Tools for installing interior doors: electric, manual, consumables

As a rule, doors are installed at the stage when the interior finishing has already been done: the floor has been poured, wallpaper has been hung and the ceiling has been painted. This helps to avoid premature wear and damage to interior doors.

The tools should ensure that you can perform all operations related to installing the door. Therefore, we will consider the tools used in the context of basic operations.

Installation features

Dismantling the old one and installing a new one is accompanied by the formation of a large amount of dust and debris.
To deal with them, you need to prepare cleaning equipment: buckets, a broom or brush, rags, a mop and a vacuum cleaner. The process of installing interior structures includes stages of work at which various tools will be needed. The main stages are:

• Dismantling old interior doors. If the box remains old, the sash and trim are removed. The old frame is cut out if necessary.
• Box installation. The box is adjusted to the opening (or vice versa), assembled and fixed in it. Gaps are eliminated with foam and putty.
• Decorating the opening. The protruding areas of the foam are cut off, and the plaster is cleaned with sandpaper. Slopes are formed and finished. Platbands are installed.
• Interior doors are being installed. Hinges and locks are jammed. The canvas is hung on the frame. Handles, linings are attached and other fittings are installed.

Everything necessary for installing interior doors can be divided into three groups: materials, electric and manual tools.

Principles of tool selection

An important stage in the selection of tools for door installation will be the preparatory stage. Necessary:

• Determine the scope of work;
• What tools may be needed during the work process;
• Check whether you have what you need at home and whether it is in working order;
• Write a list of missing tools. This will reduce your work time in the future, because you won’t have to go to the store every time for more and more purchases. In addition, with preliminary preparation, you can select equipment more carefully. This way, only the best options for appliances and fixtures will be in your home.

The choice of equipment used is also important for high-quality installation and further operation of the interior door.

Consumables

The speed and quality of installation of interior doors depends on the quality of the consumables used. Materials are prepared in advance. It is better to purchase in specialized stores. For installation you will need the following:

• Fasteners You need to purchase nails without heads, dowels and self-tapping screws.

They will be required for the installation of the frame, hinges, extensions and trim. There should be a large supply of all kinds of fasteners, so they are purchased in boxes.

• Polyurethane foam. It will be needed to blow in the cracks between the box and the wall. In addition, the foam will increase sound and heat insulation, as well as the adhesion of the box to the wall, therefore, its quality must be guaranteed to be high.
• Putty. The mixture will be needed for sealing and grouting seams and irregularities.

You need to purchase from trusted suppliers, since the durability of the protective layer on foamed areas depends on its quality.

• Serpyanka. If the cracks are too wide, you cannot do without it. It is often necessary to plaster surfaces with complex terrain. In such cases, serpyanka allows you to achieve the necessary strength.
• Metal corner. Used when you need to create even angles on slopes.
• Drywall. Will be needed to design slope planes.
• Wooden wedges. To fix the frame in the opening, you need to have a dozen and a half small wedges. They are made from any wooden slats.
• Spacers. To keep the frame in the correct position until the foam dries completely, spacers must be placed inside.
• Liquid Nails. Fastening of platbands and slopes is often done using glue.

But that is not all. To design the opening you will need:

• Container for solution.
• Master OK.
• Several brushes and rollers of different sizes.
• Tools for grouting.

Buy fasteners for hidden installation of door frames

How to select and install a door installation kit

To install a swing interior door, you will need quite a lot of materials and tools. Moreover, depending on the condition of the opening, the nature of the wall, the weight of the sash, and so on, different fasteners and tools may be needed.

Fastening The installation kit for installing interior doors is a universal set, since it not only includes the parts necessary for installation, but also determines a certain technology.

The complete set of a door, as a rule, means fasteners, fittings - a lock, handles, some additional elements - trim, racks, etc.

DoorKrep - professional fasteners for installing interior doors

DoorKrep fasteners are specially designed for high-quality installation of interior doors.

DoorKrep fasteners are hidden. To install the fasteners, you do not need to drill through the door frame! Installers will fasten the door frame at five or six points to ensure a secure fit, but after foaming the door frame and installing the trim, no traces of fastening will be visible. Unreliable fastening of the interior door during installation often becomes the reason that the doors begin to close poorly after a while.

Read more about reliable fastening of interior doors in the section Why reliable fastening of the door frame is important

Installation kit for prof. door installation

Russian patented technology for quick and high-quality installation of interior doors. Advantages of installation with this kit: 1.

The installation kit allows you to perfectly align all the gaps even after hanging the door leaf! How? Just! You have a door, but the guide screws can be screwed in and out of the doorway using a key.

What no golden hands that install doors in any other way can do!4. Significant savings on installing doors yourself.

Using brackets, you can install an interior door yourself and save from 5 to 15 thousand for the entire apartment.

Installation of the box according to GOST: fastening at 6 points for plugs (VIDEO)

There are at least 4 ways to attach a door frame to an opening.

1. Before sawing the joints of the frame at 45 degrees, you need to take measurements of the door leaf.

We measure the door leaf in width and height on each side.

This is important because the door leaf often differs from the stated dimensions by a couple of millimeters.

We make the horizontal bar of the box wider by 6 mm, and the vertical bar by 13 mm.

REPUBLIC OF BELARUS, Minsk, st. Annaeva, 84/7, room.

