufacturer, this makes it possible to quickly and inexpensively fulfill large volumes of orders. We also carry out assembly and installation of structures. The most popular type of partition is double-glazed partitions; they are low cost and easy to install.
How to install sliding plastic interior partitions
Installation of plastic partitions is carried out according to the standard scheme:
- The partition received from the supplier is unpacked. The compliance of its configuration and dimensions with the technical specifications is checked. The availability of fittings and fasteners is checked, as well as their compliance with the specification.
- In the room, lines are drawn along the walls, ceiling and floor, indicating the axis of the metal-plastic profile. Holes for dowels or anchor bolts are drilled along this axis at intervals of 25–30 cm. Anchors are used in the case of installing multi-chamber double-glazed windows and thick metal-plastic profiles. For single- and double-glazed windows and their corresponding profiles, plastic dowels and self-tapping screws screwed into them are enough.
- The joints of the partition with the floor, ceiling and walls are laid with elastic compensation tape and covered with skirting boards that hide minor defects.
- Double-glazed windows previously removed from the partition are inserted. Hinged or sliding doors are hung.
The instructions given are of a general and advisory nature, since they cannot cover the existing variety of design features of PVC partitions. The design of each specific product makes appropriate changes and additions to it. Thus, a movable partition on legs, after assembly, can simply be placed in its designated place.
Plastic partitions are a simple and effective way to zone a room
Plastic partitions or PVC partitions, used to divide space, are one of the most popular and affordable in Moscow offices. Lightweight and durable, they have good soundproofing properties, allowing you to create comfortable working conditions for employees. On our company’s website, plastic partitions are presented with transparent, solid or combined filling. They can be mounted at any angle and are easy to install.
From us you can order systems made of monolithic plastic, panels or profiles of various sizes and configurations, or buy ready-made structures. Among our models there are both intended for office and residential premises.
What kind of plastic partitions do we make?
The company's product range includes the following types of PVC dividing structures:
- with door;
- transparent;
- combined;
- with decorative films;
- deaf.
Plastic glass partitions are in greatest demand. Insulating glass is used as filling in such models. It is important to know! Completely transparent partitions are not always comfortable for office employees, so frosted glass or blinds are often used. You will find a large selection of color solutions for plastic and glass-filled products with us. They provide unlimited possibilities for creating a unique room design, and their affordable price makes them in demand among potential clients.
Source: ofisnye-peregorodki.com
Why are sliding partitions needed?
Plastic partitions of this type are radically different from others in their mobility. The symbolic division of the open office is easily modulated with sliding structures. Open partitions unite the workspace and contribute to:
- Effective employee communication;
- Free movement of visitors;
- Creating a unified atmosphere.
OpenSpace's democratic policy does not exclude responsible moments “behind closed doors.” A sliding partition allows you to quickly:
- Isolate part of the space from unwanted visitors;
- Get a separate room for a meeting or conference;
- Maintain the confidentiality of what is happening.
Transparent partitions are often equipped with blinds to control the visual accessibility of what is happening “behind closed doors.” Movable walls allow you to combine office space by removing the partition into a specially designated area.
Lightweight partitions made of transparent plastic are especially popular. Their presence does not negatively affect the visual perception of space. This allows for maximum density of jobs. Good visual accessibility is in demand among management. This makes it easier to control the work environment and be aware of what is happening.
Office partitions made of glass and aluminum for organizing internal space
RUB 1,950 for 1 m 2
In 1 hour you will receive a cost estimate for partitions and doors made of tempered glass at a price starting from RUB 1,950. per m 2
* Record the time after contacting the manager
High-quality office partitions made of glass and aluminum are a necessary element of any modern office. Thanks to these designs, it is possible not only to correctly distribute the internal space, but also to organize the efficient work of office workers. Partitions are installed to divide the common space into comfortable work areas.
What are frame partitions made of?
Prefabricated office partitions made of glass and aluminum are a separate frame structure, which consists of various elements and is self-supporting. A double-glazed window consisting of laminated glass is installed in a supporting metal frame. The assembled structure is lightweight and has good strength.
