Installing louvered doors with your own hands: how to secure the structure

In order for a person’s health to always be in good shape, ventilation must work in the house. A constant flow of fresh air has a beneficial effect on your physical condition. This can be achieved by keeping all doors open at all times. But this is impractical, since interior partitions serve primarily to separate and isolate rooms. This is where installing louvered doors comes to the rescue. The room will be closed, and fresh air will flow into it.

Features of installing louvered doors with your own hands

Miscellaneous Features of installing louvered doors with your own hands

Constant indoor ventilation is simply necessary for human health and well-being. Convection should be used when cooling and heating the room to create a normal level of humidity. This aspect is so important for humans that modern manufacturers propose installing special nets between separate rooms.

Attention! In the cold season, if the interior doors are open, warm air will spread throughout the room much better and create the same temperature in the house.

But the door is designed to isolate the room. Therefore, it cannot always be open. At this point, ventilation stops. Modern designers have found an excellent solution to this problem - installing louvered doors. This option will be much better than keeping the door installation open all the time.

Louvered doors in the interior

The main positive and negative qualities of this type of design

Louvre design in the dressing room

An installation that is equipped with louvered grilles is in itself a specific thing. She has peculiarities and negative traits. In order to clearly understand whether you should install blinds yourself, first consider the positive aspects:

Good level of air circulation. This parameter is influenced by the space that exists between the individual slats. In addition, the moisture that will enter the room does not remain on the structure and the service life is extended;

Lamels - close-up viewAttaching gratings

Rational distribution of warm air, especially during the heating season;
Simplicity of design. When looking at the installation from the outside, there is no visual overload, due to which the design will look simple and unforced;

Designer construction

Beautiful appearance. The installed type of such doors is simply amazingly suitable for those who have been giving preference to the classic design style for a long time.

Installing louvered doors also has disadvantages. And the most significant of them is that such a design will not be able to fully provide the required level of sound insulation. She simply doesn't exist. Therefore, the scope of their application is narrowing. But the second drawback is the cost. Due to the complexity of their design, such doors become more expensive than conventional door leaves.

Where are louvered doors used?

If you again pay attention to the positive qualities of such structures, you can independently create a list of the places where they are installed. Therefore, consider a list of these premises:

Pantry. This type of door will ensure that there is no “heavy” smell in the room due to its rare use;

Equipped pantry

Wardrobe. Of course, clothes absorb all sorts of odors and moisture. In this case, this will not happen due to the fact that such a design has practically no tightness;

Walk-in closet

Premises for technical purposes. This type of room requires constant ventilation, so installing louvered structures would be advisable.

Technical room

What types of louvered interior doors can there be?

There are two main characteristics by which structures are divided. To get a complete picture, you should consider them in as much detail as possible:

Material used for manufacturing. At this stage, it can be divided into three main types - made of wooden material, metal and plastic. Today, of course, wooden ones remain popular, with metal ones in second place. The first and second options can be painted so that they fit perfectly into the interior. A painted door will be much better and will fit, for example, already installed furniture;
Direct appointment. In this version, the door can be an entrance type, an interior door, or intended for furniture.

Do-it-yourself manufacturing principle

Even if at first it seems that the design is complicated, do not despair, as this opinion is wrong. Louvered doors are not difficult to make yourself.

Attention! The main difficulties arise exclusively in the process of assembling the blinds.

There shouldn't be any difficulties. Let's consider the main points that people pay attention to during the work process:

Canvas frame. Initially, the board for production is selected. Select one of the ends and make grooves in the amount of 5 pieces. Accordingly, there should be the same number of blanks: two along the length of the canvas, and the remaining three along the width. A rectangle is constructed from two short and two long ones, but the third short one is used for a jumper. This bridge is necessary to maintain the shape and structure;
Louvre design;
Assembly process. It begins with the jumper being installed in the box of the prepared canvas. Now you need to carefully insert all the components of the blinds. When they are in place, attach the upper and lower parts of the canvas.