4-14 9.00 - 18.00 Mon-Sat, closed Sun RUS , / / ​​Why do we need construction fasteners?

The installation of no structure can be completed without the use of this element. The durability and reliability of the entire structure depends on the quality of the fasteners used.

Here you will find a wide selection of hardware products for any job - from hidden installation

Installation kit for quick door installation

To quickly and conveniently install interior doors, you can use a special installation kit, which will greatly facilitate the installation process.

Both experienced craftsmen, and especially beginners, claim that using a kit it is much more convenient and easier to install doors. In this article we will look at the features of the installation kit and find out what is included in it. We will also find out at what price you can purchase this useful auxiliary device from different manufacturers.

1. 1 Description
   1.1 Pros
2. 2 What's included in the package
3. 3 Manufacturers and prices
4. 1.1 Pros

Pitfalls of popular hidden door installation

The fastening of the door frame to the wall is done in such a way that this fastening is not visible on the visible parts of the door. ready-made boxes. There are several options for hidden installation, as well as special fastenings for it. But the options are labor-intensive, and special.

fastenings are expensive. But the popularity of hidden editing encourages the natural Russian mind to solve this problem in a simple, but not reliable way. And the desire of customers to get results that are beautiful and good, but at the same time cheap, only contributes to the promotion of this phenomenon. What is this hidden installation, which was invented in this situation and is widely practiced here in Russia?

The door frame is secured with three screws.

Two under the hinges on one side, and one screw in the lock strike plate on the other side. The upper part of the box is bursting with wooden wedges (vertically and horizontally).

Space between doors the box and opening are filled with polyurethane foam.

Advantages of kits for installing interior doors

Sections of the article: A kit for quick installation of interior doors significantly expands the possibilities for installation. Modern technology for performing such work has a number of features and advantages. Installation using door components is different from all traditional installation methods.

It should be noted that the proposed kit includes not just a set of fastening elements. It is a complete and proven technology.

Each kit comes with a detailed step-by-step manual. This makes it possible for anyone to install an interior door unit with their own hands. We can say that the kit is a kind of construction set.

This approach to installing interior doors transforms installation from routine work into a creative process. In addition, using a kit for installing interior doors can significantly save money. This product includes two parts.

Power tools

To install interior structures, the following set of electrical tools is used:

• Hammer.

Installation of interior doors without this device is unthinkable. It is used to make holes for attaching the block to the wall. The number of fasteners may vary depending on the weight of the structure and the characteristics of the opening.

• Drill. Used for drilling holes for fastening with self-tapping screws. The device must have a good chuck that ensures high reliability of drill fixation.

A drill that comes out at the wrong time can damage the structure or harm the health of the craftsman.

• Screwdriver. Driving in self-tapping screws and screws without a screwdriver requires a lot of time and effort. In addition, a high-quality tool allows you to drill holes without using a drill.
• Jigsaw. The tool will be needed for cutting platbands.
• Bulgarian. If the walls are too crooked, they and the platbands will need to be leveled. A grinder is used for this.
• Fraser. The tool is used for inserting hinges, locks, handles and eyes.
• Electric planer. To easily and quickly adjust platbands and extensions, you need to have such a tool on hand.
• Miter saw. The tool is used for cutting box bars and trim at an angle. You need to have it, but the thing is expensive and is rarely used at home.

Why is it worth installing a hidden door?

Hidden-mounted interior doors are almost invisible in the room. This allows you to decorate the interior in an original way. The room is visually enlarged. Many people decide to install such a door structure due to the following advantages:

• Possibility to hide a technical room (for example, a storage room).
• Wide range of wall finishing options.
• You can decorate the door frame and panel at your discretion.

These doors are ideal for rooms decorated in the popular minimalist style. Available ready-made. But manufacturers can make a hidden door to order, taking into account non-standard opening dimensions.

Hand tool

Marking, adjustment, installation and fastening of interior doors must be done by preparing the following tools:

• Marker or pencil. The latter must be chosen so that it will not scratch the surface. The elements are cut from the front side and if pencil grooves remain on it, the design will lose its appearance.
• Roulette. To take the necessary measurements, you need to use a tape measure with a minimum length of 3 meters to reduce the likelihood of errors.
• Calipers. To determine the depth of the lock and make markings for fittings, you need to have a tool with a depth gauge.
• Set of chisels. The insertion of hinges and linings is done with chisels of different widths.
• Building level. A bubble-type instrument must have a length of at least 50 cm.
• Plumb. The installation of the box in a vertical plane must be done with level control.
• Ruler. You need to use steel.
• Metal square. You need to check the correctness of the catch exclusively with the help of it, and not by eye.
• Miter box.
• Mallet, hammer.
• Screwdriver Set.
• Saw.
• Crowbar (mount). Definitely required when removing the old box.
• Foam gun.

It’s clear what tools you need to prepare to install interior structures. The question is its quality. It's best to work with a professional. At worst, it must be of high quality workmanship. It is, of course, expensive, but the pleasure of working with it is worth more than money. Everything will be done promptly and quickly, and the end result will always be higher.

As a rule, such a tool is not purchased directly during repairs. Every man in the household should have it long before you decide to change or install interior doors. But if you decide to buy it just now, why not? All the same, this will need to be done sooner or later.

​Top rating templates for inserting hinges and locks into interior doors

Door hinge installers need to have a set of good construction equipment. Along with the usual set, they use a template for inserting hinges and locks. A milling device is needed when installing door hardware.