- High strength
- Ability to transmit light
- Good decorative qualities
- Ability to change configuration
- Durability of materials
Branded office partitions made of high-quality glass and aluminum are manufactured in several types: stationary, solid, sliding and mobile. Each type is adapted for installation in an office, and the designs easily fit into the overall design even with a small room area.
Types of profiles used
For the manufacture of office partitions, the most modern and high-quality types of materials are used, which undergo mandatory technical testing. The products are assembled from AD1 and ADS metal profiles ranging in size from 20 to 150 mm.
Metal profile dimensions:
| General purpose | Size, mm |
| Frames for glass and decorations | 10-30 |
| Profile partitions | 30-75 |
| Load-bearing frame elements | 100-150 |
| Decorative details | up to 15 |
The average thickness of a metal profile is 0.3-3 mm, depending on the intended application. Load-bearing structures are made of metal profiles with a wall thickness of at least 1.6 mm. In this way, it is possible to ensure sufficient lightness and load-bearing strength of the structure.
Types of glass installed
Office partitions are equipped with high-quality glass, which performs a protective, enclosing and brightening function. Thanks to the high percentage of transparency, the structures provide up to 90% of the light in the office space, which has a beneficial effect on the efficiency and convenience of employees.
Types of glass used:
| Name | Thickness, mm |
| Optivite | Up to 12 |
| Matte | 5 – 8 |
| Float | 5 |
| Bent | to 10 |
| Mirror/textured | to 10 |
For partitions, various types of decorative glass are selected, which are distinguished by their unique design and good light transmission, which is important for office premises. The surface of the glass may have patterns, special coating and other decorative elements.
Source: www.glasstroy.ru
Types of plastic panels for wall decoration
This type of finishing material is made from PVC - polyvinyl chloride. In a semi-liquid state, this polymer is squeezed into a mold. A drawing is applied to the finished panels. It can be first printed on film, then glued and varnished (laminated panels). Moreover, these panels may not have a smooth, but a textured surface. The design applied using this technology retains paint for a long time, but similar materials cost about twice as much.
Several samples of laminated PVC panels for wall decoration
Another technology is to apply the design directly to the plastic, then cover it with two layers of varnish. Cheaper technology, but the service life and quality of the drawing are lower.
Ceiling and wall
There are two types of plastic panels - for ceilings and for walls. Those intended for the ceiling have a thickness of 5 mm and thinner partitions, and those for walls have a thickness of 8 to 10 mm and thicker walls and partitions. You can determine which species is in front of you by looking at the cut. This type of finishing material is distinguished by the fact that it has a smooth surface and, when joined tightly, the seams are not very noticeable.
Plastic panels for wall decoration
There is another standard size, which is also called plastic lining - with a thickness of 10 mm, the panel has a width of 10 cm and shaped edges that are more characteristic of plastic lining. If you decorate the walls with this material, the surface will not be flat, but embossed, similar to wooden lining.
Sizes and prices
The width of plastic wall panels is most often 25 cm and 37 cm, length - 2700 cm and 3000 cm. There are other non-standard sizes, but these are the most common. There is quite a wide variation in price - it depends on the wall thickness, type of printing, manufacturer, complexity of the design, etc.
Thin PVC wall panels
Above we discussed products that consist of two layers of plastic connected by jumpers. Along with a lot of advantages, they have a rather serious drawback: if you apply enough force, they can be pushed through. This is often the reason for refusing to use them. Therefore, thin plastic wall panels appeared on the market not so long ago. Their thickness is 3 mm and there are no cells. Only a layer of plastic with a pattern applied to the surface. Accordingly, there is nothing to push. The dimensions of this type of panels are 950 * 480 mm or so.
Their installation method is different - they are glued to the walls. Due to the fact that this finishing material has a very small thickness, it is cut with scissors and, moreover, takes up very little space from the room - 3 mm.
Plastic partitions for office
Functional PVC office partitions are the optimal solution for rooms in which a large number of people work at the same time. Plastic structures are easy to install and light weight, which allows you to carry out all the necessary installation work without additional permits. The materials used may have different colors. Prices do not include the cost of delivery and installation of products.