Attention! During the installation process, many people ask the question: which hinges are best to choose for louvered doors? It's simple; hardware stores offer a wide range of additional accessories that are necessary during the installation process. And you can choose it based on the main aspects.

The installation itself will not be difficult and will not bring difficulties if everything is done, referring to the basic rules. You can learn more about this wonderful design from our informational video.

Blinds more than 0 times, average rating Finishing The best way to paint previously installed plastic window sills Protection Methods for attaching vertical blinds with your own hands Protection Blinds for kitchen windows: varieties and choice of materials

Source: https://MezhDveri.ru/11389-ustanovki-zhalyuziynyih-dverey-svoimi-rukami.html

Element sizes

You can see the main dimensions of the elements from which the blind door is made in the figure:

To make the support frame, a wooden beam is taken. The most common option is with dimensions of 2.5 cm x 4 cm, although other options can be considered. The upper and lower parts of the frame can be made from timber of slightly smaller dimensions or the same. The entire tree must be thoroughly dried and treated with special compounds that prevent rotting and the appearance of fungi.

The slats are made from wooden planks with dimensions of 3.8 cm x 0.5 cm. Such plates must be made in strict accordance with the dimensions. To do this, you need to know the technology and use professional-grade carpentry tools.

To determine the door parameters, you need to take the dimensions of the doorway. The door should be 50-60 mm narrower and 70-80 mm lower than the opening. Dimensions are taken in the same way when making cabinet doors, but if necessary, tolerances can be reduced or removed altogether, depending on the method of hanging the doors.

How to install louvered doors in a niche

Miscellaneous Features of installing louvered doors with your own hands

Constant indoor ventilation is simply necessary for human health and well-being.

Convection should be used when cooling and heating the room to create a normal level of humidity.

This aspect is so important for humans that modern manufacturers propose installing special nets between separate rooms.

Attention! In the cold season, if the interior doors are open, warm air will spread throughout the room much better and create the same temperature in the house.

Louvered doors in the interior

DIY cabinet with louvered doors: preparation of materials, assembly

Recently, wardrobes built into niches have been in great demand. But, you can also think about furniture with hinged doors. It is no less aesthetically pleasing and, most importantly, you can make such a cabinet yourself.

Preparing materials and tools to create a cabinet with louvered doors

First you need to measure your niche. For example, let’s take the size: niche width: 120 cm, height: 240 cm.

REFERENCE: a very important parameter is the depth of the wall. If you are planning to organize a closet with a classic rod (when things hang perpendicular to the door), then you need to remember: the depth should not be less than 50 cm (standard hanger size).

Let's say that our depth is only 50 cm. It should be noted that the facade itself will take 5 centimeters, therefore, we will not be able to use the standard rod option. But, there is a Euro hanger on sale - it is located on its side, and things are placed with the front side facing the doors.

Advice from professionals

Here's what professional shutter door manufacturers recommend for maintenance:

If the lamella is cracked or deformed, it will need to be replaced by carefully disassembling the structure.
Scratches on the surface of the door can be filled with furniture wax or putty of a suitable color.

We also offer several videos so that you can see with your own eyes the various aspects of making blind doors:

As you can see, making a louvered door yourself is not very easy. But this task can be overcome with careful adherence to technology. And then the finished door will decorate the interior of your home.

Wooden louvered doors for wardrobes, bathrooms and toilets, kitchens

All photos from the article

Louvre doors have been used by furniture makers, builders and other specialists in one way or another connected with interior design and building equipment for centuries. They are periodically forgotten, then again, having remembered, they are actively used in the most expanded range of areas. In our article we will describe possible options for using such products.

Doors with horizontal rivers improve ventilation of living spaces

Possible options for the location of wooden shutter doors

Standard wooden shutter doors for cabinets are installed on cabinet furniture as facades. Below you will learn how to apply them directly in this way and “outside the box.”