Why do you need a template for a router?

To buy a template for inserting hinges and locks, you need to study their types and operating features. In fact, there are only two types of them.

1. Most models of templates for a router are made in the form of a base and a variety of inserts for each type and size of fittings. They are very inconvenient to use, since you will always have to buy new inserts and carry a large bag with these inserts.
2. But there are also more modern and universal tools for inserting fittings into interior doors. On such devices for installing fittings, all sizes are quickly adjusted on the machine itself for inserting hinges and locks.

Below we describe in detail the pros and cons of each tool for installing hinges and locks. Based on the professional opinion of installers of interior doors, we will draw the right conclusions and reveal the whole truth about templates for inserting locks and hinges.

What template do professional craftsmen choose for inserting hinges and locks?

Qualified installers meticulously select the right tools from the variety offered. They know that the slightest mistake will ruin expensive doors and they will have to pay for them.

Carriage for the UVK-Profi router.

The market leader among templates for inserting hinges and locks. Surpasses similar construction equipment in cost, service life, convenience and functionality. Produced by the domestic company Master Profi, which produces professional and amateur tools for inserting fittings into interior doors. They know what is needed for precision when installing fittings.

Material used in the production of ufk-porfi: processed duralumin, structural textolite, polyacetal, capralon, hardened 16 mm stainless steel shafts are used to move the matrix, the vice is made of 8 mm steel shafts. using trapezoidal thread.

Linear bearings are enlarged, closed type, made in Germany. Plastics and other fragile materials are not used in the tool for installing hinges and ufk-pro locks.

This tool is capable of installing any fittings, even those that have just appeared on the market. The work with it is so precise that it seems as if the fittings were installed at the factory.

• From standard locks to hidden hinges of any complexity, UVK-Profi copes with the task perfectly.
• A universal and adjustable device for a router, it cuts any hinges (hidden ones too) into the door leaf and frame simultaneously.
• Suitable for mounting all types of lockable mechanisms without the use of other tools.

Advantages of the ufk profi fitting template:

1. The only existing tool that has a complete absence of errors when installing fittings. Perfectly accurate factory insert;
2. Works without auxiliary kits, tools or inserts. One compact device will install absolutely any fittings in interior doors;
3. Ease of use. No special skills or education are required for the job; simple adjustment to the hinge or lock that needs to be installed takes no more than 1 minute;
4. Works with all types of routers;
5. Installation of all types of hinges is carried out simultaneously in the door leaf and frame;
6. Will embed bolts of all sizes and hidden hinges;
7. Installation of locks can be done on doors already installed in the opening;
8. The router template is securely attached using the built-in vice;
9. For instant positioning of the carriage relative to the edge of the canvas or box, special markings are provided;
10. Compact and convenient tool (weight 3.2 kg).

Built-in template vise, designed with two independent elements, support and clamping vise are adjustable independently of each other. This makes it possible:

• Even faster and more accurate sizing adjustments. After working with the carriage a couple of times, you will know exactly how to set the vice (based on the width of the box or blade) to instantly embed any fittings without adjustment;
• Quickly shift the center of the cut;
• Increase the working width. Used for new wide boxes (150-200 mm) and simultaneous insertion of hinges.

The UVK-Profi universal carriage for inserting hinges is worth buying because it is recommended by all experienced specialists. They always use the best tools in their work.

Numerous positive reviews indicate that the UVK-Profi tool for installing locks and hinges has established itself as the best universal template, which has no analogues in the quality of insertion, ease of use and reliability. Customers note that door hardware is installed in a matter of minutes.

Compared to similar tools, the UVK-Profi carriage is much cheaper, but it is lighter, more functional and more convenient to use.

Website of the official manufacturer where you can buy a template for inserting hinges and locks: https://master-profy.ru/ Address: M.O. Balashikha microdistrict Kuchino st. South house 9. Opening hours: Weekdays from 10:00 to 20:00, weekends from 12:00 to 18:00.

Video review and instructions for working with the tool. Information taken from the official source of the manufacturer:

Virutex hinge template

One of the analogues with a factory insert. Unfortunately, it has a number of negative aspects:

• Only a branded router is used in the work. If any part breaks, buying another model will cost less;
• It takes a long time and is difficult to adjust the desired size;
• For each type of service - inserting hinges, locks and hidden hinges - a separate tool is required. The estimated cost of three devices exceeds 160,000 rubles;
• When inserting hinges, it is not possible to embed them simultaneously into the box and the canvas;
• The bolt does not cut in at all;
• The specialist will be forced to transport two instruments with a total weight of 15 kg, which is very heavy.

In general, there are positive reviews. The result is a high-quality and even insert.

Template for inserting Gidmaster locks

Compared to the previous model, this jig for inserting locks is a fairly cheap option (around 12,000 rubles). But it is far from universal and is only useful when working with locks. Yes, and the insertion is only possible with a drill.

Before purchasing this model, it is important to consider that:

• There will be inaccuracies in sizing adjustments;
• The drill works worse than the router; its speed is too low. Torn edges form in the form of unevenness and chips on enamel doors;
• Only cutters with threaded collets are suitable. There are no such cutters on the market; you will have to order thread cutting from a turner each time.
• This jig is not intended for installing hinges, bolts and strikers.