Catalog of office PVC partitions
Combined from RUB 36,000
Combined with blinds from RUB 36,000
Glass from RUB 36,000
Glass with blinds from RUB 36,000
Glass with stripes from RUB 36,000
PVC partitions with sandwich panels 10-24mm from RUB 29,000
Our company presents a wide range of modern solutions for advanced offices. You can choose the most suitable option in terms of price and functionality, based on your basic needs (desired degree of insulation, materials used, etc.).
In the presented catalog you can purchase plastic partitions for office premises of the following types:
- Glazed. The models use durable single-chamber double-glazed windows or glass, the degree of transparency of which is determined individually. We offer completely transparent or frosted glass inserts, as well as additional installation of blinds for independent regulation of the light transmittance of the structure.
- Deaf. To fill the profile structure, opaque sandwich panels in various colors are used. The reinforced frame allows the production of fences of any size, without the risk of subsequent operational deformation.
- Combined. This version of the partition combines the functions of transparent and solid models, due to partial glazing, the use of sandwich panels and inserts of transparent or frosted glass, the use of blinds and various types of draperies.
What types of sliding plastic interior partitions are there?
Sliding plastic partitions differ not only in design, but also in purpose. There are:
- Office partitions. They have different heights and degrees of transparency. It all depends on the specifics of the office. A simple and inexpensive way to change the transparency of a partition is to use blinds:
Options are available with table-top arrangement of partitions that enclose workplaces:
The photo shows the clamps securing the partition to the table top. Even the most inveterate “nerd” can cope with such a fastening! Partitions with legs are used when it is necessary to frequently change their location.
- In residential premises, movable partitions are used when it is necessary to provide for the possibility of transforming the volumes of the home with a change in their functionality. In a studio apartment, such a partition can separate the kitchen space
or sleeping area:
Another area of application for PVC partitions is bathrooms. They fence off shower stalls:
as well as toilets:
.
Note to the DIYer! After the renovation, there were scraps of PVC pipes left. This is not trash! A little imagination, and literally out of nowhere an original and unique PVC partition appears!
Doors for plastic partitions
In the catalog you can order the following door models:
- Single leaf. On hidden or standard hinges. They are made from a reinforced plastic frame, which is filled, at the client’s request, with double-glazed windows, glass or blind inserts made of sandwich panels. In addition, it is possible to produce a combined fabric (glass + sandwich panel).
- Bivalve. On hidden or standard hinges. They do not have a vertical impost, due to which the opening opens to its full width. Models are presented in transparent, solid and combined versions.
Here you can additionally choose any fittings – handles, closers, accessories.
Source: www.arstarcompany.ru
How else can you fix PVC panels on the walls?
Although the method described above for decorating walls with plastic panels is not very complicated, it is not suitable for everyone. For example, the walls are perfectly smooth after plastering with beacons or leveling the walls with plasterboard. It is clear that lathing is not needed. It will only take up space. In this case, they violate technology - they glue plastic panels onto silicone or polyurethane foam.
In this case, the starting profiles will still have to be installed, but they will need to be secured to the appropriate dowels. After that, foam (zigzag) or silicone is applied to the back side of the panel (in islands in increments of 10-15 cm), the bar is inserted into the profiles, pressed, and fixed in one or two places with appropriate fasteners. They continue in the same spirit.
The advantage of the method is that it is very fast, the disadvantage is that it only works on smooth (or almost) walls. But the most important thing is that it is simply impossible to remove the finish without destroying the plastic panels.
Source
Soundproof office partitions
Soundproof office partitions, being an aesthetic and practical way of zoning office space, help create comfortable conditions for a quiet business atmosphere, preserve confidential information that is a corporate secret of the company, and ensure maximum work productivity. Products of this type will help cope with noise, which is considered one of the main factors affecting operating efficiency. In addition, harmoniously combined in color and design with the overall style of the room, noise-resistant office partitions successfully diversify the interior of the office.
from 3100 rubles per sq.m.
| Volume, m 2 | Design time (working days) | Production time (working days) | Installation time (working days) | Total (working days) |
| 50 | 3 | 1-3 | 5-6 | 9-12 |
| 100 | 3 | 2-4 | 9-13 | 14-20 |
| 500 | 3 | 4-7 | 15-20 | 20-35 |
| 1000 | 3-4 | 7 | 20-30 | up to 40 |
To ensure a high level of sound insulation, noise-resistant office partitions can be used in offices, conference rooms, meeting rooms, recording studios, customer service areas, and demonstration office spaces.