Bedrooms and living rooms

As you know, the best storage for clothes, linen and other things are wardrobes and chests of drawers.

So, a louvered cabinet facade has several advantages over solid doors:

Possibility of ventilation (things can “breathe”), which significantly improves the quality of storage.
As a result of good ventilation, moths will not appear in the closet.

For your information! The moth does not like dry and fresh air; its best habitat and breeding habitat is humid, warm nooks with a stagnant climate.

Two types of furniture are used for the wardrobe:

“Ventilated” furniture allows you to avoid the appearance of unpleasant odors on clothes

Regardless of the design features of the clothing and linen storage, louvered doors can be used, installed in various ways:

Using furniture hinges for wooden door frames, the leaves of which open and close in the usual way.
With a set of guides for wardrobes with sliding doors.

Wardrobe rooms

Now it has become fashionable and, I must say, affordable for large apartments to arrange entire dressing rooms. So, on the line between the space of the dressing room and other rooms (usually the bedroom), it is customary to install louvered doors. For dressing rooms, in addition to the two methods of fastening doors described above, the “accordion” option is possible.

These doors fit especially well in wooden rooms, where they blend with the interior

It is possible that wooden shutter doors can be installed inside a room – a wardrobe, or on separate parts of a “storage room”.

Bathrooms and toilet rooms

Doors with slats look very impressive in bathrooms and toilets.

In these rooms, blind doors are used:

In the photo - all unsightly communications under the washbasin are hidden in this way.

Bathroom screens.
Panels for decorating niches with pipes, shut-off valves and metering devices.
Screen for water heating system.

Attention! For covering water supply and wastewater pipelines, as well as for the boiler piping system, ventilated structures with blinds are a priority.

The instructions recommend their use, as this will help avoid condensation on communications.

Kitchens

Following the same principle as in bedrooms, louvered facades are installed on kitchen units, usually made of natural wood. Cabinets for storing groceries, just like clothes, need constant access to fresh air to prevent the appearance of cereal bugs and moths.

In addition, it is worth noting that regardless of the installation location, louvered doors make the interior of the furniture and room extremely attractive and unique.

Design of openings

Separately, we should talk about the equally frequent use of such doors in the design of windows, balconies, and doors. This style “a la Provence” is in great demand today not only among the French.

Louvered wooden painted doors are installed as shutters both indoors and outdoors. In any case, they are not only a decorative element that makes the appearance of the openings from the outside completely complete and quite elegant.

Covered up on a hot summer day they:

They will protect from the heat without interfering with the free circulation of air.
They will not provide complete blackout like blind shutters.

Other Applications

The use of louvered doors does not end there.

You can make wonderful decorative elements from them:

False shutters for openings and street buildings.

Louvered doors can be installed as both entrance and interior doors

Screens - for dividing space, for small partitions separating, for example, a bedroom from a ladies' corner.
Ventilation grilles for heating devices.

With the help of blind products, huge radiators will no longer confuse you and your guests

Purchase or self-production

Recently, simple door designs - blinds made of pine - have been sold in domestic stores. Their price is quite affordable, and, what’s even more pleasing, there are a variety of sizes of wooden louvered doors.

Here are some of them:

Width options - 294, 394, 494, 594 mm for all door heights shown below.
Heights – 606, 720, 993, 1100, 1700, 2013, 2422 mm.

As you can see, the range of dimensions is presented in abundance; anyone can choose the appropriate option for themselves and do the finishing and hanging on site with their own hands.

You can also purchase more expensive louvered doors made of valuable wood, painted at your discretion.

Without a doubt, there are woodworkers who can make similar cabinet doors to individual sizes on their own. (See also the article Wooden stools: features.)

Conclusion

The use of the above-mentioned products is not limited to generally accepted standards; in this case, only two things serve as the framework: financial capabilities and your ideas. To come up with something unusual, look at non-standard solutions using blind doors on the Internet.