Templates for a router with inserts and copy sleeves

Templates for inserting hinges and locks with replaceable inserts are more suitable for amateur use. But the work will take a lot of time, because there are many configurations and sizes.

In this case, you will have to spend much more money than planned. Purchasing a minimum set that is suitable only for 5 types of hinges, locks, hidden hinges, latches and strike plates will cost 15,000 rubles. For a standard set in which you can embed 30% of the existing fittings, you will have to pay at least 25,000 rubles.

Today, the complete package of inserts includes over 200 pieces. The cost of each insert is 300-500 rubles. not counting the price of the base itself for inserts and copying sleeves, all this pleasure is estimated at over 65,000 thousand rubles.

The high cost of a kit with which you can work is not the main problem with templates for an insert-based router.

• It will not be possible to place everything compactly, and chaos in the set will affect the quality and efficiency of the service.
• Over time, more and more fittings appear, inserts for which are impossible to manufacture and cover everything.

Insert templates have their disadvantages:

1. There is an error when installing the fittings. Inserts are designed for a specific size, and any fittings have tolerances of +-0.5-1.5 mm;
2. You cannot cut hinges into the leaf and the door at the same time;
3. It will also not be possible to cut hinges into new wide boxes;
4. Unreliable and dangerous fixation with clamps;
5. Without securing the router, you can get injured;
6. There is no possibility to embed the bolt;
7. Setting the indents and positioning of the template takes about 15 minutes for each type of fittings. (information taken from video reviews).

The number of required inserts is updated every month. Old inserts for fittings that are no longer in demand will need to be constantly updated and new ones purchased. In some video reviews, door installers said that they had 300 pieces. inserts with a total weight of 40 kg. And every year there are more and more of them.

Which tool is better to buy?

Based on the above, the UVK-Profi universal template for inserting hinges and locks has no analogues. It ranks at the top of all reviews where similar models are compared. This is confirmed by reviews from professionals who have been using only this model for years.

When purchasing a tool, you should definitely opt for the improved version with a vice. It is more compact and functional than previous models.

Additional accessories

Additional work associated with the installation of interior doors includes adjusting hinges and finishing slopes.

When adjusting the hinges, the tight fit of the door leaf to the frame is checked and, if necessary, the fasteners are either tightened or loosened using screwdrivers. To complete this stage of work, you only need a set of screwdrivers.

To plaster slopes you will need a kit containing the following devices:

1. spatulas;
2. solution container;
3. Master OK;
4. a set of brushes and rollers;
5. grout kit.

Of course, it is best to use professional equipment to install interior doors: it is tested and reliable, and therefore serves as a guarantee of high-quality work. But, unfortunately, the cost of such a tool is too high.

KrepDver return guarantee:

Everything happens in life, everyone had their own school of life. Our fathers taught us to hold screwdrivers, chisels, hammers in different ways... we understand this and want you to have only good impressions from cooperation with krepdver.ru. Therefore, if you purchased installation kits from us in quantities of more than two pieces, and after trying your hand at two doors, you felt that you were in a difficult situation/you didn’t like it - call us and we will find you a good experienced installer, or you can return the remaining kits back!

Happy installation, friends!

Vista-Service LLC Technical consultant Alyaev A.V.

How to save money on tools?

Only using the right tools can guarantee high-quality installation of an interior door. Of course, the best tools will be their professional models, but choosing this approach comes with significant costs.

On the other hand, working without them, you may not achieve the desired result. For this case, there are specialized rental companies where professional tools of any complexity can be rented for a reasonable fee.

Tools and equipment rentals are divided into hand tools and power tools. The first category includes: sets of screwdrivers and chisels, tape measures, hammers, miter boxes, hacksaws, water level. Among power tools, popular rentals include miter and circulation saws, electric routers, screwdrivers, and hammer drills.

Installing an interior door is a very important process, since the door is a noticeable detail in the interior. The accuracy and speed of the process, as well as its result, is also influenced by what tool you use to install interior doors. The most proven way is to entrust this task to professionals. If this is not possible, then you...

Buy fasteners for hidden installation of door frames

REPUBLIC OF BELARUS, Minsk, st. Annaeva, 84/7, room. 4-14 9.00 - 18.00 Mon-Sat, closed Sun RUS , / / ​​Why do we need construction fasteners?

The installation of no structure can be completed without the use of this element. The durability and reliability of the entire structure depends on the quality of the fasteners used. Saving on fasteners can result in serious costs after several years of operation.

Therefore, fasteners should be purchased only from reliable suppliers, with all necessary certificates and certificates.

Hidden mounting or other types of fastening elements can be purchased in Minsk in our online store. specializes in the supply of materials for suspended ventilated facades and roofs. Here you will find a wide selection of hardware products for any job - from hidden installation

How to fasten interior doors

To make the hassle of installing new interior doors enjoyable, you need to familiarize yourself with the installation methods, as there are several of them.

First you need to prepare a set of tools, consisting of screwdrivers, a hammer, a hammer drill, a drill, and a level. For high-quality installation of the door block in the opening, you will need a set for fastening interior doors and construction foam.

In order for the trim to fit snugly against the door, you need to install the frame so that it does not recess into the doorway.

To ensure that the door frame fits firmly into the opening, wedges are used.

How to select and install a door installation kit

To install a swing interior door, you will need quite a lot of materials and tools.

Moreover, depending on the condition of the opening, the nature of the wall, the weight of the sash, and so on, different fasteners and tools may be needed.