Height 2.03 - 3.00 m.
Partitions in color: cherry (height up to 2.65) Milanese walnut (height up to 2.65) ash bleached oak wenge white
doors without stained glassdoors with stained glasspartitions without stained glasspartitions with stained glass70333815145745511200 Accordion door of standard size 84x205 cm. Plus each subsequent panel (+14.5 cm.) 1057147716242142 PVC trim 6.5 x 2.20 cm. - 400 rub. Aluminum lock with key (Italy), dark brown — 1,750 rub. Magnetic latch (Italy), dark brown — 650 rub.Soundproof office partitions: design features
Products of this type have a simple design, the base of which is a frame made of metal profiles. The basic materials for models with sound-absorbing characteristics are: laminated chipboard, MDF or gypsum vinyl, but there are also noise-resistant office partitions with frosted or transparent glass or polycarbonate. Panels made from such materials have a thickness of about 10 mm.
When choosing glass soundproofing structures, it is advisable to take into account that glass is a weak noise suppressor, therefore all-glass partitions have a lower level of sound insulation than frame ones. For such options, the possibility of double glazing, the use of additional seals and fittings that prevent the penetration of sound waves are provided.
To further ensure sound insulation, the voids between the sheets are filled with soundproofing material, for example, mineral basalt wool. Recently, preference has increasingly been given to a new sound-absorbing material that has a liquid consistency - isocork. Due to the fact that this material is based on cork, isocork has an excellent level of sound insulation and is highly environmentally friendly.
Noise protection level
Sound insulation performance may vary depending on the type of partition. For modular structures with single glazing, the degree of noise absorption is 36 decibels, for partitions with double glazing - 39 decibels, and for plasterboard - 42-48 decibels. Such indicators are optimal.
Types of mechanisms
Open mechanism
Load: up to 100 kg Wheel material: pom Wheel bearing: nsk Carriage material: AISI 304 stainless steel Carriage coating: galvanized (satin) Under the door thickness: 8-10 mm
Closed mechanism
For doors made of: glass 8-12 mm For doors width: 600-1500 mm Load: up to 80 kg Additionally: suitable for doors in the wall Feature: without glass milling
Synchronous mechanism
Load: up to 80 kg per leaf Installation: only for two doors For door width: from 600 to 1000 mm For door thickness: 8-12 mm Rollers: bearing Upper guide: aluminum Lower guide: none
Hinged mechanism
Load: 80 kg Carriage material: steel Hidden guide material: anodized aluminum Guide length: 1100 mm Under the door thickness: 8 mm Soft closing system: has a closer Features: no threshold - without bottom floor guide Made in Italy
Sliding mechanism
Load: 80 kg Roller material: aluminum Bearing in the roller: reinforced Door suspension: upper Bottom guide: absent Under a door thickness: 8-10 mm For a door width: 600-900 mm Feature: rail and masking strip in one
Telescopic mechanism
Load: up to 80 kg per leaf Installation: 2+0 or 2+1 For door width: from 600 to 1000 mm For door thickness: 8-12 mm Rollers: bearing Upper guide: aluminum Lower guide: none
According to the degree of noise insulation, noise-resistant office partitions can be
- Single-layer (models with single-layer filling are used in rooms with a suspended ceiling, and also as a cheaper option);
- Multilayer (such designs create the maximum level of noise absorption and comfort).
At the customer's request, noise-resistant office partitions can be painted in the chosen color or additionally covered with fabric. Also, if necessary, the thickness of the structure itself or the layer of soundproofing material changes. The tangible advantages of using noise-resistant partitions are ease of installation and speed of installation.