Manufacturing material

Louvre doors can be made from various materials.

plastic;
metal;
wooden;
MDF products.

So, for example, wooden products are made from well-dried wood (usually pine is used for this, less often alder, beech and oak), which is divided into separate layers and glued into dies. This technology of wood fusion makes it possible to obtain a unique product: this structure is resistant to adverse external influences, moisture and temperature changes, and therefore can be installed even in rooms with high levels of humidity.

Metal and plastic louvered doors look very stylish and beautiful, so they play a special role in the interior. As a rule, metal and plastic products are either purchased ready-made or made to order. But wooden louvered doors and MDF structures can be made with your own hands if desired.

Wooden louvered doors: design, components, installation and operation features

Louvre doors are often made of plastic, but wooden models are more environmentally friendly and beautiful. Before choosing ready-made designs or creating a door with your own hands, you need to familiarize yourself with the features of blinds.

The design of louvered doors involves the presence of a frame, inside of which thin strips - horizontal lamellas - are fixed at an angle. There are gaps between these elements, which ensure ventilation of the room. The door lock, handle, and hinges are located on the frame, which must have sufficient width and thickness to accommodate such parts.

The design of louvered doors is simple, but most often they are installed for cabinets or partitions

Louvered doors are most in demand as cabinet fronts or light partitions. Installing such a structure instead of a regular door in a living room will not provide sound insulation, and foreign odors will penetrate into the room. In any case, the canvas can be of the following types:

swing structures - have doors that open in one direction and are secured with hinged hinges;
sliding - designed on the principle of compartment doors, that is, they move along special guides along the walls;
Accordion doors are a folding type of structure and consist of several elements.

Hinged louvered doors can be double-leaf

Practical are louvered doors that have paneled inserts at the bottom of the leaf. In this case, the canvas consists of a blind lower part and an upper area with lamellas. Various combinations are possible, but the door always has a strong frame-frame to which the slats are attached.

Photo gallery: options for wooden louvred doors

Louvered doors allow you to effectively separate the dressing room from the main room Doors with slats are appropriate for both utility rooms and closets, as well as living rooms Louvered facades provide ventilation for closets Louvered shutters and doors can easily be combined with each other Louvered shutters often complement doors in a house located in a hot climate climate A double folding louvered door is an original and convenient solution. Balcony louvered doors will be appropriate in countries with warm climates. Louvered doors can not only be hinged, but also have a sliding design

Manufacturing of louvered doors

To create louvered doors, you will need skills in working with carpentry tools, as well as knowledge of manufacturing technology. The dimensions of the future structure are preliminarily determined.

If the doors will serve as interior doors, then their height should be less than the height of the opening by about 7–8 cm, and their width by 5–6 cm.

In the case when the blinds are made for a built-in wardrobe or dressing room, you also need to measure the opening and determine the dimensions of the doors, taking into account the frame.

Blind structures are made taking into account the characteristics of the installation site

Doors with a lower paneled insert and decorated with lamellas on top can be used as interior doors.

In this case, the design assumes the presence of two long vertical posts, three crossbars (upper, middle and lower), panels and louver slats.

The size of the elements is determined individually, but the width of the frame bars must be at least 40 mm, and the thickness must be at least 25 mm. The length of the panels should be approximately 8 mm greater than the distance between the vertical posts of the frame, and the thickness should be from 4 mm.

The slats are inserted into grooves previously created in the frame racks

During the work you will need the following materials and tools:

high-quality wood without knots and with a moisture content of no more than 12%;
PVA glue, dowels, varnish or paint for decorating the product;
screws, screwdriver, hammer and mallet, sander with medium and fine-grain sandpaper;
building level, plumb line, tape measure, ruler and pencil;
milling cutter, thickness planer.