Fastening The installation kit for installing interior doors is a universal set, since it not only includes the parts necessary for installation, but also determines a certain technology. The complete set of a door, as a rule, means fasteners, fittings - a lock, handles, some additional elements - trim, racks, etc.

Their composition is different, but is mainly determined not by the fastening of the door frame and leaf, but by the future functionality and appearance of the door block. The home craftsman has to find fasteners and tools on his own.

Installation kits for door installation

/ There are many ways to install doors, as many craftsmen as there are as many options, but installing interior doors on a system of steel brackets is perhaps the most promising, simple and reliable technology that does not require special knowledge.

In our store we offer you 4 types of installation kits for installing interior doors from Samara Installation Systems LLC: K-1.0, SMS K-1.2, SMS K-2.2 and SK-1. You simply need to select the appropriate kits for the weight of your doors and follow the instructions included with each kit.

Installation kits K-1.0 and K-1.2 are designed for interior doors with a leaf weight of up to 50 kg.

Product filter Price: Manufacturer: Sort by: −+ (0) Installation kit for installing interior doors weighing up to 50 kg “BASIC” series Article: SMS10

Installation kit for prof.

Russian patented technology for quick and high-quality installation of interior doors. Advantages of installation with this kit: 1.

The installation kit allows you to perfectly align all the gaps even after hanging the door leaf! How? Just! You have a door, but the guide screws can be screwed in and out of the doorway using a key.

What no golden hands that install doors in any other way can do!4. Significant savings on installing doors yourself. Using brackets, you can install an interior door yourself and save from 5 to 15 thousand for the entire apartment.

Pitfalls of popular hidden door installation

The fastening of the door frame to the wall is done in such a way that this fastening is not visible on the visible parts of the door.

ready-made boxes. There are several options for hidden installation, as well as special fastenings for it.

The door frame is secured with three screws.

Two under the hinges on one side, and one screw in the lock strike plate on the other side.

The upper part of the box is bursting with wooden wedges (vertically and horizontally). Space between doors the box and opening are filled with polyurethane foam.

Installation kit for installing interior doors MKS1-3D

Unlike other kits (for example, the SMS mounting kit), the design of this bracket is movable and not rigid. In addition, the bracket does not require absolute accuracy in marking before installation (and it is precisely accuracy that most often becomes the cornerstone when installing doors by amateurs). The ISS kit allows an error in markings of up to 15 mm, both sideways and up and down.

This is due to the ability of the brackets to automatically adjust to the support bolts, with all six brackets doing this independently. Therefore, if an error was made even when marking for all six brackets, this will not cause the door leaf to skew. The mounting bracket can be used both vertically and horizontally. And this, in turn, allows you to mount the door block even in the absence of a vertical technological gap.

Features of hidden installation in the door frame opening, other types of fastenings

, Replacing doors indoors is a common thing. An important point in installation is the fastening of the door frame.

This is a difficult moment, but if the instructions are strictly followed, the installation is completed efficiently in a short time.

There are different mounting options. Preparatory work must be carried out before installation. The door should close without effort, withstand nervous slamming, and not open spontaneously.

In order for the design to meet the requirements, preliminary work must be carried out correctly before installation:

1. equip with the necessary fittings,
2. cut and assemble the beams,
3. align correctly in the opening.
4. take accurate measurements
5. dismantle the old structure,

Plastic and metal-plastic door blocks are supplied fully assembled and require virtually no preparatory work.

Technology for installing interior doors using SMS kits

SMS technology for installing interior doors is fundamentally different from all currently existing ones and has a number of fundamental advantages.

All kits consist of two parts. One is installed on the box beam from the inside, the other is attached directly to the opening. When combining them into a single structure, it becomes possible to influence the process of adjusting the frame in the opening, including together with the door itself.

Moreover, this can be done as needed at any stage of installation work, using any convenient method and tool: manual, electric, or just by hand.

Consumables and accessories

To equip the door block you will need various consumables and auxiliary equipment. Their composition will differ depending on the stage of installation: dismantling the old structure, installing the frame, finishing the opening, hanging the canvas and installing fittings.

In particular, to complete the work you need to stock up on:

• files for an electric jigsaw, there are several modifications of them (for wood, for laminate, clean cutting, quick cutting, figured cutting, for metal);
• wood cutting wheels for circular saws;
• drills of various diameters for electric or hand drill;
• crown for inserting a lock into the door;
• feather drill for large holes;
• nails without heads (fastening of platbands, frame elements);
• mounting foam for filling the gap between the frame and the opening, for sound and thermal insulation, it ensures reliable fastening of the box. In addition, thanks to foam, it is possible to create a shock-absorbing layer between the wall and the block, which will compensate for changes in their geometry due to heating and cooling;
• hammer drill attachments. Chisel for chipping uneven surfaces, removing old finishing materials (ceramic tiles in the bathroom and toilet), a pick for punching holes;
• dowels for mounting the block fastenings in the wall;
• a clamp with a soft covering for clamping parts during processing;
• spacer wedges and bars for fixing the extension when installing it in a box, when filling the gaps with polyurethane foam;
• four stools for use as a support when processing boxes, trim, trim, and canvas;
• bolts (fasteners);
• glue and liquid nails;
• masking tape to protect the block from damage and contamination during finishing work;
• putty for covering joints and hiding opening defects;
• Serpyanka tape for finishing work (if plastering is planned);
• plasterboard for forming slopes;
• wallpaper, plaster, paint.