The cost of noise-resistant office structures depends on the dimensions and number of modules, the presence of sliding entrance groups, the complexity of installation and the type of configuration, the type of profiles, the presence of opaque filling and the cost of fittings.
Depending on the characteristics of a particular model, such designs may have a number of additional options: shelves for small items, inclined sections, or a bracket that allows you to attach a monitor.
Source: priorglass.ru
External design of sliding partitions
The type and shape of light walls with sliding sections depends on the personal preferences of the customer and the style of the interior. The design of partitions varies widely:
- Fully transparent are the ideal choice for a small room with one window;
- Toning using film improves the decorative effect of the wall and zoning of space;
- Fully painted partitions blend into the background of load-bearing walls as much as possible;
- Zoned painting obscures only a certain level of visibility;
- Applique application is very popular in shopping centers. Often used for advertising purposes.
Democratic partitions fit perfectly into any interior style.
The impact of sliding partitions on office work
Frame or solid, they do not distract from the work process. Modern competitive conditions call for the use of non-standard solutions to obtain effective solutions. Sliding partitions fully meet modern market trends.
The work of a modern office requires rapid response. Sliding partitions allow you to quickly transform:
- Two small offices into a spacious meeting room;
- Combine brainstorming space;
- Spacious room with several separate offices;
- Work office in a banquet hall or recreation area.
Mobile walls quickly pay for themselves, given the savings on renting additional space.
Office partitions
Zoning and dividing space is one of the main tasks when decorating and arranging any room. Today there are many options - from partitions made of MDF and plasterboard to mobile structures made of plastic and metal. However, they all lose in comparison with glass office partitions, which allow you not only to intelligently divide and zone the space, but also to visually expand it, increasing light transmission. All glass office partitions can be different - it all depends on the manufacturer and individual design features.
What to look for when choosing
It is clear that the choice begins with color and pattern. But to avoid any difficulties during the installation process, you need to keep track of some points when purchasing:
- Inspect the cut of the selected plastic panel. The thicker the lintels and the front and back layers of polymer, the stronger the finish. You can also focus on weight - the greater it is, the thicker the panels will be.
- The thickness of the plastic is the same everywhere, without thickening or thinner places. This is a sign of normal quality.
- Pay attention to the geometry. The cells should not be wrinkled, the edges should be absolutely straight. Even if everything is packed, it doesn’t hurt to unpack and inspect it so that there are no problems later.
- Inspect the front surface. The pattern should be applied evenly, clearly, without blurry spots.
- If you choose panels from different packs, but of the same color, carefully look at the colors - they may differ.
To ensure beautiful wall decoration with plastic panels, check the quality in the store
It is also worth checking the quality of the polymer used. You need to take one plank so that it bends by about 30% and straighten it. After that, examine it. If there is no damage to the plastic or pattern, everything is fine.
Find out prices
You can select the configuration of partitions and calculate the cost on the page
Each of our designs is individual!
- We offer sliding products, fixed and stationary - they not only intelligently zone the space, but also visually expand it, which is important for small rooms;
- this type of partition is equipped with doors with a pipe handle, a pressure element or hinged structures (we guarantee high quality fittings);
- triplex, frosted, patterned, decorative or transparent glass is used - the appearance of the structure and the furnishings of the office depend on it, so it is important to use materials that match the specific interior.
Why choose us?
The InMax company specializes in the design, production and installation of translucent structures in Moscow, so buying office partitions from us means receiving a full range of services - from project development to installation of finished structures. Our experience and high professionalism allow us to solve any problem, regardless of its complexity. But, besides this, you have several more reasons to contact us, namely:
- We produce exclusively high-quality and reliable glass partitions for any premises;
- our pricing policy is loyal and transparent - you will always know what you are paying for;
- We offer comfortable terms of cooperation for both large companies and private clients.
By purchasing glass partitions for offices from InMax, you are choosing the optimal combination of high quality and reasonable cost.
Why should you contact us?
- We have been working since 2012
- We implement projects of any complexity in the shortest possible time
- Kind and attentive approach to any client
- We develop an individual project for each object
- Extensive portfolio
- We carry out urgent projects
Please note that the cost of each project is calculated individually!