The wider the lamellas, the less their number in the structure

Making lamellas requires carpentry equipment. Therefore, if a need arises for one door, it is most cost-effective to purchase a ready-made model or order a design from the manufacturer.

Manufacturing stages

Before manufacturing, you need to cut the bars for the frame according to the dimensions indicated in the diagram. Next steps are as follows:

The panels are sawed using a thickness planer and the corners are removed using a router.
Grooves are cut out in the side vertical bars of the racks with a milling cutter, carefully marking the location of each groove and its angle of inclination.
All parts are processed with a grinder, using first medium-grain sandpaper, and then fine-grain paper.
Painting is carried out for each element separately, and after the coating has dried, you can continue working.
For assembly, grooves are created along the edge of one of the vertical posts and dowels are inserted into them.
The slats are installed in inclined grooves, and the horizontal cross members of the frame are fixed to dowels after installing all the slats.
The second vertical post is mounted on an almost finished structure; there are also dowels along the edges of this post.
For more reliable fastening of the frame, you can lubricate the dowels with PVA glue, and fix the assembled door between the clamps.

The slats are inserted into the grooves and fixed with PVA glue

Painting can be done with a brush or spray gun. In any case, all hard-to-reach areas of the structure (if an already assembled door is being painted) must be carefully treated. Before painting, experts recommend applying an antiseptic to the wooden elements, which will prevent the material from rotting.

How to install doors

The installation method for louvered doors is determined depending on where they need to be installed. For example, cabinet doors are simply fixed to the walls with hinges, maintaining evenness. If the canvas is mounted as an interior door, then you must first assemble the frame and secure the hinges on the vertical post of the door and frame. The following events are carried out:

The box is installed in a flat opening, secured with wedges that are secured between the wall and the box posts. By adjusting the wedges, the structure is leveled, and then the cracks are sealed with foam. After this composition has dried, the wedges are removed.
The canvas is hung on hinges and the levelness is checked using a building level. If necessary, the hinge screws are tightened or loosened.
Holes for a lock or handle are made in the canvas in advance, and after hanging, the mechanisms are installed.
Check the quality of installation. If the door touches the frame when closing, you need to adjust it by fixing the screws.

Installation of a louvered door is carried out in the same way as an interior door

At any stage of installation, it is important to control the evenness of fixation of each element. This way you can prevent the box canvas from touching the floor and causing abrasions.

Repair and restoration of wooden doors

Louvered wooden doors have a lower level of strength than other options. Therefore, even minor faults should be corrected in a timely manner, which will prevent more serious breakdowns. In the most common options, the following actions are taken:

Deformation of planks and cracks in wood. Such damage to the slats requires their replacement. If they are not fixed with glue during manufacture, then the structure can be disassembled and the elements replaced. Otherwise, the door is completely replaced, since the panels held together with glue cannot be carefully removed.
Broken lock or handle. If the lock or handle is broken, you need to carefully remove the old mechanisms and install new ones in their place, which have the same dimensions.
Cracking of varnish or paint. If the paint is cracked, you will need to disassemble the structure, remove the old paint and apply a new coating.
Formation of scratches. Small scratches on easily accessible surfaces of the door are repaired with furniture wax or wood-colored putty.
Updated appearance. An unpainted but assembled door can be coated with a colored compound using a spray gun, but it is important to carefully treat all hard-to-reach places.

If the lamellas are located freely, then painting is possible already assembled

Repair and restoration of canvases with lamellas require care, because such structures are not solid and consist of thin slats. Therefore, when removing a door, for example, to repair and replace hinges, everything must be done carefully.

How to care for louvered doors

Regular care of such doors involves removing dust with a damp cloth, treating them with furniture polishes and other products for wood products. And you also need to carry out an inspection about once a month to identify faults and eliminate them in a timely manner. It should be noted that louvered models are not resistant to strong impacts, loads and mechanical influences. Therefore, they often serve as lightweight partitions.