In addition, we must not forget that after installation of the structure it will be necessary to remove construction debris and dust. To do this you will need a broom, bags and a dustpan. To prevent the spread of dust, you should use plastic film and damp cloths.

Setting up the router

Inserting loops with a router begins with setting up the tool. The device itself will perform the entire operation if you set the necessary parameters on it in advance. In particular, it is necessary to set the required engine speed. And also set the desired processing depth.

To do this, you will need to bring the tool to a neutral position:

1. Place the router on a hard and level surface.
2. Loosen the feed pin lock.
3. Lower the cutter to the level of the supporting surface.
4. Set “0” on the processing depth scale.
5. Secure the pin.

Professional router Source routerforums.com

Door installation tools – measuring, manual, electric

Installing doors is considered a rather complex process, as it requires not only certain skills and dexterity in performing the work, but also the availability of a set of tools. For each specific stage of assembling door blocks or finishing panels, certain devices and power tools are intended, the correct choice of which largely determines the quality of installation of the structure.

Almost every home craftsman probably has a minimum set of tools, but sometimes you have to use special tools that are impossible to do without. For non-professionals, the purchase of expensive electrical mechanisms often becomes unjustified from a financial point of view. In this case, it will be much more profitable to rent the necessary model for just a couple of days.

Assembly and installation of the door frame

When assembling a door frame, the most difficult thing is to clearly fix its elements and install it correctly. For door trim, CMT 955.806.11 will help. Set of 2 cutters S12 D48-44 I35-44.5 mm for door trim and other CMT cutters

To install the door frame, special spacers and clamps come to the rescue:

We offer a kit for installing telescopic door frames. Door installation kit Pro (spacers, vices, supports) Wolfcraft 3676000 Do-it-yourself door installation with Wolfcraft 3676000 Advantages: Simplicity, aesthetics Disadvantages: I can’t advise anyone who is a pro, there may be some shortcomings here, but for a self-taught person it’s the best Comment: Installed with this kit (plus, of course, my own additional clamps and other tools) doors in my mother-in-law’s apartment. The cost of the set has long since paid off. The task was completed quickly (not immediately, of course) and aesthetically. It is better to take two-component foam (dries quickly and stores well). Try it too. Good luck. March 17, 2022 Georges

We offer a quick-clamping device (workpiece thickness from 6 to 80 mm) SP270R VIRUTEX 7000400, which allows you to firmly fasten any workpiece (panel, door, etc.) to ensure safety and ease of use.

Assembling the door frame

The kit includes three main strips and an additional one for temporary fastening. At the ends of the main elements of the door frame there may be plastic clips in special grooves. We carefully knock them out by hitting the attached wooden peg with a hammer. For clarity, it is better to do this process together with the door, in the same position in which it will be in place. The grooves on the elements must match.

Fastening is done using previously knocked out plastic elements. We hammer the elements with a hammer and use the same peg when finishing them off so as not to damage the box. If the planks have moved much, we return them to their place by hitting the plank with a hammer.

If special fasteners are not provided in the design, assembly is carried out using self-tapping screws.

In fiberboard, screws are screwed into pre-drilled holes. The diameter should be 0.5 less. For example, for 3.5 screws, use a 3 drill.

It is advisable to place the attachment point exactly in the middle of the end of the vertical element. The end strips must be placed strictly in line; if there is a discrepancy, it is necessary to turn the mismatched element over with the other end.

If necessary, we secure the bottom of the box with a special spacer bar. We measure the width similar to the top with a tape measure, apply a wooden plank and fix it in those places that will be hidden by the wall during subsequent installation.

The screw should not be screwed in from the edge of the plank, as this may split it. The fastener is made at an angle and not all the way to the cap. In this case, it is necessary to ensure that the already fixed part does not become distorted. You need to control this using a corner.

Fitting the box and accessories

The main problem when assembling a door frame is to make the joints correctly. Crossbars and jambs, as a rule, have a profiled structure, so the most difficult thing is to make cuts exactly at 45 degrees. In practice, novice door installers actively use hand miter boxes:

Useful to have:

• Protractor and miter box in one (max. plinth height 70 mm) for measuring and taking angles from 85 to 180 degrees Wolfcraft 6948000
• Angle/bevel copier TC133R VIRUTEX 3345634

And more experienced professionals work with miter saws: And undoubtedly the best choice here is the FESTOOL KAPEX 120 saw

Installing the assembled frame in the doorway

We level its position using a building level. We mark the proposed places for attaching the structure to the wall, on the planks themselves and on the wall.

The end decorative strip is removed. Drill 5-6 holes on each side with a wood drill. If a metal drill is used, it can be used to mark the wall by applying light pressure to the drill after the box has been drilled. The distance between the holes is 30-50 cm.

The structure is removed from the doorway. The concrete or brick wall is drilled with a hammer drill using a 6 mm concrete drill. Dowels are driven into the finished holes.

It is recommended to make the hole in a concrete or brick wall 2-3 cm larger. When driving the dowel, crumbs and sand from the wall will collect in an additional place and will not block the dowel.

When drilling a brick wall, it is desirable that the holes fall exactly into the body of the brick; dowels are very difficult to hold in masonry seams.