For any questions you may have, call us at: +7 (495) 259-09-13
Or leave a request and we will contact you
Source: in-max.ru
Useful information about plastic interior partitions
April 16, 2019
Often, in the process of creating a domestic or office interior, it becomes necessary to divide one large room into several separate zones. And if previously this could only be achieved by building a new wall, today customers have at their disposal such an important tool as interior partitions. They can be made of aluminum, wood, glass, etc. But we consider the most optimal option in all respects to be interior partitions, which are made of polyvinyl chloride (PVC). Plastic guarantees the most acceptable price-quality ratio, as well as those parameters and characteristics that are necessary when solving problems associated with dividing a room into zones by installing interior partitions.
What is a plastic interior partition? This is an organizational interior tool that consists of several fundamental elements. As you review them, you may notice that the structure of a plastic partition is similar to the structure of a plastic window or plastic door. And indeed it is.
Components of a plastic interior partition
- Frame. This element may also be called a module or panel. The frame is made from a PVC profile of a multi-chamber structure, the thickness of which ranges from 52 to 64 centimeters (depending on the purpose of the partition). The plastic profile must be equipped with internal reinforcement, which allows it to maintain its specified shape during operation.
- Glass. In the vast majority of cases, a plastic partition is equipped with glass, which can be either transparent or opaque. Double-glazed windows or triplexes are used as a last resort, since they significantly make the structure heavier. And within an enclosed space there is practically no special need for them.
- Accessories. We are talking about elements that provide fastening (stationary version), movement (sliding version) or locking the interior partition. The latter applies to those models that provide security for the area behind a plastic partition.
Like a plastic window, a PVC interior partition can provide thermal insulation and sound insulation at the required level. But you must determine what level you need at the stage of placing an order, determining the type and design features of the plastic partition.
Main types of plastic interior partitions
- Stationary. We are talking about partitions that, during installation, are rigidly attached to surrounding surfaces, such as walls, floors and ceilings. Stationary partitions are not provided, although they cannot be excluded from being moved again to another location. Individual modules of stationary partitions can be used to create a large structure, rigidly fastened at the joints of plastic elements.
- Mobile. We are talking about modular screens or screens that can be easily moved from place to place if necessary. In their structure they are similar to stationary partitions. Mobile partitions are fixed in a less rigid way, or are not fixed at all.
- Sliding. We are talking about a whole group of partitions, the fitting elements of which are guides and roller mechanisms.
- Traditional sliding partitions are mounted on two guides along which a roller mechanism slides.
- Suspended (threshold-free) partitions have only a top rail, which makes the design much easier to use, although it also makes it more highly specialized.
- Folding partitions have a top rail, plus a bottom if the partition is heavy. The partition canvas can be folded like a book or an accordion, which significantly saves space.
- “Coupe” is a partition in which only part of the canvas moves, with the possibility of “parking” it in the internal space.
- Radial partitions have curved upper and lower guides, as well as a semicircular blade.
Soundproofing of PVC interior partitions
Both a multi-chamber profile and glass sealed with sealing rubber bands are responsible for sound insulation in interior partitions. If there is a need for more serious sound insulation, double glazing can be used. Fixed partitions are considered the most soundproof. Mobile and folding partitions have the poorest sound insulation.
Glass in plastic interior partitions
In most cases, glass with a thickness of 4 to 12 millimeters is used. Clear glasses are rarely used. As a rule, in order to visually isolate an enclosed space, glass is made opaque using matte or decorative coatings. You can decorate glass in interior partitions in different ways. Options are available with drawing, stained glass compositions, relief patterns, tinting, creating a mirror surface, etc. By the way, you can decorate not only glass, but also the profile of the interior partition itself, using the rich possibilities of modern lamination.
Advantages of plastic interior partitions
To conclude, I would like to outline all the advantages that PVC interior partitions have in comparison with partitions made from other materials. Plastic partitions are beautiful, relatively cheap and extremely durable. Their practicality, functionality and versatility allow you to create technical compositions that would be ideal for solving your aesthetic or practical problem. The plastic profile and polished glass are extremely easy to care for. True, given the electrostatics of plastic surfaces, they will still have to regularly wipe off the attracted dust.