Step-by-step instruction

A 50 x 50 mm beam is sawn into two lengths equal to the height of the door.
Then the timber is passed through a surface planer and cleaned with a grinder.
The jig is attached to the racks one by one, and the grooves in the future door racks are cut with a hand milling cutter.
They make slats or take ready-made planks 30 mm wide and a thickness equal to the width of the groove (8 mm).
The longitudinal edges of the slats are rounded with a grinder.
The transverse elements of the door leaf trim are made from the same timber 50 x 50 mm. The length of each of them is equal to the distance between the frame posts plus two dowel lengths. Rounded dowels are formed at their ends using a router and saw.
At the bottom and top of the racks, grooves are cut with a router for the dowels of the horizontal trim beam.
The slats and cross beams are inserted into the grooves of the racks, and the dowels are lubricated with wood glue.
The entire structure is tightened with clamps or belts.
After a day, the ties are removed.
At the outer ends of the racks, grooves for the hinges are cut out using a chisel. If moving panels are installed, then the components of the sliding system are attached to the door frame. In the case of forming fences in the form of shutters, rollers and guide tracks are installed.
All wood is coated with drying oil and then painted. Otherwise, the wood is impregnated with stain and coated with furniture varnish.

In this example, the blind slats are positioned at an angle of 45 degrees. This is not dogma. The inclination of the slats can be different, up to 15 vertically.

Louvered wooden doors for cabinets: installation features, advantages and disadvantages

An important element of the interior of a country house, city apartment or office is the closet. Built-in or free-standing, made of one material or another, it can have a different design. But such items have one common detail - doors.

For example, you can use folding wooden doors for a closet. This type of doors occupies a special place among the variety of different pieces of furniture. Such designs have a lot of advantages, which, in fact, explains their ever-growing popularity.

It is worth noting the widespread use of shutter doors, which are often used as:

Facades of bedside tables, cabinets and kitchen furniture;
Interior system;
An additional part of a window or door structure.

The basis of the design of the door shutter system is a strong frame in which transverse strips are fixed at a certain angle.

When choosing these products, you should pay attention to the lifting mechanism - it must meet a high level of reliability and quality. If the device is of dubious quality, then the movements will not be smooth, which after some time will lead to deformation of the product.

The materials used to make door shutter installations are: plastic, metal, wood, bamboo, fabric . Wooden door systems are most often used for bedside tables and cabinets.

After all, this material is convenient for implementing all kinds of designs. For example, if you plan to install wooden folding doors in a closet, then they are coated with transparent paint with a glossy sheen or varnish.

It is this kind of decor that can favorably emphasize the texture and color of the wood of the structure.

To give the wood the effect of a valuable type of wood, it is covered with stain . Some home craftsmen choose paint in rich colors, with the help of which the blinds turn into a bright interior detail.

Advantages and disadvantages

Folding shutter doors to the closet have the following positive characteristics:

The design of blinds allows for more efficient use of small free space, especially for balconies, loggias or other narrow spaces.
Installing blinds does not require special training, so even a novice master can handle it.
The design of wooden folding blinds provides small gaps between the slats, which allow the contents of the cabinet to be ventilated. Thanks to this door system, there are no conditions for moisture accumulation. Natural ventilation preserves things and protects against moths.
The wardrobe with folding wooden louvered doors has a beautiful and neat appearance. The variety of color palettes makes it easy to choose the option that suits your interior.
In addition, louvered doors are characterized by long-term operation, provided they are used carefully.

However, such products also have another side, which is not without its drawbacks:

Louvered wooden doors allow odors and light to pass through, which in some cases is not desirable.
It is not easy to paint the sash, since this first requires disassembling the blinds. Then each plank needs to be processed, which takes a lot of time.
Louver door systems are not cheap.

Plus, the room where the cabinet with doors made of blinds is installed needs control of air humidity . Thin wooden planks of the canvas are very sensitive, therefore, when it increases, they can become deformed.