Hidden door installation steps

It is important to install the frame and hidden door leaf correctly. You need to know in what sequence what actions are performed. Installation algorithm:

• Preparing the doorway.
• Installation of the box in the finished passage, door leaf.
• Gap adjustment.
• Finishing.

Preparing the doorway

The doorway must match the dimensions of the hidden door. The width should be 10 cm larger than the door structure. For example, the width of the door frame of a hidden door is 70 cm. This means that the passage for its installation must be made 80 cm wide. The height of the opening is made 6-8 cm more than the door from the floor and taking into account the threshold. For example, the height of the door block is 200 cm. The passage under it should be 208 cm. If the opening does not meet the required parameters, it is narrowed by blocks or expanded by cutting out the excess part. Be sure to level it. The sides must be parallel.

Installation of a hidden door frame

Installation of hidden door models is simple. The main thing is to do everything according to the instructions. The installation algorithm for the door frame and panel of the hidden model is given below:

• We drill holes in the passage for fasteners for the box.
• We install the box in the same plane with the wall along the front edge.
• We fix the box with fasteners.
• We hang the canvas.
• We check the opening and closing of the sash.
• We set the position of the sash by adjusting the hidden hinges.
• We set the required gaps.
• We foam the space between the box and the passage.

Allowable clearances

The gap parameters are given in GOST. They should be adhered to for the normal functioning of the door and its long-term operation. On the lock side the gap should be a few millimeters. On the side of the canopies it is usually made smaller. A gap of 2-3 mm is recommended. 2-3 mm are also left at the top and bottom.

Facing

There are different options for finishing hidden doors after installation. The simplest and cheapest way of cladding is painting. Manufacturers produce special invisible doors for painting. It is possible to create a covering from plasterboard. You can plaster the canvas or cover it with wallpaper. The option is selected based on the design of the room’s walls and interior. It is important to finish the door only after the construction foam has dried and been trimmed.

Non-standard

The set of hidden doors includes special hinges. They are suitable for door leaves whose weight does not exceed 40 kg. Usually installed in the amount of three pieces. If a door of non-standard dimensions is being installed, then the panel is divided into three hinges.

Box fastening

The box is secured using a screwdriver, electric drill or screwdriver. The structure is re-placed in the doorway. If there are large gaps between the opening and the frame, then wedges are placed near the holes so that the canvas does not sag when twisted.

During the tightening process, the correct position is periodically checked. It is advisable to first attach the top and bottom on each side, and then all the holes in the middle.

It is recommended to fill the gap between the wall and the box element with mounting foam to improve sound insulation and prevent drafts. This process must be carried out when the door leaf is in the opening. In this case, deformation of the entire structure is eliminated

If the end decorative strip cannot completely snap into place due to loosely fitting screw heads, recesses are made in the surface before screwing in using a larger diameter drill (2 mm).

Features of installing a hidden door “from yourself”

The reverse opening door requires additional preparation of the passage. It is necessary to cut an opening on the front side 4-6 cm wide and 1 cm deep. A wide wing of the box will be installed in it. The door kit is supplied already with cuts for the lock and hinges. The stands are cut at an angle of 45 degrees. The assembled box is installed in the opening. The canvas is hung on it and adjusted with loops.

Installation of interior sliding doors

A sliding door is one of the options for sliding interior doors. Unlike a double-leaf design, an interior sliding door can be single-leaf, three-leaf or even four-leaf. Moreover, one or two canvases can move. Installation is carried out in the same order as for a sliding door in accordance with the manufacturer's instructions.

Sliding doors save space in small spaces

Design features of hidden doors

The invisibility effect of hidden interior doors is due to the peculiarities of their design. The door frame is made of a special type of aluminum profile. Hidden hinges included. They are also called bars. The peculiarity of such hinges is that they are not visible at all from the outside of the door. The door frame does not include decoration with platbands. The door leaf is normal.

Installation of sliding door structures

A characteristic feature of sliding interior doors is the movement of the door leaf along a support profile located on the floor. Installation is carried out after finishing the floor. The guide profile is installed in parquet, laminate, ceramic tiles or other floor covering. Often the door leaf is hidden in a wall cavity specially prepared for this purpose.

Before installing the sliding door, a false wall is built to hide the door

There are options for making a false wall or a plasterboard box for sliding interior doors. But in any case, the suspension mechanism remains identical to that of all other types of sliding doors.

Using direct hangers

Suspensions used for plasterboard and suspended ceilings are suitable for installation. The suspension plates are attached to the box, after which the structure is inserted into the opening. Using plumb lines and a level, the location of the door relative to the vertical and horizontal is adjusted. Next, the plates are fixed, the gaps between the wall and the box are foamed with polyurethane foam.

This method is suitable for doors of light weight and in the absence of fine finishing of the walls.

Installation of sliding interior doors

Sliding interior doors save space in small spaces. But their installation requires certain conditions, the main one of which is the availability of space to move the door leaf. Sliding doors can be single-leaf or double-leaf. The supporting rocker mechanism is usually located on top, and a restrictive profile is mounted below, which prevents the canvas from swaying during movement.

When planning, various options for positioning the canvas in the doorway are used.

Installation of glass doors

Glass doors are a very original solution for interior decoration. Like doors made of other materials, they come in swing and sliding types. In private residential construction, swing type glass doors are usually used. In general, the principle and procedure for their installation does not differ from the standard one, but there are several features.