Services and service Warranty
- Guarantee
- Payment Methods
- Production time
- Calculator
- Order from A to Z
- Certificates and licenses
- April 30, 2019
Window cost: what factors influence its formation
A modern plastic window is a complex structure. Its final version consists of many components. The more components and the higher their quality, the higher the cost of the finished product. But we should not forget that in order for the window structure to take its intended place, it must be delivered and installed properly with the right of warranty service. Thus, the final cost increases by the cost of delivery, installation and warranty service.
- April 26, 2019
Journey to Juliet's Balcony for True Love
What could be more romantic than the story of the bright and tender love of Romeo and Juliet, which ended so tragically due to the irreconcilable enmity of the two family clans, Montagues and Capulets?
- April 12, 2019
Cooperation of "Window Continent" with famous television programs
Surely there are people among our readers who are looking forward to the release of new programs dedicated to remodeling homes and creating stylish modern interiors. And such names as Ideal Repair, Clean Work, Dacha Answer, Hacienda, Housing Issue are well known to them. We admit that we, too, are long-time fans of programs of this kind. The transformation process taking place before our eyes, which its owners were afraid to even dream about, is fascinating. Particular admiration is evoked by the professionalism, talent and creative approach to the work of the specialists whose efforts are making these wonderful changes. Together with the rest of the audience, we rejoice for those who, thanks to these people, have found not only a new interior, but also received a new life impulse.
- 09 April 2019
Comparative review of OKONTI MIRA and OKONTI BRAVO profile systems
It is unlikely that anyone will argue with the fact that everyone likes comparative reviews. They are interesting, educational, informative, and most importantly, they make it possible to make a choice in favor of a particular product, based not on advertising slogans and promises, but on real facts, advantages, disadvantages and technical characteristics. In general, let’s not drag the cat by the tail for long, but will immediately introduce two participants in our today’s “battle” - the OKONTI MIRA and OKONTI BRAVO profile systems.
All news and publications
| Calculation of your project | or call a surveyor |
Plastic partitions for office
Functional PVC office partitions are the optimal solution for rooms in which a large number of people work at the same time. Plastic structures are easy to install and light weight, which allows you to carry out all the necessary installation work without additional permits. The materials used may have different colors. Prices do not include the cost of delivery and installation of products.
Catalog of office PVC partitions
Combined from RUB 36,000
Combined with blinds from RUB 36,000
Glass from RUB 36,000
Glass with blinds from RUB 36,000
Glass with stripes from RUB 36,000
PVC partitions with sandwich panels 10-24mm from RUB 29,000
Our company presents a wide range of modern solutions for advanced offices. You can choose the most suitable option in terms of price and functionality, based on your basic needs (desired degree of insulation, materials used, etc.).
In the presented catalog you can purchase plastic partitions for office premises of the following types:
- Glazed. The models use durable single-chamber double-glazed windows or glass, the degree of transparency of which is determined individually. We offer completely transparent or frosted glass inserts, as well as additional installation of blinds for independent regulation of the light transmittance of the structure.
- Deaf. To fill the profile structure, opaque sandwich panels in various colors are used. The reinforced frame allows the production of fences of any size, without the risk of subsequent operational deformation.
- Combined. This version of the partition combines the functions of transparent and solid models, due to partial glazing, the use of sandwich panels and inserts of transparent or frosted glass, the use of blinds and various types of draperies.
Profile used
Clamping
The clamping profile fits tightly to the glass and ensures the tightness of the partition. Used to attach the structure to the ceiling or floor. This method of fixation protects the translucent partition from mechanical damage.
U-shaped profile
The U-shaped profile allows you to deepen the placement of the glass, making the partition completely transparent. The edges of the glass are reliably protected from chips and mechanical damage. The profile is fixed to the load-bearing surface using self-tapping screws.
Point mounts
The glass is fixed in the partition using brackets located in special holes and closed with plugs at the top. The edge of the glass sheet is left open but safe by grinding.