Temperature fluctuations can also negatively affect the door mechanism. If temperature fluctuations are regular, this will be reflected in the coating: the varnish or paint will begin to lose its properties and deteriorate, as a result of which the wooden structure will lose protection and will quickly become unusable under the influence of moisture.

Application

Quite often, louvered doors are used in the manufacture of furniture. Such doors serve as an excellent barrier that prevents moths and other insect pests from appearing in cabinets, which prefer dark “zones” with high temperatures and “stagnant” air.

In addition, structures with louvered grilles can be used to hide ventilation systems, heating and plumbing pipes. Also, such doors can be installed at the entrance to a balcony or veranda, or used as an interior door system.

What are the requirements for automatic sliding doors?

Automatic sliding doors ideally meet the requirements for structures of this type. They allow large groups of people to freely enter and leave the premises, prudently opening when they approach. The doors do not close immediately, but some time after the person leaves the opening - this is convenient for mothers with strollers or small children, as well as when moving luggage in a suitcase or trolley on wheels.

Owners of private households mainly use automatic sliding doors on the street: at the entrance to the territory, to the garage or to the site. Self-opening gates are valued by homeowners and car enthusiasts, because they allow you to enter/exit the property without getting out of your car or fiddling with locks.

Characteristics of blinds and their varieties

It is immediately worth noting that blinds are not full-fledged doors, that is, they cannot fully replace them.
This is a type of partition. If you still want to use them as a door with all the functions, then you can combine them with a regular leaf, preferably glass. Now blind structures are offered in various configurations, among which the following stand out:

Vertical, which are a classic version of the office type. The slats are located vertically; they can be moved to the side using a special mechanism.
Horizontal is the same familiar design, which has been popular for use on windows for a long time. If the slats are made of metal, then such blinds completely replace the door leaf.

Interior doors with the effect of blinds stand out especially. They represent a frame, inside of which horizontally located lamellas are installed. They look very advantageous and refresh the design. They fit especially harmoniously if the room has cabinets with doors of the same design. Such models are made from various materials, including polymers, wood, metal and others.

Types: wooden, plastic, metal

A shutter door is a durable frame into which thin slats are inserted. The slats are inserted into the frame at an angle to block the path of light, so the louvered door is impenetrable to prying eyes. But the gap between the slats allows air to pass through the canvas.

Since the lamellas are very thin, they are not able to provide high structural strength. The role of the load-bearing element in a louvered door is played by the frame. A handle, hinges and other fittings are attached to it. If necessary, you can even embed a lock into the frame, but a louvered door, for obvious reasons, cannot be a reliable barrier.

A number of materials are used to make doors of this type:

Tree. Wooden slats look the most luxurious. This door will serve as a decoration for various interiors. The main disadvantage is the high cost, although the price of a louvered door will be somewhat less than that of the same door made of solid wood. This material is also afraid of high humidity, because... wood tends to warp and swell from water.
Aluminum alloys. This is the most durable material used in the construction of louvered doors. The strength and durability of the material allows the use of such doors in technical rooms, storage areas, etc. In addition, aluminum is not afraid of moisture. Disadvantages: high price and relatively heavy weight of the structure.
Polymer profile. This is the most budget option, which is inferior in strength to aluminum, and in aesthetics - to wood. The main advantage of plastic shutter doors is their affordable price for a wide range of people.

When designing doors, blinds can be combined with other elements. For example, doors look good if the two lower quarters are made of solid wooden panels, and the two upper segments are filled with slats.

The design solutions also differ. Blind doors can be hinged (with one or two leaves), sliding or folding like an accordion. Such a variety of design options allows you to fit louvered doors into almost any interior.

Read the series of articles about doors: How to install an accordion doorInterior doorsHow to make sliding doors with your own handsInstalling plastic doorsInstalling entrance doors instructionsDo-it-yourself soundproofing of doorsDo-it-yourself plywood doors