1. The glass door leaf cannot be adjusted to dimensions; it cannot be sawed or cut . Therefore, to avoid mistakes, doors are ordered after finishing the walls and doorway (when the dimensions will no longer change).
2. Installing a door is not a task you can do alone. The weight of the glass sheet is usually from 50 to 70 kg; it is difficult and dangerous for one person to manipulate such a sash.
3. A glass interior door is mounted on a wooden or metal frame.
4. The durability of glass doors is limited only by the wear resistance of the hinges. Pendulum hinges are considered the most reliable.

To assemble the glass door hanger, mounting holes are cut in the door leaf at the factory.

Holes for installing hinges are cut at the glass door manufacturer. You need to drill holes for the lock and handle yourself, using a glass drill of the required diameter.

Holes in the glass are drilled with special drills at low speeds

The advantage of glass interior doors is their almost unlimited service life. Their appearance is not subject to mechanical or chemical influence, the strength of the glass block is comparable to the strength of metal. The only thing that needs to be monitored is the safety of the hinges and fittings. Timely lubrication and removal of contamination are two necessary conditions for long-term operation of glass interior doors.

Latch installation features

It is not very often that a full-fledged lock is installed on interior doors. More often you have to install a latch - a handle with a tongue. It is smaller in size and inserting it is much faster and easier.

1. We mark the installation height of the latch at the end of the door, and transfer the marks to both sides of the door leaf.
2. Using a square, we measure the distance from the beginning of the strip to the center of the hole for installing the central pin (square section). Using a square, we transfer this distance to the marks. There is a second way - attach the latch body to the door so that the center of the hole and the drawn line coincide, and put a mark through the hole with a pencil.

   
   We measure the distance from the beginning of the plate to the center of the hole

3. Using a 23 mm pen or a 25 mm crown, we make holes in the end of the door, placing the point of the drill in the center of the mark (to prevent it from moving, you can mark it with an awl). The depth of the hole is equal to the length of the latch body + 2-4 mm.

   
   The second way to make a mark for the pen shaft

4. We change the drill to 20 mm, make holes in the door leaf on both sides, setting the peak at the designated points.

   
   At the end of the door, use a feather drill to drill a hole for the latch cylinder.

5. We put the latch cylinder in place and secure it.
6. We install handles and linings, as in the previous version.

Installing a latch on an interior door is even faster and easier than a lock. There is very little work. You can do it in 20 minutes. And this is completely without experience.

Installation of fittings on interior doors

Installation of fittings is perhaps the most crucial moment in installing interior doors. It is when performing this part of the work that errors occur, leading to rapid breakdowns. Therefore, when starting self-assembly, you need to get ready for painstaking “jewelry” work. Mistakes are too expensive.

So, the accessories include:

• door hinges of various types and designs

The design of door hinges affects how they are installed

• door locks (overhead and mortise);
• door handles (there are rotary and stationary);
• bolts;

A variety of door fittings helps to decorate any interior door

• door rollers (in sliding, sliding and sliding doors).

All elements of fittings require precise insertion into the plane of the door leaf or frame, and this presents a certain difficulty for novice carpenters. The permissible error cannot be exceeded by more than 1 mm . Otherwise, there are no firm guarantees for the stable operation of the mechanisms.

Sampling is done manually (with chisels) or using power tools. At this stage of work, a manual electric router is used.

Thanks to its high-speed operation, the router makes neat and clean cuts in wood

How to check the correct installation of an interior door

Anyone who has to install interior doors for the first time asks questions: is the door installed correctly and what needs to be done to make it last long and properly. There is a comprehensive answer to them, which consists of two points.

1. A sign of correctly carried out installation is the same technological gaps around the perimeter of the entire canvas. This means that if the gap around the sash is the same size everywhere, the canvas is hung correctly.
2. The door must pass a small test. When opening (and closing) the canvas, no extraneous sounds, creaks, or rustles (friction of one surface against another) should be heard. The sash moves easily, without any effort. If the hand stops, the canvas also stops; it should not move on its own.

If these two conditions are met, the door is installed in accordance with technical and operational standards.

Sources

• https://GoldDveri.ru/mezhkomnatnye-dveri/komplekt-instrumenta-dlya-ustanovki-mezhkomnatnyx-dverej.html
• https://oknoportal.com/instrument-dlya-ustanovki-dverej/
• https://remontonly.ru/kakoj-nuzhen-instrument-dlya-ustanovki-mezhkomnatnyh-dverej.html
• https://legkovmeste.ru/stroitelstvo-i-remont/dveri/ustanovka-mezhkomnatnyih-dverey.html

[collapse]

Optional equipment

Before using the doors, you need to check them for tight fit to the door frame, how tightly fastened the fasteners are and, accordingly, loosen or fasten them stronger.

In addition to the tools and materials listed above, it is worth considering a set of additional equipment. This includes:

• Drills of different diameters;
• Files for electric jigsaw;
• Chisels for hammer drill;
• Disc wheels with diamond chips for grinders;
• Masking tape.

Door kits do not always include fittings.
Therefore, in some cases you have to worry about purchasing it. It is more profitable to take a quality one from the beginning. Because later it will last for many years. To install an interior door, you not only need to buy it and have a set of screwdrivers and a hammer drill at home, but also many other devices, materials and tools that will make installation easier. Each element must be of high quality and guarantee a long service life.